"Device Error" Code:3, Note: AS_Storage Error=-97060

After installing my new internal blue-ray drive (MCE Technologies) into my Mac Pro Tower, I attempted to burn my first Blue-ray and this error popped up. Not sure why. Can anyone help me? Thanks!

I think that instruction is for windows. And I am never clear on the Mac equivalent.
See this troubleshooting list, the step titled "Run the application in a minimized mode or from an administrator account":
Troubleshoot system errors, freezes | Mac OS 10.x | Adobe software
Many Mac errors are permissions based.
Try building to a folder to eliminate the burner as a cause.

Similar Messages

  • Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060

    I just wasted 2 Blu-Ray discs trying to burn a project. I was trying to burn a very simple project: a two-chapter Blu-Ray with two 55 minute episodes of a TV show on it.  I have used the exact same computer recently to do exactly the same job with success, so I don't know what the problem is.
    There are no menus in the project: it's just a bare-bones auto play disc with stereo sound only.  The disc shows 24.37 GB used on a single-layer BD.
    The files are conformed and as the build begins, the following error pops up:
    Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060
    System info:
    Windows 7 Professional
    Service Pack 1
    Intel i7 8 cores @ 2.80 GHz
    12 GB 1600 RAM
    AMD Radeon HD5870
    WD 3TB HD 7200 RPM NTSC file system
    Pioneer BD-RW BDR-206 ATA burnerncore
    Adobe Encore CS6

    I do not see another example of this error with the "97060" in it.
    I never trust my recollection of this, but note that the 24.37 GB may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get a different error, but who knows.
    I would try building to a folder to see if that succeeds. Then you can return to the issue of burning. Many of us prefer ImgBurn for burning rather than Encore.

  • Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064

    Hello,
    I am becoming increasingly frustrated with Encore as it now seems that I cannot burn a bluray to a disc. I would love to be able to talk to someone in support at Adobe but that does't seem to be an option. I have attempted to burn a video that is 18.45GB (transcoded) to a 25GB BD-R disc with the following error received on both attempts:
    "Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064"
    I don't understand this error because there should be plenty of room on the disc? I also had an issue a few weeks ago with Encore preventing me from burning a 20.4GB transcoded movie onto a 25GB disc. This may be unrelated and I am aware of the issues in Encore regarding the calculation of file size, but why am I now experiencing issues all the sudden?
    My configuration:
    Mid-2012 MacPro
    OSx 10.8.5
    Adobe Creative Suite CS5.5 (Encore CS5.1)
    Internal MCE Technologies Blu-ray burner
    I appreciate any help and support!!

    The Code 3 AS_StorageError comes in many variations.
    Google: encore "AS_StorageError=-97060" and you'll find a bunch issues. Now replace the 97060 with your specific code (97064) and you'll see there are no finds other than your thread.
    These all appear to have physical storage, hard drive, or media issues. Keep in mind that for Blu-ray especially, Encore uses a huge amount of temporary storage.

  • Adobe CS5 error Build .iso - Blu-ray Error: "device error", Code: "3", Note: "File can not o

    Hi am trying to create a bluray image .iso i loaded the gritty submenu and modified it and am getting this error
    and when i try to build it it giving me this error
    Blu-ray Error: "device error", Code: "3", Note: "File can not open.(/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/Gritty Noir Submenu HD_mm_1.m2v.00_00_00_1.1.1_UTC.ves) -
    Anybody encountered this problem? Thanks I appreciate it.

    Hi,
    Remove the all the files from
    /Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
    This will resolve this issue.
    This happens if any file corrupted in Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/ folder
    Thanks,
    Pankaj Gauba

  • Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File.

    I keep getting this error message about 11gb into burning a 22gb Blu-ray. "Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File." I have tried just about everything from running as administrator, starting a new project and changing the disc too. I am using CS6 and going crazy... any ideas?

    Hi,
    First try to create Bly Ray Image Under option 'Output" Select BluRay Image, and also select the destination to create Image and click on Build, It will create a BluRay Image with extension of .iso. Now to burn BluRay Disc, you need to Select BluRay Disc under 'Output' Option and Below under 'Source' Option select BluRay Image instead of current project and Select the destination where you have put .iso Image, Then click on Build and it will burn BluRay disc.
    In simple , First create an Image then Burn that image to BluRay .
    I hope, it will help you.
    Thanks

  • Blu-Ray "device error"code 3 note

    Im getting this error on almost every progect I do I
    Remove the all the files from
    /Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
    And sometimes this works this time it is not.Ive been searching the web on this and its been going on since CS3
    1.How do I get this to work?
    2.Why has this error been going on for so long (3 versions) ?
    IM using Encore CS5 Mac Pro
    Thanks
    This photo is from a different post that had the same issue

    The Error code 3 comes mainly in two scenarios:
    1. When the AuthorScriptHDMVSessions files gets corrupted and
    2. When either your Blu ray disc or the burner is damaged.
    This device error is most probabily because of your damaged disc.
    Try using new BD.
    Best of luck.
    Thanks,
    Ramesh.

  • Mass storage device and portable device ERROR code 31 41 HP PAVILION s5123w Desktop PC

    I am using windows vista home premium 32 bit First time I pluged nikon camera into computer. Says installing device driver software but it does not install. Device manger under portable device digital still camera yellow question mark error code 31 under mass storage device error code 41. The device driver loads and installs on my daughters Laptop so ther is some thing wrong with my PC Every time I reboot computer  windows need to intall driver software for your Microsoft WPD file system volume driver. Loacate and install driver software recomended says installing driver says successfully installed. I have to click Safely remove hardware usb mass stoage device multi flash reader usb device generic volume f  I click stop says safe to remove I do not have a reader plugged in my computer. this happens every time I reboot> If you don't understand what I am talking about Let me know.
    thanks Scott

    Hey poochokid,
    I'm sorry you're running into this issue. For the camera, if it's newer (made in the last 3 or 4 years) you may need to go to the Nikon website and find the camera software that is made for Vista. I could try to help you find that, if you could give me the model of camera you have. 
    For the Microsoft WPD file system volume driver issue take a look at this thread from another forum. 
    I hope this information helps! Let me know what the results are

  • Device Error - Sense Code(5 26 00)??

    Hi everyone..
    Another problem with PrE8.01.  I am arriving at this error code: "Device Error - Sense Code (5 26 00) - Invalid Field in Parameter List - General" after the encoding and compiling media stage of burning to disk.  I have a pioneer dvd/bluray burner (new) that has been working before (not with PrE8).  Any suggestion please?
    Ben

    I've asked some questions and made some recommendations in your other thread so I won't repeat them here.
    For your burning problem:
    Check for a firmware update for your drive. As you described the machine as new it could well be out of date.
    What brand of media are you trying to burn to?
    For a DVD use the 'Burn to Folder' option. Does this complete?
    Play the video (from step 3) in a software DVD player (VLC is good and free if you don't have one). Does this play OK?
    Burn the folder to a DVD using a stand-a-lone burning tool (ImgBurn is good and free if you don't have one). Make sure you burn no higher than x4 speed. Does the burn complete? Does it play on a DVD player connected to a TV?
    Post back with your answers please.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Error Message "Device Error - Sense Code (6 28 00)"

    Trying to burn a project made up of MP4 video files (about 2 1/2 hrs in length) and when it reaches about 97%, I receive this message "Device Error - Sense Code (6 28 00) - Not ready to ready change, Medium" and then Premiere elements 9 procedes to burn a perfect DVD with menus and all.  Any ideas?

    SenseCode errors are most often caused by hardware issues with a multi-drive (burner), and can be from perhaps old firmware in the multi-drive, or connection issues on the system, between the multi-drive and the OS. I would first check for firmware updates from the multi-drive's mfgr's. Web site. Be sure to read the instructions for "flashing" the ROM with firmware updates - VERY IMPORTANT - follow those instructions to the letter!
    They can also be caused by blank media issues, such as bad blank media, non-RW media, that has been used already, or RW media, that was not erased.
    What brand, and type of blank media are you using?
    Good luck,
    Hunt

  • Device Error - Sense Code

    I have tried to burn a DVD using Premier 2.0. Once I got a message - Device Error - Sense Code (04 91 C0) the second time I got the same message but a different Code - (04 92 05). A Third time I got an "Unknown Error" message.
    After the first error, I saved it as an AVI, imported it into a new project, fixed the tail end - which had black frames on it, and am burning from that project.
    I have saved the file to a folder and tried to copy it using Magic DVD Writer, and get an error message there, too.
    When I play the DVD using Nero, it looks fine.
    I am using an AOpen writer. Do you suppose it is the burner - or something else?
    The thing is that 2 weeks ago, I burned one and it flew through. Prior to that I couldn't get 2 others to burn, and I ended up saving them to folders on an external hard drive and taking them to someone else to burn the master DVDs. The final movies are great!
    Thanks,
    Penny

    Penny,
    Usually "Sense Code" errors reflect a problem with the burner and the process.
    This can be:
    1.) burner is bad or improperly connected
    2.) burner is "in use" by another application, like a packet-writing module from Nero or Roxio, or even the OS itself
    3.) media is not the correct type, has been used or is bad
    Let's check these in order.
    1.) does this burner function properly in any other application? If so, we can *probably* eliminate #1
    2.) do you have Nero, Roxio or does your OS have a packet-writing (drag-n-drop) application? If so, this is *probably* the cause. If not go down to the next level. Adobe authoring apps need 100% control of the burner. If you must keep the packet-writing app, then look into the free ImgBurn program to actually do your burns.
    3.) what brand of media are you using and what type is it? Have you used this brand and type before? If so, could this particular disc have already been written to, even if it was an aborted burn? I use Taiyo Yuden, or Verbatim blank DVDs, and none has ever failed to burn, or to play in a client's player. Note: some brands, like Memorex might actually contain several different producer's media, marked with their name - part of a spindle can be perfect and the rest bad. Ritek used to have a good rep, but lately they have been causing as many problems as Memorex and "bargain brands." Always use the best media you can possibly afford, and burn at the slowest speed, if your burning app allows you to reduce the burn speed.
    Chances are that the cause is one of the above. If you go though all three of these and are still having problems, let us know the answers to the questions posed in the solutions area.
    Good luck,
    Hunt
    [Edit] John types much more quickly, than I do!

  • Blu-ray error device error code "3" create sequence fail to write m25 file

    Continue to get this error message when outputting to blu-ray, can burn to dvd just fine. It seems I have experienced this issue in the past but don't recall how I resolved.
    tried re-saving to new file name.

    I found 3 other discussions... one of them may help
    Re: Blue ray Error -  "Device not ready", Code:"3", Notes -   Any ideas what this means?
    Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064
    Blu-ray Error: "divide error", Code: "3", Note: "AS_StorageError = -97060

  • Code 3 Device Error buring Blu-Ray

    Hello,
    I am having an issue with buring a Blu-Ray.  I am getting this error
    Blu-ray Error: "device error"' Code: "3" nOTE: "cREATEsTCsEQUENCE: fAIL TO WRITE m2s FILE
    Can someone help?  This problem has already cost me $10.

    http://forums.adobe.com/message/5522091#5522091
    Test the workflow up to the point of actually burning a disk by a) building to an image and b) burning with an alternate software such as ImgBurn for PC or Toast for Mac.
    I do not think there was a solution for users getting this problem in CS6.

  • Blue-ray Error: "device error", Code: "3"?

    Does anyone know how to resolve a Blue-ray Error: "device error", Code: "3"?

    I don't think we know a  single solution.
    See this thread:
    http://forums.adobe.com/message/4328748#4328748
    The link I refer to in post 1 (that refers to removing previous authorscriptsessions) is not relevant to CS6 - where they appear to automatically remove the old sessions.

  • Error FF753 Tax code 01 not appear in any G/L account item with FM Active

    Hi
    We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are  getting the Error FF753 Tax code 01 not appear in any G/L account item.
    This error however does not appear when posting directly from FI with the same tax code.
    I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
    Please advise.
    Regards
    Sandeep

    Hi:
              If you could please refer to the contents of  OSS Note 112609 - How are tax codes transferred to conditions ?
    "Symptom
    If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
    Other terms
    FF805, FF747, FF753, MWSKZ, MWSK1, tax code
    Reason and Prerequisites
    The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
    Solution
    In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
    Basically:
    The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
        1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
        2. The tax code is transferred into all conditions, for which
        the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
        the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
        the condition is not statistical (if it is no invoice list condition),
        the condition is no tax condition.
    After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
    Special features:
        1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
        the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
        the condition is not statistical (if it is no invoice list condition).
        the condition is not a tax condition.
        2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
    Notes:
        1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
        2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
        3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
        4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
    Regards

  • Error while MIRO posting: Unique co code has not been assigned to co number

    Hi all
    I am getting the following error while posting MIRO-
    "A unique co code has not been assigned to co no". I think this might have to do something with CO no range. Is it so. Does any1 have any idea what this could be because of?
    Thxs in advance
    Hrishi

    Hi Vishnu
    Thxs for ur immediate reply. But cross co conttrolling is not active in my case. The error diagnosis reads as follows-
    Doc breakdown is active in ur system. In certain cases, a co code is derieved frm the Co ID no and this must lead to the assignment of a unique co code.
    A unique co code could not be assigned to Co no.
    Message No GLT0001

Maybe you are looking for