Device Error-target device not suitable for use at 96% DVD Burn, Anybody?

Hi There:
W7,i5 1.5TB New! I've MPEG & AVI converted the 10 hour edited timeline and seen the same error. I like the menus & trying to complete burn. Any suggestions? Thanks, Ben!

You're not really working with a 10-hour timeline, are you? You can only fit about 60-70 minutes of video on a standard DVD -- maybe twice that on a dual layer disc.
In any event, the best way to find out what's going wrong and when is to use the troubleshooting steps in the FAQs to the right of the forum.
http://forums.adobe.com/thread/415318?tstart=0
If you'll post the results for each step in as much detail as possible, we can help you figure out what's going wrong and how to fix it.
BTW, you're not combining MPEGs and AVIs in the same project, are you?
You definitely want to convert those MPEGs first to AVIs so that only DV-AVIs are going into a project and that project. It will certainly save you a lot of heartache (as well as having to deal with strange interlacing issues) later.

Similar Messages

When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state". What is this?

When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state". What is this?

See if this post by turingtest2 fixes it : key not valid for use in specified state

Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state

we have developed packages to do the followings
Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
While runing the package we are getting the following error message
Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
ilikemicrosoft

Hi Surendiran,
This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
under a different user account.
This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
sensitive information using creator's account name.
As a solution:
Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
OR
Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
OR
The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
back.
Hope this helps.
Please mark the post as answered if it answers your question

Can't download iTunes, error message "Key not valild for use in specified state"

I can't download iTunes, keep getting error message "Key not valid for use in specified state" I uninstalled and tried reinstalling but same issue.

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\<User>\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Consistent Error Message: Key not valid for use in specified state

For several years I have been trying to use iTunes. Without success, I decided to try to reinstall the program and now I am getting the above error message.

It seems we may have a more targeted solution. Based on posts in the thread key not valid for use in specified state I've just added the following to the user tip.
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

I am getting an error message "key not valid for use in specified state"

I am trying to install adobe photoshop elements 12 I just bought and when it says install I click the button and up pops " key not valid for use in specified state" any body know what to do.

Hi,
You can try to mov the contents of "C:\Users\%USERNAME%\AppData\Roaming\Microsoft\Crypto\RSA" to another location.
Try to run the installation again and check if it works.
Additional information:
ERROR: "key not valid for use in specified state" when updating to Lightroom 5.6 in Win8.1
key not valid for use in specified state | Apple Support Communities

While trying to download update 11.4 for i tunes i received an error message "key not valid for use in specified state" what does that mean ? anyone please help ?

while downloading update version 11.4 an error message appeared "key not valid for use in specified state " help ?

See if this post by turingtest2 fixes it : key not valid for use in specified state

Error Message "Key not valid for use in specified state."

Since July after my Firefox update, I have been getting the above error message whenever I attempt to update a software program. This is an message when I attempt Java or iTunes. I was suggested to look at my RSA file in the computer and it seems like the majority files in that file are "Old Firefox Data" files.

The Old Firefox Data files are generated each time you reset Firefox. This is done from the about:support page, the Firefox menu or if you start Firefox in Safe Mode and select to restart/reset.
The error, when searched for seems to apply to a Windows security update. I have not seen this is Firefox before.

MiniSAP - SE80 Prompts Error "Printer not suitable for job step..."

Hi all,
I bought an ABAP Objects book. I installed the MiniSAP. When I run SAP GUI and SE80, both with BCUSER and DDIC, it gives me error message "Printer not suitable for job step. Automatic printing not possible."
If I double-click on the message, it does not show the description of the error message, instead it displays an Internet Explorer error message "The page cannot be found."
Furthermore, the same error message, "The Page cannot be found", also appears in the area where the listbox and textbox for selecting Development Class, Program, Function Group, etc. Making these function becomes unavailabale. I cannot see the listbox and textbox in the Object Navigator. The only development class show is "$_TMP_BCUSER" (if I recall correctly). But nothing is in the development class.
How do I solve this problem?
OS: Windows XP Professional
Browser Installed: Internet Explorer and Firefox
Other info: I put incorrect IP Address in the Hosts file while installation was in progress. This created error. I then correct the IP Address in the Hosts file and resume installation. I still encountered error until I restarted my computer and resume installtion. I use IP Address 10.10.0.10.
Thanks in advance.
Regards,
Goh Tiam Tjai

I searched the solution in the other SDN sub forum (ABAP Programming). The following patch solves the problem.
http://www.sap-press.de/download/dateien/473/sapgui_patch.zip
Regards,
Goh Tiam Tjai

ERROR: "key not valid for use in specified state" when updating to Lightroom 5.6 in Win8.1

While doing a routine update from Lightroom 5.5 to v5.6 in Win 8.1, the installation halted at the start of the installation with the vague error message, "key not valid for use in specified state". Although v5.5 was working just fine, the install routine deleted the v5.5 application files. I rolled back to the previous system restore point (set just prior to the install) and recovered the executable files. However, now the 5.5 files won't open the default catalog, none of the backups, or even create a new catalog.
As v5.x was purchased as an update to v4.x, I've tried to reinstall the original Lightroom v4.x app from the factory disk. I get the same error.
Suggestions?
Thanks. Dan

I have a similar problem to Dan. while doing a routine upgrade from Lightroom 5.5 to 5.6 I got the
: "key not valid for use in specified state"
error and now Lightroom has completely disappeared. I've tried to uninstall, but there is nothing to uninstall. Going back to try to install the original 5.4 just results in the same error.
A problem may have been that I closed Lightroom when the upgrade started to download. It then re-opened again when the install was halfway through., I assumed that was an error and closed it. just after that the error first appeared in the installer.
I still had an older version of lightroom 4 installed. I've uninstalled it, and that didn't make any difference.
I've also tried removing anything in the registry left over from the old installs and that didn't help either.
Any suggestions?
CHeers, Angus

Key not valid for use in specified state - installation error

I am trying to install Adobe Reader XI on a Windows 7 computer at work and I get this error message: "key not valid for use in specified state." What is going on and how do I fix the problem so that i can install Adobe Reader?

This worked:
Solution 2: Re-create the Crypto folder.
Close Acrobat.
In Windows Explorer, do one of the following:
On Windows XP, navigate to C:\Documents and Settings\[your user name]\Application Data\Microsoft.
On Windows Vista, navigate to C:\Users\[your user name]\AppData\Roaming\Microsoft.
Note: These paths include hidden folders. To make hidden folders visible, see "Windows Tip - Show hidden files and folders" (TechNote kb402324).
Rename the Crypto folder as Crypto Old.
Open Acrobat. The Crypto folder will be re-created automatically.
Error: "Creation of this signature could not be completed. Platform Exception" when you sign a PDF (Acrobat 8, 9 on Wind…
Then deleted wse_andromenda files in control panel programs, run regedit

ERROR: Key not valid for use in specified state

ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Key not valid for use in specified state.

This is an old document but it does list several solutions that may be applicable: Error 1603: A fatal error occurred during installation

DontSaveSensitive; Key not valid for use in specified state error

I initially had my packages set to 'EncryptSensitivewithPassword' and usedthe config files. My job executes fine. But I noticed I was getting THE error "......Key not valid for use in specified state.....". So, I change the protection level
to 'DontSaveSensitive' , saved packaged ,build and re-imported it. And I still get the same result.
What am I doing wrong??   Package is on the same server where it was built.
I have a package in production that executes without the error. I made a change to the package (logging) in test and now it also encounters same error as the package referenced above.

created ssis package logged in as testsrvr\admin; tests fine.
      protection level - don't save sensitive
      use xml config files
move to production server logged in as prodsrvr\admin; tests fine in bids.
exec package via sql agent (runs under domain\prodsrvr account ). Both attempt same package
job attempt #1
type - cmdexec
run as - SQL Agent Service account
command - exec using dtexec.exe /SQL "\DS\DSU002A 586SSN_TO_SQL" /SERVER SQLDRK51 /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
receive error
Executed as user: ILSOS\sqldrk51. ... 9.00.4035.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.    Started: 7:00:00 PM Error: 2010-08-30 19:00:00.33     Code: 0xC0016016
Source:       Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there
is a cryptographic error. Verify that the correct key is available. End Error Error: 2010-08-30 19:00:00.35     Code: 0xC0016016     Source:       Description: Failed to decrypt
protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
End Error Error: 2010-08-30 19:00:00.35     Code: 0xC0016016     Source:       Description: Failed to decrypt... Process Exit Code 0. The step succeeded.
Job Attempt #2
type SSIS
run as SQL Agent Service account
package source file system
package - I:\SSISProjects\DSU002 Viisage Data Transfers\Viisage Data Transfers\DSU002A 586SSN_TO_SQL.dtsx
no error
Executed as user: ILSOS\sqldrk51. Microsoft (R) SQL Server Execute Package Utility Version 9.00.4035.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.    Started: 12:54:03 PM DTExec: The package
execution returned DTSER_SUCCESS (0). Started: 12:54:03 PM Finished: 12:54:08 PM Elapsed: 4.953 seconds. The package executed successfully. The step succeeded.

- 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 ----------- ERROR: Key not valid for use in specified state. ERROR: Install MSI payload failed with error: 1603 - Fatal error durin

I keep getting this error code when trying to download
- 0 fatal error(s), 3 error(s) ----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 ----------- ERROR: Key not valid for use in specified state. ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Key not valid for use in specified state. ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Generally this error happens because of an encrypted folder or insufficient permissions on that folder: http://support.microsoft.com/kb/834484 (MS Explanation)
Adobe has a page here: Error 1603: A fatal error occurred during installation

Reporting Service Integration mode and Key not valid for use in specified state

I had to uninstall SharePoint Foundation 2013 and reinstall it.
What I have done:
I uninstalled SharePoint and after that I removed all databases.
I reinstalled SharePoint Foundation 2013 and it completed without errors.
Everything else is working, except SSRS in Sharepoint Integrated Mode.
If I check Central Administration - Manage services on server, I can found out that SQL Server Reporting Service Service is
"Started". But if I try to create new service application (SQL Server Reporting Services Service Application), it gives me an error message:
"Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)"
I uninstalled SSRS in Sharepoint Integrated Mode and I reinstalled it but problems exists.
It seems that "Encryption Keys" cause this problem.
https://support.microsoft.com/kb/955757
https://msdn.microsoft.com/en-us/library/ms156010%28v=sql.110%29.aspx
I tried to Re-create Encryption Keys and Delete keys, but its not working either. It gives me only error message that:
"Unable to locate the Reporting Server Windows service for instance MSSQLSERVER."
I don't have any reporting server databases, because I removed all
databases when I uninstalled SharePoint. Also I don't have Encryption
Keys backups.
I have found several similar question but no answer, example here:
https://social.technet.microsoft.com/Forums/ie/en-US/df02dc05-5ce8-499d-9ba3-ab392a5fc3af/sharepoint-2013-ssrs-application-error-key-not-valid-for-use-in-specified-state-exception?forum=sharepointdevelopment
Any ideas how I can fix this problem?

Hi,
From the Reporting Server Configuration Manager you have to restore the encryption key.
Please try to delete databases(reportserver & reportservertempdb) and delete the reportserver and reports site on IIS. Then you have to start over the configuration again.
If the issue still exists, Please check ULS log to see if anything unexpected occurred.
For SharePoint 2013, by default, ULS log locates in
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS"
More information about SQL Reporting services Installation with SharePoint 2013 for your reference:
http://expertsharepoint.blogspot.de/2014/03/sql-reporting-services-installation.html
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Device Error-target device not suitable for use at 96% DVD Burn, Anybody?

Similar Messages

Maybe you are looking for