Device error detected

When I try to find out what is a problem with my printer, I get the message Device error detected. I  cannot find out how to correct it. There are no suggestions as to how to correct this. 

Hello g-1zmine, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing device errors.  I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, are these errors appearing on the printer or the computer?
Please let me know what you find.  Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • Device not detected My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in  Micro soft tech net.

    Device not detected
    My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in  Micro soft tech net. Still the problem has not been solved

    Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
    Sorry for the multiple posts

  • Getting I/O Device error when trying to build?

    Hi...
    I'm pretty much a horrible noob when it comes to stuff like this. I'm using Ant to build an EAR for deployment to an environment. I've been doing it for a while, totally fine... but when I tried to do it today - I'm getting the following error:
    Problem creating war: the request could not be performed because of an I/O device error
    Now, I have no idea what this means - Google isn't being a lot of help either. Is this a memory issue? Is it something corrupt in my local Javan environment?
    It happens when I try to do the build via command line and through Eclipse.
    The process is able to make it through the regular build portion fine - it just chokes on building the WAR.
    Anyone?

    Grrr... checking out Event Viewer after this most
    recent restart and I'm seeing a bunch of errors:
    The driver detected a controller error on
    \Device\Harddisk0
    Eeep.
    Sounds like it might have something to do with it,
    right? Yes.
    There are a ton of those and then a ton more
    of these:
    Logical drive 1, configured on Array Controller
    [Embedded] returned a fatal error on a read/write
    request on the volume.
    Logical block address... &c...
    Does this mean a drive has failed on the box? Or just
    some controller associated with a drive?Don't know and couldn't say. Either way it's bad. Find an administrator and ask them. Hopefully you have one.

  • Broadcom bluetooth drives installation failed, no bluetooth device was detected.

     hello, i have HP Pavilion dm4-3013cl Entertainment Notebook PC laptop.and i am trying to install BROADCOM BLUETOOTH DRIVERS in my laptop and i am getting this error that no bluetooth device was detected. please make sure that your bluetooth device is plugged in properly in order to countinue installation. now i want to say that i lost my recovery disc and after while for heating issue my main hard disk break or not working condition so i just replace hard disk and ofcourse i dont have os so i install fress windows 7 ultimate 64bit in my laptop. and install each drivers provide by HP website i downloaded all drives and installed and my windows 7 is also up to date. i search for this issue allmost one week for solution but cabt fix and i come to know that before insalltion of BROADCOM BLUETOOTH DRIVERS i have to enable bluetooth in HP WIRELESS ASSISTANCE but in my case i think i cant find due to new disk and new os. i can send file or recieve with bluetooth can paired with my all smartphones too but cant listen music in head phones. cant access LISTEN TO MUSIC, i know the reason is only this drivers is not installing properlly and i want to fix it. now i a tired and i dont have time to search and fix it so please help me out from this issue please and sorry for my poor grammer.

    fixed !!!                now i come to know, the problem is drives which i update it from intel websites, paul you suggest me correct driver for my bluetooth but it is allready in my laptop which i updated before but again i download and install and nothing happen then i reformate laptop and again install all drivers which i downloaded from hp website for my laptop and again update all drivers manually and automaticallu both from intel website and intel utility drivers software and update windows too and i got same problem. cant hear music from bluettoth head phone, so again i reformate laptop but this time i just installed drivers which listed from hp website, i didnt update anything and as you said i didnt install broadcom bluetooth drivers because it is not for my laptop so then i connect my blutooth and try to access listen to music and o m g. it works now i can hear nusic form bluetooth, i dont believe this. but yes it works this forum help other also so thanks paul and have a nice day now i newer going to update my drivers...  in pic you can understand that i am not using latest version of bluetooth drivers.

  • Cat c6509 E with Supervisor vs-s720-10g reload and Cache error detected!

    Can you help me Cat c6509-E reload 
    connect console  I see :
    Initializing ATA monitor library...
    Self extracting the image... [OK]
    Self decompressing the image : ############################# [OK]
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASEK9-M), Version 12.2(33)SXI1, RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2009 by Cisco Systems, Inc.
    Compiled Sat 28-Mar-09 10:48 by prod_rel_team
    Image text-base: 0x40101328, data-base: 0x421FFA10
    Cache error detected!
      CPO_ECC     (reg 26/0): 0x000000B6
      CPO_CACHERI (reg 27/0): 0x84000000
      CP0_CAUSE   (reg 13/0): 0x00004800
    Real cache error detected.  System will be halted.
    Error: Primary data cache, fields: , 1st dword
    Actual physical addr 0x00000000,
    virtual address is imprecise.
     Imprecise Data Parity Error
     Imprecise Data Parity Error
     22:12:30 UTC Tue Mar 24 2015: Interrupt exception, CPU signal 20, PC = 0x413EB310
       Possible software fault. Upon reccurence, please collect
       crashinfo, "show tech" and contact Cisco Technical Support.
    -Traceback= 414EDA90 
    $0 : 00000000, AT : 42510000, v0 : 00000000, v1 : 00000001
    a0 : 43757CC4, a1 : 00040110, a2 : 45762ECE, a3 : 00000000
    t0 : 44997CF0, t1 : 00000000, t2 : D5303A40, t3 : 00003A40
    t4 : 0000004F, t5 : 0000005F, t6 : 68C8F600, t7 : 00000000
    s0 : BEDA4010, s1 : 00000000, s2 : 00000000, s3 : 44086D60
    s4 : 45762ECC, s5 : 00000001, s6 : 00000080, s7 : 44080000
    t8 : 45762ECC, t9 : 00000000, k0 : 841E6970, k1 : 02951800
    gp : 4250FC60, sp : 44997D48, s8 : 4499848E, ra : 413EB310
    EPC  : 414EDA90, ErrorEPC : 413EB310, SREG     : 3400F105
    MDLO : 00159DC0, MDHI     : 00000000, BadVaddr : 00000000
    DATA_START : 0x421FFA10
    Cause 00004800 (Code 0x0): Interrupt exception
    File bootflash:crashinfo_20150324-221230 Device Error :No such device
    %Software-forced reload
     22:12:30 UTC Tue Mar 24 2015: Breakpoint exception, CPU signal 23, PC = 0x4171F5E0
       Possible software fault. Upon reccurence, please collect
       crashinfo, "show tech" and contact Cisco Technical Support.
    -Traceback= 4171F5E0 4171D184 40F4F26C 40F4F450 40F4F670 4171282C 
    $0 : 00000000, AT : 42510000, v0 : 441D0000, v1 : 424C0000
    a0 : 00000000, a1 : 00008100, a2 : 00000000, a3 : 00000000
    t0 : 0000FF00, t1 : 3401FF01, t2 : 41712918, t3 : FFFF00FF
    t4 : 41712918, t5 : 73206265, t6 : 65746563, t7 : 20546865
    s0 : 00000000, s1 : 424C0000, s2 : 00000000, s3 : 08000000
    s4 : 42380000, s5 : 42380000, s6 : 41D90000, s7 : 00000001
    t8 : 506D5CC4, t9 : 00000000, k0 : 00000000, k1 : 00000000
    gp : 4250FC60, sp : 50012420, s8 : 41D90000, ra : 4171D184
    EPC  : 4171F5E0, ErrorEPC : 413EB310, SREG     : 3401FF03
    MDLO : 00000000, MDHI     : 00000003, BadVaddr : 00000000
    DATA_START : 0x421FFA10
    Cause 00000024 (Code 0x9): Breakpoint exception
    === Flushing messages (22:12:30 UTC Tue Mar 24 2015) ===
    Buffered messages:
    Queued messages:
    *Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
    Firmware compiled 19-Feb-09 20:18 by weizhan Build [100]
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Error address Lo=0x4010
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Error address Hi=0x1EDA
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Interrupt Hi reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: Interrupt lo reg=0x8000000
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-DUMP: System controller Global Registers Dump
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: global hazard reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: soft reset cfg reg=0x10FFFF
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: global cfg reg=0x20
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: init status reg=0x8
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl cfg reg=0xE
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: prio map cfg reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ecc error log reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: parity error log reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: jtag idcode reg=0x5013102F
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: work status reg hi=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: work status reg lo=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc rxstat reg=0x11FE
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc txstat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: eobc mac cfg reg=0xE24
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: inbound rxstat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: inbound txstat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: io int stat reg=0x408
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: pcmcia cfg reg=0x1A0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: pcmcia stat reg=0x3C
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: bist go stat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: bist done stat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 0=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 1=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: ibl debug reg 2=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: obl debug reg 0=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: obl debug reg 1=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: rxq debug reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: txq debug reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: gigmac cfg reg=0x1001
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-INFO1: gigmac stat reg=0x0
    *Mar 24 22:12:30.667: %SYSTEM_CONTROLLER-3-FATAL: An unrecoverable error has been detected. The system is being reset.
    *Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
    *Mar 24 22:12:30.695: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
    *Mar 24 22:12:30.695: %OIR-6-CONSOLE: Changing console ownership to switch processor
    *** System received a Cache Parity Exception ***
    signal= 0x14, code= 0x84000000, context= 0x441ce024
    PC = 0x4171295c, Cause = 0x820, Status Reg = 0x34018002
    System Bootstrap, Version 8.5(3)
    Copyright (c) 1994-2008 by cisco Systems, Inc.
    Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory
    Autoboot: failed, BOOT string is empty
    Autoboot executing command: "boot "

    Hello Abubaker,
    It crashed due to a parity error.
     Imprecise Data Parity Error
     Imprecise Data Parity Error
    Which in other words means, a temporary error in memory. On single occurence adivice is to monitor the supervisor for re-occurence of such failure again. You can monitor it for 24 - 48 hours and if its a hard failure , the likelyhood of issue coming again is more and you need to replace supervisor. If it does not repeat you can consider this as a one time issue and contnue using it. 
    Hope this helps and please always rate useful posts.
    Thanks,
    Madhu

  • %PM-4-ERR_DISABLE: loopback error detected on Gi0/2

    Dear Sir,
    I have config. new cisco 2960 se Swtich on our LAN that is connected with another cisco switch with trunk with crass cable.
    backbone link is down frequtly since i have installed it on network follwing Eror has shown in log
    May 20 15:03:17.223 India: %ETHCNTR-3-LOOP_BACK_DETECTED: Loop-back detected on
    GigabitEthernet0/2.
    May 20 15:03:17.223 India: %PM-4-ERR_DISABLE: loopback error detected on Gi0/2,
    putting Gi0/2 in err-disable state
    May 20 15:03:18.229 India: %LINEPROTO-5-UPDOWN: Line protocol on Interface Gigab
    itEthernet0/2, changed state to down
    Can any body tell me whts prob.
    and one more prob..
    follwing cmd is automatically configured on new switch
    crypto pki trustpoint TP-self-signed-1076337536
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-1076337536
    revocation-check none
    rsakeypair TP-self-signed-1076337536
    crypto pki certificate chain TP-self-signed-1076337536
    certificate self-signed 01
      3082023F 308201A8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
      31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
      69666963 6174652D 31303736 33333735 3336301E 170D3933 30333031 30303030
      35305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
      4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 30373633
      33373533 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
      8100AEE1 20B64C5B 4F831F44 AE90A8B7 5C60D1B1 4662B4B3 36865A3E 43F974F1
      9DA7521E 692A4F13 4F447483 868A0448 322006CA AA404B31 5ED05776 76BCC3A0
      0C15BF47 2176F5AC EAFB06E4 D8F49BB1 0A999AAE F3922648 63447BEC D31E1359
      4F8565C6 1CF5A066 7F9D43F3 F8E5FA3B 380AF1CB F5E630D5 53A921E2 E62A3560
      176B0203 010001A3 67306530 0F060355 1D130101 FF040530 030101FF 30120603
      551D1104 0B300982 07535732 5F47462E 301F0603 551D2304 18301680 145041F9
      C03F664F A1090118 0837DC12 90761ED4 F6301D06 03551D0E 04160414 5041F9C0
      3F664FA1 09011808 37DC1290 761ED4F6 300D0609 2A864886 F70D0101 04050003
      81810018 76970781 17981390 979FBA1E 9CA904AF 5050BAF1 5F2EE233 FACF7C69
      F57CE8F2 B1EF224F 126A3EB9 5A797456 00C11FA8 86E43C25 D74C0EB2 AF8A5EE7
      D45F14E7 C75FCA25 14250CFB A28507A1 66617E60 761A4F68 F1E9DD15 29B3D6FE
      32AC4BBE 887687CE 890D67F5 2BE050F8 CAAC237A 50177347 DB3E2C16 65FD0AEE 66490A
      quit
    wht is this?????????????? and how do i remove it......
    Thanks in adv...
    Tom

    Hi Tom
           Following is taken from a Cisco document and you might find this useful.
         A loopback error occurs when the keepalive packet is looped back to the port that sent the keepalive.
         The switch sends keepalives out all the interfaces by default. A device can loop the packets back to the source interface, which usually occurs because there is a logical loop in the network that the spanning tree has not blocked. The source interface receives the keepalive packet that it sent out, and the switch disables the interface (errdisable). This message occurs because the keepalive packet is looped back to the port that sent the keepalive:
    %PM-4-ERR_DISABLE: loopback error detected on Gi4/1, putting Gi4/1 in
    err-disable state
            Keepalives are sent on all interfaces by default in Cisco IOS Software Release 12.1EA-based software.
             In Cisco IOS Software Release 12.2SE-based software and later, keepalives are not sent by default on fiber and uplink interfaces.
             The suggested workaround is to disable keepalives and upgrade to Cisco IOS Software Release 12.2SE or later.
           Reference : http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml
    Hope this helps
    Happy Networking!!!!
    Regards
    Narendrakumar B

  • Hp pavilion dv2910us No Bluetooth Device was detected.........

    Hello........
    My Hp pavilion dv2910us
    after install windoas 7 when i try to install my bluetooth driver its say
    No Bluetooth device was detected.............
    i try SP38167 And SP46038 but same error ..............
    what to do............. is it driver problem and device problem......?????
    Thanks
    manoranjan
    waiting for great reply

    Hi
    Please press the Fn & Esc Button you will find the details of what i have asked you i needs the complete model number & Product number so i can check if the Bluetooth cam integrated on your unit.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Audio device not detected in control panels

    +Audio device not detected in control panelsa I've been using my X-Fi Platinum with Windows 7 64-bit fine for around a month now. Recently I encountered a problem where I couldn't record any sound including talking on Teamspeak. I decided to reinstall the drivers, so I cleaned them out with a driver cleaner tool, and reinstalled. Everything works fine again, but none of the applications will work anymore. They all give an error message about not being able to detect the device. This includes AutoUpdate, Creative Audio Control Panel, and Creative Console Launcher. The card appears to be working correctly everywhere else: Device manager, teamspeak works fine now, windows recorder, guitar rig (guitar amp emulator), dx diag, all working well.
    I also tried installing Daniel_K's driver pack to no avail.
    Any ideas?
    Thanks,
    Glorfindel

    /Hi Glorfindel,
    Did?you?reinstall the applications from the installation cd?
    Download and install the latest applications from our support site to see if it helps, click on the link and select your product. Note that some of the applications are not available on Windows 7.

  • Hi,why I have a "DMA hardware error detected" when I try to save file as *.htm for remote front panel application?

    Hi,
    I try to learn how to present my data anywhere by using labview remote front panels. I use PCI-mio-16E-4 device to acquire data. After I start web server and try to save to as *.htm file, I got the "DMA hardware error detected" message. Can anyone help me to solve the problem. Thanks.

    What was the actual error code?
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Uncorrectable error detected by pci0... during DVMA read transaction

    hi people... at first, sorry for my english. I hava a Sun Fire 280R with Solaris 8 and today it boot aparently without a reason, it boot 5 or 6 times. The error before the fall is:
    WARNING: Uncorrectable error detected by pci0 (safari id 00000000.00000008) during DVMA read transaction
    panic[cpu0]/thread = 2a10001fd20: Fatal PCI UE Error
    syncing file systems... 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 done (not all i/o completed)
    dumping to /dev/dsk/c1t0d0s1, offset 429588480
    I can not make a backup and sometimes I can not logon because it cause the boot. I have reading something of this error and I have puting the machine in diagnostic mode:
    auto-boot? = false
    diag-device = disk
    diag-level = max
    diag-switch? = true
    After this, power-off and after this I have igniting the machine... I have almost one hour waiting and no notice... the screen continue black :-(
    Can somebody help me?
    THANKS! Ceci.

    Ceci,
    First off, <font color="firebrick">WRONG FORUM</font>.
    This forum is for discussions of the <u>Live Upgrade procedure</u> of installing Solaris.
    Period.
    Having said that...
    Diagnostic mode sends all console output to the TTYa port.
    You will never see the diag results on your monitor.
    Particularly for such a system as a 280R that was
    never intended to run with a graphics card and keyboard/mouse.
    Set up a TIP session and start the diag boot all over again.
    Capture all the output to a file
    You appear to have a hardware issue.
    We can only guess what the real root cause might be
    (third party adapter card? Solaris not patched?)
    You would get the best guidance and analysis if you open a service case with Sun techsupport.
    These forums are user-to-user discussions. This is NOT Sun techsupport.

  • Power Controller reports power Imax error detected

    Hi,
    My 3560 switch w/ IOS 12.2(35)SE have below message last night. Would anyone know what happen?
    Sep 23 18:54:58.468 UTC: %ILPOWER-7-DETECT: Interface Fa0/10: Power Device dete
    ted: IEEE PD
    Sep 23 18:54:58.468 UTC: %ILPOWER-5-INVALID_IEEE_CLASS: Interface Fa0/10: has d
    tected invalid IEEE class: 7 device. Power denied
    Sep 23 18:57:37.542 UTC: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error,
    Interface Fa0/12: Power Controller reports power Imax error detected
    Sep 23 18:57:44.580 UTC: %SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: cisco-phone no lon
    er detected on port Fa0/12, port set to untrusted.
    Sep 23 18:57:48.674 UTC: %ILPOWER-7-DETECT: Interface Fa0/12: Power Device deteted: Cisco PD
    Sep 23 18:57:48.741 UTC: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Fa0/12: Power Controller reports power Tstart error detected
    Thanks and Regards
    Ernest

    Hi Leo
    Thank you for your quick response but as I said before that Nortel IP phnoe has a designed fault in power module so it meant to fail and cisco switch generate syslog for this Power Controller reports power Imax error detected. Once we replace with new phone, the error disappear and works all fine.
    Now the solution I am looking for this issue as follows:
    While the faulty IP phone still pluged in and keep booting, the switch generate error log and our syslog server keep sending out email alert until one of our engineer log into switch and shut the port. Very often if this happen in weekend or at night then we get hundreds of email.
    Therfore I think it would be nice if Cisco 3750 put this swithport into errdisable state but it's not happening.
    This is the output of errdisable;
    #sh errdisable detect
    ErrDisable Reason            Detection    Mode
    arp-inspection               Enabled      port
    bpduguard                    Enabled      port
    channel-misconfig (STP)      Enabled      port
    community-limit              Enabled      port
    dhcp-rate-limit              Enabled      port
    dtp-flap                     Enabled      port
    gbic-invalid                 Enabled      port
    inline-power                 Enabled      port
    invalid-policy               Enabled      port
    l2ptguard                    Enabled      port
    link-flap                    Enabled      port
    loopback                     Enabled      port
    lsgroup                      Enabled      port
    mac-limit                    Enabled      port
    pagp-flap                    Enabled      port
    port-mode-failure            Enabled      port
    pppoe-ia-rate-limit          Enabled      port
    psecure-violation            Enabled      port/vlan
    security-violation           Enabled      port
    sfp-config-mismatch          Enabled      port
    small-frame                  Enabled      port
    storm-control                Enabled      port
    udld                         Enabled      port
    vmps                         Enabled      port
    ===========================================
    Another thing that this command "power inline port 2x-mode" is not available in our IOS, I am not sure how this command will help.
    Look forward for someone response.
    Thank you all.

  • %PM-4-ERR_DISABLE: loopback error detected

    ETHCNTR-3-LOOP_BACK_DETECTED: Keepalive packet loop-back detected on FastEthernet0/23.
    %PM-4-ERR_DISABLE: loopback error detected on Fa0/23, putting Fa0/23 in err-disable state
    Information:
    1. swith 3550(f0/23,trunk,up-SW) link to 3550(f0/23,trunk,down-sw)
    2. disable port is not used.
    3. port used(connect to cisco router,cisco switch,IPS,log server,ibm router,sniffer)
    4. IOS (C3550-I9Q3L2-M), Version 12.1(14)EA1a
    How to check where 's loopback port problem?

    Hi Friend,
    Also if changing the cable did not resolve the issue then there may be a STP loop in you network.
    The problem occurs because the keepalive packet is looped back to the port that sent the keepalive. Keepalives are sent on the Catalyst switches in order to prevent loops in the network. Keepalives are enabled by default on all interfaces. You see this problem on the device that detects and breaks the loop, but not on the device that causes the loop.
    Workaround will be to issue the "no keepalive" interface command in order to disable keepalives. A disablement of the keepalive prevents errdisablement of the interface, but it does not remove the loop.
    To remove the loop you may have to trace the cables and switches and find out that out.
    Regards,
    Ankur

  • Video device not detected

    I am new to using flash media live encoder, very little
    knowledge on how this works. I downloaded it today and plugged my
    JVC HD 110 with firewire and got the error message that no video
    device was detected when I opened the application. I also tried
    using my Sony Handycam connecting it with a USB and still nothing.
    I am running the encoder on the PC side of my Mac using Parallels.
    Any thoughts?

    The Mac thing may throw this for a loop, but try buying a
    Dazzle RCA to USB converter (yes, even if your camera already has
    USB-sometimes cameras does not have a setting to allow the video
    out in real time).
    Once you connect the Dazzle (they are at every computer store
    'Micro Center', etc.), it will be in the list to select, if it
    already isn't the systems selected choice-you will be able to
    select it. Now, if your video camera does not have RCA and it has
    the 1/8 inch or any other plug-you may be back to scratch (if you
    have the 1/8 inch-you can adapt that to RCA and continue from
    there).
    Good Luck!
    Happy Holidays,
    Dirty South TV

  • PS1 device error for 280R

    Hello all,
    I am inquiring about the following device error I have seen for a 280R.
    WARNING: Device PS1 failure detected
    by sensor PS1_FAULT_SENSOR
    Has anyone seen this and know if it will cause a problem?
    Thanks,
    David

    Hi i am also facing the same Problem
    8 10:37:55 indsun02 picld[133]: [ID 961923 daemon.error] WARNING: Device PS1 failure detected by sensor PS1_FAULT_SENSOR
    Jun 8 10:38:25 indsun02 picld[133]: [ID 449286 daemon.error] Device PS1 OK
    Jun 8 11:54:02 indsun02 picld[133]: [ID 961923 daemon.error] WARNING: Device PS1 failure detected by sensor PS1_FAULT_SENSOR
    Jun 8 11:54:32 indsun02 picld[133]: [ID 449286 daemon.error] Device PS1 OK
    Jun 8 15:32:18 indsun02 picld[133]: [ID 961923 daemon.error] WARNING: Device PS1 failure detected by sensor PS1_FAULT_SENSOR
    Jun 8 15:32:48 indsun02 picld[133]: [ID 449286 daemon.error] Device PS1 OK
    ~

  • DVD Burn problem. "Device error - the target device isn't suitable for use"

    Hello everyone,
    I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
    Just thought it was important to report success as well as failure!
    However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
    Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
    I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
    Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
    This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
    So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
    I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
    Justin.

    OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
    system meets minimum requirements
    Project size does not exceed disk capacity
    successfully burned project to DVD folder -thus skip to step 8.
      8.   Using new blank media for burning
      9.   Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
      10.  Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
      11.  Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
      12.  Disabled IMAPI CD burning COM
      13.  DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
      14.  Updated DVD firmware
      15.  Already updated nVidia drivers
      16.  Don't have any other DVD drives to disconnect.
      17.  MPEG workaround. Will resort to if required.
      18.  Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
      19.  Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
      20.  Visit forums to see if other have the same problem. Hi guys
    So still working through some of the items above.
    Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
    What a process.
    Stay tuned.
    Justin.

Maybe you are looking for

  • IMovie 6 FCE - odd error, plan B?

    Hello! Bear with me - i'm an old time pro at iMovie (1, 4, 5, and 6), and have just upgraded to FCE HD. As in, loaded it up 6 hours ago! So, why did I upgrade? I'm pushing the outer limits of iMovie - particuarly with titles, transitions, small video

  • Issue in loading master data in BI 7.0

    Hi, I fail to understand how to load master data in BI 7.0. Can you please fill in the steps. 1. Created an Infoarea. 2. Created 2 infoobject catalogs ( for char and kf) 3. Created characteristics like empname and month and salary as KF. 4. For empna

  • PSC 2175 not printing with Windows XP

    Hello, This printer has worked great since the first day with the setup below, but I cant figure this out. Setup Connection using USB O/S windows XP sp3 System is connect to ATEn KVM Switch USB. windows share with other  windows machines. Issue The p

  • BAdI: or User Exit  for Campaign Creation

    Hi all,           we are working in CRM 5.0, we have a Requirement like :       when we create the campaign it should check higher level project ID        (marketing Plan ID)       if it is there it should permit for create campaign else it ll show e

  • Wlan client multiple radio ssid display & selection

    assuming two ssids on both radios, such as dot11 radio0 ssid Private ssid Public dot11 radio1 ssid Private ssid Public does a given client--which is capable--automatically display/select the 5Ghz radio over the 2.4Ghz? Specifically, when the 5Ghz-cap