Device Id not exists in the system list

device id is not exists in the SYSTEM
how do i add the device id to the system
previously, i have sync a few application and works fine,
yet , after i clean up merep_purge...the device id gone...
how to resolve this..

Hi yzme,
Hope your problem is resolved by now.
If not just like to mention following points and i am sure it will definitely answer all your queries.
1. Device ID gets generated only at the time of first time synchronisation with the MI server.
2. You can delete the device ID by running some function module or by uninstalling MI client.
3. but if you have deleted the device ID by mistake, you have to reinstall the application and after sync it will generate a new device ID.
4. When ever you deploy any new application it will generate a new mobile ID.
do not confuse the mobile ID with device ID. mobile ID is different for different application and user on same device.
Regards
Satya

Similar Messages

Tax Code does not exist in the system (T007A)

Hi All
When we try to create a receipt for a particular expense type in ESS Travel & Expenses, we get the follwing error "Tax code Z0 does not exist in the system (T007A)". Upon creating a tax code Z0 it gives the following error "Tax code does not exist in the system (T007A)". When we change the Receipt currency to USD instead of Bristish Pound it gets accepted without the error. It works perfectly fine when expense report created using GUI. The error occurs only when we create the expense report using Portal ESS T&E. I was not able to find anything related to this in the SDN. If any of you could help me out, that would be great.
Thanks, Raj

Hello Mr. Raj!
I checked the related issues that other customers reported.
I came up with a list of things you can try that may help you solve your issue.
a) Check if the field V_706D_B-LAND1 is filled with the home country in the IMG step 'Define Global Settings'. So may I ask you to check. Moreover, if this is not the reason, may I also ask you, if you get the same error when using our backend test transaction PR_WEB_1200? Thank you,
b) Could you please check that you don't have any expense type with value " "(blank) in the tax code field in V_T706B1?
c) Apply Note 1129853 - Web: Input tax code for credit card receipts
d) Please follow in IMG:
Financial Accounting
Travel Management
Travel Expenses
   Master Data
    Control Parameters for Travel Expenses
     Define Global Settings
Input Tax
Country                                       { Your country here }
Enter an input tax code for 0% input tax [    ] <<<
If here it's blank, this must be filled with a tax code. I found this out when I set the field "Input Tax per Travel Expense" then I get a warning "Enter an input tax code for 0% input tax".
The reason for this is that in your system, you don't have a "blank" tax code and it looks for this entry. Please kindly define a tax code in this setting.
I hope I was able to help you with this information.
Wilian Segatto
SAP Support - HCM/XSS

Checklist _ product does not exist in the system

Hello experts,
I am customizing Checklist for CRM 7 Service.
However, I am struggling as I have the following error : "Item 20: The product does not exist in the system". Indeed, I have seen that the checklist creates an item with the item category 'FCHK' in the transaction type. However, the product for this item is empty in 'crmd_order' and creates error in the web_ui. Another error appears, which is linked to the first one, 'Item20:The item category FCHK is not permitted for the product'.
Any help on the checklist customizing would be appreciated.
Regards,
Anaïs Jaussaud

Hi Anais,
Please go through : How to Configure Checklists in SAP Solution Manager 7.1 -- Part 1
Also please see that item category determination has to be set for the check list product other wise no determination will take place properly
<Transaction type> + CKCU = CHKL
/Hasan

PO does not exist in the system

Hi,
While creating sales order PO not given and saved the Sales order with out PO No. Again in change mode realised that PO not given and when im trying to give PO following are the error message.
Purchase order 428264 does not exist in the system (see long text)
Message no. V1583
Kindly send the responses.
Thanks
Madhu.

Hi,
I am taking two different posts from this thread:
1st:
1. Sales order been created with out PO number.
2. In the change mode system allows to key in PO number.
3. When keying in the PO number system throws an error ' PO 12345 does not exist in the system".
Now my query is how to find the right PO number.
Following are the long text.
Purchase order 12345 does not exist in the system (see long text)
Message no. V1583
Diagnosis
You are creating an order for a consolidated company and must eliminate internal business volume. For this reason, the system tries to determine if the related purchase order exists. This is not the case, however.
Procedure
Enter the relevant purchase order number
This sounds as you go to T. Code: VA02, Keyed-in your Sales Order No. and then hit "Enter". Now inside Sales Order, you are trying to key-in P.O. No.
Now, 2nd post:
Im sorry the issue is not resolved yet. The PO No which user is keying in the sales order is quite unique. When i checked the previous PO's in that series it is there. But the issue is for the given set of sales area it is not there.
Following are the steps performed:
1. In VA02 in search critria given the series (OCJ*).
2. There are set of sales orders available for the given series.
3. But these series of sales order are from different set of sales area.
4. There are no sales order available in the series for the given sales area.
Kindly suggest whether im missing any config setting?
Which suggests as you go to T. Code: VA02, and inside field: Sales Order, you Press F4 (or you have entered P.O. No. under Tab: Search Criteria).
Now, there are few queries:
1. Have you entered P.O. No. within Sales Order, while created? If not, then how come System will search for Sales Order, having specified P.O. No.?
Secondly,
If, you are searching through F4 and you have created Sales Order with the same P.O. No., then within new window that pops-up; go to tab: Sales Document according to Customer PO No.
Field: Purchase Order No.
key in your filter condition (P.O. series with appropriate *) and make Field: Maximum hits, blank. System will throw all the Sales Order, having P.O. Series based upon filter condition.
Now, SORT the output based upon either "Purchase Order No." or "Sales Org".
Hope, i have understood your query, now.
Best Regards,
Amit.
Note: Remember, if there is no such Sales Order with desired P.O. No., system will not list-out it in search. To do so, you have to attach P.O. No. within Sales Order under field: Purchase Order.

Trip country IN / trip region do not exist in the system (T702O)

Hi Experts,
While creating Travel request in TCode TRIP I am getting this error"Trip country IN / trip region do not exist in the system (T702O)"
But the table T702O does not exist when i checked in SM30. Can u please tell me how to solve this error.
Thanks and Regards,
Shilpa

Hi Shilpashree,
I am also facing the same problem. I maintained T702O table, schema & V_T706O. But still facing the same problem.
Please help to sort the issue. Even i had followed some of the SDN links:
Trip country IN / trip region do not exist in the system (T702O)"
Re: Trip country IN / trip region do not exist in the system (T702O)
Error while Creating Travel Request ..thru TRIP
Thanks in Advance

System is not recorded in the system list

Hi all,
I am using BI 7 system which is connected with a source system of SAP R/3 system and there is no problem in the connectivity between these sytems.
When I tried to save a user defined ztable in BI system it shows an error below and also the description the error message would be. Please go through the following the let me provide the solution.
error: System BI& is not recorded in the system list.
Explaination of the error follows:
System BI7 is not recorded in the system list
Message no: TR638
Diagnosis
The current transport route configuration does not have the system BI7 in this current system list.
The transport route configuration was probably not maintained after the system setup, or was changed incorrectly.
Procedure for system Administration
The system Administration need to change, activate and distribute the transport route configuration accordingly. All systtems in the transport domain must be in the configuration.
Help this to solve.
--regards,
Durai.S

Hi,
Check in STMS whether your transport route is configured correctly or not. As per error message there is problem in your transport route.
Thanks
Sunny

Field ZZBUDAT is delta-relevant, but does not exist in the field list

Hi All,
I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
So i have enhanced the datasource now that date is coming in my datasource.
But when i tried to make delta on that date field its showing error-
Field ZZBUDAT is delta-relevant, but does not exist in the field list
Message no. R8279
Diagnosis
The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
Now how i can make this field dalta relevant?
Thanks,
Piyush

Piyush,
I think the message in SAP is quite clear....
If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

Cannot drop the table because it does not exist in the system catalog. Transaction context in use by another session

Hi Every one,
An error has occurred during report processing. (rsProcessingAborted)
Get Online Help
Query execution failed for data set 'NonFinTran'. (rsErrorExecutingCommand)
Get Online Help
Cannot drop the table '#NonFinTran', because it does not exist in the system catalog. Cannot drop the table '#MultipleNonFinTran',
because it does not exist in the system catalog. Transaction context in use by another session.
NOTE: NonFinTran &
MultipleNonFinTran are
the Temp table in my storedPoc.
Please any help me to solve this issue.
Thanks & Regards,
Anil Kumar
Anil Kumar

Hi Harsh,
Below is my Stored Proc
SELECT @ServerName=datasource from master.dbo.sysservers WHERE catalog='Voyager'
SELECT @ServerName3=datasource from master.dbo.sysservers WHERE catalog='AuditLog'
SELECT @ServerName2=datasource from master.dbo.sysservers WHERE catalog='Portal'
IF @ServerName IS NOT NULL SET @ServerName='[' + @ServerName + '].' ELSE SET @ServerName=''
IF @ServerName3 IS NOT NULL SET @ServerName3='[' + @ServerName3 + '].' ELSE SET @ServerName3=''
IF @ServerName2 IS NOT NULL SET @ServerName2='[' + @ServerName2 + '].' ELSE SET @ServerName2=''
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
CREATE TABLE #NonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
CREATE TABLE #MultipleNonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
INSERT #NonFinTran
EXEC('SELECT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, DateTime, '''', '''', '''', ''''
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''ChangeBillPayDefaultAccountEdit'',''ChangeExpiryUserPassword'',''ChangePasswordEdit'',
''ChangeUserPassword'',''ManageAddressMaint'',''ManageContactMaint'',''ManageSecretQuestionAnswerEdit'',
''ManageTransLimitMaint'',''OtherBankAccountMaintAdd'',''OtherBankAccountMaintDelete'',''OtherBankAccountMaintEdit'',
''WithinAmBankAccountMaintAdd'',''WithinAmBankAccountMaintDelete'',''WithinAmBankAccountMaintEdit'',
''SetAccountMaskPreferenceAudit'',''ChangeLoginIdAudit'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
INSERT #MultipleNonFinTran
EXEC('SELECT DISTINCT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, Audit.DateTime as AuditDateTime,
(SELECT DISTINCT SUBSTRING(A.BranchCode,3,3) FROM ' + @ServerName + 'AuditLog.dbo.CCAuditLogEntryView X INNER JOIN ' + @ServerName + 'Voyager.dbo.CCuser U
ON X.UserId = U.UserId INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_CustomerProfile P ON P.EnrolId = U.TAXID
INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_AccountListing A ON A.CIFNO = P.CIFNO
WHERE X.UserId = Audit.UserId AND A.AccountNo = SUBSTRING(Audit.TrxField1,11,16) AND P.CIFNO = A.CIFNO
AND (SUBSTRING(A.BranchCode,3,3) <> NULL OR SUBSTRING(A.BranchCode,3,3) <> '''')
AND CHARINDEX(''AccountID='', Audit.TrxField1, 1) > 0),
SUBSTRING(TrxField1,14,1), CASE WHEN CHARINDEX(''AccountID='', TrxField1, 1) > 0 THEN
SUBSTRING(TrxField1,11,16) ELSE '''' END, CASE WHEN CHARINDEX(''AccountType='', TrxField2, 1) > 0 THEN SUBSTRING(TrxField2,13,3) ELSE '''' END
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''SetAccountAttributesAudit'',''SetAccountFriendlyNameAudit'',
''AccountProfileMaintULDelete'',''AccountProfileMaintLHAAdd'',''AccountProfileMaintLSCAdd'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
SET @stmt = '
SELECT * FROM
SELECT BranchName,
CASE WHEN SUBSTRING(FromAccountID,1,6) IN (''519901'',''559409'') THEN ''DC''
ELSE
CASE FromAccountType WHEN ''01'' THEN ''SA '' WHEN ''02'' THEN ''CA '' WHEN ''03'' THEN ''FD ''
WHEN ''SA'' THEN ''SA '' WHEN ''CA'' THEN ''CA '' WHEN ''FD'' THEN ''FD '' ELSE FromAccountType + '' ''
END
END +
case when Len(FromAccountID) =16 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4) END
when Len(FromAccountID) =15 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3) END
ELSE FromAccountID
ENd
AS FromAcctNo,
CASE TrxId
WHEN ''AccountProfileMaintLHAAdd'' THEN ''Link Account/Card''
WHEN ''AccountProfileMaintLSCAdd'' THEN ''Link Account/Card''
WHEN ''APMFamilyFirstAdd'' THEN ''Link Family First Account''
WHEN ''AccountProfileMaintULDelete'' THEN ''Unlink Account/Card''
WHEN ''BalInqFD'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE ''Fixed Deposit Balance Inquiry'' END
WHEN ''BalInqCASA'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE
   CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Balance Inquiry''
   ELSE ''Current Account Balance Inquiry''
   END
  END
WHEN ''StopCheck'' THEN ''Stop Cheque Request''
WHEN ''CheckReorder'' THEN ''Order Your Cheque''
WHEN ''CheckInquiry'' THEN ''Cheque Inquiry''
WHEN ''TransHistFD'' THEN ''Fixed Deposit Transaction History''
WHEN ''TransHistCASA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Transaction History'' ELSE ''Current Account Transaction History'' END
WHEN ''StmtInqCC'' THEN
CASE WHEN FromAccountType IN (''DR'',''03'') THEN ''Debit Card Statement Inquiry'' ELSE ''Credit Card Statement Inquiry'' END
WHEN ''StmtInqDA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Statement Inquiry'' ELSE ''Current Account Statement Inquiry'' END
WHEN ''StmtReq'' THEN ''Printed Statement Request''
WHEN ''StmtInqIAMSTAR'' THEN ''E-AMSTAR Statement Inquiry''
WHEN ''Repayment/Transfer Inquiry'' THEN ''Repayment/Transfer Inquiry''
WHEN ''Account Inquiry'' THEN ''Account Inquiry''
WHEN ''Payment Inquiry'' THEN ''Payment Inquiry''
END AS TransType,
FirstName AS CustomerName,
TaxId, CONVERT(VARCHAR, DateTime, 103) AS Date, CONVERT(VARCHAR, DateTime, 108) AS Time
FROM #NonFinTran, ' + @ServerName3 + 'Portal.dbo.TB_Branch AS TB_Branch
WHERE
BranchId = TB_Branch.BranchCode
AND (TB_Branch.InstCode IN (''00001'', ''00003'',''001'',''002''))
AND (FromAccountType IN (''SA'', ''CA'', ''FD'', ''01'', ''02'', ''03'')))'
EXEC (@stmt)
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
Anil Kumar

Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.

I am trying to connect to SharePoint in my Office 365 environment by following https://support.office.com/article/Set-up-the-SharePoint-Online-Management-Shell-environment-7b931221-63e2-45cc-9ebc-30e042f17e2c and I am getting:
Connect-SPOService : The Application ID (AppID) for which the service ticket is requested does not exist on the system.
Is there some setting I need to change on the O365 side? Thanks.

Hi,
Based on your description, my understanding is that you want connect SharePoint Online using PowerShell.
Please make sure that the following software is installed.
Windows Management Framework 3.0
SharePoint Online Management Shell
And then, open the SharePoint Online Management Shell and use the Script below to test
whether it works.
$User = "[username]@[tenant].onmicrosoft.com"
$Pass = "[password]"
$creds = New-Object System.Management.Automation.PSCredential($User,(ConvertTo-SecureString $Pass -AsPlainText -Force));
Connect-SPOService -Url https://[tenant]-admin.sharepoint.com -Credential $creds
Get-SPOSite
More information:
http://blog.falchionconsulting.com/index.php/2013/01/using-powershell-to-manage-sharepoint-2013-online/
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Device object not present,restart the system and run setup again????

i install window xp sp2 in my macbook,when i install driver by mac os cd,installation run until sigmatel,it show error,the my mbp will restart automatically,and the driver installion not complete!! i try to install sigmatel idt sound driver manually,when system update the hardware configuration,it show an error message
" device object not present,restart the system and run setup again"!!!! so i can not fully install bootcamp driver in window!
any can help??
macbook pro 13" 2010 mid

Hi:
Your notebook is not supported by HP for Windows XP.
Please read the XP downgrade guide at the link below for instructions on how to get your audio to work in XP.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The specific instructions for your model series can be found in the section titled 3. Difficult Models
Paul

FATAL: Database "myDB" does not exist in the system catalog.

hi there everyone,
just having a problem to create a database in the system catalog.
i am a beginner to JDBC.
i have created a database by using ''create database myDB'' under cygwin (winXP).
but still getting the error.
so am i doing it right??
FATAL: Database "myDB" does not exist in the system catalog.
my java code
String url = "jdbc:postgresql://localhost:5432/myDB";
thx in advance

ok,,, i've solved the problem...
when i '' create database myDB'', it actually crreated ''mydb'' instand of ''myDB'', so myDB does not exist.
also need to connected to mydb not in template1..... stupid me.

Tax code V1 does not exist in the system (T007A)

Hi all,
Need some expert help here. I'm testing this travel management solution provided by SAP. I have configured all so that the functionalities are apparent in the ESS Business package. Unfortunately, when i tried to create a 'travel request' via SAP Portal, i'm getting the error message "Tax code V1 does not exist in the system (T007A)". The error message appears once on review page.
Since this is a Sandpit environment, i believe taht there might be numerous missing config. Can anyone point me to the right direction? Thanks
Regards

Hi All,
Thanks for the quic reply. That solved the problem for travel request. I maintained tax type V1 and N1 and all is good. However, i got another new error now when i try to create my travel expense. After filling up all the necessary info (tested for accomodation booking), i got the following error:
"Entry not found in table T706V. Argument: 14P EUR L 0191520080909"
I went to that table but couldn't make sense out of it. Any pointers please? Thanks
Regards

Trip schema PL does not exist in the system (T706S)

Hi Guru's,
I have configured Travel Management. When saving Travel request tcode - 'TRIP', it gives an error 'Trip schema PL does not exist in the system (T706S) Message no. PTRA_WEB_INTERFACE036'. I have maintained schema for Variant '40' Indian Accounting.
Thanks in Advance.
Kapil Nehra

Hi Kapil,
I am also facing the same problem....Please let me know how u had solved the problem.
Its important.
Thanks
vnk

Trip type does not exist in the system (T702G)

Hi,
In HR - Module - Travel Management.
I am trying to create a travel request for an employee.
i am getting the error message :
Statutory trip type does not exist in the system (T702G)
how to assign the trip type to a particular employee.
regards
sam

If you are applying as employee you need to configure trip schema and single field control for webdynpro provided you are using webdynpro application as employee.
there in the tri provision variant you need to enter the variant you have created.
Under that select the travel planning trip schema PL.
on right hand side you have a field trip schema: statutory where you need to select appropriate schema from drop-down.

What is supposed to happen if the font for a control on the startup form does not exist on the system?

Say you put a button on a form and dont change the font ie ms san serif, then the app is installed on a system that does not have the font ms san serif installed. Is it supposed to throw an error when the form initializes? Since this happens before any user
code the error can go untrapped in the start up form and crashes to the system.
I discovered it does this if you specify the font in the designer to be "Arial Narrow" and it is not installed. But whats funny is the error is not font does not exist, it is "Arial Narrow" does not support style Regular. Even though
I set the font in the IDE for the control. How can I be setting it with the IDE to something that does not exist for the font I set (Arial Narrow is on the IDE system)?
I have always thought that vb would just use a different font if the control font did not exist without an error. In my case it was a secondary form so the error was trapped. But, I don't see how to trap the error if it is the startup form.

PS
"I meant that you should set the buttons font to something like
MS Sans Serif "
What if ms sans is not on the system? Then you cant do anything.
Maybe I am being picky but just sayin...
I don't suppose you're being picky specifically although I think I got a headache attempting to do the below.
I do think this is a bug though which you should probably report.
However I tried this and it worked fine. Except I had to alter the Form1.Designer.vb file to do this. I tested this. I didn't test without this to see if I would get the exception you received.
I downloaded a Font called Kingsthings Christmas from the second link in my post for links to download fonts. Added that to my systems Fonts and tested the code. Removed that from my systems fonts and tested the code. It worked in both instances.
I suspect that the Font in the Form1.Designer.VB file for the New Font for the TabControl and TreeView would work with the default system font set to use 21.75! and font style regular but if the default system font didn't support both of those then an issue
could occur obviously. So if somebody used Control Panel to set the default system font to something that doesn't support those two things then you will need to alter the code to detect what the default system font can use for those two settings
possibly.
Form1's code
Option Strict On
Imports System.Drawing.Text
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.Location = New Point(CInt((Screen.PrimaryScreen.WorkingArea.Width / 2) - (Me.Width / 2)), CInt((Screen.PrimaryScreen.WorkingArea.Height / 2) - (Me.Height / 2)))
TreeView1.BeginUpdate()
TreeView1.Nodes.Add("Parent")
TreeView1.Nodes(0).Nodes.Add("Child 1")
TreeView1.Nodes(0).Nodes.Add("Child 2")
TreeView1.Nodes(0).Nodes(1).Nodes.Add("Grandchild")
TreeView1.Nodes(0).Nodes(1).Nodes(0).Nodes.Add("Great Grandchild")
TreeView1.EndUpdate()
For Each f As FontFamily In New InstalledFontCollection().Families
RichTextBox1.AppendText(f.Name.ToString & vbCrLf)
Next
End Sub
End Class
Form1.Designer.VB files code which you're not supposed to alter of course.
Option Strict On
Imports System.Drawing.Text
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
Partial Class Form1
Inherits System.Windows.Forms.Form
'Form overrides dispose to clean up the component list.
<System.Diagnostics.DebuggerNonUserCode()> _
Protected Overrides Sub Dispose(ByVal disposing As Boolean)
Try
If disposing AndAlso components IsNot Nothing Then
components.Dispose()
End If
Finally
MyBase.Dispose(disposing)
End Try
End Sub
'Required by the Windows Form Designer
Private components As System.ComponentModel.IContainer
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
Dim FontToUse As Font
<System.Diagnostics.DebuggerStepThrough()> _
Private Sub InitializeComponent()
For Each f As FontFamily In New InstalledFontCollection().Families
If f.Name.ToString = "Kingthings Christmas 2" Then
FontToUse = New Font(f.Name.ToString, 24)
Exit For
Else
FontToUse = New Font(SystemFonts.DefaultFont.FontFamily.Name.ToString, 24)
End If
Next
Me.TabControl1 = New System.Windows.Forms.TabControl()
Me.TabPage1 = New System.Windows.Forms.TabPage()
Me.TabPage2 = New System.Windows.Forms.TabPage()
Me.TabPage3 = New System.Windows.Forms.TabPage()
Me.TabPage4 = New System.Windows.Forms.TabPage()
Me.TabPage5 = New System.Windows.Forms.TabPage()
Me.TreeView1 = New System.Windows.Forms.TreeView()
Me.RichTextBox1 = New System.Windows.Forms.RichTextBox()
Me.TabControl1.SuspendLayout()
Me.SuspendLayout()
'TabControl1
Me.TabControl1.Controls.Add(Me.TabPage1)
Me.TabControl1.Controls.Add(Me.TabPage2)
Me.TabControl1.Controls.Add(Me.TabPage3)
Me.TabControl1.Controls.Add(Me.TabPage4)
Me.TabControl1.Controls.Add(Me.TabPage5)
Me.TabControl1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
Me.TabControl1.Location = New System.Drawing.Point(6, 32)
Me.TabControl1.Name = "TabControl1"
Me.TabControl1.SelectedIndex = 0
Me.TabControl1.Size = New System.Drawing.Size(600, 183)
Me.TabControl1.TabIndex = 0
'TabPage1
Me.TabPage1.Location = New System.Drawing.Point(4, 43)
Me.TabPage1.Name = "TabPage1"
Me.TabPage1.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage1.Size = New System.Drawing.Size(592, 136)
Me.TabPage1.TabIndex = 0
Me.TabPage1.Text = "TabPage1"
Me.TabPage1.UseVisualStyleBackColor = True
'TabPage2
Me.TabPage2.Location = New System.Drawing.Point(4, 43)
Me.TabPage2.Name = "TabPage2"
Me.TabPage2.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage2.Size = New System.Drawing.Size(592, 136)
Me.TabPage2.TabIndex = 1
Me.TabPage2.Text = "TabPage2"
Me.TabPage2.UseVisualStyleBackColor = True
'TabPage3
Me.TabPage3.Location = New System.Drawing.Point(4, 43)
Me.TabPage3.Name = "TabPage3"
Me.TabPage3.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage3.Size = New System.Drawing.Size(592, 136)
Me.TabPage3.TabIndex = 2
Me.TabPage3.Text = "TabPage3"
Me.TabPage3.UseVisualStyleBackColor = True
'TabPage4
Me.TabPage4.Location = New System.Drawing.Point(4, 43)
Me.TabPage4.Name = "TabPage4"
Me.TabPage4.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage4.Size = New System.Drawing.Size(592, 136)
Me.TabPage4.TabIndex = 3
Me.TabPage4.Text = "TabPage4"
Me.TabPage4.UseVisualStyleBackColor = True
'TabPage5
Me.TabPage5.Location = New System.Drawing.Point(4, 43)
Me.TabPage5.Name = "TabPage5"
Me.TabPage5.Padding = New System.Windows.Forms.Padding(3)
Me.TabPage5.Size = New System.Drawing.Size(592, 136)
Me.TabPage5.TabIndex = 4
Me.TabPage5.Text = "TabPage5"
Me.TabPage5.UseVisualStyleBackColor = True
'TreeView1
Me.TreeView1.Font = New System.Drawing.Font(FontToUse.FontFamily.Name.ToString, 21.75!, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, CType(0, Byte))
Me.TreeView1.Location = New System.Drawing.Point(9, 229)
Me.TreeView1.Name = "TreeView1"
Me.TreeView1.Size = New System.Drawing.Size(704, 235)
Me.TreeView1.TabIndex = 1
'RichTextBox1
Me.RichTextBox1.Location = New System.Drawing.Point(9, 475)
Me.RichTextBox1.Name = "RichTextBox1"
Me.RichTextBox1.Size = New System.Drawing.Size(702, 124)
Me.RichTextBox1.TabIndex = 2
Me.RichTextBox1.Text = ""
'Form1
Me.AutoScaleDimensions = New System.Drawing.SizeF(6.0!, 13.0!)
Me.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font
Me.ClientSize = New System.Drawing.Size(720, 606)
Me.Controls.Add(Me.RichTextBox1)
Me.Controls.Add(Me.TreeView1)
Me.Controls.Add(Me.TabControl1)
Me.Name = "Form1"
Me.Text = "Form1"
Me.TabControl1.ResumeLayout(False)
Me.ResumeLayout(False)
End Sub
Friend WithEvents TabControl1 As System.Windows.Forms.TabControl
Friend WithEvents TabPage1 As System.Windows.Forms.TabPage
Friend WithEvents TabPage2 As System.Windows.Forms.TabPage
Friend WithEvents TabPage3 As System.Windows.Forms.TabPage
Friend WithEvents TabPage4 As System.Windows.Forms.TabPage
Friend WithEvents TabPage5 As System.Windows.Forms.TabPage
Friend WithEvents TreeView1 As System.Windows.Forms.TreeView
Friend WithEvents RichTextBox1 As System.Windows.Forms.RichTextBox
End Class
La vida loca

Device Id not exists in the system list

Similar Messages

Maybe you are looking for