Device Connected But Not Showing Up In Network Map

Network Magic Version: 5.5.9195.0
Connection: Cable
Modem: Linksys WRT54GS2
Firmware: 1.0.02 build 007, Jan 21, 2010
Problem Device: Blu-ray, wireless
Operating System: Windows 7 Home Premium, Service Pack 1
Anti-virus/Firewall/Spyware: Microsoft Security Essentials/Windows Defender/Spybot
Website Issues: I can visit any site
My blu-ray is connected to my network. I know this because I have no issue streaming Netflix. However, it is not showing up on my network map.
How do I fix this?

Oh! And here's another weird thing. My nephew was visiting yesterday, helping me move furniture and he asked could he get on my wifi. I opened the network lock and put the password in his phone myself and it never gave me a notification that he had connected. Later, my dad came over and when his phone connected to my wifi, it let me know that he had connected. Wonder what's different about these 3 devices (blu-ray, 2 iphones). None were listed in the network map before I allowed them to connect yesterday.

Similar Messages

Photosmart C310: WiFi connected, but not showing up in network via Mac or iPhone

I am using a HP Photosmart Premium C310. It is connected to WiFi, but does not show up on Mac or iPhone via Wifi:
- iPhone Airprint does not find the printer (select printer)
- Mac "add printer" does not find the printer
- newest HP Setup Application (HP_Lion_Ink_SW_v12.13.14, Dec 2011) finds printer only as long as connected via USB, reconfigures WiFi settings, but can not re-find the printer when USB cable is taken off
- I can send "ping" to the printer using the IP address shown in touchscreen info panel so it is online in WiFi
- I tried to reset factory settings for settings + network settings, no change...
Is that a defect or any idea how to fix the problem?
Best regards, any help appreciated...

Hi,
Per your description, i believe the issue may being caused by your router compatibility with Apple Bonjour, which require multicasting support in order to operate propertly.
In order to verify, try to temporary create an ad hoc connection between your iPhone and the printer and check for any change:
Step One : Restore the network defaults on the HP All-in-One
On the product control panel, touch the Setup icon ( ). The Setup menu displays.
Touch Wireless .
Touch and then slide your finger down on the display to select Restore Network Defaults .
When asked 'Are you sure? ' touch Yes .
After the network defaults restore, touch Wireless Connection , and then touch On .
The message 'Wireless Radio is now on ' should briefly display on the control panel and the Wireless light ( ) on the HP product should start to blink. The HP product is now openly broadcasting the ad hoc wireless network.
Step Two: Create an ad hoc wireless network connection between the HP All-in-One and the Apple device
On your Apple device, tap the Settings icon ( ).
Tap Wi-Fi .
Under Choose a network , find the name that starts with HPC310 , and then tap it. A checkmark should display to the left of the name.
Wait three minutes to make sure that the ad hoc connection is established and try printing from the iPhone by taping the Action icon ( ) and then tapping Print.
If you were able to print through the direct printer, it means the router more likely cause the problems..
Please clarify your router brand, model and the router firmware version if available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

My 5th gen nano will not sync win 7 .says connected but not show in itunes. driver is updated ,working properly ....help

my 5th gen nano ,has updated driver ,working properly. ipod connected but not showing in itunes ?

By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

Bluetooth paired and connected, but not showing up in device list

I have a iphone 4s and a plantronics discovery 975. It was working fine, I don't recall doing any updates... But now, it's showing paired and connected, but when I make a call, it's not connecting and doesn't sho up in the the device options - only shows speaker. I already did the 'forget device' and re-paired it and it still won't work. If I press the call button twice on the bluetooth, it'll call the last number dialed, so I know there's some connection... I'm lost... Any help would be appreciated!

Oh! And here's another weird thing. My nephew was visiting yesterday, helping me move furniture and he asked could he get on my wifi. I opened the network lock and put the password in his phone myself and it never gave me a notification that he had connected. Later, my dad came over and when his phone connected to my wifi, it let me know that he had connected. Wonder what's different about these 3 devices (blu-ray, 2 iphones). None were listed in the network map before I allowed them to connect yesterday.

Ipod Classic connected but not showing in Itunes under Devices

I know this is similar to a few of the other issues that are described, if anyone can offer a link to another thread where the resolution is posted, that would be great, thanks!
I plug my ipod into my computer, I get a windows message saying some files may be damaged, Itunes actually automatically loads up but my Ipod is not shown in the Devices list in Itunes
I have been wracking my brain over this!
I have uninstalled/reinstalled Itunes 3 times, have reset my ipod manually (& now have no music on it at all!) have put the Ipod into disk mode, have taken it out of disk mode. On my laptop I've gone into Services - stopped/then started the Apple Device. I've removed the Apple Mobile Device USB Driver & reinstalled all to no avail! It still wont show up in Itunes!
Just to clarify;
- My laptop CAN see my ipod in its list of devices under My computer
- When I connect the Ipod, I get a window message from Windows saying some files may be damaged & it suggests running a scan.
- Itunes will start up when i plug in my IPOD, however
- My IPOD will not show up in the list of devices in Itunes
Another thing, I have 120GB ipod when I did a restore it deleted all the music but it is telling me that i only have 111GB memory available?!?!
After reading through the forums I did see someone state somewhere that you can restore your Ipod from Windows but I can't find the link that gives a list of instructions on how to do this.
Any help is greatly appreciated!
thanks

Hello there,
And welcome to Apple Discussions!
Regarding the error message about needing to scan and fix your iPod, see this article and follow the provided instructions to prevent the error message from reappearing. It may also resolve your "iPod missing in iTunes" issue as well.
http://www.futureofrealestatetechnology.com/general-real-estate-technology/resol ve-vista-scan-and-fix-error-when-plugging-in-ipod-or-other-devices/
Yes you can use the tools provided by Windows to reformat your iPod. Just make sure to format it as FAT32 and that the "Quick Format" option is not selected. For complete instructions, see this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
Any luck there?
B-rock

JBL Charge not working on a Windows7 PavilionG6. Connected but not showing as an audio device.

I have a:
HP Pavilion G6-1242sa
Product: A5H10EA#ABU
Serial: {Personal Information Removed}
I am using Windows 7 64-Bit.
I am trying to pair my JBL Charge Bluetooth speaker to my HP Pavilion. I have installed the latest drivers for the speaker from Ralink. I am able to detect and connect the JBL Charge through my Bluetooth dongle . The device is added and installed as a Bluetooth device when I connect my computer to my Bluetooth speaker. All seems good.
But I cannot see the Bluetooth speaker in my Playback Devices when I right click over the speaker icon. When I right clik on the properties of the device in my Bluetooth device I am given the tabs of:
General, Hardware, Services, Bluetooth.
I am not given the option of Audio!
I have installed the HP Wireless Assistant and can only see my Wireless LAN Adapter. Bluetooth is not showing at all!!
I am able to turn the Bluetooth on and off in the notifications area via the Bluetooth icon though.
Please could you give me some advice on how to resolve my issue as I am not sure if its a sound problem or a bluetooth connection problem.
Kind regards
Chris

Hi Mario,
I have been through the help documents regarding Blutooth but have not found my problem unfortunately.
I have downloaded the drivers for the device from Ralink. I tried to download the drivers from Broadcom but whenever I ran the installation I got the error message saying that it did not detect any Bluetooth devices, even though the Bluetooth speaker was on discovery mode.
Strangely, my HP Pavilion G6 can detect the Bluetooth speaker in discovery mode and is able to pair to it. But when I open the HP Wireless Assistant, Bluetooth is not shown. Nor is the device shown as a playback device in sound settings. Nor is there a way you can right click and open a connection to the Bluetooth speaker in Devices and Printers > Bluetooth Devices > JBL Charge.
I have tried downloading all sorts of driver software from HP but nothing seems to work. I cannot think of anything else to update on my computer to maybe shift something into place.
Below is a screen grab of all the sp's I have used to resolve this problem. Nothing is working!!!
Is there anything else I can check or configure or try??
Kind regards,
Chris

Playbook WIFI connected but not able to access network

Hi,
Have a 32GB Playbook and from new has had wifi issues. Running 2.1.0.1314.
Symptoms are that works fine on a variety of open and secure networks until a point where wifi is showing as connected, it tells me I have an internet connection but no apps or browsers able to access the internet, just unable to resolve host name.
Having trawled the internet I have tried the following fixes -
All methods of rebooting and changing date/time etc.
Deleting the saved network - in fact all networks
Changing various settings etc.
The only fix that works is a complete security wipe at which point it works again until the next time, which has now occurred 5 times.
The onset of each episode of being frozen off of networks seems to be login on open connections. I have it set to ask for connection to a saved network and when accepted the login page opens. However on occasion the login "handshake" seems to get confused and I am left with the device supposedly loggedin but no network access.
No matter what I then do the same issue exists on all networks I try until I do a full wipe.
All settings are standard, websites allowed to access location etc.
Can't register the device for support, get the message that support not available.
Any help appreciated.

UPDATE
After deleting all saved networks and rebooting the PB it failed to connect again to the secure network I had last tried.
However, it did connect to an open wifi hotspot. I am wondering whether I need to ensure that the next network I try after experiencing the issue and doing the above is different to the one I was trying to connect to last.
Is there some kind of residual network memory hang up !
Will update again next time it occurs, which historically has been every 2 - 7 days.

My apple iphone 4s wont charge! its showing that the power is connected, but not showing that its charging! phone is turned off and now wont turn on

I phone 4s is not charging, its showing that the power is connected, but still not charging

Hi Sharky,
First, I would make sure you are charging using the wall adapter and cable that came with your phone. Plug into wall outlet.
If it was completely drained it can take about 20 minutes for it to fully get enough power back to even start up.
After about 20 minutes of charging in the wall outlet try turning it on like normal.
If it doesn't respond by just pushing the power button, try pushing and holding the power and home buttons together for about 15 seconds to see if it will startup.
John

Computer not showing up in Network Map

Hi,
Running NM 5.5.9195.0-Pure0/Platform 11.2.9195.1 through a DLINK DIR 655 Cable (Comcast) Modem Hardware Version A3 and Firmware 1.21. Connected wired to Dell Desktop Windows Vista 32bit. via Intel(R) 82566DC-2 Gigabit Network Connection. Home network consists of another Dell desktop (wired) and two identical Dell Laptops (Dell XPS M1530), Canon M6590 Network printer (wired) and a Hawking HWNREN1 300N range extender (wireless). All computers have Norton Internet Security 2010.
The map in network magic shows all computers and devices with the exception of one laptop when it is powered off. As I said above, the two Dell Laptops are identical. When both laptops are powered up, they are displayed. If both laptops are powered off, only one remains visible in the map (it shows a "dimmed" dotted connection line to the central modem in the map).
I can not figure out why the other laptop is not displayed in the map when it is powered off.
Any ideas?
Thanks in advance.

Oh! And here's another weird thing. My nephew was visiting yesterday, helping me move furniture and he asked could he get on my wifi. I opened the network lock and put the password in his phone myself and it never gave me a notification that he had connected. Later, my dad came over and when his phone connected to my wifi, it let me know that he had connected. Wonder what's different about these 3 devices (blu-ray, 2 iphones). None were listed in the network map before I allowed them to connect yesterday.

IPod is connected but not showing up on the Device option?

I had just used it the day before and uploaded some new songs to it and when I loaded my AC/DC album into my libray and then ejected it and plugged in my ipod nano it charges but the Device option doesn't come up to sync new songs ?
Any help would be much appreciated as I've looked but haven't seen any of the same problem as mine

Hi, Im sorry just to add on to this discussion but I couldnt figure out how to start a new discussion and I am going mad! I have a new ipod because my last one was stolen and I have plugged it in and my PC wont recognise it. I think that is because my old ipod is the only one my computer will accept. Can that be right? It said the hardware device had been detected and then it said that it was troubled and it simply did not work. Now it is plugged in and not at all recognised in my computer anywhere. Can any one help this clueless girl who simply wants to listen to music again?
Thank you.

Usb connected but not showing up in my finder?

so i went out and got a samsung mp3 player (before anyone goes off..i've had FOUR ipods..three ipod minis and a nano..all have crapped out on me..and i'm not spending $300 for a new one just cuz it will work with my mac..screw that i could barely afford this $130 mp3 player with $70 in giftcards) ..and it's plugged into my usb..and its charging from my macbook...and the mp3 player says its connected..but i can't access it from my finder window..cuz it doesn't say it's there....anyway i can force it to show up? i would rather avoid having to use my roommates laptop to get music on it, just cuz thats a bit of a hassle. the software obviously won't install cuz its for xp/vista...but i did have an rca at one point that used the same music program(media player), and i could just drag and drop my music on to it..

You need to go to Samsung's support site and see if they have any software/drivers for OSX. If they don't I think you are out of luck.

Cisco vpn 5.0.07.0440-k9 connected but not access remote network from Windows 8.1 pro

I am using Cisco vpn 5.0.07.0440-k9 and Cisco vpn 5.0.07.0290-k9 both version on our windows 8.1 pro laptop.
VPN successfully connected but not access remote network and not getting ping.
But when i am try through wifi then vpn good work.
Please help me as soon as possible.
Thanks
Sanjib

Hello Karthik,
I am using "MTS usb wifi" device and connect vpn through wifi Its working good the same win8.1 pro. But when i am try to connect VPN through LAN/Wired or USB modem (Like: Vodafone,MTS and others) its not working.
I am using Easy vpn on Cisco RV325 router in our office. Same VPN client is very good working in Windows 7 SP1 and Windows XP SP3.
Thanks
Sanjib

I plugged in USB cable but not showing connected status in my ipod 4th generation

I plugged in USB cable but not showing connected status in my ipod 4th generation

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

HT4623 phone is locked with a passcode and I don't have the passode, it says connect to itunes, and itunes won't connect because it says to enter passcode on phone. The device also does not show in itunes so I can't restore

iphone 4s is disabled. It says connect to itunes. Itunes ays could not connect because phone is locked with a passcode and to enter passcode on iphone before it can be used with itunes, but I can't enter the passcode because 1) don't know it 2) it's disabled. The device also does not show up in itunes, so how can I restore the phone or unlock it?

Same answer as last time you asked the exact same question:
HT1430 Iphone 4s says disabled connect to itunes and itunes won't connect because phone locked with a passcode. I don't have the passcode to unlock the phone

Device Connected But Not Showing Up In Network Map

Similar Messages

Maybe you are looking for