Device Drive won't install correctly after 10.5 Upgrade-HELP!!!

HELP!!! I can't connect my iphone 3gs or my ipad2 since the 10.5 upgrade. When I connect either of the devices my PC says the driver is being installed but then it fails. HELP HELP HELP HELP!!!

Hi Tom,
it's very well possible that something is wrong with the amount. I have 4 different DIMMs installed: 64, 128, 256 and 512MB. The one of 256 MB might be the problem, so I've decided to take it out and we'll see what happens.
Meanwhile, I have to explain that my G4 has to 2 HDs, the original HD w/ OS 9.2 and a second bigger one w/ OS 10.5 (which doesn't want to start up again).
With the original HD as startup disk, I can still boot in OS 9.2 and that gave me the opportunity to check on the memory. Well, what I found out is that the RAM-disk was turned OFF (for both HDs). At the same time I remember that in OS 10.3 I had a problem with time/date reset, something that always would occur after unplugging the power cable. I always assumed it was a dead battery but today I had the battery checked and it's still ok, so I figure it must be something else. Perhaps the RAM disc that is turned off? Shouldn't it be on?

Similar Messages

Conexant audio device driver won't install on T510 with windows XP SP2

I am having trouble in installing audio driver for Conexant audio device on an SSD with windows XP SP2 installed already. After running the installer, it tries for a while, and says media device can't be found. But booting from the win7-loaded internal drive, I can see it in the device manager. I also see a few devices like base system device(?) in 'Other devices' category. Could you help me get audio on the windows XP?
Solved!
Go to Solution.

Hi,
Thank you very much for your reply that led me to helpful information. Unfortunately, it didn't fix the issue, but I think I'm closer to the resolution of this issue.
So, I believed I installed Intel chip set and power management drivers, but did uninstall and re-install including .NET F/W 3.5. Unfortunately it didn't work.
Your link led to pages of unknown/driver-less drivers and made me check more detail. I had only 2 PCI devices left in 'Other devices' category, so I checked the details of those as below:
1. PCI\VEN_10DE&DEV_0BE3: I searched this item on the web, finding that the vendor is Nvidia, but could find device 0x0be3.
2. PCI\VEN_8086&DEV3B56: this is vendor Intel, but again no device found. The closest one is SoL device, though.
So, it appears somehow the Conexant audio device is not even in 'Other device' category, and the intaller can't find the device. I wonder if some other driver grabbed this device, so it's not available for driver installation. I will do more investigation, but please help me address this. Thank you again, and in advance.
P.S. : I don't see the SoL driver installed after installing Intel drivers, and there is no 'Ports' category in the device manager, either.

My iMac won't install updates after restart. Please help?

My iMac will restart to install updates, but after logging in again, nothing happens. Even if I click the Apple logo and go to "Software Update", it tells me it still has to install the updates and to restart again. Having to end up with nothing again. Help please? =(

Check /Library/Updates/ for folders with numbers. If there are any, open one and double-click the one with a dist extension. If that installs, then repeat with any others. If not, manually download the updates and then install them.

Re-installing Elements after an OS upgrade - Help?

I'm finally going to upgrade from WindowXP to Windows 7, which I know will wipe out all of my programs. I have my installation discs for Elements 7, but upgraded online to Elements 8 two years ago. downloadig the software. Can anyone tell me how I re-install Elements 8 after I upgrade the OS? I can find my serial number under My Adobe but can't see where/how to reinstall the software. Thanks!

Hi ,
If you have bought the upgrade of the Element 8 which was the download then the download link should be present in the same Adobe ID through which you bought the product or in which your serial number is present
If incase the download is not present in your Adobe Id account then downlaod the software from below link and use your serial number to serialize it:-
http://www.mydigitallife.info/adobe-photoshop-and-premiere-elements-8-direct-download-link s/

Windows 7 is reporting that apple mobile device usb driver is not installed correctly using iphone 4

Problem when syncing iphone 4 under window 7 error message suggest that uSB driver is not installed correctly Error 52. Any ideas!

I had similar problems and found a useful site. My iPhone 4s and iPad weren't found by iTunes. Tried the suggestions below and my problem was fixed.
http://randomwindowstips.wordpress.com/2009/12/08/windows-7-itunes-9-software-is -not-installed/
Hope this helps!

New Intel video driver won't install

The new intel video driver won't install on my T410. Anyone else having the same problem? All I get is a Turbo Boost installation box. The intel video driver version doesn't update. I've tried manually installing via "update driver", but windows says that I already have the newest driver (even when i only have 8.15.10.2202).
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-74433
Win 7 Pro x64
T410 2516-CTO

It could be a typo.
http://download.lenovo.com/lenovo/content/ddfm/MIGR-74582.html#video
that shows what you have to be the latest.
After looking at it again it is a typo. It shows .2202 until you bring it up, then it shows .2253. I will let the admins know, ty for pointing it out.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Illustrator update won't install, even after uninstalling and retrying multiple times.

Illustrator update won't install, even after uninstalling (using the "Uninstall Adobe Illustrator CS6" app and retrying (using Adobe Application Manager}multiple times. Now I can't open AI CS6 at all.
The error message I get in Application Manager is:
"Application could not be found. Restore in case it was trashed/moved to a different volume. Reinstall the application otherwise (U44M1P2B)"
Help!

Can you please try installing the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
If that doesn't work then the safest course would be to remove all Adobe Creative Software using the uninstallers located in Applications/Utilities/Adobe Installers. This should then remove the Adobe Application Manager folder also inside Utilities. Once the software is completely uninstalled and the Adobe Application Manager is removed then you should be able to reinstall from https://creative.adobe.com/.

Latest itunes won't install correctly.

Hi there,
I've downloaded the latest itunes a couple of times now and it still won't install correctly and I can't open the itunes file.
I have fully deleted and uninstalled itunes to try from scratch but that still doesn't work. Any ideas? Also when I turn my computer on it says I'm missing files in order for itunes to work?
Lesley.

Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

HT1725 Error 7 (Windows error 193) iTunes won't install correctly.

Error 7 (Windows error 193) iTunes won't install correctly.

Perhaps first try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
... but if no joy there, check on your .NET framework as per the following document:
iTunes for Windows: "Error 7" message when opening iTunes

I installed the latest security update now my Lacie external drive won't show up in finder. Any Help?

I installed the latest security update now my Lacie external drive won't show up in finder. Any Help?

Does it show up in Disk Utility?
See mount section in 1st linked article.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

My BBZ10 won't turn on after battery died? Help?

My BBZ10 won't turn on after battery died? Help?

reebok6453, let's bring life back to that device! Connect that device to your charger for at least 30 minutes and then press/hold the power button down. Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport

Apple mobile device USB Driver won't install (Code 37) on my 7th Generation iPod Nano

As a result, iTunes won't detect my iPod. But the iPod will charge when I plug it in to my comp, and there is an iPod folder in "My Computer". But after installing iTunes, it no longer says “connected” on the iPod (even though it still charges it). And, in Device manager, there is a yellow exclamation mark that appears in the DVD/CD-ROM drive directly after installing iTunes – there is also a yellow mark next to “Apple mobile device USB Driver” when my iPod is plugged in. For both, it says “Code 37.” I know how to fix the DVD/CD-ROM drive problem (by deleting the filters) but the Apple driver still won't install after that. I've tried troubling shooting this. I uninstalled and reinstalled the drivers, but it hasn't made a difference. And I've uninstalled and reinstalled iTunes multiple times, too, and every time I reinstall iTunes the same thing happens: my iPod no longer says “connected on the screen,” and the DVD/CD-ROM drive gets code 37 again. Also, I tried different USB cables/ports.
Any help of suggestions would be greatly appreciated. And I think I've already read a lot of troubleshooting guides on this site, but haven't had any success so far.

Sorry, I'm confused. What do you mean by “leaving all other USB devices disconnected”? Does that include my mouse, keyboard, etc? And does that mean I uninstall those things in the device manager?

Itunes won't install correctly in PC...Apple Mobile Device Service failed to start

I have recently been getting messages that ITunes was installed incorrectly. I've followed all the recommend procedures and it still does not work. I'm also getting a message that the Apple Mobile Device Service failed to start. Also, when I plug in my Iphone to the computer, it downloaded the correct device driver but failed to recognize the Iphone so that I cannot transfer my photos to the PC. Do you have any advice?

The error message I'm getting is #7, Windows #193. I have 64bit.

Apple Mobile Device Support won't install, keeps rolling back..

I'm using Windows 7 64bit and i have everything updated. Since I've upgraded my iTunes to version 10.1, I can't sync my iPod Touch with it anymore.
Each time I plug my iPod in,
- the iPod could be detected by windows but not iTunes, and I keep getting the same error message " "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64bit version of iTunes""
- my iPod shows up as "Apple Mobile Device USB Driver" in devices and printers
After searching through the internet, I've tried many fixes but none of them worked. I've tried,
- downloading the latest iTunes and uninstalling it and reinstalling it again and again
- uninstalling step by step and completely removed everything as guided by this website (http://support.apple.com/kb/HT1923)
- extracting the AMDS MSI file from the iTunes64setup and run it separately
- copying the registry files and the whole Apple Mobile Device Support folder from a Vista machine as recommended in some websites
- creating a new user account with admin rights and reinstalling iTunes again after completely removing everything
I've read a post (http://discussions.info.apple.com/thread.jspa?threadID=2531860) in which the user encounters a similar problem as well, and apparently the user solved this problem by replacing the files in C:\Windows\System32\DriverStore\FileRepository\netaapl64.infamd64_neutral26aa9fb28983e9b5
C:\Windows\System32\DriverStore\FileRepository\usbaapl64.infamd64_neutral36363f69e6e22c1b
with files he had extracted from the CAB files within the AMDS MSI installer from the iTunes64Setup download.
But the problem is, whenever I try to extract the netaap164 and usbaap164 files from the AMDS MSI installer, using WinRAR, it says that the archive is corrupted and thus I won't be able to extract these files out.
Can anyone give me any suggestions or teach me what to do? I'm really stucked and lost now. Thanks in advance. =)

After a couple days searching the internet for a solution I pieced togetherwhat my problem was from several forums and fixed it; maybe my solution/problemis similar to all of yours. (NOTE: I’m running Windows XP Professional, 32-bit,with Service Pack 3 – so you’ll have to translate my issue into your Windows 7format because I have no idea how to operate things is that version of Windows.)
I traced the error to the Apple Mobile Device USB Driver under"Universal Serial Bus Controllers" as others have too (everything inthe iTunes installation would install perfectly well except for Apple MobileDevice Support). However, my problem wasn't with the driver itself -- I had amissing .dll file on my computer for the Hardware Update Wizard (whenever Iwould 'right click’ any USB driver and select "Update", HardwareUpdate Wizard would not open; nothing would happen).
So, I went searching for this problem next, and I found this website: http://kf.livejournal.com/208963.html?view=2699587#t2699587
The page suggests that the problem is a missing .dll file called “newdev.dll”that should be located in “C:\WINDOWS\system32\” (again, I don’t know theequivalent folder for Windows 7, so someone else will need to find out where “newdev.dll”belongs) – I did a search of the .dll file on my computer and found it missing.However, I found another copy of it on my computer using “Seach Everything” (foundhere: http://download.cnet.com/Everything/3000-2379_4-10890746.html)– but, you can also use the Windows Search tool. There were copies located in “C:\Windows\system32\dllcache”and “C:\Windows\ServicePackFiles\i386”. (I would suggest searching for itrather than locating it manually in Explorer in case its in a hidden folder.)
I copied one of the preexisting files of “newdev.dll” and pasted it into “C:\WINDOWS\system32\”.Then I tried re-installing Apple Mobile Device Support and it worked (norolling back installation). When I plugged my iPhone back into my USB “AppleMobile Device USB Driver” reappeared under “Universal Serial Bus controllers”in “Computer Management” – all I had to do was “Enable” it again and I hadaccess to my iPhone in iTunes again.
Also, I had copied a preexisting file of AppleMobileDeviceSupport.msi to mydesktop prior to uninstalling everything, so when I tried to reinstall iTunesand Apple Mobile Device Support failed to install all I had to do later when Ifound the solution was reinstall AMDS. If you do not have a copy of “AppleMobileDeviceSupport.msi”try completely uninstalling everything (like so many other forums suggest, asdoes Apple, here: http://support.apple.com/kb/HT1925),and reinstall iTunes with the Hardware Update Wizard .dll file replaced. (I can’tsay if this entire reinstallation will work since I only had to install AMDS.)
Hope my problem was your problem as well.

Optical drive won't install programs from CDs

I have a S300-EZ2501. I downgraded my installation from Vista Business to XP Pro.
My drive has stopped installing programs that come on CDs. I did not have this problem while loading all my software onto the laptop. Now, however, when I insert an installation CD into the drive, it attempts to read the CD, but cannot initialize the Autorun file, so nothing happens. I've tried running the install from the Run line, or by browsing to the file, but that does not work either. I also tried deleting the device from my system and reinstalling; that didn't work either.
Are there any registry settings for the optical drive that I can check? I want to make sure that the system is pointing to the correct location.
Thank you.
Barry L. Lippitt

I tried to restore to earlier settings, but that did not help.
If I try to doubleclick on the executable file on the CD, the hard drive light goes on, but not the external drive light.
I'm starting to think this is a WindowsXP problem and not a drive problem. I copied the contents of one of the program CDs to my hard drive, and tried installing from that directory. When I double-click on the Setup.exe file, there is sporadic hard drive flashing light, but nothing happens. The programs install from .exe files and not .msi files, so its not a Windows Installer problem. What other settings can I check that affect running setup programs on the laptop?
As I'm typing this, all of a sudden the executable program screen appeared on the laptop (after about 10 minutes). Maybe it will install, but that's a very long time before it happens.
Nothing more happened (10 more minutes). When I closed the screens fromy my toolbar, I received a popup telling me that I am ending the "nonresponsive program 32-bit Setup Launcher." I think there is a problem with this file; when I tried to install other programs (16-bit, from earlier versions) and had to close them down, I received messages that the 16-bit system was unstable.
Is there a way to repair these files on my laptop? What might have destabilized them?
As a reminder back to the beginning of this thread, my laptop came with Vista Business installed, but I downgraded from the restore CD to WinXP Pro.

Device Drive won't install correctly after 10.5 Upgrade-HELP!!!

Similar Messages

Maybe you are looking for