Device error when burning Blu Ray disk at 96%

Very simple program to use so far. Just drag and drop.
My current project was shot in HD 1080p about 2 hours or 13 gig long and I made 4 lower resolution DVD's no problem. I like how it shrunk it with out me having to do anything other than check the box (use space available)
However when I went to make Blu Rays in addition to taking about 18 hours its gets right to the end and spits the disk out unfinished and has device error at about 96% of burning finished. Disk will not play.
I have ruined 3 blank 4x blu ray disks so far, same result. I have down loaded and installed the 8.01 update, I will turn off the screen saver and anything else I can find, before I try it again.
Its a new computer with only PE8 running on it. Quad core Gateway with 8 gig ram and a almost empty 1tb hard drive and LG blue ray writer.
I have not tried to burn anything else with the blu ray writer, as thats what PE8 was for.
I did not have the timeline fully rendered before I started, if that makes any difference.
Anybody have any ideas.
Thanks in advance.
Philip

Sorry I'm a newby. I'll put this is PRE 8 where it belongs.

Similar Messages

"media not present" error when burning blu ray in PE12

I have two systems, both ground-up builds, identical Win 7 Home Premium and Premiere Elements 12 installs. Both systems have internal blu-ray burners. One burner is an ASUS BW-12B1AT and the other is a Pioneer burner (don't recall the model number).
System 1: Intel 4770k with Gigabyte MB
System 2: AMD 8-core with Gigabyte MB
System 1 gives "Media not present" error in PE12 when attempting to burn to blu ray discs using Verbatim discs. System is able to burn DVDs and CDs, and playback blu ray discs. System is also capable of burning blu rays using Nero.
System 2 works fine - blu ray media is recognized instantly by PE12 when in the drive and burns blu rays perfectly.
I swapped the blu ray drives and SATA cables from System 1 and System 2 with the same result - this eliminated the drive manufacturer and cables from being the problem, as both drives worked perfectly in System 2 and neither worked in System 1. I also tried different SATA ports and power supply taps on System 1 without any success.
Then, I noticed that on System 1, with the dialog box open and indicating the "media not present" error, if I ejected the blu ray disc and reinserted it, the burner LED would flash 18 times (approx. 1/sec) and then pulse briefly indicating a burst of activity for about 1 second, as if it was either reading the disc or writing to the SATA. If I pressed the "rescan" button during this brief burst of LED activity, then the disc was recognized and I could proceed to burn it. If I tried to press the rescan button at any time before this instant or after, the "media not present" error did not clear.
To me, this is an indication that something in the handshake timing of the SW and the burner is not correct, and that timing differences in the system HW are not provided for in the SW. I see that many others have had this issue and have had to buy work-around image burners to address this. I believe your burner drivers need to be reworked to eliminate this bug. This is evidenced by the fact that Nero works and your SW does not, and that different systems consistently exhibit this problem.
Please let me know when you will have a SW patch to address this or if you have any idea of system settings that can be adjusted (I don't know of any myself) that would eliminate this problem.

pastrobes
This is not Adobe. Rather user to user. If you want to contact Adobe, your likely route is via Adobe Chat.
If you have a feature request or bug report, then consider filing a Adobe Feature Request Bug Report Forum with Adobe
Adobe - Feature Request/Bug Report Form
The likelihood of an Adobe engineer seeing your thread here is essentially slim to none.
Your results are very interesting but lots more variables to consider.
Do you have any version of Premiere Elements other than 12? It would be interesting to learn if a prior version's burn
dialog would present with the Media Not Preset issue for your burn to Blu-ray System 1. That is easy enough done with a tryout of
11 or 10 or 9 from the following web site. ProDesignTools: Adobe® Developments in Focus
On the other side of the coin, you could give the new version a look in this regard. A new version is expected at the
end of September 2014.
As an aside, have you updated 12 to 12.1 Update, using an opened project's Help Menu/Update. If not, I would encourage
you to do so. It does correct an Expert workspace text styles issue plus other matters undefined by Adobe.
ATR

"Could not create ac3" error when burning Blu-ray

I've spent the last week designing a Blu-ray in Encore CS5. Upon burning, I was given the error message "Cannot create '_sessionfiles_Dsf_session_1_audio.ac3", and the burn failed (after going for seven hours). I really don't even know where to begin with this. The Blu-ray is about 80% full (20 GB) and includes multiple timelines and several menus (one of which has audio). No pop-ups. It should be a fairly straightforward project. However, it's given me problem after problem and has taken way too much time. Can anyone offer insight before I spend another week tracking down the problem? Thanks.

In the last few days, things have gone from bad to great and back to bad, and it's been non-stop work. I freed up a ton of space on the computer and backed it up. Then the computer gave me a kernel panic, which happened so often that I had to restore the whole computer. I don't know if that's related to the Encore issue. Then I tried to burn again, and it seemed to be working until it gave me an error message that said "Blu-ray Error: 'device error', code '3', Note: ". So I looked around online and decided to export as an ISO disc image file. That worked fine. Then I tried burning a Blu-ray using third-party software, which failed halfway through. Next I tried burning using Disc Utility. It got all the way to the end and said "Could not verify" and failed. I tried playing it in my Blu-ray player anyway. For the first time, it actually worked. The movie and the Scene Selection menu work fine. But when I try to go to Special Features, nothing happens. The Blu-ray is supposed to go to the Special Features menu at the end of the main movie, but it just goes to a black screen after that and locks up. Now I'm really lost. Any more suggestions? Thanks.

Runtime error when burning blu ray disc

I am attempting to burn a 1080i/29.97 blu ray disc and when it gets to something like 99% finished, i get a runtime error, and then
encore crashes. Could it be there there is not enough space on the disc? The video and audio combine to somthing like 23.5 GB.
Any help would be greatly appreciated.Also, running encore 4.0.

This Adobe KB Article might be able to give you some tips.
Good luck,
Hunt

Burning Blu-ray disks. Third party hardware needed?

I have read from earlier posts that it is not possible to burn Blu-ray© disks from DVDSP. Can third party hardware be purchased to burn such a disk having assembled the digital assets in DVDSP? Any recommendations?
Thanks in advance.
G5 Quad Desktop Mac OS X (10.4.8)

Thanks for your responses. I see that from DVD SP Late-Breaking news that'HD DVD projects authored by DVD SP 4.0.3 fully comply with the 1.0 version of he HD DVD specification...the new HD DVD standard. The disks will play on Apple DVD Player version 4.6.5 or later.
I haven't commited to the Blu-ray© player, just the Sony HD camcorder.
When the time comes, I will burn to a red laser disc per the Apple recommendation. And thanks for the Roxio link which makes it clear that a PC is needed for Blu-ray©
G5 Quad Desktop Mac OS X (10.4.8)

Burning Blue Ray Disks!

ok so im proberbly going to look like a total retard but i recently got an application called Toast and it said tha ti can burn blue ray disks! i personally disagree as i dont have a blue ray burner! im correct in thinking this right?
i have a 20inch iMac 2.0Ghz
please dont mock me heheheh xD

In other words are you saying that the OS must be able to support Blue Ray in order to read the media reliably. Reason I chimed in is I have a Lacie D2 blue ray drive and it burns blue ray discs (single and dual layer) fine, but now some of the discs won't read. Some of them will read when inserted but most of the dual layer discs/some single layer discs aren't recognized. I'm using the discs for archiving. Let me know your thoughts...thanks!

Has a stop marker any function when burning blu-ray discs with Premiere Elements 12?

Stop marker when burning blu-ray discs with Pre 12. Does it works?

Amiral
No.
This applies to Premiere Elements any version.
Stop markers placed on the Premiere Elements Timeline destined for burn to Blu-ray disc format on Blu-ray disc are not recognized at playback of that disc using the Blu-ray player.
If you need Blu-ray disc with stop markers, you can export your Premiere Elements Timeline content to an appropriate file type that will be compatible with a 3rd party software which will get the job done. I have heard that a software such as DVD Architect can do that, but I have not been there and done that.
Stop markers function at playback of DVD-VIDEO on DVD disc only. And, never place a stop marker at the end of the last item on that Timeline.
http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7e 19.html
Please do not hesitate to ask if you need clarification on anything written.
Thank you.
ATR
Add On...I have found that the situation is the same for stop markers and AVCHD on DVD and Blu-ray disc format on Blu-ray disc.

How to burn Blu-ray disk from Encore?

My project was shot and edited in HD. The camera was a Sony AX2000 1920 X 1080 60i the highest resolution for the camera. The project has been exported to Encore (CS5.5 Production Premium)and is on the timeline there. How do I get in touch with "Chat" to get phone help to go from where I am to burning a Blu-ray disk? When I try to email Adobe Help I am routed round and round back to same place and I can never find anyplace to send an email to Adobe to ask a support question. When I click on "Help" from Premiere Pro or Encore the explanations use frequent links to videos elsewhere for explanations and none of the links are functional! Why is that? I can't find an explanation online or in Adobe's Classroom in a book or anywhere. I would appreciate some links to videos explaining the process or some basic instructions. Thank you.

Encore also has a very active forum too: http://forums.adobe.com/community/encore/encore_general
Good luck,
Hunt

Burn Blu-ray disk?

Can I burn a Blu-ray disk on my Apple desktop without buying a special burner? I can burn regular DVDs, and view them on my laptop but not my Blu-ray player. I only want a couple DVDs from our son's wedding.

No.
You can only burn standard DVD's and they should play on a BluRay device.
You must be burning a "data" DVD as they will only play on a computer. Use iDVD to create a DVD.

Won't Burn Blu-Ray Disks

My brand new HP 16X SATA Blu-ray Writer (AR482AA) in my brand new z800 quit writing to Blu-Ray disks after just 12 disks. It did continue to write to other DVD/CD media, just not Blu-Ray. There is no support information to be found -- anywhere!!! (HP, are you listening?) So I was forced to fix it myself.
Tried different BR disks, uninstalling Roxio Business 10 and reinstalling, searched for system driver and firmware updates as well as non-existent information from all avenues I could think of. Sought out anomalies in the registry and looked for A/V, OS, and other updates corresponding with the timing of the failed burns.
The only thing I found was a Windows Defender update that loaded just a couple of minutes before the BR burning failed. That may or may not have contributed to the failure. No way to tell as unfortunately, the update "cannot be uninstalled." Couldn't find any corresponding information at Microsoft as well (Microsoft, are you listening?)
However, I was able get the Blu-Ray burning again, just not sure if it is realy fixed or if it will reoccur. The solution was to go into the device manager and uninstall the Blu-Ray drive (but leave the Roxio installed). Then, simply restarted and let the system find and install the BR drive again. Everything works great...for now....from a 5 minute fix.
Sure would like to have that day of my life back!!!
Note -- OS = 64-bit Ent. Vista

I am also having problems with my new Hp pavilion dv6. It will burn the disks but at poor quality. I can't get my samsung blu ray player to play it at all. The video plays back on my Hp dv6 but is broken up. Is this the problems you were having? I'm not sure if I'm doing something wrong or if its Hp's problem. I have taken video with my Sony HD camcorder and am trying to burn the movies onto blu rays. I have been using Verbatim BD-R 25GB 6X Blu rays. Any help would be great!

Burning blu-ray disks with Archgon

I have a HD camcorder and create home movies of my daugher with FCP X. I have an iMac (late 2012 model I think). I recently purchased the Sea Tech Archgon blu-ray writer super drive with the intent of buring blu-ray disks for the grandparents. The instruction manual for the blu-ray player states "Please purchase and download appropriate blu-ray playback software for Mac OS". My questions are:
1) When I plug in the drive, no icon appears on the desktop. There is power to the unit because it allows me to open and put a disk in.
2) Do I need to purchase Mac Blu-Ray player just for the iMac to see the drive before I can burn any blu-ray disks?
3) I don't intend to use the drive to watch any blu-ray movies. This is strictly for making blu-ray disks that can be popped into a regular blu-ray player so the grandparents and other relatives can enjoy the home movies.
4) Is FCP X an appropriate software, which I already have on my computer? It allows me to create DVD directly from FCP X, but when I tried to do it from FCP X, this drive does not come up as an option.
5) I also have Titanium Toast and purchased the blu-ray upgrade. Then I save the file from FCP as a master on the computer and attempted to burn the blu-ray using Toast. Again, this drive does not come up as an option.

1. Any external burner will only become recognized once you insert media. If you plug it into the Mac and launch Toast, it should show at the bottom of the Toast window. You can choose it and control the drive with Toast - open tray, close tray, insert DVD, etc.
2. No.
4. Not sure re. blu-ray, but try to export it as a .mov or Video_TS folder, then drag either into the Toast window. That is how I proceed using iMovie and/or iDVD. (I only use FCE for special effects/layered intros, etc., export at best quality settings, then use those with iMovie and/or iDVD). You do need software (Toast is best because of the blu-ray plugin) to burn to DVD.
5. Again, the drive should show up at the bottom - see screenshot (mine is only showing my internal Superdrive; once I attach my external burner, both will show up):

Can I burn Blue Ray Disk?

I would like to buy an external Blu Ray Burner. Can I use iDVD to burn Blue Ray. I have the latest iMac 7Cor. Thank You.

iDVD only authors/burns DVD discs. For Blu-ray you'll need Toast or Adobe Encore.
-DH

Encore Error when building Blu Ray *ISO (too many primary video...)

Hi
I have huge problem.
I'm creating Blu Ray Image (ISO)
I have project with
Main Menu (Button-Start Film and Button-Submenu) Background Video and audio
Submenu (16 Chapters Buttons and Button-Back to Main Menu) Background Video and audio
One Timeline (rendered in PrPro) 2:46h (16 Chapters on it)
I do Render motion menus first, then transcoding now of Timeline and when i Click Build I get this error
"Blu-Ray Object: "<Menu>Name_Menu top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
I couldn't Find any answers for this problem in google.
Anybidy had this and solved ?
My Machine is
Motherboard. ASRock P67 Extreme 4
Proc. Intel core i7 2600 3.4GHz LGA1155
RAM. DDR3 CL9: 12GB
HDD. WD WD10EARS 1TB Caviar 64MB Sata
Cooler Aerocool 700W
GFX. Asus Geforce GTX 460 1024MB DDR5
Win7 x64 Home Premium

Are you using an AVCHD file as a background video and Audio? The AVCHD files are the cause of the issue.I think this is a known issue in Encore and is discussed in the below thread -
http://forums.adobe.com/message/3158140
Thanks.
Shuchi

PSE8/PRE8 device error when burning DVD

When trying to burn a DVD using PSE8 and PRE8 in Vista Home Premium 64 bit, and now in Windows 7 Home Premium 64 bit, PRE8 stops at 96% burn and gives me "Device error - the target device isn't suitable for use." The DVD will run on the computer and the slideshow stops just short of the end. The DVD will not run on DVD player/TV. I had no such problems using PSE6/PRE4 on Vista setup. Suggestions?

Hi rqferq
There is a separate forum here for Premiere Elements and because the error you are describing would occur when running under Premiere Elements, I recommend that you post your question at
http://forums.adobe.com/community/premiere/premiere_elements

Can't burn Blu-ray disk image because get error message, "The operation couldn't be completed. (DSPPublishing error -1012.) What does it mean?

There was an error creating your disk image. The operation couldn't be completed. (DSPPublishing error -1012)

I don't have a background image. I called Apple and they had no idea what that error number meant. I deleted preferences for FCPX still didn't work, then delted all preferences and set up a new user. It now works. Apple has no idea what is going on.

Device error when burning Blu Ray disk at 96%

Similar Messages

Maybe you are looking for