Device alarm halts/stop​s when start the camera on the blackberry device

Hi,
        I have set the device alarm using the AlarmUti.java . The Alarm works fine.
        But on my device when starts camera, Alarm stops immediately. On some other
        blackberry devices, if press any other hard buttons, the Alarm stops.
        How do we prevent this ? i would like to stop only when i use the AlarmUtil.java
        I appriciate your help in solving this issue.        
Thanks,
Subbanaidu.

Recieved my machine today to discover that I am having the same issue! I hope this is malfunctioning software. 

Similar Messages

  • "Stop Sign" when starting the mac after reinstallation...

    Hello,
    I had a problem with my mac mini OS X Lion, the  problem was that some symbols started to change places and dissapear. so i called the apple support and they tryed to help me for 1.5h on phone without success, the last thing they told me to do was to erase the disk and totaly reinstall the OS, so i did.
    it was downloading for about 5h and when i checked it the day after it was a "stop sign" on the screen so i waited for another day and the sign was still there,so i hold in the start buttom to force it to turn of and started again, the apple sign showed up for about 30sec - 1 min and then the stop sign appeared again....
    i also tryed to start it with holding in the mac buttom and R, and also D when clicking on the start buttom without success..
    did anyone else experience this ****?
    If so please give me some tips so my lovely mac can come back to life.
    Kind Regards
    Ompaa

    OK, sounds like things aren't as bad as I feared. Could be a problem with your internet connection. In any case, start again.
    Follow this guideline EXACTLY (http://support.apple.com/kb/HT4718):
    The short version:
    Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears.
    After the Recovery HD has finished starting up, you should see a desktop with a Mac OS X menu bar and a "Mac OS X Utilities" application window.
    In order to reinstall OS X Lion, you will need to be connected to an Ethernet or Wi-Fi network. The Wi-Fi menu item is in the upper-right corner of the screen. Click the icon to display all available Wi-Fi networks. Click your preferred network name and, if needed, enter a username and/or password for your wifi.

  • When starting the computer I get the dong but then it stops with three loud beeps as the light in the front flashes in line with the beeps. The beeps repeat till switching off

    When starting the computer I get the dong but then it stops with three loud beeps as the light in the front flashes in line with the beeps. The beeps repeat till switching off

    Check out this Apple support article https://support.apple.com/kb/HT1547

  • How do you stop all word documents from popping when starting the apple mac

    When starting the computer a blank new words page, powerepoint, excel and everything pops up. How can I stop this please?

    It's not an Apple product and there isn't a Microsoft forum here.
    http://support.microsoft.com/ph/12853

  • TimeZone issues when starting the OEM Agent since summertime switch Germany

    Hello gurus,
    since yesterday when the system time has swithched to summer time in Germany I have below errors when starting the agents on our systems:
    ****@*****: /oracle > su - ora*** -c /oracle/product/agent10g/bin/emctl start agent
    Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Starting agent ....... failed.
    The agentTZRegion value in /oracle/product/agent10g/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
    If you modified the timezone setting in the environment, please stop the agent and exectute 'emctl resetTZ agent' and also execute the script mgmt_target.set_agent_tzrgn(<agent_name>, <new_tz_rgn>) to get the value propagated to repository.
    Consult the log files in: /oracle/product/agent10g/sysman/log
    So I tryed the suggested resetTZ, but get below errors:
    root@******: /oracle/product/agent10g/sysman/log > su - oradeu -c /oracle/product/agent10g/bin/emctl resetTZ agent
    Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    Updating /oracle/product/agent10g/sysman/config/emd.properties...
    ----- Mon Mar 31 10:18:48 2008::tzOffset for +01:00 is 60(min), but agent is runnning with tzOffset 120(min)
    ----- Mon Mar 31 10:18:48 2008::trying again after waiting for 1 sec to account for daylight transition
    ----- Mon Mar 31 10:18:48 2008::tzOffset for +01:00 is 60(min), but agent is runnning with tzOffset 120(min)
    resetTZ failed.
    The agentTZRegion in:
    /oracle/product/agent10g/sysman/config/emd.properties
    is not in agreement with what the agent thinks it should be.
    Fix your environment.
    Pick a TZ value that corresponds to time zone settings listed in:
    /oracle/product/agent10g/sysman/admin/supportedtzs.lst
    I checked the TZ settings:
    *****> echo $TZ
    MEZ-1MSZ,M3.5.0/02:00:00,M10.5.0/03:00:00
    *****: /oracle/product/agent10g/sysman/config > more emd.properties|grep agentTZ
    agentTZRegion=+01:00
    which is the reason for the difference of 120min as shown by the resetTZ I assume because AIX system time says MEZ -1 and emd.properties finds GMT+1 which gives a difference of 120min.
    I already applied the patch 5632264 to the agent, but the issue still exists.
    When I manipulate the envirement TZ to GMT+01:00 the agent starts again, but this is no solution. Also patching the TZ of UNIX/AIX is no solution because this will cause other issues.
    Any ideas how I can get the agent working again?
    ps. I already tried a reinstallation of the Agent, but the issue still exists.
    Thank you
    F.Wittmann

    Hello,
    I already installed the DST patch v4. see my first post.
    Below I attached the logs from starting the agenent since crash:
    emctl.log (since start until crash)=
    1310886 :: Thu Apr 3 10:29:31 2008::AgentLifeCycle.pm: Processing status agent
    1310886 :: Thu Apr 3 10:29:31 2008::AgentStatus.pm:Processing status agent
    1310886 :: Thu Apr 3 10:29:31 2008::AgentStatus.pm:emdctl status returned 1
    1462412 :: Thu Apr 3 10:29:41 2008::AgentLifeCycle.pm: Processing start agent
    1462412 :: Thu Apr 3 10:29:41 2008::AgentLifeCycle.pm: EMHOME is /oracle/product/agent10g
    1462412 :: Thu Apr 3 10:29:41 2008::AgentLifeCycle.pm:status agent returned with retCode=1
    1462412 :: Thu Apr 3 10:30:37 2008::AgentLifeCycle.pm: Exited loop with retCode=4
    1003654 :: Thu Apr 3 10:35:00 2008::AgentLifeCycle.pm: Processing status agent
    1003654 :: Thu Apr 3 10:35:00 2008::AgentStatus.pm:Processing status agent
    1003654 :: Thu Apr 3 10:35:02 2008::AgentStatus.pm:emdctl status returned 3
    1536132 :: Thu Apr 3 10:38:26 2008::AgentLifeCycle.pm: Processing status agent
    1536132 :: Thu Apr 3 10:38:26 2008::AgentStatus.pm:Processing status agent
    1536132 :: Thu Apr 3 10:38:26 2008::AgentStatus.pm:emdctl status returned 1
    emdctl.trc (since start until crash)=
    2008-04-03 10:29:41 Thread-1 WARN http: snmehl_connect: connect failed to (sat141:3872): A remote host refused an attempted connect operation. (error = 79)
    2008-04-03 10:29:41 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://*****:3872/emd/main/. Returning status code 1
    2008-04-03 10:37:05 Thread-1 WARN http: snmehl_connect: connect failed to (sat141:3872): A remote host refused an attempted connect operation. (error = 79)
    2008-04-03 10:37:05 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://*****:3872/emd/main/. Returning status code 1
    2008-04-03 10:38:26 Thread-1 WARN http: snmehl_connect: connect failed to (sat141:3872): A remote host refused an attempted connect operation. (error = 79)
    2008-04-03 10:38:26 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://*****:3872/emd/main/. Returning status code 1
    emagent.log (since start until crash)=
    2008-04-03 10:31:13 Thread-1 EMAgent started successfully (00702)
    2008-04-03 10:37:04 Thread-1670 <Upload Manager> Unsuccessful Upload attempts for XML file exceeds specified limit=3, Agent will shutdown (00851)
    2008-04-03 10:37:04 Thread-1 EMAgent abnormal terminating (00704)
    emagent.trc (since start until crash)=
    2008-04-03 10:35:16 Thread-1076 WARN TargetManager: Regenerating all Metadata
    2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
    2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
    2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
    2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
    2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
    2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
    2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
    2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
    2008-04-03 10:36:48 Thread-1076 WARN collector: Regenerating all DefaultColls
    2008-04-03 10:36:58 Thread-1076 ERROR upload: Failed to upload file A0000003.xml, ret = -6
    2008-04-03 10:36:58 Thread-1076 ERROR upload: 3 Failures in a row for A0000003.xml, we give up
    2008-04-03 10:36:58 Thread-1076 ERROR upload: Error in uploadXMLFiles. Trying again in 72.00 seconds or earlier.
    2008-04-03 10:37:04 Thread-1670 WARN upload: FxferSend: received fatal error in header from repository: https://stloem2:1159/em/upload
    FATAL_ERROR::500|ORA-20603: Updating timezone region of a target is not supported. Use mgmt_target.set_agent_tzrgn() API to modify the timezone region.(target name = sat141:3872)(target type = oracle_emd)(new tzrgn = MET)(old tzrgn = +01:00)
    ORA-06512: at "SYSMAN.CHECK_DUPLICATE_TARGETS", line 92
    ORA-04088: error during execution of trigger 'SYSMAN.CHECK_DUPLICATE_TARGETS'
    2008-04-03 10:37:04 Thread-1670 ERROR upload: number of fatal error exceeds the limit 3
    2008-04-03 10:37:04 Thread-1670 ERROR upload: agent will shutdown now
    2008-04-03 10:37:04 Thread-1670 ERROR : Signalled to Exit with status 55
    2008-04-03 10:37:04 Thread-1 ERROR main: EMAgent abnormal terminating
    =======================================================
    when I run emctl config agent getTZ it returns me GMT+01:00,
    but with this value the agent does not start, oly with MEZ....
    root@******: /oracle/product/agent10g/oracore/zoneinfo > su - oradeu -c /oracle/product/agent10g/bin/emctl config agent getTZ
    Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    GMT+01:00
    Kind regards
    F.Wittmann

  • Error when starting the Integration Repository/Directory

    When starting the Integration Repository or Directory I get the following error message when the Java Web Start is launched:
    <i>JAR resources in JNLP file are not signed by same certificate</i>
    I am running on XI3.0 SP15
    Any idea?
    Thanks in advance.
    Kind regards,
    Dave Arends

    Solved this issue.
    Go to Administration - Java Web Start Administration.
    Click on 'Re-initialization and force signings' and start the Repository or Directory again.

  • Error 8 when starting the extracting the program-data load error:status 51

    Dear all,
    <b>I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). </b>The scenario and related setting are as the flowings:
    A. Setting:
    We have created 2 source system one for the development and another for the quality in BW development client
    1. BW server: SAP NetWeaver 2004s BI 7
    PI_BASIS: 2005_1_700 Level: 12
    SAP_BW: 700 Level:13
    Source system (Development Client 220)
    2. SAP ERP: SAP ERP Central Component 6.0
    PI_BASIS: 2005_1_700 Level: 12
    OS: SunOS
    Source system (Quality Client 300)
    2. SAP ERP: SAP ERP Central Component 6.0
    PI_BASIS: 2005_1_700 Level: 12
    OS: HP-UX
    B. The scenario:
    I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
    After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system – , but now I am unable to load the Info provider from the (Development Client 220),
    Source system Creation:
    For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
    1: Now while at the Info Package : Start data load immediately and then get the
    e-mail sent by user RFCUSER, and the content:
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    2:Error in the detail tab of the call monitor as under,
    <b>bi data upload error:status 51 - error: Error 8 when starting the extracting the program </b>
    Extraction (messages): Errors occurred
      Error occurred in the data selection
    Transfer (IDocs and TRFC): Errors occurred
    Request IDoc : Application document not posted (red)
      bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                    IDoc sent to SAP system or external program"
      r<b>/3 side: status 51:  IDoc: 0000000000012140 Status: Application document not posted
                                   Error 8 when starting the extraction program</b>
    Info IDoc 1 : Application document posted (green)
       r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                     IDoc sent to SAP system or external program"
       bw side: "IDoc: 0000000000007089 Status: Application document posted,
                     IDoc was successfully transferred to the monitor updating"
    Have attached screen shots showing error at BW side.
    •     check connection is ok, tried to restore the setting for bw-r3 connection – though same problem
    •     Have checked partner profile.
    <b>what's wrong with the process? </b>
    Best regards,
    dushyant.

    Hi,
       Refer note 140147.
    Regards,
    Meiy

  • Security Error when starting the server - WPLS 7.0

    Security Error when starting the server - WPLS 7.0
    what may be the reason ...
    console :
    BUILD SUCCESSFUL
    Total time: 3 seconds
    Starting WebLogic Server...
    <May 30, 2005 4:22:15 PM IST> <Notice> <Management> <140005> <Loading configuration C:\cpDomain\.\config.xml>
    <May 30, 2005 4:22:18 PM IST> <Info> <Logging> <000000> <FileLogger Opened at C:\cpDomain\portalServer\weblogi
    c.portalServer.log>
    <May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The RoleMapper provider has preexisting LDAP data.>
    <May 30, 2005 4:22:21 PM IST> <Info> <Security> <090516> <The Authorizer provider has preexisting LDAP data.>
    <May 30, 2005 4:22:21 PM IST> <Info> <Security> <090143> <The weblogic keystore provider DefaultKeyStore in re
    alm cprealm cannot be used for private keys because its configured private key keystore file wlDefaultKeyStore
    .jks does not exist.>
    <May 30, 2005 4:22:21 PM IST> <Info> <Security> <090142> <The weblogic keystore provider DefaultKeyStore in re
    alm cprealm cannot be used for trusted (root) CAs because its trusted (root) CA keystore was not configured.>
    <May 30, 2005 4:22:21 PM IST> <Notice> <Security> <090082> <Security initializing using realm cprealm.>
    <May 30, 2005 4:22:21 PM IST> <Critical> <WebLogicServer> <000364> <Server failed during initialization. Excep
    tion:java.lang.SecurityException: Authentication for user weblogic denied
    java.lang.SecurityException: Authentication for user weblogic denied
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
    agerDelegateImpl.java:411)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
    ateImpl.java:539)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
    at weblogic.Server.main(Server.java:32)
    >
    <May 30, 2005 4:22:21 PM IST> <Emergency> <WebLogicServer> <000342> <Unable to initialize the server: Fatal in
    itialization exception
    Throwable: java.lang.SecurityException: Authentication for user weblogic denied
    java.lang.SecurityException: Authentication for user weblogic denied
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
    agerDelegateImpl.java:411)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
    ateImpl.java:539)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
    at weblogic.Server.main(Server.java:32)
    >
    The WebLogic Server did not start up properly.
    Exception raised:
    java.lang.SecurityException: Authentication for user weblogic denied
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
    agerDelegateImpl.java:411)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
    ateImpl.java:539)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
    at weblogic.Server.main(Server.java:32)
    Reason: Fatal initialization exception
    Throwable: java.lang.SecurityException: Authentication for user weblogic denied
    java.lang.SecurityException: Authentication for user weblogic denied
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doBootAuthorization(SecurityServiceMan
    agerDelegateImpl.java:411)
    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDeleg
    ateImpl.java:539)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:917)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
    at weblogic.Server.main(Server.java:32)
    C:\cpDomain\bin>
    Thanks
    Thanks & Regards,
    Siva VP,
    [email protected]

    Looks like you cannot connect to LDAP. Are you configured correctly?

  • Error 8 when starting the extraction program

    HI all
    I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
    Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
    Regards
    alex

    Alex,
    Check the following OSS notes
    947690
    511475
    23538
    Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
    Abdul

  • JVM Initialization Error when Starting the Second Managed Server

    Hi,
    I am getting the below error when starting the 2nd Managed server on Solaris X86 machine.
    starting weblogic with Java version:
    java version "1.5.0_17"
    Java(TM) Platform, Standard Edition for Business (build 1.5.0_17-b04)
    Java HotSpot(TM) Client VM (build 1.5.0_17-b04, mixed mode, sharing)
    Starting WLS with line:
    /usr/jdk/instances/jdk1.5.0/bin/java -client -Xms256m -Xmx512m -XX:CompileThre shold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -da -Dplatform .home=/beafiler/weblogic10g/bea/wlserver_10.0 -Dwls.home=/beafiler/weblogic10g/b ea/wlserver_10.0/server -Dweblogic.home=/beafiler/weblogic10g/bea/wlserver_10.0/ server -Dwli.home= -Dweblogic.management.discover=false -Dweblogic.management.s erver=http://test_admin:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false - Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/beafiler/weblogic10g/bea/patch_wss 110/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patch_w lw1021/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/patc h_wls1002/profiles/default/sysext_manifest_classpath:/beafiler/weblogic10g/bea/p atch_cie640/profiles/default/sysext_manifest_classpath -Dweblogic.security.provi ders.authentication.LDAPDelegatePoolSize=50 -Dweblogic.Name=wls_test2 -Djava.sec urity.policy=/beafiler/weblogic10g/bea/wlserver_10.0/server/lib/weblogic.policy weblogic.Server
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Can any one please help me troubleshoot this?
    Edited by: user4877326 on Jul 13, 2010 1:33 PM

    Hi P.k,
    The table QRTZ92_TRIGGERS is there in the database.But while trying to run this command (UPDATE QRTZ92_TRIGGERS set NEXT_FIRE_TIME=1 where NEXT_FIRE_TIME < 0)in database i am getting the table or view does not exist.
    What is GTC resource?
    OIM version - 11.1.1.5.0.
    -Deena.

  • Failed to execute with the error Error occurred when starting the parser: t

    Dear All
    I am getting this error
    ""A database error occurred. The database error text is: The MDX query SELECT  { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH].[LEVEL01].MEMBERS, [DASKFZ1TRFOLNTG78G0HH2B87].MEMBERS ), [0MATERIAL].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ), [0COMP_CODE].[LEVEL01].MEMBERS ), [0ACTDELDATE].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION ON ROWS FROM [0IC_C03/ZMATSTOCK]  failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)""
    I already went to similar kind of error solution in forum,but this error is coming for one web I query,all other reports are working fine.
    I already implemented note 1032461

    Hi,
    Under normal circumstances it should be enough to restart the connection service.
    As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
    Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
    All the Best,
    Madhu....

  • When starting the Add-on: Connection timed out issue

    When starting the Add-on: Connection timed out issue
    Hi,
    We have a client in SAP 2005 PL 44.
    I built the add-on for them using simple installer wizard ( I tried advanced set-up also).
    When starting the add-on, I get the message 'Connection Timed Out'.
    Add-on status is failed.
    But the add-on is actually connected. i.e, The functionality associated with the add-on is working fine.
    I had SAP 2007 before and un/reinstalled SAP 2005 in order to connect with this client.
    I had built the same add-on in a similar way for the same client for lot many times in the past, but I never got this issue.
    I tried the following:
    1) Delete SM_OBS_DLL and un/reinstall DI API
    2) un/reinstall B1DE
    Always I'm getting this error.
    Please let me know your inputs.
    Thanks.
    Geetha

    Hi Geetha,
    The timeout issue has been discussed quite a bit already on this forum. Please do a search or look at these threads:
    Timed Out Error with ADDON
    Addon Connection Timed out
    Regards
    Aravind

  • 'Error 8 occurred when starting the data extraction program'

    Hello Experts,
    I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
    So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
    But when I check the extractor through RSA3, it looks fine.
    Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
    Thanks
    Regards,
    KP

    Hi,
    Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
    Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
    rgds,
    Edited by: Krishna Rao on May 6, 2009 3:22 PM

  • When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?

    When starting the Migration Assistant on my pc, after a few seconds it says "An error occurred while preparating your information for transfer" what should i do ?

    Restart both computers then try again.
    Switch Basics: Migrate your Windows files to your Mac

  • Error 8 when starting the extraction program (BI7.x)

    I am receiving the following message when loading from the ODS to the data targets:
    Error 8 when starting the extraction program
    Message no. R3019
    Diagnosis
    Error 8 occurred when starting the data extraction program.
    System response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or create a problem message of your own.
    I have searched the forums and OSS, and can't find anything that matches my situation exactly.  I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system.  I restored the BIP client and all transfer structures were reactivated.  Now when I try to load, I get this error 8.  Has anyone experienced this issue?
    Thanks,
    Pam

    Josko,
    I am also using BI 7.x and had the problem loading from DSO to Infocube.  What are the entries in table ROIDCPRMS?  What is the host name displayed when you run transaction SM51 in the BI system?
    Pam

Maybe you are looking for