Device and printers long time to open iprint printers
Hi all,
We have some laptops (windows732bit iprint client 5.92/5.94) that go offsite each night and have found that when opening devices and printers, or word etc that check the printers and can take a long time to respond/show the printers. No doubt this is because of the ipp printers installed from iprint, the less amount of network printers the quicker it opens etc.
Is there a way to shorten/eliminate the timeout for checking of network printers at all?
Thanks.
Originally Posted by clarja
Hi all,
We have some laptops (windows732bit iprint client 5.92/5.94) that go offsite each night and have found that when opening devices and printers, or word etc that check the printers and can take a long time to respond/show the printers. No doubt this is because of the ipp printers installed from iprint, the less amount of network printers the quicker it opens etc.
Is there a way to shorten/eliminate the timeout for checking of network printers at all?
Thanks.
Hi,
try the latest client there is a fix a "slow issue" not sure if it's the same issue that you have but worth a try:
Fixes introduced in the 5.96 iPrint Client
Print Spooler Crash with WinXP/Win7 and 5.94 iPrint Client. (See TID 7014728)
iPrint client 5.94 slow updating windows printer properties page (Bug 865327)
On these computers, what printer model is installed and what driver + version are they using?
Thomas
Similar Messages
-
My mac shutdown suddenly fr0m time to other and take long time to open
hi everybody,
I think i have big problem ,i have macbookpro I5 13" early 2011 , i just changed the board to I7 ( used board got it from net ) after USB ports in my original logicboard are damaged due to drop , after changing the board the mac is unstable, it take long time(half hour!) to show up anything after press power, yes I press power and there are no response from the mac (black monitor as its ) , just i hear a noise from the empty CD drive . once it open it work fine for a while (may 2 hours or more ) and then shutdown suddenly! and you have wait more than half hour to open it again if im lucky.
Itried to rest the mac many times, replace the RAM places , i thought may the problem come from overheating the CPU, i monitored the CPU tempreture just before the suddenly shutdown was 57C
please help ,any suggetions ?Run an Apple hardware Test:
support.apple.com/kb/ht1509http://
You may have to use OPTION D to start it.
See what that picks up.
You may also bring the MBP to an Apple store or AASP for a diagnostic evaluation.
Ciao. -
Help
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 250
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
Hitachi HTS545032B9A302 disk0 : (320,07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper UNKNOWN Hidden (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Stickies Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 8 Update 31 Check version
FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
AdobePDFViewer: Version: 10.1.13 [Click for support]
Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.1.1 [Click for support]
Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
DivX HiQ
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 60
Oldest backup: 2012-07-15 01:16:54 +0000
Last backup: 2015-03-29 19:28:06 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
97% rapportd
3% WindowServer
1% mds
0% fseventsd
0% distnoted
Top Processes by Memory: ℹ️
155 MB Safari
120 MB Finder
86 MB rapportd
86 MB WindowServer
69 MB mds_stores
Virtual Memory Information: ℹ️
12.56 GB Free RAM
2.53 GB Active RAM
428 MB Inactive RAM
1.66 GB Wired RAM
1.04 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 31, 2015, 06:00:15 PM Self test - passed
Mar 31, 2015, 01:13:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
Mar 31, 2015, 01:05:42 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
Mar 31, 2015, 12:24:33 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
Mar 30, 2015, 05:45:38 PM /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
Mar 30, 2015, 01:52:07 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
Mar 29, 2015, 05:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
Mar 29, 2015, 01:06:38 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
Mar 29, 2015, 01:02:47 PM /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hangOpen Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Firefox takes very long time to open and often crashes for some websites
i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
== Troubleshooting information ==
how can firefox be ready for use at first click?Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
AP Trial Balance - File is massive and takes a long time to open up
Hello,
We are upgrading from 11.5.10 to 12.1.3 and are running into some serioud problems with the Accounts Payables Trial Balance report in Detail Mode.
1. The Report takes upwards of 10 minutes to open up - and in many cases does not.
2. On further research we see that the report output file is > 500MB whereas comparable 11i Trial Balance files are only 19MB.
3. We tried running in various formats Text, PDF, HTML with no luck.
4. In fact HTML and Text formats gave “Authentication failed” errors when we tried to open the report.
My questions are:
1. Why is there a such a large increase in file size? Is this expected going to R12?
2. Is there a way to speed up the opening of the large files or create smaller files? - (summary mode, and smaller date ranges are not options as per business needs). Even a 2 month date range give the same problems.
3. We noticed that the XLA_TRIAL_BALANCES table has 36,521,125 records...LARGE.
4. We compared the ap_liability_balance records between 11i and R12. We have 29,171,382 in 11i and 37,769,034 in R12. But this is expected as we purge regularly in 11i production and I don't think this difference (about 30%) in the size of the tables should cause such a large difference in the size of the report files (nearly 2000%!!!).
5. Why are we getting Authentication failed errors? Just for these reports?
Of course we opened an SR, but you know how SRs go :-) and this is a time critical project with our deadlines nearing.
Any help or pointers from the experts here is greatly appreciated.
Thanks
Edited by: user11992646 on Jan 27, 2012 2:12 AMHi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time! -
firefox problems after installing version 4.0
Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time! -
after long time i open my iapd,but i canot open,ipad is desactivate,now i can open
I am trying to help you but I want to be sure I understand what is going on. I think that you can't "open" the iPad because you have to enter the PIN for your sim card according to this taken from the web site that I referred you to. If you cannot remember your PIN you will have to contact your carrier for a replacement SIM card.
COPIED FROM THE WEB SITE....
Summary
You can lock your SIM card so that it can’t be used without a Personal Identification Number (PIN). You must enter the PIN each time you turn iPhone or iPad Wi-Fi + 3G off and turn it back on again.
Products Affected
iPhone, iPad, iPhone Activation in iTunes
Note: This information applies only to devices that use a SIM card.
You can enable, disable, or change your SIM PIN in the following locations:
iPhone: Settings > Phone > SIM PIN
iPad Wi-Fi + 3G: Settings > Cellular Data > SIM PIN
Note: Some carriers provide SIM cards with a default SIM PIN already enabled. Contact your carrier to find out what your default SIM PIN code is.
Personal Unlocking Key (PUK)
If you enter the PIN incorrectly three times, you may need to enter a Personal Unlocking Key (PUK) to enable your SIM card again. Refer to the SIM card documentation or contact your carrier.
Note: Entering an incorrect PUK code too many times will result in the SIM becoming permanently locked. If this occurs, you will need to contact your carrier for a replacement SIM card. -
Discoverer report taking too long time to open.
HI,
Discovere reports are taking too long time to open. Please help to resolve this.
Regards,
BhatiaWhat is the Dicoverer and the Application release?
Please refer to the following links (For both Discoverer 4i and 10g). Please note that some Discoverer 4i notes also apply to Discoverer 10g.
Note: 362851.1 - Guidelines to setup the JVM in Apps Ebusiness Suite 11i and R12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=362851.1
Note: 68100.1 - Discoverer Performance When Running On Oracle Applications
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=68100.1
Note: 465234.1 - Recommended Client Java Plug-in (JVM/JRE) For Discoverer Plus 10g (10.1.2)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=465234.1
Note: 329674.1 - Slow Performance When Opening Plus Workbooks from Oracle 11.5.10 Applications Home Page
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=329674.1
Note: 190326.1 - Ideas for Improving Discoverer 4i Performance in an Applications 11i Environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=190326.1
Note: 331435.1 - Slow Perfomance Using Disco 4.1 Admin/Desktop in Oracle Applications Mode EUL
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=331435.1
Note: 217669.1 - Refreshing Folders and opening workbooks is slow in Apps 11i environment
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=217669.1 -
DWCS3 takes a long time to open!
HI,
As you read on the title, DW CS3 for Mac Leopard is taking a
long time to open. When you click on the application to open the
program, you get the typical DW green screen, the version # (9.0
Build 3481) but below that, all that stuff that read as it opens up
is not there. Looks like is trying to locate a file or folder and
after a few minutes the application finally opens. What's that?
Yesterday it was working fine. No idea what could it be. Any ways
if any of you kindly give me any suggestions of how to fix it, it
would be great.
Thank you so much for your time.
GeorgeKilombo-nyc wrote:
> HI,
>
> As you read on the title, DW CS3 for Mac Leopard is
taking a long time to
> open. When you click on the application to open the
program, you get the
> typical DW green screen, the version # (9.0 Build 3481)
but below that, all
> that stuff that read as it opens up is not there. Looks
like is trying to
> locate a file or folder and after a few minutes the
application finally opens.
> What's that? Yesterday it was working fine. No idea what
could it be. Any
> ways if any of you kindly give me any suggestions of how
to fix it, it would be
> great.
>
> Thank you so much for your time.
Hi George,
There is a post below about CS4 taking ages too, others with
CS3 are
suffering. I would hazard a guess its having problems taking
to Adobe.
Dooza
Posting Guidelines
http://www.adobe.com/support/forums/guidelines.html
How To Ask Smart Questions
http://www.catb.org/esr/faqs/smart-questions.html -
Excel files with fields linked to other excel files take a long time to open from SharePoint library
Trying to track a problem for a user.
Most of the documents opened from our SharePoint libraries appear to open in a timely fashion.
But...one user has noticed an issue, and I just noticed something with her files that are a little less common than other stuff we've seen.
she has a lot of pricelist excel files. there are some master price list files, and then other files that link to fields from within the master files.
the files that contain links to other files appear to be the ones that open very slowly.
the files are being opened via excel itself, not the owa viewer or editor.
is there a trick to setting up either the library, the site, site collection or web app... or some client-side setting that affects how quickly/efficiently excel will open files that link to other excel files shared within sharepoint?Hi carphuntin_god,
According to your description, my understanding is that when you click a hyperlink which redirect to other files , the file are opened very slowly via excel client.
How about you download the same file and open it using excel client? If it is opened quite fast, the issue should be caused by some third-party add-ins in the office program or antivirus soft.
Here is a similar thread you can have a look:
http://social.technet.microsoft.com/Forums/en-US/ff0c5306-5300-4010-a760-c4cca320b6fc/excell-file-taking-long-time-to-open-and-edit?forum=officesetupdeploylegacy
http://social.technet.microsoft.com/Forums/en-US/5c746958-418a-44f6-a777-9f8bddf6dbb6/sharepoint-file-open-takes-long-time?forum=sharepointdevelopmentlegacy
If you want to open the files using excel service after click the link in the excel file, you can create the hyperlink in the following way:
General Syntax:
http://<server_name>/<site_name>/_layouts/ xlviewer.aspx?id=<workbook path>&range=<location>
For example:
http://CorpServer/DeptA89/_layouts/ xlviewer.aspx?id=http://Mfct/Stats/Shared%20Documents/Parts.xlsx&range=Widgets!A1:F25
For more information:
http://office.microsoft.com/en-001/sharepoint-server-help/using-hyperlinks-in-excel-services-HA010173679.aspx
If you want to open the files using Office Web Apps after click the link in the excel file, you can create the hyperlink in the following way:
http://<server name> / <site name> / <library name>/<your file name> ?web=1
For example:
http://sp/Shared%20Documents/exceltest.xlsx?Web=1
Best Regards,
Eric
Eric Tao
TechNet Community Support -
My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored -
ITunes takes a long time to open, or doesn't open at all.
I recently had problems with iTunes where it just wouldn't open. I did a factory reset on my computer, however it takes a long time to open and works really slow. When I try to sync, it takes around in hour.
.
-
Webi report takes long time to open
Hi All.
We have created few reports in webi and we have used variables in these reports.
But while opening that reports into BI Launch pad browser, it is taking long time to open. e.g. 5 to 7 min or more.
Please help to resolve this issue.Hi Anand R,
A couple of questions from my side:
1) Does the webi report contains any chart
2) Are webi reports which are slow only on a single .UNX
3) How about the network.
4) Are you using IE
5) Are you in 3.x or 4.x
Could you try any of the below:
1) Increase Tomcat memory pool to 4096Mb
2) Stop and restart Tomcat once.
3) Try with other browser
4) Use something like Fiddler to understand the network speed
5) Delete cookies in the browser
Try the other options told by our SCN colleagues aswell..
BR
Prabhith -
Long time to open tab "change history" of business partner in Web_ui.
Dear experts!
Long time to open tab "change history" of business partner in Web_ui.
4 records were opened for 10-20 seconds
http://imglink.ru/show-image.php?id=22083a6a576f78c66c86863bf6b0573b
1. In what may be the reason?
If the records are many, the discovery may be more than a minute.
2. Is There a report for the purification of the " Сhange history" over a period?Hello Dilip,
One more alternative would be to increase the time out parameter in ABAP environment.
The steps to change this parameter:
1) txn: RZ11 -> enter the variable name rdisp/max_wprun_time
2) Display -> Change value -> Then input the value you would like (ideally 3600)
PS:
1) Don't set this value too big, otherwise general performance will be
influenced, since lots of dialogue process will be occupied for a long
time
2) This parameter can be changed dynamically
Once the parameter is set please test again. You can try incremental
values and test which one does not give timeout error.
please refer to the note 25528 for more details about RZ11.
Hope this helps!
Thanks and Best Regards,
Shanthala Kudva.
Maybe you are looking for
-
How does JAVA dialog instance gets synced from CI
Hello Guru's, I have recently added two dialog instance to my Portal production. I want to know what changes I have to make manually to all the dialog instances? I had to manually change the JAVA parameters for all the dialog instances servers and ad
-
Portege R600 - Difference between cooling options
I have a Portege R600 with Windows 7 installed, but I guess my query is generic to all Porteges regardless of the version of Windows. Could someone please explain to me what the different "cooling options" in the power settings actually mean? I could
-
Can We use FDM as ETL tool between SQL and Oracle
I want to use FDM as ETL tool between SQL and Oracle. Can it be possible. I didn,t found any target adapter for oracle database.My source system is SQL and Target system is Oracle database. Rahul Edited by: user12190125 on Nov 9, 2009 4:23 AM
-
Scrollable bar in webdynpro java tables
Hi All, Is it possible to have a vertical scroll bar in tables? i have used the scrollable container UI element,and increased the table row visiblity as 20 still i'm not getting the scroll bar. Can anybody help on this? Regards, V Karthi
-
Customize button grayed out?
I tried to customize the toolbar button just now and the button in the context menu from right clicking the toolbar.. i clicked it and the customize didn't open but i tried to open it again and it grayed out.. this is the 2nd time this has happened..