Device disabled after entering wrong passcode
Device disabled after entering wrong passcode
Dear Sir,
When I update iOS set up a passcode to secure the use of my iPhone, and then enter the wrong passcode, now I see a message saying my device is "disabled".Please help me, what to do I have forgotten and can't remember my passcode, and my device displays a message saying it is iphone is disabled. I have apple ID and password.
Md Rafiqul Islam
NZ
There is no "recovery". If you can't remember your passcode, you'll have to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/HT1808
This will remove the passcode.
Similar Messages
-
device disabled after entering wrong passcode.
Please help me in getting this unlocked without lossing the data as the data is really important for meI think you should call via phone or perhaps take it to a phone store. I suggest taking your id, box packaging and other necessities such as the reciept of the phone being purchased.
Hope this helped -
After entering wrong passcode and I don't have the computer where I sync first time my iphone
How can I activate again in other computer?
Thank you
Have a great dayitzcoatlcarrillo wrote:
After entering wrong passcode and I don't have the computer where I sync first time my iphone
See here > http://support.apple.com/kb/HT1212
In particular... here... If you have never synced your device with iTunes -
Please help :
My iphone4 was block becouse I enetered a wrong passcode several times, I really forgot the code I 've previousely set.
How can i reset the Phone, or to retrieved the code ? probably can be re-set by retrieving from email.
thanks
williamFollow the directions here:
http://support.apple.com/kb/ht1212 -
My ipad is disabled after entering wrong password
Please help me. My ipad is disabled after entering wrong password. i actually forgot my password and in the course of trying for several times, it became disabled. Please how can i enable and unlock it. I tried connecting to iTunnes on my laptop but the iTunnes could not connect, saying the ipad is locked.
Please how can i get the ipad back to use.
ThanksI've never set a passcode on my devices. I already have enough of them between work and my mail accounts, FacBook, yahoo, etc. If i ever do and I have a problem, I'll remember that this information is out here...
Sly -
How to enable iPad with right passcode after entering wrong passcode 6 times
Hi, my iPad is disabled because my daughter entered wrong passcode more than 6 times. I do remember the passcode myself.
How can I enable the iPad without wiping everything? I do not see an option to enter passcode anywhere. I never backed up my iPad. When I connect the iPad to iTunes, it keeps on giving the message that respond on iPad. But the iPad only shows that iPad is disabled.
Find my iPad is also not enabled.
I recently upgraded the OS to iOS 8.
Thank you for your help in advance.FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
im an amateur when it comes to this stuff, but catch on quickly. i have found all sorts of push these two buttons, hold and wait for apple, plug in, and that is where i get stuck...........ugh!
Have you tried either of these methods to restore?
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device. -
How can I get my phone back on - Its showing disabled owing to putting in wrong passcode. I recently upgraded to 7 software - before that I didnt have a locked password. Can I disable 7 software.
Hi chilli01,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212?viewlocale=en_US
Cheers,
- Judy -
my i phone is not working only incoming are there.
showing i Phone is disabled connect to i tunes but my laptop is not sync with i phone 4
how do i repair it.
reason for default is entering wrong password again & again.Hello rituvmishra,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Have a nice day,
Mario -
I entered the wrong passcode too many times and now my iPhone is disabled. What can I do to retrieve the passcode?
iOS: Forgotten passcode or device disabled after entering wrong ...
-
my iPad is disabled after entering many wrong passcodes by my kid, and is asking me now to connect to iTunes to get enabled again (unlocked), however when I connect to iTunes, it asks me to first unlock the iPad? what is the solution
You need to place the device in recovery mode ...
f you can't remember the Passcode, you need to restore the device from the computer it was last synced with.
Instructions for putting the device in recovery mode > iOS: Unable to update or restore
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present -
My ipod touch is now disabled after entering the wrong passcode too many times. t says "connect to itunes" but itunes will not recognize the ipod because it is disabled. How do I enable it again? Thanks!
iOS: Unable to update or restore
-
HT1212 Ipad is disable due to wrong passcode entered
Ipad is disable due to wrong passcode entered. Could you please help on this
Follow the directions in the HT1212 article you attached above. It's the article that sent you here.
-
My iPad has been disabled due to wrong passcode which I have forgotten,How can open it again?I'm so desperate right now
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808 -
Both my iPod and my MacBookPro connect with my home Wi-Fi but my iPad will not even after entering the passcode. I have tried Full shutdown and tried other Wi-Fi's for which I had the correct passcode. My iPad would not connect. Any suggestions?
Hi! I am having the same problem. What's odd is that a few days ago- the ipad was connecting to the network fine. No changes made. Other devices can connect to this network. I have also been able to connect my ipad to other networks.
I have reset all network settings, reset my ipad, reset the router, hard stop reboot, turn on/off wifi connection. what's interesting is that when i click the arrow next to the network i am trying to log onto- the ip address, router, and dns numbers come up automatically and the router number does not fill in (also- this process takes a long time- at least 5 minutes).
any thoughts?
Maybe you are looking for
-
How to survive an ACS audit with aaa-reports!
For many organisations the Cisco Secure ACS server is the guardian of the network - controlling administrative access to routers and switches plus overseeing end network users over VPN, wireless and firewall. Its no surprise therefore that it should
-
My customer receives free goods (samples) from vendors. They are flagged on the PO as Free. This deletes the Invoice required flag. There are some countries that require taxes on these item. They want to enter the follow up invoice with MIRO referenc
-
Making two small hard drives into one big partition, so i can install jsdk
I want to install jsdk but my hard drive isnt big enough. I connected a second hard drive to the same cable as my 1st hard drive, i want to make one partition. Is that possible? How can i do it so to harddrives look like one hard drive when i open "M
-
Sub Column to be displayed in ALV
Hi All, The requirement is to display an ALV report with sub columns under a column. Can anyone guide me on how to display the sub columns under a particular column using ALV? Appreciate your help. Thanks and Regards Krunal Raichura
-
Hi people, I have got a tricky question. How can i write a PDF to a target destination using FTP? It seems easy but i have got same constraints, which are: 1 - I will get data from PDF in one string element (xstring in R/3, base64Binary in PI 7.0), t