Device Default Refresh Time

I was wondering what the default refresh time is for ZCM 11.2.4 MU 1?
Is there a recommended time that we should be setting this too?
Currently we are set at 2 hours, for a partial refresh, and 12 hours for a full refresh.
Has anyone seen/recommend that those settings should/could be adjusted to allow for faster refreshes?
Thanks,
-DS

That will "Slow Down" the refresh rate, but may speed logon times.
Unchecked, means it would check immediately and not delay to speed logons.
The Default delay is 5-6 minutes.
If you want new assignments to appear more quickly throughout the day,
you need to lower the partial and/or full refresh.
Partial Excludes Bundles but is everything else.
Full is everything.
Since Bundles may be want most interests some customers, I have seen
some have just turned off Partial and only do full at an increased
frequency.
Monitoring performance is important as you decrease the interval.
On 3/5/2014 1:56 PM, dschaldenovell wrote:
>
> Good day,
>
> We have now checked the box for Timed Refresh : Random Time to Wait :
> setting the following : Minimum: 60 seconds Maximum 75 seconds Full
> refresh Schedule 0 days 12 hours 0 minutes and Partial Refresh Schedule
> 0 days 2 hours 0 minutes
>
> Previously this was unchecked and the values were grayed out but read 60
> seconds and 75 seconds respectively
>
> We are going to be asking the staff to test
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

Changing default refresh time for the UWL.

Hello,
I am trying to change the Default refresh time for the UWL(workflow inbox) for all the users before they personalize or save the refresh time, Would changing the refresh time in the .xml file work or is there any other way to do it? Thanks,
Aniketh R.

We have had all sorts of issues with this as well. I have been unable to find a solution that works as of yet. From my own debugging it seems as if RP is trying to parse the pasted text as logo's, fields etc.... I am looking at potentially using a script w/ set interval to "clean" the clipboard data but this isn't a perfect solution for numerous reasons.
What is happening to your letters when the users paste? Our letters actually become unusable after a plugin save. So I am actually very interested in the answer to this question!

How do I speed up the email refresh time on my Mac ? iPad and IPhone almost a minute or more faster using same connection?

How do I speed up the email refresh time on my MAC?

Hi ToddSATX,
Thank you for contributing to the Apple Support Communities.
It sounds like you receive email a few minutes faster on your iOS devices than on your Mac. This may be normal behavior, although there are a few settings that you can check if the delay is longer than that.
If you have a portable Mac, you may notice an improvement when it is connected to the power adapter. You can also select "Use IDLE command if the server supports it" from Preferences > Accounts > Advanced in the Mail menu (at the top left of the screen).
You can find this information here:
Mail (Yosemite): General preferences
Check for new messages
When Mail gets new messages from the mail server. By default, the option is set to Automatically (Mail varies how often it gets messages, based on whether your Mac is plugged into an electrical outlet).
An IMAP account may get messages more frequently if the mail server supports the IDLE command; make sure the option to use it is selected in the account’s Advanced pane in Mail preferences.
If you set the option to Manually, click the Get Mail button in the Mail toolbar to check for messages. (Whenever you click an IMAP or Exchange mailbox, it syncs with the server, and shows new messages.)
Best Regards,
Jeremy

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

Outlook email as the device default calendar

I got my Blackberry at the end of February,and established my Outlook email as the default email for the device calendar and have had no problem sync'ing the calendar and contacts between Outlook and the device using the Blackberry Desktop Software.
A Blackberry core update was pushed and installed on the device recently, and since then, the device could not keep the Outlook email as the email for the device default calendar.  Each time when it occured, one of the two things happened: either any appointment I entered on the device would be labeled as Outlook email calendar item, separate from all items of the device default calendar (visible in different color indicator), in which case the added appointmend could not be sync'ed to my desktop Outlook calendar; or all my default calendar items would be reassigned to Outlook email calendar (the color indicator changed to green instead of the default blue), in which case  the device would ask to delete ALL appointment items on my desktop Outlook calendar when sync'ing because it couldn't reconcile the default calendar with the Outlook email calendar.
Each time when the problem occurs, I would delete the Outlook email (so that the device had no default email) and then reinstalled it so that the Outlook email was the email for the device default calendar.  The sync works after that but only for a short while each time. Then the problem reappeared.
When I sync'ed the device with desktop Outlook,  I also noticed that on the device under Setup > Email Accounts, the Synchronization Options for the Outlook email has only the box for "Deleted Items" and not boxes for calendar and contacts, though I don't know whether that makes any difference.
I suspect there must be something wrong in the recent Blackberry core update that is messing up the default calendar when it's linked with an Outlook address. Could you help fixing this problem please.
Solved!
Go to Solution.

Hi,
Just to clarify I did not question the VPN connection as being the problem with your email. My point was accessing a networked MS Outlook email account via VPN would I think change the way the sync and reconciliation worked.
The term device default in these calendar discussions can be confusing as "default" is used as a CICAL calendar description and a device calendar description.
The service books could have certainly caused the problems. I would suggest reading this article describing how the device calendar works with items not associated with a CICAL from an email associated calendar. The merge function is not the point, the calendar process is.
Please let me know your thoughts.
Thanks,
Bifocals
KB19240 How to merge multiple calendars into one calendar on the BlackBerry smartphone
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Snapshot refresh time

Hi
I have the following snapshot on oracle 8.1 :
CREATE SNAPSHOT LSBAN30Y_SNP
PCTFREE 0
PCTUSED 99
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 256000 K
NEXT 25600 K
MINEXTENTS 1
MAXEXTENTS 505
PCTINCREASE 0
FREELISTS 1
FREELIST GROUPS 1
BUFFER_POOL DEFAULT)
TABLESPACE BP_DATA
LOGGING
NOCACHE
NOPARALLEL
USING INDEX PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
BUFFER_POOL DEFAULT)
REFRESH COMPLETE
NEXT greatest(trunc(sysdate+1), NEXT_DAY(trunc(sysdate)-5 ,'MONDAY')) + 4/24 + 30/1440
WITH ROWID
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE AS
SELECT
ACCT_ID BILLING_ACCOUNT_ID,
CUST_ID BLG_SYS_CUST_ID,
ACCT_ESTAB_DAT SYS_ACCT_ESTAB_DAT,
ACCT_STAT_CD SYS_ACCT_STS_CD ,
decode(SCE_SYS_ID, '1', 'C', '2', 'C', '3', 'C', '4', 'W', '5', 'W', '6', 'E', '7', 'E', null) LEG_SYS_RGN_INDR,
BTN BLG_ACCT_TLPHN_NO ,
BTN_CUST_CD,
BTN_SFX EASTERN_SUFFIX,
TYP_OF_ACCT_CD BTN_TYP_OF_ACCT_CD,
PRI_CLSS_ID CLSS_OF_SRVC_CD,
' ' BTN_CONTRACT_NO,
RTRIM(BLG_NM_LN1)||' ' ||LTRIM(BLG_NM_LN2) BTN_BILLING_NAME,
PCL_IND PCL_INDR,
BILL_PER SYS_BILL_PRD_INDR,
GR_ACCT_ID SYS_SPCL_BLG_GR_NO
FROM
CSBAN10V@UCDWP001
where ACCT_MKT_UN_ID in ('C', 'D', 'F', 'G', 'I', 'L', 'O', 'P',
'R', 'S', 'V', 'W')
and rownum < 5000000
I have created indexes on BILLING_ACCOUNT_ID and BLG_SYS_CUST_ID.
There are 4.3 million records in the snapshot.
It takes 6hrs to refresh the snapshot.
The questions I have are:
1. How can I reduce the refresh time? Is it because of the indexes? Should i make any change to the create snapshot script?
2. The create snaphot query works fine without the rownum < 500000 statement in oracle 9i but in oracle 8i it gives
CSBAN10V user not found in UCDWP001 error. It works OK with the rownum < 5000000 statement. Why is that so?
thanks
prash

You are specifying that the refresh must be COMPLETE, so Oracle has to transfer all 5,000,000 rows over the wire from the remote database every time. If you specified that the refresh could be FAST, and created a materialized view log on the remote table, Oracle would be able to transfer only the changed rows each time you refreshed.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Input Form/Reports Refresh time

Hi all,
We have input form/reports which takes about 45 seconds to refresh which is ok for the first time but the frustration from the user community is that every subsequent refresh also takes 45 seconds for even a small change. Is that possible to reduce time on the subsequent refresh time?
Please share.
Thanks,
D

Hi Devang,
Refresh means that all data on the form have to be read from database. You can play with user settings: Refresh only Expanded and Inserted Members; Refresh only Data on "Save & Refresh Data", but not sure it will help.
In general, the initial refresh for 45 seconds is a bit long. Do you have not default measures and dimension member formulas in the report?
Vadim

Cleaning Memory (Blackberry device default cleaner)

Hey folks... I have the Curve 8530 and Boost Mobile is my carrier,,,
In my readings of Blackberry Support or the "Help" part of the phone, I was reading. Information about the Cleaning the content cache and I am very certain that I read that the devices default memory cleaner was not designed for every day use and that a third party app is recommended...
Now... Whenever I am deleting cache history whenever I backout with the Escape key I get a popup appear wich reads "CLEANING MEMORY" .. Now with what I read and with the device using an apparant default or device memory cleaner every time I backout of Browser Options,,, is tha hurting my device using the cleaner for that? I bought the phone new and never changed a setting in that area pertaining to "memory ceaning. Do I need to download a cleaner for that action?

Hi huntmarv,
This article should help explain memory cleaning on the BlackBerry. http://bit.ly/ezYp3M
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Calendar Entries change to Device Default rather than associated e-mail address when upgraded

Hi,
I upgraded my Curve 8330 software to the latest. Once this was done, I noticed my calendar entries are now showing Device Default in the Send To field. When I try to sync with my Outlook Calendar (2007), it won't sync these particular entries. In actual fact, the same entries that are in my calendar (that were sync'd prior to upgrade) contain many of the entries that were associated with the e-mail address. So, I got duplicate entries on my device.
I tried going the route of doing a 1 way sync from my device to Outlook, but it, it wasn't recognizing the Device Default entries. And I can't go the route of a 1 way sync from Outlook to my Device since I have since made many changes on my device.
What can I do to get the Device Default calendar entries to sync (even 1 way sync) to my Outlook calendar? I have hundreds of entries and I don't want to have to redo all of this each time I upgrade. (Not even sure why my calendar entries flipped like this on my Curve to give me this problem in the first place).

Hi and welcome to the forums!
1. Take a look at options-advanced options-default services. The CICAL (calendar) and CMIME (messaging) should the email address originally associated with your BB.
2. Entries in the device default will not sync with Outlook.
3. Read this KB article paying particular attention to Cause 3. http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB16063&sliceId=SAL_Pub...
Post back with any questons.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Observing mutiple computers lower page delay or refresh time??

I am trying to use ARD 3 to monitor couple computers.
But the default refresh rate a real time and taking up too much bandwidth.
I wanted to observe those computer with an update rate of every 15 minutes.
Is this possible?
The problem is the Page delay is grey out under view options.

The delay does not represent the refresh time. The delay represents the amout of time to stay on a particular page before rotating to the next page.
To make the slider active, simply decrease the number of computers visible on one page.
ARD is in constant contact with the machines you are monitoring. There is no way to only update every 15 minutes.

PulseAudio can only use 1 device at a time.

I have enabled "simultaneous output" in PulseAudio Preferences, I run pasystray(pavucontrol for volume), and want to use both HDMI-output as well as internal output in different application at the same time, but sound configuration (both pavucontrol and phonon) only lets me activate 1 device at a time (by selecting card profiles).
If I select "Builtin Audio Analog Stereo" I only get sound from my internal speakers or headphone jack, if I select "Digital Stereo (HDMI) Output" I only get sound from my HDMI-output. Also I only get the selected device as options when selecting output device in the application(stream) list.
I am using KDE4.
Can someone please help me?

I have no idea how to do what you're doing using those GUI tools (nor, likely, will anyone else here). When I used to need this I just loaded module-combine and set it as the default sink (did it in /etc/pulse/default.pa though you should be able to do it for only your user in ~/.pulse or something).

8g touch updated 4.2.1, problems synching apps and music. gives multiple errors; device times out, internal device errors, network times out, duplicate file, too many files open. itunes diagnostics ok. what to do?

have an 8g ipod touch which has had problems trying to play games and downloading update 4.2.1. went to the apple store who kindly downloaded the software update but now can't synch and generates multiple error messages; device times out, internal device error, network times out, duplicate file and too many files open etc etc. have latest i tunes download and diagnostic test ok. what can i do?

Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
-- cj

Why in ospf , lsa refresh time is set as 30 minutes

Hi all
i have doubt regarding the ospf lsa refresh time interval . why this is set as default by 30 minutes . is there any particular reason for this ? Please let me know

Hi,
RFC 2328 stipulates two facts:
The maximum age of an LSA is 3600 seconds. After an LSA has reached an age of 3600 seconds, it must be flushed.
Every LSA has to be reoriginated (that is, refreshed) every 1800 seconds.
The choice of 1800 seconds for the refresh interval is purely a very conservative estimate of the advance in which an LSA should be refreshed so that it can still be propagated to all other routers in an area or OSPF domain in time before the old LSA expires by reaching the age of 3600 seconds. In essence, the choice of the refresh interval at 30 minutes gives the network an additional 30 minutes to propagate the refreshed LSA before the old one expires.
In fact, current Cisco IOSes do not go by the exact 1800 second interval. The IOS has chosen various approaches to scheduling the LSA refreshing process, and it is very nicely described in this article by Petr Lapukhov:
http://blog.ine.com/2009/12/31/tuning-ospf-performance/
Scroll down to the part called LSA Group Pacing.
Best regards,
Peter

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Device Default Refresh Time

Similar Messages

Maybe you are looking for