Device Discovery problem

Hi,
I am having problem starting device discovery in Campus Manager. After looking at a couple of different things, noticed that DeviceDiscovery is in TRANSIENT TERMINATED ProcessState.
I attached device discovery properties file. Please anyone check and help me to find the issue. Thanks.
Best Regards
S.Rajkumar

Transient terminated is a normal state for DeviceDiscovery. See my LMS daemon cheat sheet at https://supportforums.cisco.com/docs/DOC-8798 for more details. When Discovery stops, the daemon will terminate.

Similar Messages

How to Fix Disappearing HP Printer Drivers -- Disable HP CUE Device Discovery Service

I have a new HP G60-530US laptop with Windows 7 installed (less than 2 months old). It is connected to an HP 7410 All-in-One Printer and a Brother laser printer.
Three times now, the HP 7410 printer has mysteriously disappeared from the installed printers. The Brother printer does not disappear.
To re-install the HP 7410 printer requires disabling the AVS using the Services,msc utility (not just shutting down the AVS (Panda in my case)). It takes 20 minutes or so to re-install the HP printer driver software.
HP tech support is clueless about the cause or cure for this.
The laptop people referred me to the printer support people and the printer support people referred me to the laptop support people. The last tech support guy suggested that I restore the system on the theory that if the problem persisted it would be a hardware problem and not a software problem. He seemed to miss the fact that the disappearing printer driver software only occured with HP printers.
HP technical support was worthless.
Some internet forums suggest that this occurs when HP machines are connected to different networks. I noticed my problem occur after I took the laptop on a business trip and connected to a different wireless network.
On Vista forums, I've discovered that the disappearing HP printer drivers has been a problem for some time over a wide range of HP printers.
The solution identified on those forums is to stop and disable the HP CUE Device Discovery Service. Apparently, this service is used to detect HP printers and add them to the HP Solutions Center software.
In my experience, the HP printer drivers disappeared when my laptop comes into range of a "foreign" HP printer with wireless capabilities. For example, my laptop dropped my configured HP wireless printer when I went to an office that had a different wireless HP printer installed. The HP CUE service trashes the existing printer driver even though you do not intend to install and use the "foreign" printer. That would also explain why the printer drivers disappear when visiting a hotel or other location where any HP wireless devices exist. It would also explain why non-HP drivers do not disappear.
I've disabled the CUE Device Detection Service (using the Services utility). I'll see if that works. From what I've read, the CUE Device Detection Service is not needed after you have installed your printer, but it remains in your computer's active memory just "in case" you want to connect to a new HP printer and install software for that printer. Said differently, after your printer is installed, it remains as useless HP software that clogs your machine's resources.
A patch from Microsoft or HP (e.g., a patch that disables the CUE service) would be a big help to users if the number of posts on this issue are any indication of how pervasive this problem is.

This seems to be a common problem that exists for many HP devices, varying computer moakes and models and different operating systems. So, the conclusion must be that it is a HP issue. WHY ARE THEY NOT FIXING IT?
Based on this I am quite happy to buy a different make of printer so how does HP justify the continuing lack of support?
I posted a message about my C7180 All-in-one which had been causing problems but I put it down to me making (unrelated) changes to my system then noticed it got worse when I connected a new Trust digital pad. However, even when the pad is not connected I get the problem of disappearing drivers with the printer still visible.
What seems to happen to my set-up is it works when it is first reloaded and used, but the next time I open the HP software it fails and no other software is able to print/scan on the device.
Can somebody explain what the CUE is? I'll give it a try but I don't know what it refers to.
Who'd have thought that in the 21st century, software/hardware engineeers still can't make a simpy process for a computer. Whatever happened to the promise of plug'n'play?
P.

LMS 4.2 Device Discovery

I have used every version of LMS since 1.0 and I'm very familiar with the software. My problem is with the last few versions and the device discovery feature. It seems that in earlier versions, once the seed device was configured and devices had the appropriate community strings and cdp was enabled, the device was discovered. With these earlier versions, all of my devices were discovered. Any new device added to the network was also discovered. I never had to deal with devices that were "Unreachable" as all my devices were "Reachable". My network has not changed. I still have the same core switch ip address since version 1.0. My edge switches are still configured for the network as they always have. Same community strings. What has changed is the LMS discovery process. What's going on with these "modules"? I have 120 devices on my network and 117 will be "Unreachable". Even the core switch is unreachable. I have tried CDP, Global, seed device, DCR as seed. Still the devices are unreachable. There are no firewalls or access lists. The LMS server has complete access to all devices. Does anybody have any thoughts, comments??? Or am I just being too picky expecting the software to just work? TIA

Nothing has chnaged as considerable in discovery module since inception. Addition of new modules and algorithm has just made it stronger and smarter.
If all the devices are unknown there is certainly some issue with communication using snmp. I would request to modify and if you think multiple communities may be there try to configure all and keep the target *.*.*.*.
Following guide on LMS discovery stands from LMS old versions to till date similar on how it works :
https://supportforums.cisco.com/docs/DOC-9005
-Thanks

Device discovery in Cisco Prime LMS 4.1

Hi,
im using CISCO PRIME LMS 4.1 for manage my network, i ran a device discovery job using a ping sweep on the ip ranges of my network, ie 192.168.1.0/24, 192.168.2.0/24 and so on... the discovery found all my devices, but it discovered duplicate devices with illegal ip Addresses, ie
ip                                    device
192.168.1.255               S1
192.168.2.0                    S1
192.168.2.1                    S1 (the real address)
all in reachable status.
i dont undestad why the program adds that repeated illegal addresses.. someone can help me with that issue??
how can i run the device discovery to avoid this problem?
Many Thanks.

Julio,
Don't let LMS decide on what IP address it will manage the device.
For example, let LMS do a lookup of the sysname in DNS, then it will use the IP address coming back from the DNS as management IP.
This is what I do to avoid this.
But I also feel that LMS should be bright enough to never manage the same device twice. I think Campus DFM or RME will eventually figure out the 2 devices are the same, but they can't "fix" what is wrong in the DCR.
Cheers,
Michel

Device discovery failed in ANM

Hi,
I've got the following error message when I want to import a 6506 in 12.2(33)SXI2 with an ACE module.
I've tried in ANM 2.2 and 3.0 = same problem.
Can someone help me ?
Device discovery failed: Exception occured for model:VlanModel
Exception occured for model:InterfaceModel
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort
com.cisco.nm.dice.pkgs.features.interfaces.dm.L2Trunk cannot be cast to com.cisco.nm.dice.pkgs.features.interfaces.dm.RoutedPort.
Thanks,
Greg.

Hi Greg,
The error message you are seeing is likely triggered by some un-expected configuration on the cat6k.
It is likely your cat6k configuration has an interface defined as a switchport which has a subinterface defined on it.
This is usually not allowed on most sup versions that we have seen and hence is not modeled/ cannot be discovered in ANM.
We have bug id CSCtd94658 opened for this issue.
You could try to have your customer remove the subinterface indicated above and then try the import into ANM.
Also, they could maybe add back that interface if really required after the initial import.
Since Cat6k configs are not auto-sync'ed in ANM, they will be okay until they do a manual sync.
This workaround in also documented in the release notes of CSCtd94658.
Thanks
Sujatha
========

Device Discovery Error (Lenovo Toolbox)

Today when I went to run Lenovo Toolbox, it would not completely load and would complain that it had a Device Discovery error and to hit ok and restart the application. Has anyone else been running into this issue? When I log in as another user it works fine. Someone elsewhere had mentioned something about Firefox causing the problem, but if it works on one profile and not another I don't see how the two are related.

I have the same problem on my T42p. Installed toolbox version 5.1.5183.17, with Firefox 3.0.8, upgraded from 3.0.7 and problem persists. Have tried with toolbox allowed and not allowed to go online, but halfway through its initial screening, the error appears: Device Discovery Error Your system was busy performing other tasks when Lenovo System Toolbox attempted to collect information. Click OK and restart the application. If the error persists, restart the system.
Restarting does no good. Firefox can be on or off. Same problem.
p.

Scsi device discovery in Cisco MDS switches

I was using this device discovery to find out how many luns can be seen on that server.
I tried to use discover scsi-target command and it does not give much useful information. and I do not want to add the OS WWNS on my LUN security in addition to HBA WWNS for the host group on the array end.
The problem that I am having is that I can see 7 LUNs out of 9 when I connect to Cisco MDS where as in brocade I can see all the LUNs.
I checked the LUN security and zoning and everything seems to be correct.
If Cisco SAN OS has commands where by I can see what LUNs can be seen on the switch, that would be really helpful. But It looks like LUN/LDEV info cannot be seen through discover command.
Please let me know how to troubleshoot this problem
Thanks

In the array, I tried to add switch wwn to the LUN Security and zoned the same switch wwn on the MDS. Is there anything I am missing. Thanks in advance
But still I could not see any LUNs. When I do discover command, NLUNS shows 0.
and the command sh scsi-target lun os win shows nothing.
discover scsi-target vsan 21 fcid 0xea000b os win
VSAN: 21 FCID: 0xea000b
PRLI RSP: 0x01 SPARM: 0x0012
SCSI TYPE: 31 NLUNS: 0
Vendor: HITACHI Model: DISK-SUBSYSTEM Rev: 5007
Other: 7f:00:03:12:cf:00:00:02

LMS 3.1 Device Discovery issue

Hello,
I have been getting myself familiar with LMS, but can't figure out why I am having issues seeing some devices. I can't find any solution to my problem on other posts.
I have a server farm connected to my core switch, both can see each other via CDP, and the SF can ping the LMS server. However, I have 'device unreachable' on device discovery and CiscoView. SNMP community strings are the same on each device, and are configured on LMS.
Any suggestions? Thanks in advance!

Hi,
LMS tries to contact each device directly via SNMP. If it can talk directly to the device, the device is added into DCR as Reachable. If it cannot talk directly to the device, the device is deemed as Unreachable and it is not added into DCR to be managed by LMS.
If LMS is unable to communicate it could be due to any number of things including timeout, incorrect community string, snmp-server view, firewall or access list.
A definitive way to determine the issue would be to perform a packet capture during discovery to see the SNMP transaction between LMS and an 'unreachable' device.
You can also try increasing the timeout value.
Thanks.

Device discovery does not work with Yosemite

After updating to Yosemite, my (13-inch late 2010) Macbook Air can no longer find the printer on my home network, although I can print by specifying the printer’s IP address. Furthermore, Airport Utility cannot find my Airport Extreme; it says Device Not Found while acknowledging that the Airport Extreme was previously part of my network. However, the same Mac has no difficulty connecting to the internet through the Airport Extreme. It seems that some device discovery protocol (Bonjour?) is no longer working on that Mac.
I updated our other Macbook Air (11-inch mid 2011) to Yosemite without any issues. It finds the printer on the network, and Airport Utility finds the Airport Extreme.
Any suggestions?

Hi, this is Detective Vdawg, and I came across a similar issue when I updated to Yosemite on my MacBook Pro (Retina, 15-inch, Early 2013). Here is what I did. First, turn off all bluetooth devices turn off your printer and your computer. Wait about 15-30 seconds, then press and hold these four buttons for five seconds: shift, control, option, and the power button. What that does is refresh the hardware components; your settings will remain the same as they were before. After the computer reboots, then everything should be working the way it normally does including your device discovery. If that helps, please let me know; also let me know if it does not resolve your issue for whatever reason. I will be searching for different ways to resolve this problem. If you come across any more issues along the way, I would be happy to help you if I can.

Msa device discovery tool download

Hi,
I am new to hp MSA P2000 storage. I need to know that, I have conncted MSA P2000 in DAS to the server. And I have download the support CD/DVD from the hp website. But under tool tab it is not showing MSA Device Discovery Tool to download. If I am not wrong it is used to discover the new MSA Storage connected to the server. If possible please provide the link to download....
Please help.
Thanks in advance.

There is no difference between device discovery using physical Interface IP address and discovery using lookback IP address. As far as the IP belongs to the particular device it will not create any problem. The choice depends whether you have loopback configured on all devices on your network or not.

TS1925 iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any an

iPad IOS 7.0.2 and Mountain Lion 10.8.5 Calendar colors do not match between computer and device. Problem did not exist until updated IOS arrived. Colours change of their own free will despite being corrected on both iPAD and MacBook Pro. Any answers?

Please do not post the entire messages log as it takes up unnecessarily a lot of space. It seems that there is a corrupt/nonfunctional file called
[email protected]nt.plist
Go to your hard drive, enter library, go into users, and go into launch agents and delete the thing above. Empty the trash and restart.

LMS 3.1 Device Discovery

Hi, Having had a fully operational version of Ciscoworks on a very old server we were advised to move it to a virtual server, with a new IP address. Unfortunately since then the device discovery is not collecting data on all devices on our network, and showing them as unreachable. Even though I have replaced the IP address in the configs on the network switches.
The odd thing is that it is finding 6 devices but not all of them. Just wondered if this is something anyone out there has seen before that may be able to shed some light for me.
Thanks
Jo

Hi,
Kindly make sure all the device are snmp reachable with the new IP from the CiscoWorks Server. However more information will be found by enabling the debugging for Device Discovery and then try to run the Device Discovery again.
To enable the debug for Device Discovery , kindly to Common Services > Device & Credentials > Device Discovery > Discovery Logging Configuration > select the modules you are using for device discovery along with Data Collector, Discovery DeviceInfo , Discovery Framework, Discovery util and run the device discovery again and then send the ngdiscovery.log from CSCOpx\log location.
Also kindly make sure you have make the required changes on the Schedule discovery settings as well since Schedule discovery have its own settings for Device Discovery as compared with Ad hoc Discovery settings.
Here is the good doc link created by Sir Joseph Clarke to understand the Device Discovery and for troubleshooting purposes.
https://supportforums.cisco.com/docs/DOC-9005
Note :- ngdiscovery.log contain information about the IP address of your device in the network.
Thanks,
Gaganjeet

CiscoWorks LMS 4.0.1 / Device Discovery

Simple question, not so simple answer?
I have tried multipule times to do device discoveries, the same 26 devices come up unreachable. I have checked, double checked, and tripple checked the snmp community ro and rw strings on the switches and that snmp is enabled.. All seems configured correctly on the switches. I have tried arp, ip ping, cdp, just about all of the proper discovery protocols. I have tired using different seed devices, even already known reachable devices.... I'm stuck, no clue why I can't get this going! Please help. As a side note.. If imanually added unreachable devices as an snmp target in snmp setting windows during device discovery configuration it will "reach" and add the devices.

John...did you get this resolve? I am having the same issues. Several of my devices with subnet of 10.83.*.6 (seed switches) are unreachable in CW. I can telnet to many of the devices from the CW server and see that the community string (RO/RW) is the correct string in the configure however, still unreachable. Was you able to get this working? I do have a TAC case open for this. Still working through the issue. Write back...thanks in advance.

Hello. I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support

I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster. This was not correct. Anyway, I got the device, had problems, did tech support, re-activated my MIFI. 1. Decided to return the device. Spent hours with Customer Service, then finally up to Management, they agreed to take it back and void the contact, I sent it back immediately – and instead of voiding the contact they transferred it to my MIFI! Please cancel the contract on the MIFI. 2. During the short time I had the Jetpack I continually received overage alerts, took it all the way up to 30 GB, each time I backdated the new data plan except twice when customer service did and failed to back date the increase, and once the computer locked customer service out and could not increase. The end result is I have a $495 bill, many of these alerts were false since I ended up with only 14 MG for the month, etc. I am asking that my bill be reduced significantly to reflect no overage and to compensate for these problems. Please open up a ticket for this.

I had Verizon JetPak and you will find it will eat data like crazy. I opted to sign on to ATT Uverse and configured my phones and other devices to the WiFi on the Uverse system. It took about 5 minutes to completed the configuration. I was using 10 to 12 GB monthly to support 5 devices. Even if you use Verizon DSL, you are still subjected to same GB allotment. In my area, Verizon DSL is not available. With Uverse, I have 250 GB monthly to use, and I have not even come close to using anything of that magnitude. I reduced my GB package with Verizon to 2 GB per month and since having ATT Uverse, I never use more than 1GB a month with Verizon.
I have no problem with Verizon cell phone service as we get a much stronger signal where we live than you can with ATT or any others. It is just my opinion, but if you are running multiple devices off Verizon Jetpak, you will eventually spend a fortune to keep pace. I pay $60 a month for 18 Mbps speed, although ATT have packages that cost much less. But, it saves me a bundle each month. The cost of Uverse alone is worth not having to run everything through a Jetpak.
If you have the option to use another DSL service provider in your area, I recommend dumping the Jetpak and sign on with another carrier.

Ipad 3 charger problem im using the original charger and it say is not apropiet for device.this problem star today. :/

ipad 3 charger problem im using the original charger and it say is not apropiet for device.this problem star today. :/

Take it to an Apple Store for evaluation and possible replacement.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Device Discovery problem

Similar Messages

Maybe you are looking for