Device Failure unable to recover

been having burning problems. My machine is almost three years old. Recently it it has been saying "The attempt to burn a disc Failed. the devise is unable to recover or retry." About every tenth try it works. I've updated all software. It occurs in both mp3 burning and audio and data. Help

EXACTLY the same problem -- I'm getting the run-around as to whether it is because of recent iTunes updates or relates to the Matsushita drives they put into these.
The problem is widespread -- slowing the burning speeds HAS NOT helped.

Similar Messages

  • Burn fails: "The device failed to respond properly, unable to recover or.."

    Hi all,
    Whenever I try to burn a disc with iTunes (I'm backing up my whole library), I get this error: "The device failed to respond properly, unable to recover or retry." I'm using MBP and the SuperDrive is Matshushuita UJ-857D.
    Anyone know what's going on? I've tried 4 different discs and SuperDrive has destroyed all of them so far
    Thanks!
    Nick

    same thing is happening to me... first my superdrive would hang and i would have to force a restart... now i bought a BRAND new lacie external dvd burner and i am getting "The device failed to respond properly, unable to recover or retry." it looks like all the posts dealing with this are fairly recent... probably an OS problem... hello??? apple???

  • MSI & ATI Radeon "recovered from a device Failure"

    .System:
    P4 2.4G 533Mhz
    MSI 645E Max-U with Sis 645 DX
    ATI Radeon 64 DDR VIVO AGP4x
    500 MB DDR PC2100 (266)
    80 GB HD ATA100
    Windows XP SP1
    The system just locks up, Dark screen and after a while turns to 640 x 480 4bit mode and says:
    "Microsoft Windows detected and recovered from a device failure. Please save your work and reboot to restore full functionality."
    From other forums same thing happens in Gigabyte, asus and via. It looks like asus has allready made a new bios update for there board I hope MSI do the same thing soone  ;(  ;( .
    Aparently 8X havent been fully exploted and there are some glitches. On top of that Windows XP and 2000 have some reflesh problems over 60 Hz (as it says in ati web)
    Mean while is up to us to look for workarounds until they do there job.  If the Mobos (motherboard) makers dont make the change then it will have to be up to ATI.
    Aparrently disabling the Fastwrite on windows helps a lot.  So far I have had this problem making a data backup on a DVD-R so two DVD-R wasted.
    If you want more info on where I got all this go to:
    http://www.rage3d.com/board/showindex.php?s=&threadid=33662452
    It looks like NVidia is having the same problem too but sorry cant help you there. go to this link to see if they can help you:
    http://www.tek-tips.com and search for weirdest video card problem   thread749-458930

    Your video card doesn't support AGP 8x, so that shouldn't be a factor at all.   Does SmartGart report it running at 4x?
    Did you do a clean install of XP when you started using your mobo?
    Has this problem only occured when using your DVD burner?  If so, the problem may lie with that.
    Only other suggestion... maybe time for a new video card?

  • Recording on DVD - "Unable to recover TOC" error

    Hi all
    Whenever I try to record on a DVD a face "Unable to recover TOC"
    I've tried to change the recording speed but no use.
    When I go to DVD properties and click on enable recording it does not recognize the DVD or any other CD in the drive.
    Please some help

    Hi,
    1. What software do use to burn cd/dvd disks? Try to use Nero, Ashampoo burning studio, Alcohol CD and DVD Burning Software,
    2. Then, I advise you to use high quality medias as TDK or Verbatim.
    3
    Go to device manager and remove the CD/DVD drive from the device list.
    Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class{4D36E965-E325-11CE-BFC1-08002BE10318}
    Reboot the notebook and wait until the CD/DVD drive would appear again
    If you still have problems, maybe there is a problem with your cd/dvdrom

  • Eroor after ligin - Unable to Recover Previous State

    Hi,
    I have fresh eBS vision installed on suse 9.0,
    1. I logging in to eBS home page
    2. I traing to open resposibility and getting error:
    'Error: Unable to Recover Previous State
    Transaction context has been lost for the page you requested. This error could have been caused by an expired user session or a system failure.'
    What does it means, how to avoid this error?
    Tnx,
    Edgar

    Did you re-run all the updates to get your computer back to the point it was at prior to "initilization" (by the way, "initialization" really refers just to formatting a disk and not all the subsequent OS installation, etc. that you did)? It is possible not all components of your applications are in synch with each other. I could easily see this happening with Quicktime and possibly Safari. Text Edit is probably so simple that it is not trying to interact with other components on the computer.
    Since Safari and Quicktime are easily available I would just download them and reinstall them.

  • Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!

    Hey Good Fellas,
    This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community.
    It gives me immense pleasure and happiness to write this particular post, because it is through SCN only i have been able to find the solution.
    Ok, let's get down to the Business quickly, shall we?
    I have been configuring Fiori App - Approve Purchase Orders. All the tasks for this have been done from SAP Help Site.
    Recently I upgraded the ERP/Gateway (Its an embedded deployment) to EHP 7 and UI to SP09, post which the Fiori Launchpad started giving the below error.
    If you look around the SCN, you will probably hit across these threads and so did I.
    http://scn.sap.com/thread/3571448
    SAP Fiori - UI Add-on SP09 update troubleshooting
    With the first thread, I tried everyone's solution and suggestions which had worked for others, but it didn't for me.
    With second thread (Excellently posted by Masayuki Sekihara), it started off with lots of efforts and double-checks applying all of these notes hoping that it would resolve the issue. But I had done all the steps 1-8 and still didn't get the solution.
    Besides the above two mentions I did umpteen number of other ridiculous things like implementing this note, that note, De-implementing another of the notes and everything i found as possible solutions on the Web.
    Now, the breakthrough here is checking the errors in /IWFND/ERROR_LOG. Well, on the browser it used to give error 'Failure - Unable to Load Groups' while at the server side, actual error was something unusual and remotely not related to what the error looked like in the browser. In the back-end, I was getting the error "Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist". And this is something i know how to correct.
    So just keep looking for the errors in /IWFND/ERROR_LOG and shift your focus there. That's really a good place to trouble-shoot.
    And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
    I am able to get inside the Fiori Launchpad now (I was quite at edge to really give up as all the possible solutions had been ruled out for me ) and do see the tiles of the apps configured.
    I hope this is going to be a good take-away for others who are having Odata handling issues.
    The floor is all yours now for your kind feedback. Be gentle with me, I am a very shy blogger.
    Best Regards,
    Akshay

    Steve,
    If you still have the error, this is what I did to resolve mines.
    1) Goto SPRO - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model
    2) Find out the entry for 'ZINTEROP_MODEL_0001_BE'
    3) Copy that entire row in a notepad for all the fields
    4) Create new Entry with all the fields, except change the Software Version to DEFAULT (As that's what missing for you'
    5) Save and give that another try.
    This is what I exactly wrote in my solution as well.
    Akshay wrote:
    And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
    A screen-shot perhaps helps you more.
    Let the other duplicate entry with Software Version other than Default be there. Important is that the software version that you have defined in your alias must be the one over here.
    Let me know how that goes?
    -Akshay

  • I just bought a MBP after my PC crashed. How do I set up my itunes library on my new Mac? I do not have a backup drive, and I was unable to recover anything from the trashed PC drive. Can the library be rebuilt/restored??

    Finally made the switch from PC to Mac, after my PC crashed and burned. I Do not have a backup on an external drive, and I was unable to recover any data from the trashed PC hard drive.
    Can I download my library, or is there a way to get my itunes content on my new Macbook Pro? I have almost 10 years of music and stuff on my iTunes, so I really hope there is a fix!
    Thanks!

    No backup is a huge mistake.
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store ... - Apple - Support

  • Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation it gives me an input/output error and stops. Any tips?

    Hi, I have a hard disk failure so to recover my data I am using disk utility to restore the data on an external drive while booting from a second external hard drive. When I perform the operation and after having selected both my destination and source drives, the operation begins but soon fails due to input/output error. If I try to create an image of the drive it gives me the same error message. Any help would be much appreciated.

    Disk Utility only creates a image of the drive, so it's no help getting exactly what you want, which is your files. If the file structure is messed up or the drive is failing then it's no help.
    If you have a external boot drive and you can't access the internal non-booting drive though the typical Finder and windows to transfer your files via drag and drop methods, then you need to install Data Rescue on the external boot drive and it will do as best as it can to recover your files. (works on non-encrypted/non-Filevaulted drives only)
    .Create a data recovery/undelete external boot drive
    Are you sure you have hard drive failure, or that OS X isn't merely not booting?
    Because if the drive is working physically, then there is a host of fixes
    ..Step by Step to fix your Mac
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

  • USB device failures and need to re-update under Windows 7 / Satellite A505

    I'm having a devil of a time trying to get access again to a set of devices which worked fine under Vista-32 and backward..
    Recent self-repaired problem, The laptop refused to accept a Garmin eTrex GPS via any other USB port except port 1 (the top-left port).. Attempts to attach it via ports 2 or 3, resulted in failure to read device, and Windows Device Manager reported the GPS asn an unknown device.  The fix to get it to accept the device on these ports, required uninstalling the driver to those two ports (plugging the device into either of those ports, when seen by Device manager, uninstall the device, unplug it, the plug it back in again.)  result now, all 3 ports will now accept the gps.
    Now, an old device failure..  I have 3 different Prolific USB to Serial (rs-232C) adaptor cords, for connecting to older serial devicees. (older GPS's, external older computers, robotics projects, etc.)  as of yet, the above remove/replace method will not allow connection of these cables (yes, using the supplied drivers, and a few generic found online from Prolific themselves) and, likewise refuse to access the devices connected to them.
    There is one other device, which uses another form of USB to serial (FTDI Chip, device is the Arduino microcontroller, which uses the FTDI D2xx chip to connect via USB) I'm surprised, is actualy in the installed Windows-7 driver library, as well as a Microchip PIC18C745 (Vellaman P8055 project board) (also native device under Windows-7)
    I've tried to find a reliable Prolific driver, but as of yet, these devices (Including one used in Microsoft's labeled version of the Pharos GPS500 dongle, which is sold with Microsoft Streets & Trips 2009 (The driver for this one, on other computers has caused system crashes.. Even under Vista & XP)
    Is this a problem with the laptop itself, or Windows-7 that I'm fighting?
    Stephen Griswold
    --:I''m forced to be a PC, and Windows-7 is giving me massive headaches! and Not My idea!

    This apparently applies also to the 2013 version of Microsoft S&T - and in Windows 8 as well.
       Error message when you try to use Streets & Trips: "Your registry settings for this application were...
    Always tell us which Tecra R950 you have when you post here. See the label on the bottom.
    -Jerry

  • Oracle SSO Failure - Unable to process request

    Dear gurus,
    i got problem when accessed ADF application which has registered with SSO, it says that
    "Oracle SSO Failure - Unable to process request
    Either the requested URL was not specified in terms of a fully-qualified host name or OHS single sign-on is incorrectly configured.
    Please notify your administrator."
    My environment is OAS Cluster front ended by LBR. so everytime i deploy the ADF application then i access it with LBR hostname which is http://oassvr.pelni.co.id, the host of each node it self are oassvr1 for node 1 and oassvr2 for node 2. the hostname that i added on partner applications was LBR hostname (oassvr.pelni.co.id:7777).
    i had done ssoreg OAS 1013 with SSO succeed then i tried to run/access ADF application with url http://oassvr.pelni.co.id:7777/HRd/faces/DepartmentLOV.jspx then i got above error. Please help! these are the error log from http log midtier :
    [Fri Aug 20 10:27:34 2010] [warn] [client 10.1.0.249] [ecid: 1282271254:10.1.0.41:172050:0:3058,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 10:29:08 2010] [warn] [client 10.1.0.249] [ecid: 1282271348:10.1.0.41:282956:0:6409,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 10:38:31 2010] [warn] [client 10.1.0.249] [ecid: 1282271911:10.1.0.41:233572:0:5430,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 11:30:50 2010] [warn] [client 10.1.0.249] [ecid: 1282275050:10.1.0.41:196882:0:3734,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 11:41:17 2010] [warn] [client 10.1.0.249] [ecid: 1282275677:10.1.0.41:286722:0:2897,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 15:43:09 2010] [warn] [client 10.1.0.249] [ecid: 1282290189:10.1.0.41:213462:0:10939,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 17:12:58 2010] [warn] [client 10.1.0.249] [ecid: 1282295578:10.1.0.41:151672:0:5100,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    [Fri Aug 20 17:33:40 2010] [warn] [client 10.1.0.249] [ecid: 1282296820:10.1.0.41:294968:0:9510,0] \n[OSSO] W05: Requested URL is not specified in terms of fully-qualified host name or invalid SSO partner configuration. Host from request oassvr.pelni.co.id:7777, registered host oassvr1:7777.\n
    Regards,
    Andes

    anyone has similar problem ?
    Please help.
    Thanks,
    Andes

  • If i create a new alias in my iCloud account, and forgot the password and can´t actually have open the account in any of the devices, how can I recover my password?

    If i create a new alias in my iCloud account, and forgot the password and I can´t actually have open the account in any of the devices, how can I recover my password?

    Welcome to the Apple Community.
    iForgot.com

  • Unable to recover deleted item in Exchange 2010

    I'm on Exchange 2010 Sp1 and Outlook 2010. I'm trying to recover a deleted item from the dumpster and when I do I get the following error message.
    "Outlook was unable to recover some or all of the items in this folder. Make sure you have the required permissions to recover items in this folder, and try again. If the problem persists, contact your administrator."
    I am the administrator and I fairly sure I have been able to do this since migrating my mailbox to Exchange 2010 from Exchange 2003. I've rebooted my PC. Any ideas what is going on?

    Thanks for all the suggestions. That's correct. On my second non problematic PC I can login to my mailbox and recover deleted items without any problems. So same mailbox but different computer no problem. Actually I can recover a deleted item on my problematic
    PC for other mailbox no problem too.
    In regards to Mumin CICEK question my dumpster is set to 30 days. I tried multiple messages. Even messages that I had just deleted and emptied from deleted items. And again I can recover those same messages from another PC no problem.
    In regards to the Windows profile may be corrupted I thought about that too. But what is interesting as using the same Windows profile if I login to a different mailbox I don't have any problems either.
    I'll try fixmapi.exe as that seems like a good idea.
    One last bit of additional information. My Outlook has hung and crashed on me several times of the past. It has happened when I've been connected to differernt mailboxes. From memory the debug mentioned something about a sharing violation. Maybe I should
    turn off my anti virus to see if there is a corralation?

  • HT203167 I am unable to recover my purchased ringtones from the itunes store. Does anyone know how to do this?

    I am unable to recover my purchased ringtones from the itunes store. Does anyone know how to do this?

    My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. If yours doesn't show (you've tried logging out and back into your account to see if it then shows ?), and you didn't have any pre-orders or auto-renewing subscriptions that might have used it, then you could try contacting iTunes support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom

    I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom 5, now when I try to register I am asked for the original licence/serial number. Where do I go from here??????

    If you upgraded from 3.6 to 5 (you didn't indicate buying 4.4) then you will need the serial number from 3.6 in order to be able to use 5.  If you did not keep a record of it there is a chance it might be available thru your Adobe account online, but if not, there is likely not much you can do except to return the upgrade and purchase a full version.  Try contacting support using chat and explain your situation to see if they can help.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    If you did purchase 4.4 then that should be sufficient to use to activate 5.
    I can never be sure what goes on with Lightroom, and the Adobe site (even when it works properly) makes finding information about products difficult these days so I am at a loss to confirm anything I say.

  • Failure - Unable to Start App - Fiori App

    Hi,
    I am getting the and error Failure-Unable to Start App when i am trying to start any App from my Launchpad.
    Below is the error we are getting
    2014-09-05 17:52:45 Failed to resolve navigation target: #PurchasingDocumentItem-display - Could not resolve link 'PurchasingDocumentItem-display' sap.ushell.renderers.fiori2.Shell.controller"
    Any help would be appreciated.
    Thanks
    Sarves
    Tags edited by: Michael Appleby

    Hi Sarves,
    Can you please try clear cash.
    You can also clean up your Model and RDP Cache by running (/iwbep/cache_cleanup) in ECC and in GW try (/iwfnd/cache_cleanup) please try it.
    Regards,
    Gurpal

Maybe you are looking for