Device database mismatch

I am having a little problem with auto registering my 7941G phone. I am getting error messages on event viewer like "device database mismatch". The Call Manager is 4.1(3). Any idea?
thanks.
Pete

You will need to install the latest Device Pack (25.3) found here:
http://www.cisco.com/cgi-bin/tablebuild.pl/callmgr-41
Hope this helps. If so, please rate the post.
Brandon

Similar Messages

Can I completely reset /clear the bluetooth subsystem / device database?

I have a Canon MP600 printer/scanner and connected a bluetooth dongle to it (the official Canon part) for the first time today. Unfortunately the user guide omits a few important details and the net result is that both a Mac Pro (early 2008, BT module included) and Macbook Pro (~late 2006, Leopard upgraded) appear to have become very confused about what to do with it.
Initially, contrary to its documentation, the printer ships with bluetooth security turned off. So, my Mac Pro connected to it happily without requesting a passkey and I printed a test page OK. The laptop wouldn't see the printer, though; it seemed that without security features turned on, the printer would only allow one computer to connect. I dug around in the printer's settings (it has an LCD screen so you configure it on-device), found the security option, enabled it and set a passkey (a 4 digit number in this particular printer's case).
Using bluetooth preferences on the Mac Pro, I removed the printer from the device list, then re-ran the setup assistant. It saw the printer, immediately recognising its name (the first time ever, the machine showed the address first, then the name a while later). It prompted for the passkey at the "gathering information" stage. In bluetooth preferences, the printer icon was showing 'Connected' status. At the "To complete the set up..." stage of the setup assistant, I named the printer, clicked on Continue, and watched the printer status suddenly change to not connected. The setup assistant re-showed the "To complete the set up..." page; I set the same name again; this time, I was taken to a page saying "You did not configure any of the available services for your Bluetooth device". Huh?! Extended information on the device in BT preferences says says that it's configured and paired, but not connected. Searching for the error message on Google produces literally no hits, which is a rare thing indeed.
Worse still, the laptop now does exactly the same thing. I've even tried turning off security entirely on the printer, power cycling it and rebooting both machines, but now neither will properly talk to the printer ever again. They just flicker through these strange "Not connected -> connected -> not connected" cycles and refuse to proceed with the obscure "You did not configure..." message.
Given that the Mac Pro successfully printed via this printer at least once, I should be at least able to get the thing to work again with security settings turned off (inadvisable though this is). But Leopard refuses. It's caching some data about the printer somewhere and this is screwing things up.
So, the short part of my very long question is: How do I totally reset the bluetooth software and/or hardware subsystem / device database so that it has no "prior knowledge" or expectations of devices which it detects?
Many thanks.

Replying to my own message for the sake of search engine archives.
I have not found a way to reset/clear the 'knowledge' that the Bluetooth system seems to keep of devices once it's talked to them, or, therefore, a solution to the strange Bluetooth setup assistant behaviour. Curiously, though, the 'not connected' issue with the printer doesn't seem to stop it from being printed to.
Having rebooted a few times, I printed a web page accidentally (! - I meant to save as PDF from the print dialogue box) and the device brought itself on line, received the data and printed, then dropped offline again. So it seems to be working fine. My guess would be that the online/offline behaviour is actually a normal feature of the way this particular device works, while the strange setup assistant behaviour is its way of saying that the device is already set up and working so it has nothing else it needs to do.

Sudden hotsync "device database version is incompatible" error

I have a Sprint Treo 755p with software version 1.07. Desktop is 4.1.4.
Hotsync has been working fine for 6 months. Suddenly yesterday I started getting "The device database version is incompatible with this conduit. Doing nothing" in my hotsync log (see below for log result) . Contacts are synchronizing, memos have disappeared, and calendar is not synchronizing. After attempting to synchronize the 755p soft resets. It also soft resets when I do a string search and while it is searching the calendar. This may have all started yesterday when I sent a text message. The message went then the phone froze. I haven't had any freeze-ups with this phone so I was surprised. I popped the battery, but after restart my text message history was gone.
Did something get corrupted? I'd appreciate any advice.
OK Quick Install
VersaMail
- Sync configured to Do Nothing
-- Memos
- The device database version is incompatible with this conduit. Doing nothing.
OK Calendar
OK Contacts
OK Tasks
-- Backing up AddressingLibRecent-HsCh to C:\Program Files\palmOne\DJ\Backup\AddressingLibRecent-HsCh.PDB
Thanks
John

Never mind. I deleted the following files Memodb and MemoDB-Pmem, hot sync'd and now I am able to get Memos to open. Guess I had something in the database that didn't jive.
Post relates to: Treo 680 (Unlocked GSM)

An error has occurred during an attempt to access a device database record (Bold 9900)

I've got this error messages and both my desktop and device software are updated. Does anyone know how to fix this? Tks!

Hi and Welcome to the Community!
From that information, there are a number of possibilities...rather than list them here, I recommend you search on the error message in the public KB database:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Lync 2013 Database Mismatch Error

Hi
We are experiencing the following error in Lync 2013 after migrating from 2010:
Microsoft Lync Server 2013, Master Replicator Agent successfully registered with the back-end, but a schema or sproc version mismatch was detected.
The service will not start until this problem is resolved.
Database version: Actual = 10.8, Expected = 10.13.
Cause: Installation error.
Resolution:
Ensure both Microsoft Lync Server 2013, Master Replicator Agent and back-end were installed or modified by the same installation package

Hi,
Have you moved the Lync Server 2010 Configuration Management Server to Lync Server 2013 successfully?
You could move the users back to Lync 2010 and reinstall database. You can refer to “Preparing Lync Server 2013 Front End Servers before moving the Central Management Server” in the following link:
http://technet.microsoft.com/en-us/library/jj688013.aspx
Kent Huang
TechNet Community Support

Best Practice Analyzer database mismatch error

Hi all,
I am getting the following critical error when I run the BPA on a couple of our BizTalk servers and wondered if anyone had seen the same?
"The version of BizTalk Server does not Match the Version of BizTalk Management Database Schemas"
I am using v1.2 of BPA aagainst a BizTalk 2010 install.
This has only surfaced since we upgraded from BizTalk 2009 R2 BUT not on all of our environments.
It does not seem to be causing any runtime issues however as all applications seem to be running fine!!
Looking at the BizTalkDBVersion tables in SQL everything looks the same on servers which present this error and those that do not i.e. There is an entry for version 3.9.469.0 ... which matches the BizTalk Server version reported in the registry
at "\HKLM\Software\Microsoft\BizTalk Server\3.0\Product Version\"
The only thing I can see is that as this was an upgrade there is also an entry in the
BizTalkDBVersion tables for the 2009R2 version (3.8.368.0), so maybe the BPA is selecting this value and comparing against the regisrty version?]
However, this doesn't explain why I see this issue on 2 upgraded servers but not the 3rd?
Any ideas?
Regards,
Dave

Hi Dave,
There is no version as BizTalk 2009 R2. v3.8.368.0 refers to BizTalk 2009 (not R2).
The above error occurred because BizTalk Server Best Practices Analyzer has detected that the version of BizTalk Server does not match the version of the BizTalk Database Schemas. This can happen if the BizTalk database was deleted and then restored
with an incorrect database.
Check the version of SQL Server upgraded against the version of BizTalk server.
Reference BPA Help file:
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Error has occurred during an attempt to access a device database record

Model: Blackberry Curve 9360
I've updated Blackberry Desktop and Device software to the lastest version and I recently changed Outlook 2010 from 32bit to 64bit. Now I'm getting above error. It will not sync contacts/calendar/task one-way/two-way with device.

Hi and Welcome to the Community!
There are actually several KB articles that contain that error message...I recommend you go here:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
and search using the error message...inspect the results to see if any apply to your situation.
Also make sure you are using a version of the BlackBerry Desktop Software that is compatible with OL2010x64:
KB12268Synchronization support for BlackBerry Desktop Software for Windows
Otherwise I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Error when syncing contacts - An error has occurred when trying to access a device database record

I started getting this error while syncing. I narrowed it down to the contacts. If I sync just the calendar then it works fine. How do I resolve?

You could add your contacts in one by one (or a few at a time) on whatever you are syncing with (Google, MS, etc.) and try and catch which contact is causing problems when you sync.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Getting this error whenever i sync my Q10 with Link "An error has occurred during an attempt to update a device database record."

Sync is not even completing any ideas or workaround. What am i doing wrong?
Urgent help needed.

I have the exact same issue. Did you get this sorted by now?
Joerg

Raw device based database

Have anyone tried to use raw devase base database?
I tried all teh documentation available but could not find
anything about this
If I tell Orecle to create a database on a raw device (like
/dev/sda6), it tries to erase the file. However it should accept
it I suppose. Mounting the device /dev/sda6 under a directory
doesn't help either. Is it normal behaviour and I am missing
something or raw device database structure is not implemented
under Linux yet?
Thanks in advance
null

Nicholas Tufar (guest) wrote:
: Have anyone tried to use raw devase base database?
: I tried all teh documentation available but could not find
: anything about this
: If I tell Orecle to create a database on a raw device (like
: /dev/sda6), it tries to erase the file. However it should
accept
: it I suppose. Mounting the device /dev/sda6 under a directory
: doesn't help either. Is it normal behaviour and I am missing
: something or raw device database structure is not implemented
: under Linux yet?
: Thanks in advance
Linux dosn't support raw devices. Oracle requires symbol
device but in Linux you have only block devices. Also access to
this devices is cached by OS.
null

What are your future component database plans?

I have been a longtime user of Multisim, Ultiboard, (and Ultiroute) power pro edition. This includes the PartMiner days before NI bought EWB. While component manufacturers commonly have component databases for use in the suites of your competitors, there never seem to be any available for your products. Now, access to these databases would save a lot of time. I don't use simulation a lot because you don't provide behavioral simulators, and my designs mostly include processors or controllers. Even Analog Devices' database, which advertises a Multisim and Ultiroute subset, won't load on my platform. Can you explain why you don't either digest the ORCAD datasets or pursuade Analog Devices, Microchip, TI, et al to provide multisim versions of their data?
I have long been a supporter, and am just seeking to make my life simpler.

Hi Thomas.
When you say "MDM as Catalogue", which means utilizing the features available in SAP-MDM(Like Portal iViews) and use it as functionality provided for catalog solutions instead of going for SRM-MDM Catalog - correct me if my understanding is wrong.
If this is the case, then you can simply fetch the records available in the repository and showcase it using portal iviews and
use it for procurement solutions(for SRM-Shopping cart etc) using check out functionality.
But SRM-MDM Catalog is designed specifically for certain functionalities like showing different prices like Contract, Purchase Info records, List price etc which is not possible in portal iviews, Service Catalog for showing hierarchies, showing various types of item types(BOM, SK1, SK2, Components etc). Similarly there are some more features which is available in SRM-MDM Catalog which lacks when we use "MDM as Catalogue"
But still SAP can come up with more features if they have plans to bring up a common catalog solution for various solutions.
Hope this helps.
Regards
Bala

Oracle 9.2 RAC installation error on raw devices

During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.
How does Oracle validate the raw file?
What does this error mean?
Igor.

During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.OK, so you are saying that /dev/raw/clustdb_raw_cwmlite_100m is link to /dev/raw/raw<x> (x some number)??
If not - there is your error.
How does Oracle validate the raw file?File MUST exists (or link) AND it must be a RAW device.
You can check it by raw -qa (it should display all raw devices, with theirs major-minor pairs)
What does this error mean?
Igor. Hrvoje

I want to know VendorID of pci devices in system.

Hi.
I have a question.
I want to display vendor ID & device ID of My pci devices in solaris system.
in windows driver...
#define VENDORID          0x1234
#define DEVICEID          0x5678
for( bus = 0 ; bus < 256 ; bus ++ )
for( slot = 0 ; slot < 32 ; slot ++ )
dwRet = HalGetBusData(PCIConfiguration, bus, slot, &Buffer, sizeof(PCI_COMMON_CONFIG));
if(dwRet == 0)
continue;
if(Buffer.VendorID != VENDORID)
continue;
if(Buffer.DeviceID != DEVICEID)
continue;
DbgPrint("Bus:%d Slot:%d\n", Buffer.VendorID, Buffer.DeviceID);
but i don't know how search "My" pci devices in solaris system.
is there some command?
please show me the way. (by simple code)
bye..

The information is available in the output from the "prtconf -pv" command. Each PCI device is listed
with it's "vendor-id:" and "device-id:" property, as well as the "subsystem-vendor-id:" and "subsystem-id:".
Note also the value of the "compatible:" property, which is used by the solaris kernel to select a device
driver for the PCI device.
Node 0x1b4d10
assigned-addresses: 81005020.00000000.00001060.00000000.00000020
class-code: 000c0300
compatible: 'pci925,1234' + 'pci925,1234' + 'pci1106,3038' + 'pciclass,0c0300'
device-id: 00003038
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
model: 'PCI: 925,1234 - class: Universal Serial Bus'
name: 'pci925,1234'
power-consumption: 00000001.00000001
reg: 00005000.00000000.00000000.00000000.00000000.01005020.00000000.00000000.00000000.00000020
revision-id: 00000004
slot: 00000003
subsystem-id: 00001234
subsystem-vendor-id: 00000925
unit-address: 'a'
vendor-id: 00001106
You can also use my "prtpci" awk script to reformat the "prtconf -pv" output
wget http://www.tools.de/solaris/prtpci.bz2
bunzip2 prtpci.bz2
chmod +x prtpci
./prtpci -u -p pcidev.csv (optional, fetches PCI device database from http://www.pcidatabase.com)
./prtpci
the output from that script for a PCI device looks like this:
Bus,Device,Function: 0,12,0
Vendor,Device ID: 1106,3038 Rev 50 (VIA Technologies Inc, VT83C572)
Subsys. Vendor,Device: 925,1234
Class code: 0c0300 (Serial Bus, Universal Serial Bus, UHCI)
Interrupt pin: 1
assigned-addresses:
I/O 0000000000001080 0000000000000020 (@20)
Model: 'PCI: 925,1234 - class: Universal Serial Bus'
Name: 'pci925,1234'
compatible: 'pci925,1234' + 'pci925,1234' + 'pci1106,3038' + 'pciclass,0c0300'

Raw Device Backup to file system(OPS 8i)

Hi
Our currently setup is
Oracle database 8.1.6 (Oracle Parallel Server) Two Node
Noarchive Mode
Solaris 2.6
all database file ,redo logfiles,controlfiles under raw device.
database size 16 G.B
oracle block size 8192
currently we are using only export backup of oracle.
But now i want to take cold backup of oracle database to disk.
cold backup Raw --> Disk
How we can take cold backup with dd command and skip parameter ?
Is anybody have practical idea of dd command with skip parameter.
Thanks and regards
Kuljeet pal singh

you can use ufsdump instead of dd

No matter what, I cant get the Device Selector to become active in Netbeans

This is totally frustrating. For the life of me, I cannot get the Device Selector to work
On my Development machine
I've installed all the prerequisites for Java ME SDK 3.3 EA (Early Access) using Raspberry Pi.
Windows 7,
Netbeans 7.3 full bundle with support for ME
Jave ME SDK 3.3 preview
The device address manager is set up
the nb-me-sdk-plugins-uc plugins have all been installed
the j2me platform has been installed under the "Java Platform Manager"
the customer device editor has been set up to simulate my raspberry pi exactly as in the video below
under Installed Plugins, Java ME is active
On my Raspberry Pi
Java ME 3.3 is on my Raspberry Pi
I can run the testuser.sh program
I'm trying to follow along on the Oracle video by Simon Ritter
http://www.youtube.com/watch?v=nA7AMuTK9sE&feature=youtu.be
No matter what I do, I cannot get Tools->Java ME->Device Selector
or Tools->Java ME->Active Device Manager to become active.
I've spent the better part of the day trying to figure this out, and I've had no luck. What am I missing?
Vinnie
Edited by: vdipren on May 25, 2013 7:27 PM

Hello Alexander,
I also tried to install netbeans and Java Me, and got stuck on the same problem as Vinnie: the menu item `Device Selector` is grayed besides most other items in the same menu.
The grayed menu items in menu Netbeans/Tools/Java ME are:
          WMA Console,
          Java ME SDK Update Center,
          Custom Device Skin Creator
          Active Device Manager
The only one that is not grayed is: 'Device Database Search'.
I made sure the device_manager is running. You asked Vinnie to run emulator.exe from the commandline. I did and it outputs the help instructions.
I like to provide you with the log files, but how to do that? They are quite big! Dou you want me to paste the contens of the files in here?
Thanks for giving it your time.
Jan

Device database mismatch

Similar Messages

Maybe you are looking for