Device category error

while creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

Hi Ahemad,
It seems you have not created the Material in MM with the same name of the Device Category you are trying to create. Create material using T.Code MM01.
Hope it helps.
Thanks,
Rakesh

Similar Messages

While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

Neha,
you can do in two ways.
1. Enter a valid Division which you configured in the system.
2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
Linganna Katigiri

Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1

I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1. Can someone help?

This is NOT resolved. The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing. This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well.

I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes. There is no 'Devices" category on the bar at the left

I updated to a newer version of iTunes and now my ipod touch does not show up as a device in iTunes. There is no 'Devices" category on the bar at the left

Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Error message on reading device saying error dialog user not activated

error message on reading device saying error dialog user not activated. unable to open book to read

I had Adobe upgraded to from 1.2. to 4.1 on my Glow Light Nock at Barnes and Noble yesterday. I use a MacBook Pro 2011 upgraded to 10.10.1. I have never had a problem download a book from the library to my nook in the past. By the time I get this issue resolved, my 2 week book will be overdue and my book club discussion 1/21. I have been to the genius bar at Apple store--not their problem. Two trips to B&N and
the tech guy said he could fix the problem on a PC but not a Mac. It is not a Mac or Nook world.

HT1339 hi i reset the settings on my ipod and when i connected it to my laptop its not recognized. It shows unknown device code error 43, and its not recognized when i connect to itunes.

Hi I went into settings on my ipod and reset it, when i connected it to my laptop afterwards itsays USB unrecognized unknown device, code error 43. Its also unrecognized in itunes. All my music is still on the ipod, How can I sync it itunes??

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Also try change the DNS to Google's servers. See:
Public DNS — Google Developers

Device instance error, vista can't see media card

hello,
I have a pearl 8110, with desktop 6 and vista. After upgrading to version 6 I get this device instance error and specifically can't load any media onto the memory card via usb.
USB\VID_0FCA&PID_8001\5&3100FCC1&0&5
been through the forums for months tracking this down on how to clear it. Downloaded the calfix.exe program as that was the only clue that related to the 8001 error, ran it and nothing, did not work. Fix was for versions 4.7 to ver 5.
I can sync, load and upgrade BB software without any problems, tried two different memory card manufacturers, formatted card, pulled battery so many time don't ask me to do it again. mass storage mode is on, but software keeps telling me to turn it on even though its already on, been on since day one! Everything works via bluetooth, pictures, video, mp3, but windows just can't see the memory card.
Also went through the computer management to loocate the drive, but no luck?
Does anyone have any ideas on how to fix?

Greetings, and welcome to the BlackBerry.com Support Forums.
Are you attempting the format or looking at the Media Card from the BB WHILE you are plugged to the USB?
Unplug and try it all again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Windows 8.1 Installed now I received a Fatal Device Hardware Error

Windows 8.1 kept popping up to install update. I would refuse it. Then recently it updated itself. After that, i noticed it took a little longer for my laptop to boot. It would show a blue screen for a little bit then it would boot. Yesterday, I received an error (can't remember what it said) needed to restart because of an error. I ran the Hard Disk Test and Quick and then the extensive test. it stops at one sec remaining and noting happens. I did get a fatal device hardware error. Can the update to Windows 8.1 cause this to happen?
This question was solved.
View Solution.

Hi,
That's what it looks like to me too.
You may be able to find a replacement drive for your notebook from the HP Parts Store.
I worked on behalf of HP.

Device removal error..... The card reader ejects itself

Hello, I'm new to macs and purchased a Mac Mini a week ago. Things were going well until I needed to move pictures from a digital camera to my mac.
I purchased a GE 19 in 1 card reader which is built for mac os x. I hook it up to a usb port and try and look at some pictures. After a few seconds, the card reader ejects itself and I get the "device removal" error. The error will then continue to appear over and over again. When I try to eject the reader using by clicking eject, the reader ejects and only reappears a minute later and ejects itself again. I've tried using another usb port and I know for sure that its not the cable.
If I can't get any prompt answer here, I'm going to call the Genius bar tomorrow morning and ask about the problem. <Edited by Moderator>

More often than not, when a card reader or other similar device disconnects from the USB bus because it is drawing too much power. In a card reader, that would not unusually be triggered not by the card reader itself, but by the insertion of a card causing it to read the content and mount the volume on the Mac's desktop. Part of the problem is that while everything is invariably quoted as USB compatible, many such devices don't entirely comply with the USB standard, resulting in conflicts or load demands which may be borderline, or worse.
You may be able to get more reliable performance from your reader by disconnecting other USB devices when you are trying to use it, or by using it with a powered USB hub. Occasionally, borderline problems can be temporarily resolved by connecting the device to a different port, if necessary switching devices around. Alternatively, it may be that in an attempt to produce a device with the greatest flexibility in terms of media compatibility, they have compromised on components.
I would generally recommend a card reader designed for the specific card type you need. These are typically far more reliable. If you need to use different types of card media, then be prepared to spent on a well established brand with a reputation in this sector of the market, such as SanDisk.

Device removal error?

I picked up a new 500 gig Hitachi hard drive to put into a vantex hd enclosure. Now every time I try and use it, i get a device removal error and the hard drive icon on the desktop disappears. I can't use Time machine or verify my hard drive in disk utilities because it always seems to eject itself. I tried a couple different USB cables and tried rebooting my computer. Both products are new, I'm wondering if it is a hardware problem and if it is, which one, the enclosure or the hard drive?
Any suggestions?

Thanks for the suggestion but..
Tried that this morning and it still doesn't work:( I turn it on, start up Time Machine and it starts backing up the files and then some times it will start backing up 20-30 gigs and then give me the device removal error, or sometimes it only backs up 10-20 mb before giving me that error, but even after it ejects itself the hard drive is still on, but i have to turn it off and then back on again for the disk to remount. I'm leaning towards a hardware problem, just not sure if its hard drive or enclosure. I bought both online and having to send them back is always a pain because they usually just send them back saying they work and tack on another fee. Im hoping to resolve this some other way, but running out of ideas.
Any other thoughts?

How to clear device/bundle errors

Hi all: I manage about 100 PCs with ZCM 11.2.4. I need a way to clear all device/bundle error messages, both for bundles and policies, so that the icons on ZCC all show clear. I know I can delete all error messages, but how do I clear all bundle error messages? I want to get rid of the red error icon so I can easily see which computers are getting these errors since they were cleared. Right now the error icon does not go away.
Thanks for the help, Chris.

cmosentine <cmosentine@N0_5pam_vrapc.com> wrote:
> DQpUaGF0IGNsZWFycyBtZXNzYWdlcyBsaWtlIHlvdSBzYXkgYn V0IGl0IGRvZXMgbm90IGNsZWFy
> IGJvdGggaWNvbnMuICBXaGF0IEkgbWVhbiBpcyBmb3IgZWFjaC Bjb21wdXRlciB0aGVyZSBhcmUg
> dHdvIGljb25zLCB0aGUgY2hlY2tsaXN0IGFuZCB0aGUgY2lyY2 xlLiAgQ2xlYXIgdGhlIG1lc3Nh
> Z2VzIHR1cm5zIHRoZSBjaXJjbGUgYmFjayB0byBncmVlbiBidX QgdGhlIGNoZWNrbGlzdCBpY29u
> IHdpbGwgc3RpbGwgaGF2ZSB0aGUgcmVkIHJpbmcvc2xhc2ggKH RoZSBkbyBub3QgZ28gc2lnbikg
> b24gaXQuICBJdCBpcyB0aGlzIGljb24gSSBuZWVkIGNsZWFyZW QuDQoNCg0KIA0KDQo+Pj4gbm9w
> MTk4Mzxub3AxOTgzQG5vLW14LmZvcnVtcy5ub3ZlbGwuY29tPi A4LzI4LzIwMTQgODoxNiBBTSA+
> Pj4NCg0KDQoNCkdvIHRvICJDb25maWd1cmF0aW9uIiAtPiAiU3 lzdGVtIGluZm9ybWF0aW9uIi4u
> LiBoZXJlIHlvdSBjYW4gY2hvb3NlDQoiTWVzc2FnZSBDbGVhbn VwIiBvbiB0aGUgbGVmdCBhbmQg
> c2VsZWN0IGEgZnJvbSBhbiB0byBkYXRlLiBTZWxlY3QNCiJQZX JtYW5lbnRlbHkgRGVsZXRlIi4N
> ClRoaXMgc2hvdWxkIGdpdmUgeW91IGEgImZyb20gc2NyYXRjaC IgdmlldyBpbiB0aGUgWkNDIDop
> DQoNCg0KLS0gDQotLQ0KTmllbHMNCkkgaGF2ZSBhbHdheXMgbG lrZWQuLi4gQ293YWJ1bmdhIQ0K
> DQpJZiB5b3UgZmluZCB0aGlzIHBvc3QgaGVscGZ1bCwgcGxlYX NlIHNob3cgeW91ciBhcHByZWNp
> YXRpb24gYnkNCmNsaWNraW5nDQpvbiB0aGUgc3RhciBiZWxvdy 4NCkEgbWVtYmVyIG11c3QgYmUg
> bG9nZ2VkIGluIGJlZm9yZSBzL2hlIGNhbiBhc3NpZ24gcmVwdX RhdGlvbiBwb2ludHMuDQotLS0t
> LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS 0tLS0tLS0tLS0tLS0tLS0tLS0t
> LS0tLS0tLS0tLS0NCm5vcDE5ODMncyBQcm9maWxlOiBodHRwcz ovL2ZvcnVtcy5ub3ZlbGwuY29t
> L21lbWJlci5waHA/dXNlcmlkPTU3MjYyDQpWaWV3IHRoaXMgdGhyZWFkOiBodHRwcz ovL2ZvcnVt
> cy5ub3ZlbGwuY29tL3Nob3d0aHJlYWQucGhwP3Q9NDc5MDE3
> --____JOLVDYQQHCXKLYAOQDJX____ Content-Type: multipart/related;
> boundary="____YIFONLXFRFYYQLYMNALF____"
>
> --____YIFONLXFRFYYQLYMNALF____
> Content-Type: text/html; charset=utf-8
> Content-Transfer-Encoding: base64
> Content-Disposition: inline; modification-date="Thu, 28 Aug 2014 08:45:33 -0400"
>
> PGh0bWw+PGhlYWQ+CjxtZXRhIGh0dHAtZXF1aXY9IlgtVUEtQ2 9tcGF0aWJsZSIgY29udGVudD0i
> SUU9MTEiPgo8bWV0YSBuYW1lPSJHZW5lcmF0b3IiIGNvbnRlbn Q9Ik5vdmVsbCBHcm91cHdpc2Ug
> Q2xpZW50IChWZXJzaW9uIDE0LjAuMCAgQnVpbGQ6IDExNTI0My kiPgo8bWV0YSBodHRwLWVxdWl2
> PSJDb250ZW50LVR5cGUiIGNvbnRlbnQ9InRleHQvaHRtbDsgY2 hhcnNldD11dGYtOCI+PHN0eWxl
> Pjwvc3R5bGU+PC9oZWFkPgo8Ym9keSBzdHlsZT0iZm9udDogMT BwdC9ub3JtYWwgU2Vnb2UgVUk7
> IG1hcmdpbjogMTZweCAxNnB4IDRweDsgZm9udC1zaXplLWFkan VzdDogbm9uZTsgZm9udC1zdHJl
> dGNoOiBub3JtYWw7Ij48ZGl2IGNsYXNzPSJHcm91cFdpc2VNZX NzYWdlQm9keSIgaWQ9Ikdyb3Vw
> V2lzZVNlY3Rpb25fMTQwOTIyOTc4MTAwMF9HUkFETUlOQHZyYX BjLmNvbV9DODc4REU4MDE2NzEw
> MDAwODc5MTYwMDA2QzAwNjIwMF8iPjxkaXY+VGhhdCBjbGVhcn MgbWVzc2FnZXMgbGlrZSB5b3Ug
> c2F5IGJ1dCBpdCBkb2VzIG5vdCBjbGVhciBib3RoIGljb25zLi ZuYnNwOyBXaGF0IEkgbWVhbiBp
> cyBmb3IgZWFjaCBjb21wdXRlciB0aGVyZSBhcmUgdHdvIGljb2 5zLCB0aGUgY2hlY2tsaXN0IGFu
> ZCB0aGUgY2lyY2xlLiZuYnNwOyBDbGVhciB0aGUgbWVzc2FnZX MgdHVybnMgdGhlIGNpcmNsZSBi
> YWNrIHRvIGdyZWVuIGJ1dCB0aGUgY2hlY2tsaXN0IGljb24gd2 lsbCBzdGlsbCBoYXZlIHRoZSBy
> ZWQgcmluZy9zbGFzaCAodGhlIGRvIG5vdCBnbyBzaWduKSBvbi BpdC4mbmJzcDsgSXQgaXMgdGhp
> cyBpY29uIEkgbmVlZCBjbGVhcmVkLjxicj48L2Rpdj48c3Bhbi BzdHlsZT0ibWFyZ2luLWJvdHRv
> bTogNXB4OyBkaXNwbGF5OiBibG9jazsiPiZuYnNwOzwvc3Bhbj 48ZGl2IGNsYXNzPSJHcm91cFdp
> c2VNZXNzYWdlQm9keSIgaWQ9Ikdyb3VwV2lzZVNlY3Rpb25fMT QwOTIyODE2MjAwMF9ub3AxOTgz
> QG5vLW14LmZvcnVtcy5ub3ZlbGwuY29tIj48c3BhbiBjbGFzcz 0iR3JvdXB3aXNlUmVwbHlIZWFk
> ZXIiPiZndDsmZ3Q7Jmd0OyBub3AxOTgzJmx0O25vcDE5ODNAbm 8tbXguZm9ydW1zLm5vdmVsbC5j
> b20mZ3Q7IDgvMjgvMjAxNCA4OjE2IEFNICZndDsmZ3Q7Jmd0Oz xicj48L3NwYW4+PGRpdj48ZGl2
> Pjxicj5HbyB0byAiQ29uZmlndXJhdGlvbiIgLSZndDsgIlN5c3 RlbSBpbmZvcm1hdGlvbiIuLi4g
> aGVyZSB5b3UgY2FuIGNob29zZTxicj4iTWVzc2FnZSBDbGVhbn VwIiBvbiB0aGUgbGVmdCBhbmQg
> c2VsZWN0IGEgZnJvbSBhbiB0byBkYXRlLiBTZWxlY3Q8YnI+Il Blcm1hbmVudGVseSBEZWxldGUi
> Ljxicj5UaGlzIHNob3VsZCBnaXZlIHlvdSBhICJmcm9tIHNjcm F0Y2giIHZpZXcgaW4gdGhlIFpD
> QyA6KTxicj48YnI+PGJyPi0tIDxicj4tLTxicj5OaWVsczxicj 5JIGhhdmUgYWx3YXlzIGxpa2Vk
> Li4uIENvd2FidW5nYSE8YnI+PGJyPklmIHlvdSBmaW5kIHRoaX MgcG9zdCBoZWxwZnVsLCBwbGVh
> c2Ugc2hvdyB5b3VyIGFwcHJlY2lhdGlvbiBieTxicj5jbGlja2 luZzxicj5vbiB0aGUgc3RhciBi
> ZWxvdy48YnI+QSBtZW1iZXIgbXVzdCBiZSBsb2dnZWQgaW4gYm Vmb3JlIHMvaGUgY2FuIGFzc2ln
> biByZXB1dGF0aW9uIHBvaW50cy48YnI+LS0tLS0tLS0tLS0tLS 0tLS0tLS0tLS0tLS0tLS0tLS0t
> LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS 0tPGJyPm5vcDE5ODMncyBQcm9m
> aWxlOiA8YSBocmVmPSJodHRwczovL2ZvcnVtcy5ub3ZlbGwuY2 9tL21lbWJlci5waHA/dXNlcmlk
> PTU3MjYyIj5odHRwczovL2ZvcnVtcy5ub3ZlbGwuY29tL21lbW Jlci5waHA/dXNlcmlkPTU3MjYy
> PC9hPjxicj5WaWV3IHRoaXMgdGhyZWFkOiA8YSBocmVmPSJodH RwczovL2ZvcnVtcy5ub3ZlbGwu
> Y29tL3Nob3d0aHJlYWQucGhwP3Q9NDc5MDE3Ij5odHRwczovL2 ZvcnVtcy5ub3ZlbGwuY29tL3No
> b3d0aHJlYWQucGhwP3Q9NDc5MDE3PC9hPjxicj48YnI+PGJyPj xicj48L2Rpdj48L2Rpdj48L2Rp
> dj48L2Rpdj48L2JvZHk+PC9odG1sPg==
> --____YIFONLXFRFYYQLYMNALF____--
>
> --____JOLVDYQQHCXKLYAOQDJX____--
Sorry, but I'm not sure this can be easily cleared... If possible? I'll ask
Novell.
Nops

Change of Device Category of a Device

Hi
Can anyone help me about the convenient process so that device category of device can be changed.
Actually, my requirement is as follows:
1. User creates a device E1 (External number range) under device category D1. Equipment and serial number are synchronous so equipment E1 is created automatically.
2. Afterwards user found that device E1 is wrongly created under device category D1, it should be created under device category D2.
So, what is the convenient process to do that. Shall I delete the equipment E1 through standard process then again create E! under device category D2 or any other way.
I am not also sure how to delete the equipment E1 so that I can use the same number again.
If there is any other convenient way, please share, else E1 number will be lost for ever if user mistakes at the time of creation.
Regards
Satadal

hi,
as you would know that each combination of material and serial number is unigue in the system.
so if you create a device 'e1' in category 'd1' then you can also again create 'e1' in category 'd2'.
to your second question about deleting the device i guess you can try it from the database.i.e deleting the entry but this may lead to inconsistent data.
other way can be to either chnage the device category or the serial number.
For this go to trans. IQ02(change mode) ,goto tab 'edit>special serial number functions>change material number/change serial number'.
using this you can change device 'e1' from category 'd1' to category 'd2'.
note: after this 'e1' from category 'd1' is deleted..
i tried this before doing the installation ,so I have no idea whether it would work after installation of the device ,just try it out
hope this helps.
cheers,
Rakesh...

Outbound interface - device modification/reversal & device category change.

Hi Friends,
I have a requirement to trigger an outbound interface in the event of device modification/reversal and device category change.I couldn't find any event which gets triggered upon device modification and reversal.There are 2 user exits - call customer '001' and call customer '002' provided by SAP.However,both these exits do not get triggered on device modification.For reversal,there is no exit provided by SAP.I have actually written a code within if....endif..statement in the Zinclude and had put a breakpoint in the Z include of both the device modification exits.None seem to work.
Similarly there are no events/exits/BAdI's for device category change.I need to trigger the same outbound interface upon device category change.
This brings me to the conclusion that there is no standard way to do an activity upon completion of device modification/reversal and device category change.There are no BAdI's as well.Change pointer activation could be one of the solution.Could you please suggest an alternative solution.
Many thanks,
Raj

Hi Raj,
Please check if the default BAdI interface IF_EX_ISU_IDE_DATEXCONNECT is triggered during device modifications / removal.
Use the method IF_EX_ISU_IDE_DATEXCONNECT~DATEXCONNECT_BILLINGINST_CHNG to see if you can make use of it.
Thanks,
Imran

Xserve Raid - Devicer Removal Error ?!

Hi !
Can anybody help me ?
Whenever I copy some files from my Macintosh HD on my G5
to Xserve Raid 30 seconds after start copy process stops and I
get an Device Removal error.
I have traid everything and I can't get it right.
BTW
is my setup ok ?
Apple Fibre Channel Card
Port speed: 2 Gb/s
Port topology: Arbitrated loop
Xserve Raid
Port speed: 2 Gb/s
Port topology: Arbitrated loop
Read prefetch: 128 stripes - 8 MB/disk
Controller cache: on
Drive cache: on
Host flushing: off
Steady Streaming: off
Raid slices:
2x250 GB left controller
2x250 gb right controller
Disc Utility software raid:
Striped raid 0
left + right
Raid block size (default: 32 K): 256K
Please help!
Thx!
Crowebster

Hey Kel,
I've only seen a error -36 on a raid volume twice.. both times were days before a controller failed. I'd try swapping controllers and see if the problem follows the controller...

Device category error

Similar Messages

Maybe you are looking for