Device group and applications affinity

Hello all.
I have some device groups created with CFS configured on them.
I need to ensure that a clusterized application runs on the server that is primary for the device group. I need to set an affinity between the affinity and the device group/file system.
The problem is that the SUNW.HAStoragePlus does not indicates the real primary for the device group, for example:
# cldg status ufs_homedg
Cluster Device Groups ===
--- Device Group Status ---
Device Group Name Primary Secondary Status
ufs_homedg billbd2 billbd1 Online
# clrg status ufsg-home-rg
Cluster Resource Groups ===
Group Name Node Name Suspended Status
ufsg-home-rg billbd1 No Online
billbd2 No Offline
In this output, the resource group is online in billbd1 and the device group primary is billbd2.
If I failover the resource group, the device group is switched also, but it seems that at startup, the resource group does not check who is the primary to start on that node.
This means that the status of the resource group does not helps to identify who is the primary for a device group and I cannot use it for affinity configuration.
¿How can I ensure that an cluster application starts on the node who is primary for the device group on which the file system is created?
I was thinking on a SUNW.gds for this purpose, but I wonder if there is another way.
Thanks in advance.
Edited by: Ivan.Ferreira on Jun 19, 2008 8:04 AM

Hi Tim, thanks for your time.
Yes, I'm using AffinityOn=TRUE. After some testings, I can see that the device group is switched at startup, but I don't know under which circunstances it does not.
Also, I can force discrepancy with the device group and the resource group if a perform a cldg switch.
So, if I run clrg switch, the device group is switched also. If I run cldg switch, the device group is switched but the HAStoragePlus resource does not.
This means that HAStoragePlus cannot ensure that the node is the primary for a device group and cannot be used for affinity on applications.
�What do you think?

Similar Messages

Printer device group and a label format in SAP AII

Hello @ all,
I try to configure a SAP OER System with SAP AII. Now I should configure the label printing with the transaktion /AIN/ASGN_PRF_FORMAT. I must take a profile name, a printer device group and a label format. The problem is now, that I can't chose a printer device group and also I don't know the label format. Where can I adjust the printer device group and which label format must be in that field?
Can anybody help me?
Thank you.
Peter

Hi Peter,
SAP AII sends the label format filename as part of the Command message xml to the printer during tag commissioning.
I assume you have configured the label format filename for SAP_PRINT_PROFILE using transaction /AIN/ASGN_PRF_FORMAT - Assign Format to Printer and Profile
Now you have to assign that profile to an ID type or GTIN, etc. using the menus under Profiles for Tag Commissioning and Label Printing.
Once this configuration is done, the xml command message containing the element WriteTagData is sent to the printer RFC destination configured against the Device controller as an HTTP message.
This command message will contain the label format and field names - value pairs as per the SAP_PRINT_PROFILE.

SSL Accelerated Service and device groups

I have a need to set up SSL accelerated services on a data center WAE and one edge WAE. In reading through the Cisco Wide Area Application Services SSL Application Optimiser Deployment Guide (2010), it states that best practice is to create an SSL device group and configure the SSL service and generate the keys through that group.
Simple question: Should only the data center WAE be placed in that group, or should also the edge WAE be in the group? The devices are running 4.3.3.

Only the data center wae's need to be placed in the SSL device group.
Regards
-Smita

Register Relationships and Device Grouping

Hi All,
Can anyone provide me some documentation on Register Relationships and Device Grouping in IS-Device Management and the respective use of the same.
Use means I mean: on which business cases we are going for register relationships and device grouping and the needed configuration needed to be done.

Hi Niladri,
Please go through the below link
http://help.sap.com/saphelp_rc10/helpdata/en/9c/862f9c10df11d285250000e8200ef0/frameset.htm
If you still face any problem do let us know.
Regards,
S

WAAS Central Manager Policy Definitions across several device groups

Hi there,
I am trying to find a way to apply a custom application policy(s) to multiple device groups. ( not the AllDevicesGroup).
I have not found a way to export or import the policy.
Any help would be appreciated.
Todd

I have my "Core" WAE's in a separate device group to prevent them from recieving a policy or setting intended for Edge WAEs. For example, If someone sets the assignment method to hash, I certianly dont want that pushed to my Core, ( using Mask assignment)
However, a custom application definition WILL need to be applied to both Core and Edge WAE's. Therefore I need a way to create the policy for all devices group and copy out and apply selected custom policies to the Core device group as well.
Problem: I have QUALYS Vulnerability Scanners that wreak havoc on WAE's by opening 1000's of sessions and not propoerly closing them, causing TFO Overload conditions, throughout the network.
Solution: create a custom policy to set Scanner IP action to pass-through. there are 30+ scanners so the match condition is lenthy and woudl be painful to build manually for each device group.
new Problem: need to apply this to multiple device groups.

MARS Device Groups

I am working with MARS 4.3.4 and have a question on what you can do with Device Groups. I don't see where they can be referenced in queries or rules. Am I missing something?

No, you're not. They're somewhat pointless really. You can create them, but they're only used to filter what is displayed, you still have to manually select each individual device in a query.
In other words, you can't create a report using a device group and expect future updates to the device group to show up in the report.
FWIW, there are lots of other "groups" like this too. Protego/Cisco seems to have forgotten the real value of making groupings like this.

NCM Device Group owner

We are currently running NCM 1.3 (Build 4045-112607). I am wondering if it is possible to define a default owner for Sites, Parent Device Groups, and Device Groups? Our dilemma is we have several engineers with the ability to create these containers. Once an engineer leaves you cannot delete their account as long as they are owners of a Site, Parent Device Group, or Device Group. I know if you have admin privileges you can select the owner of the Device Group at creation. Is there a way or is it possible to select/change the owner of a Site or Parent Device Group?

Hello Thorsten, I checked your helpful link, but it doesn't change the situation.
In my opinion I have an inconsistency in the ccr repository, but it is not my intention to edit it directly.
On node is left, and the diskset is Online:
! root@pixtest1:/ # scstat -D
-- Device Group Servers --
                         Device Group        Primary             Secondary
Device group servers: jboss-set           pixtest1            pixtest2
-- Device Group Status --
                              Device Group        Status
Device group status:        jboss-set           Online
-- Multi-owner Device Groups --
                              Device Group        Online Status
! root@pixtest1:/ # metaset -s jboss-set -d -h pixtest2
metaset: pixtest1: jboss-set: host pixtest2 is not in the set
! root@pixtest1:/ # metaset -s jboss-set -d -h pixtest1
metaset: pixtest1: Failed to delete hosts from DCS service: No such file or directory
! root@pixtest1:/ # metaset -s jboss-set
Set name = jboss-set, Set number = 2
Host                Owner
pixtest1      No messages are logged in syslog as I execute the commands.
-- Nick

How to deploy settings in Profile Manager through Device Groups

When I go to the Profile Manager web page and create a device group and configure the payload settings it doesn't seem to send the profile settings to the Mac devices that are in the group. How do I go about getting this to work so when I get a new device that is enrolled all I have to do is throw it in the group so it will automatically push out the correct payload settings that I configured?

What you're asking should work. You should be able to create a Device Group and adjust the setting for that group. Then when you add a device to that group, the settings will be pushed to the device automatically. So, it leaves me with a few questions for you:
Why don't you think it sends the payload? When you look under "Activity" do you see tasks in the "Active" area or in the "Completed" area... or something else?
What are you trying to change? Setting up email accounts on iPhones will appear right away, but there are other changes (especially on computers) that don't take affect until it restarts (or the user at least logs out and back in).
Are you sure you have devices in your device group? Sorry, probably a really silly question, but under your device group, do you see the devices under the "Members" section?
Are your devices "trusting" your server? Did you add the trust profile to the device when you enrolled it?
Sorry I can't be more help... but I can tell you that you can do what you are asking. We have it set up in our office, and it works really well. We just add the new device to the device group and it does the rest.

Profile Manager Devices/Groups Missing?

I am trying to set up Profile Manager but all I see listed under the library heading on the left hand side of the page is Apps, Books, Users and Groups. Earlier today I had Devices, Device Groups and some other stuff like the create enrollment button. Any idea how I can get these back or why they went missing? I have attached a screen shot showing what I am talking about.

It looks like "Device Management" somehow got reset. You need to enable it from the Profile Manager pane in Server.app.

How to access the mapping of Groups and Roles in the JAVA Application

We have mapped the EJB roles with the groups through the Visual Administrator. We have developed the SSO. We have developed the application through which we are creating the user and role and mapping that role with the created user. The created role is saved in some LDAP directory. The second application in which ejb methods are mapped with some security roles.The LDAP roles we are getting in Netweaver as groups and we can perform the mapping of the deployed ejb roles with the group.Now for the logged in user we want to get the roles mapped with it so that we can give/deny the access to the methods from EJB as per the role of that user .How we will get the access to the mappings of the roles with the group in the application, if I know the LDAP roles mapped with the user (since these roles are accessible as groups in the NetWeaver)
For e.g. From application created the user with the role as "manager". This role is stored in iPlanet directory.
This directory is mapped in the Netweaver.The manager role is displayed as the group in the Netweaver.
Created the EJB application with the method "displayTheAccountDetails() with the role as "ManagerRole"
This role is mapped with the manager group. Now we are having the details about the logged in user and the LDAP roles mapped to it (maneger role). How I will get the access to the details that for this group which ejb role is mapped in the application. So depending on that I can allow/deny the access to the ""displayTheAccountDetails()" method to the logged in user.

Do you, guys, work together?
See the last answer in this thread: How database works in UCM?

Standard smartform for application V5-Groups. and Output type LL00.

Hi,
I want the name of standard smartform for application V5-Groups. and Output type LL00.
I need to print Ship to party address of Multiple Deliveries.
Can anyone tell me the standard form name and Print program name.
Regards,
Rajender

Hi Lavanya,
SD_LOADING_LIST is a script.
Can you please provide me with a standard smartform as we need to develop this in smartform only.
Thanks,
Rajender.

Common Apple ID and Password for All Devices and Applications

I have devloped a plethora of Apple IDs and Passwords with iCloud, Apple Store, iTunes, Apple Support, etc., etc. and on iPad, iPhone, and MacBook. Where and how do I start to establish a single Apple ID and a single Password which will work with all the devices and applications?

Can't help with iOS devices, since I don't own any and have only one AppleID. Call AppleCare and let them work it out for you. FWIW, the AppleID system is a bit bolloxed, since one can't eliminate or transfer them around. Good luck.

ACS 5.3 - Error when changing Device group or Location

I am trying to move a device from the Default location to a sub group and get the following message when I try (either with IE or Firefox)
This System Failure occurred: Index : 0, Size: 0. Your changes have not been saved. Click OK to return to the list page.
it also gives me the same error if I try and change the Device type from default to a sub group. I'm sure I could do this previously. The ACS build is (VMWARE install):
Cisco Application Deployment Engine OS Release: 1.2
ADE-OS Build Version: 1.2.0.228
ADE-OS System Architecture: i386
Copyright (c) 2005-2009 by Cisco Systems, Inc.
All rights reserved.
Hostname: ACS1
Version information of installed applications
Cisco ACS VERSION INFORMATION
Version : 5.3.0.40
Internal Build ID : B.839
I'm suspecting it a read/write issue with the database or a database corruption. Can anyone enlighten me on how to fix it please ?
I have stopped and started the application acs via the console and show application status acs has the following to say about itself.
ACS1/admin# show application status acs
ACS role: PRIMARY
Process 'database'                  running
Process 'management'                running
Process 'runtime'                   running
Process 'view-database'             running
Process 'view-jobmanager'           running
Process 'view-alertmanager'         running
Process 'view-collector'            running
Process 'view-logprocessor'         running
Mel

Does this happen to small number of network devices or the whole set
If the former then I found the following CDETS
CSCtw59271    Random Network Device corruption after upgrade from ACS 5.2 to 5.3
Which includes the following workaround
Symptom 1: Delete and re-add the AAA client
Symptom 2:Modify the TACACS+ shared secret of the Network Device, re-enter the same key and save the Network device.
>>>> Use case where TACACS+ was used
There are some important fixes related to upgrade issues in patch 5 and later for ACS 5.3. While these do not relate to NDs I do recommend installing this patch

I see "Enrollment Settings" under device groups but it doesn't seem to do anything. Is that normal?

Hello, first time poster.
I'm new to most things apple aside from basic use of ipads and iphones. I was put in charge of the ipads for my school district and after some research and effort, I've gotten a mac server (on mavericks) up and running.
I have setup an MDM, gotten the token, gotten the VPP, etc...
Everything is working as it seems to be working. But...
In Device groups, under settings for a device group I see "Enrollment Settings" with things like "prompt user to enroll device" and "Supervise (IOS only)". So I added a device to a new group, reset the device in question and nothing. The settings appeared to do nothing. Is that normal or am I missing something?

Which version of Server.app? 3.1.2?
Verifty local DNS services. Invalid DNS causes other OS X Server components to have issues. You'll need DNS on your local network somewhere, whether that's served by OS X Server, or another DNS server doesn't matter.
Launch Terminal.app from Applications > Utilities and issue the following harmless, diagnostic command:
sudo changeip -checkhostname
That'll require an administrative password for the sudo, might generate a one-time message about the use of sudo, and will then display some configuration information and then an indication that no changes are required, or that there are network or DNS issues. If you're not in .local or .arpa, that'll usually give you a good view of your local network configuration.
The device has to be enrolled with Profile Manager server. How you do that depends on how you want to manage your devices. There are various overviews of how this stuff works too, if you're getting started: here is one video.

MVC model in Web systems and applications

MVC model in Web systems and applications
Object-oriented design model is experience, MVC idea is a user interface for the original. This article discusses how the major application areas in the new Web design patterns and the use of MVC framework. The article first introduced the concept of design patterns and characteristics, and MVC architecture design concepts and analysis of the MVC framework contains several key models. Based on the characteristics of Web applications on how to use patterns and MVC framework made some design ideas.??
1. Introduction
1.1 design model
Object-oriented technology and the emergence of software applications has greatly enhanced the trusted and software quality. Object-oriented programming than previous models to various programming simple and efficient, but the object-oriented design methodology than the previous design methods to complex and much more skill, a good design should be both on the issue of gender, but also to take full account of the problems and needs sufficient interoperability. In the past 10 years, people in the object-oriented technology and the practical application of research to explore certain issues in relation to the creation of a number of good solutions, the so-called object-oriented design patterns. Object-oriented technology is one of the purposes of enhancing the software trusted, and to design model, design programmes in important positions from a deeper sense of meaning and essence embodies trusted. There are many people in the design model definition, which cited Christopher Alexander is the largest design model definition : Each design model is a tripartite rule, which expresses a contextual environment (Context), a problem and a solution. Design models generally following basic elements : model name, the purpose solution effect 1995-1998 code and related design models. There are several classifications design patterns can be divided into a model based on the purpose (Creational), structural type (Structural) and the type of behaviour (Behavioral) three. It is mainly used in the creation of a model-based object model-based structure to deal primarily with the category or combination of objects, used to describe behavior-based model is the main target for the category or how stress and how to allocate responsibilities. Design patterns can be divided into categories based on the scope and target mode model type model dealing with the relationship between the categories and sub-categories, these relations through the establishment of succession in Translation moment to be finalized, are static. Model is targeted at addressing the relationship between the moment of change these relations in the operation, more dynamic. Model features : through the experience acquired in a structured format to write down, avoid encountering the same problems on the first design, exist in different abstract level, in continuous improvement, can be trusted artificial product for the design and best practice in the world to be combined to address larger issues.
1.2 MVC framework
MVC was first used in a user interface Smalltalk-80 China. M representative models Model, representatives maps View V, C representatives controller Controller. MVC trusted code with the aim of increasing the rate of data reduction expressed, the data describing the operation and application coupled degrees. Also makes software Keweihuxing, restorative, expansionary, flexibility and packaging of greatly enhanced. Single-user applications are usually incident-driven user interface to the organizational structure. Staff development tool with an interface painting of a user interface interface code based on user input and then prepare to implement the corresponding moves, many interactive development environment encouraged to do so, because it emphasizes first and then a functional interface. Some software design model is the strategy that will be fixed before the code into the regular system of the final. Result is that the procedures and organizations around the user interface elements in the user interface elements of those moves, data storage, applications and functions of the code is used to indicate the way intertwined. In single-user system code structure can be so, because the system will not demand frequent changes. But for a large system such as large Web systems, or e-commerce systems to be applied. Model by incorporating data from a variety of access and control data can be separated to improve distributed system design. MVC design pattern is composed of three parts. Model is the application object, no user interface. Type in the screen showing that it represents the flow of data users. Controller user interface definition response to user input, the users responsible for the action against the Model into operation. Model View data updated to reflect the adoption of data changes.
2. MVC design pattern,
An MVC framework for the design of the system includes many models, but with MVC is most closely related to the following three models : Observer, Cambridge and Strategy.
2.1 Observer models
MVC through the use of purchase / notification form and the separation of the Model View. View to ensure that their content accurately reflected Model and state. Once Model content changes, there must be a mechanism to allow notification to the relevant Model View, View can be made relevant at the appropriate time updating of data. This design is also more general problems can be solved, the target separation, making a change to the target audience affect others, which targets those who do not know the details of the object being affected. This is described as Observer in the design model. Model type : Observer model is the object-oriented model, it is behaviour-based model. Model purposes : definition of hierarchical dependence relations between objects, or when a target value of the state change, all its dependent relationship with the object are notified and automatically updated. There are a variety of data may show a way, in different ways and may also show. When a way through a changed data, then the other should be able to show immediately that the data change and do accordingly.
Effect :
1. Abstract coupling. I only know that it has a target audience of some observers, the observers met each abstract Observer category simple interface, does not know their specific affiliation categories. This makes the coupling between goals and observers smallest and abstract.
2. Support radio communications. Needless to notify designated observers goals, how to deal with the observer informed decisions.
3. Possible accidents updated. We update logic, avoiding mistakes updated.
2.2 Faculty model
MVC is an important feature of View can nest. Nest can be used for any type of combination of local maps available, but also management of type nest. This thinking reflects the type and mix of components will be equal treatment design. This object-oriented design ideas in the area of Cambridge has been described as a design model. Model types : Cambridge model is the object-oriented model, it is also the structure type model. Model purpose : to target portfolio into tree structures to express "part-whole" level structure. Prepared for the use and combination of individual target audiences with the use of consistency.
Effect :
1. Definition of a target portfolio includes simple objects and the structure of the category level. Simple objects may be complex combinations of objects, and can be targeted portfolio mix. This customer-code used in the target areas can use simple combinations target.
2. Simplify customer-code. Needless to know their customers - a mix of target audiences is a simple target or can use these items in a consistent manner.
3. Easier to add new types of components. New components can easily be changed to a combination of customer-targeted codes.
2.3 Strategy model
Another important characteristic is the MVC can not change the View of changes View response to user input. This often requires a change in response to the logic of the system is very important. MVC to respond to the logic involved in the Controller. Controller of a category level structure could easily change to the original Controller appropriate, a new Controller. View Controller son used to achieve a specific example of such a response strategy. To achieve different response strategy, as long as examples of the use of different types of replacement will Controller. Also in the running time by changing the View Controller for users to change View of response strategies. This View-Controller relationship was described as an example of Strategy design pattern. Model types : Strategy model is the object-oriented model, it is behaviour-based model. Model purposes : definition of a series of algorithms, and their packaging, and ensure that they can replace each other, making algorithms can independently use its customer-change.
Effect :
1. Strategy category levels for Context definition of the relevant algorithms can be trusted or behaviour.
2. Alternative methods of succession. If the direct successor Context, with different acts will be added Context act, the realization of which would algorithm mixed up with Context, Context hard to preserve and expand, but can not dynamically changing algorithms. Will be enclosed in a separate Strategy category algorithms to enable algorithm independent Context change easily cut over expansion.
3. Can provide the same acts different date.
4. Strategy-must understand what customers between different.
5. Context and Strategy communications between costs.
6. An increase in the number of targets.
3. MVC in Web application system
Now some of the distributed systems such as Web-based B2B e-commerce system, suitable for use MVC framework. Through analysis from the perspective of high-level applications can be a target divided into three categories. Category is shown for the target audience consists of a group of commercial rules and data, there is a category that is receiving requests to control commercial target to complete the request. These applications often need to change is shown, such as web style, color, but also need to demonstrate the contents of the display. And the business rules and data to be relatively stable. Therefore, said that the frequent need to change the View objects that the business rules and data model to be relatively stable target, and that the control of the Controller is the most stable. When the system is usually issued after the View objects by artists, designers or HTML/JSP system managers to manage. Controller target applications development personnel from the development and implementation of rules for commercial and business development personnel from the target data, database managers and experts in the field of common completed. Show in Web?? or customers - control logic can be Servlet or JSP, dynamically generated Html. Generally used Servlet better than using JSP. JSP will be better with the Html code of separate codes for page designers and developers of separation efficiency. Servlet and JSP can complete all complete functions, actually JSP eventually converted into a Servlet. And control of the target system exists in every level, the coordination of cross-layer moves. Contain business rules and data objects exist in the EJB layer (EJB-centred model) or Web?? (Web-centred model).
3.1 View in the Web application system
View of the system shows that it fully exist in Web??. General by JSP, Java Bean and Custom Tag. JSP can generate dynamic web content using Java Custom Tag easier Bean, but it can show the logic of packaging, and more conducive to modular trusted. Some well-designed in a number of JSP Custom Tag can even be used in different system duplication. Model for control of JSP and Java Bean objects. JSP through Java Bean objects to retrieve the data model, the Model and Controller object is responsible for updating the data on Java Bean. In general, can we devise all possible screen that users can see all the elements of the system. Based on these elements, to identify the public part of passive components and dynamics. Can consider the use of templates means to separate the content generated JSP public, also need to change their generation Html or JSP from a JSP templates to dynamically introduce these different parts (include methods). Another issue to consider is screen option, when dealing with End users request template automatically available to show that the concern that users must know what is the screen components. So can consider all screens on the definition of a centralized document, such as a document or text document java. Taking into account the possibility of changes in future document definition screens, the best use of text documents such as a XML document, so future changes to the recompilation. According to the URL and user input parameters to shine upon the results of a screen, of course, likely to be made on the basis of the outcome of the implementation of actions to choose different results screen. Therefore, the need for a request for matching resources with document (XML), if a URL request several different results, it must specify in the document need to control the flow (a controller object), as well as the corresponding screen different flows.
3.2 Model in the Web application system
Model objects represent business rules and business data exist in EJB layer and Web??. In J2EE norms, the system needs some data stored in the database, such as user account information (account model), the company's data (company model), some not recorded in the database. If a user browsing the current catalogue (catalog model), the contents of his shopping (shopping cart model). Which one of these models exist in the data according to their life cycle and scope to decide. In Web?? a HttpSession and ServletContext and Java Bean objects to store data in the EJB layer is a data storage and logic EJB to. Web?? the Java Bean objects stored in the model layer model of the EJB object data copy. Because there are many different EJB tier model targets, so Web?? through a ModelManager to control the EJB layer object model in ModelManger background model can be used for packaging methods. In the EJB layer and the rules have all the data into EJB model is inappropriate. If the database can visit the Dao object model into objects. Dao can be encapsulated and the specific details of the database in the world, if we can write a different table, a number of databases, or even multiple databases. If the orders can be a model for OrderDAO, it may have to deal with Order table, table and OrderItemLines OrderStatus table. Value can also consider the use of targets. Value can be a target of securing long-range targets, because every time the remote object attributes could be a long-range redeployment process will consume network resources. EJB objects in the distance can be used instead target. In the distance, one-time items to be targeted instead of the value of all attributes.
3.3 Controller in Web application system
Coordination with the Model View Controller object to the request of users into the system to identify incidents. In Web?? generally a MainServlet (or Main.jsp), and receiving all requests, it can use screen flow management devices (ScreenFlowManger) decided next screen. There is a general request processors RequestProcessor contains all requests are needed to be done to deal with logic, such as the request translated into system events (RequestToEvent). Acting processors usually also includes a request for ClientControlWebImpl, it is logical to deal with the EJB layer in Web?? Acting. In EJB layer, a layer for EJB tier Web ClientController provide the CD visit. Another StateMachine used to create and delete ejb handle Web?? sent to the incident. Controller Another important function is synchronous View and Model data. ModelManger contained in a ModelUpdateManger, it puts events into a Model System assembly that all the needs of synchronous Model, and then notify Listeners do synchronous operation.
4. Concluding remarks
In recent years, with the Internet technology development and the emergence of new business models, the Web is based on a large number of applications. On how to design these systems architecture, and gradually there has been some convergence of opinion, the most important point is that its structure should be rational in the open. Demand than ever faster development of technology and design concepts, systems for the future, the cost of upgrading the smallest, research software systems architecture still very useful and necessary.

Bravo. And your point is?

Device group and applications affinity

Similar Messages

Maybe you are looking for