Device in Linksys Smart Wi-Fi is listed with two MAC address - not correct.

I am using a EA4500 and use Linksys Smart Wi-Fi to manage the device. In the household we have multiple Apple i devices. Somehow the Linksys Smart Wi-Fi combined two separte i devices (iPhone 5 and a 4th generation iTouch) to one user.
The devices actually have different names, but the Smart Wi-Fi is combining them into one device. So I can't use Parental Controls on one of the devices.
I hope you can help me on this. We have made sure both devices have different names.
192.168.1.106
F01:A9:95:67:17
192.168.1.122
88:C6:63:B0:5F:88
Solved!
Go to Solution.

Before you decide to used the classic firmware, I would suggest that to try to manually add your TV under the DHCP reservation of the router's UI.

Similar Messages

  • Hello.  I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster.  This was not correct.  Anyway, I got the device, had problems, did tech support

    I upgraded my MIFI 2200 (had no contract on it) to a Jetpack (with a contract) when customer service told me this 4G device would use less data because it was faster.  This was not correct.  Anyway, I got the device, had problems, did tech support, re-activated my MIFI.  1.  Decided to return the device. Spent hours with Customer Service, then finally up to Management, they agreed to take it back and void the contact, I sent it back immediately – and instead of voiding the contact they transferred it to my MIFI! Please cancel the contract on the MIFI. 2.  During the short time I had the Jetpack I continually received overage alerts, took it all the way up to 30 GB, each time I backdated the new data plan except twice when customer service did and failed to back date the increase, and once the computer locked customer service out and could not increase.  The end result is I have a $495 bill, many of these alerts were false since I ended up with only 14 MG for the month, etc.  I am asking that my bill be reduced significantly to reflect no overage and to compensate for these problems. Please open up a ticket for this.

    I had Verizon JetPak and you will find it will eat data like crazy. I opted to sign on to ATT Uverse and configured my phones and other devices to the WiFi on the Uverse system. It took about 5 minutes to completed the configuration.  I was using 10 to 12 GB monthly to support 5 devices. Even if you use Verizon DSL, you are still subjected to same GB allotment.  In my area, Verizon DSL is not available. With Uverse, I have 250 GB monthly to use, and I have not even come close to using anything of that magnitude. I reduced my GB package with Verizon to 2 GB per month and since having ATT Uverse, I never use more than 1GB a month with Verizon.
    I have no problem with Verizon cell phone service as we get a much stronger signal where we live than you can with ATT or any others.  It is just my opinion, but if you are running multiple devices off Verizon Jetpak, you will eventually spend a fortune to keep pace.  I pay $60 a month for 18 Mbps speed, although ATT have packages that cost much less. But, it saves me a bundle each month. The cost of Uverse alone is worth not having to run everything through a Jetpak.  
    If you have the  option to use another DSL service provider in your area, I recommend dumping the Jetpak and sign on with another carrier.

  • How can I share contact list with another MAC

    How can I share my contact list with another MAC?

    Hi,
    There does seem to be a presumption in the other reply that your girlfriend is living with you.
    A File transfer via Bonjour would then work.
    Also the File Sharing in System Preferences > Sharing would cause her computer to show up on your Finder's side bar as a Share.
    With iChat if you both have AIM Login names you could still do File Transfers.
    (It is slightly more complicated if you have Jabber ID logged in alothough not impossible).
    9:54 PM      Sunday; January 15, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Two MAC Addresses are showing up under one device

    I have an AC1900. My Son and I both have iPad's. In the device list in Smart Wi-Fi, it shows both devices as one. 
    How do I split these out into two devices so I can manage my son's device with parental control?

    Did you confirm that the iPads MAC addresses by looking in the iPads settings?
    Are both the iPads named the same in the device?
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • Find the usage for each device on the router per day or month (megabytes per mac address)

    HI --
    We have a single cable connection and a router network with over 10 unrelated users in our complex.  We want to keep usage fair, the network unstressed and to identify machiines that might have viruses or otherwise be using more than the owner is aware of. We are running a WRT1900AC.
    Does the router itself keep statistics for usage over time per ip/mac address?  If so, how can we access these statistics?  Can the router be instructed to keep this, say in firmware?
    If not is there a program available (free or reasonably cheaply) that can poll the router and produce an estimate of usage? 
    Any advice? 
    Others may wish to know what is going on in their network.
    Many thanks,
    Outis

    The router has an Internet Usage feature in its Network Map. You may use this feature to monitor the bandwidth consumption of each device. Check this link:
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=29285

  • Select list with bind variable does not work

    Hi,
    What can be wrong with a 'select list' with the a simple select
    select omschrijving o, id i
    from basiscodes b
    where domein = 'OPTIES'
    and b.id in
    (select eo.basiscode_id from evenementen_opties eo
    where eo.event_id = :P16_ID)
    The :P16_ID has a value and should give result
    But it does not work at all with 'select list'
    Using the POPUP LOV (display discription, return key value) works nice
    The select retuns less then 10 records

    Hi Flavio,
    As I explained, the P16_ID is an item of the master page (page 16)
    In Page 18 where I want to reuse that value, the item is not there, but I use it to assign
    P18_EVENT_ID with the value in P16_ID and that works fine.
    In an after submit process, I do this :
    declare
    function get_pk return varchar2
    is
    begin
    for c1 in (select EVENEMENT_INSCHRIJVING_SEQ.nextval next_val
    from dual)
    loop
    return c1.next_val;
    end loop;
    end;
    begin
    :P18_ID := get_pk;
    :P18_EVENT_ID := :P16_ID;
    :P18_CREATIE_DT := TO_CHAR(SYSDATE,'DD-MM-YYYY HH24:MI:SS');
    :P18_CREATIE_USER := APEX_APPLICATION.G_USER;
    end;
    The value P16_ID is there before I open page 18
    I made a display item that displays the value P16_ID
    If I change the LOV select in :
    select b.omschrijving o, b.id i
    from basiscodes b
    , evenementen_opties eo
    where b.domein = 'OPTIES'
    and b.id = eo.basiscode_id
    and eo.event_id = 16
    then it returns the value I want : 1 record
    You see, I'm a really new one in apex.
    Forms 6i was easier for me...
    Regards Jules
    null

  • Vendor list with their mail address

    HI experts,
    I need a report which gives list of vendors in our plant .
    in that it should give Vendor Name,Vendor Number and Email address.
    I tried with MKVZ and LFA1..but not able to find.....
    Please guide me in this.
    Thanks
    MK

    hi
    Also if u do not want to create Query
    Extract both tables in excel
    with reference to address number ( which is common in both tables ) put simple
    v look up formula so that u will get email address in LFA1 excel sheet
    ( <b>Note that address number is common link betn two tables</b> )
    some usefull info i found on <b>SDN</b> about creating query
    check if usefull
    User T-code: SQVI
    Enter your "query name" and press"create"
    Enter title
    In Data source " select Table join"
    select basis mode and press continue.
    Press Insert table and give the tabes one by one.
    Drag the parameter and drop in another table to establish link and link all the tables.
    Press check to check whether your link is correct, then press back
    You will be able to see the tables and fields on left hand side.
    Select the appropriate parameters for selection fields and list fields
    Selection fields- For selection of data, the initial screen of report.
    List fields are nothing but output.
    Execute the report.
    You will find the initial screen of report.
    Give your parameters for output and execute again.
    You will receive the desired output.
    You can down load the output in spread sheet/ in the format desired.
    At last save your query before coming out of transaction
    Vishal..

  • Check Deposit List - cannot post Processing status not correct

    Hi Expert,
    I was trying the edit a check deposit list and I encountered error message during save.
    "Cannot post. processing status not correct."
    Procedure: Go into statement/list processing and save again. The processing status is then changed to 3 (revised).
    How to go to statement/list processing to change to status to 3?
    thank you

    Hi,
    Use T Code FF67,
    Select the Check deposit list and click enter. Now go to Settings > Specifications
    Here you will find the "Processing Status" for you to continue.
    Regards
    AKV

  • Down List With Multiple Email Addresses

    I have created a form with liveCycle Designer which requires users to choose a email address from a drop down list. How I can submit the completed .pdf form to the specified from the list drop down email address.
    Thanks

    Hi Paul,
    This worked great! I used it in LiveCycle Designer for an electronic time-off request for our field sales. They fill it out then the submitt button in their section sents it to their supervisor for his digital signature. The supervisor's section has another button that sends the form to me and HR. They love it.
    I'm a newbie with this and really appreciate the help. Thanks much.
    Barb

  • Lightweight AP authorization lists: Which AP MAC address to specifiy - AP Ethernet or AP Base Radio?

    I'm trying to use the AP authorization list feature on a lightweight access point controller, and am hoping someone can clarify when specifying the MAC address of the AP along with the certificate type should the AP Ethernet MAC be used or the AP Base Radio MAC be used? 

    Ethernet MAC.

  • How do I set up a distribution list with multiple email addresses?

    I can't figure out how to do this - I am a .mac member and really have no idea how to use the desktop mail function but I am assuming that I need to set up the distribution list in mail since I can't find anywhere to do it on .mac.
    I am really sorry for this lame question - is it a problem with my ISP (sbc) or is it my operating system - 10.3.9?

    Welcome to the discussions, CassC.
    You may need to re-post in the pre-Tiger mail forum.
    But what I THINK you need to do is use your Address Book, and make a group. Add to the group (by selecting, dragging and dropping) the contacts you need in the distribution list. Now in Mail use the name of the group in the To: or Cc: or Bcc: field to send them all mail.
    AK

  • Lightroom not showing up in Creative Cloud "your apps" list with others, thus is not updating

    I use several Adobe programs, among them Lightroom. However, in my Creative Cloud window, accessible in the header bar on my desktop, the other apps show up under "Your Apps", but not Lightroom 5. Therefore, it is not updating to 5.2. How can this be remedied? I've tried updating it manually, but it was unsuccessful.
    (Also, is there ANY phone or email tech support with an Adobe application support employee? I cannot find either, which is frustrating being a paying monthly member.)
    Thanks!

    Justimy are you stating you are unable to see Lightroom listed in the Creative Cloud desktop application?  Is so please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to restore Photoshop Lightroom as being listed.
    Please do be aware that this will not affect the Photoshop Lightroom 5.2 update being available.  You will want to trigger the Lightroom update from within the Photoshop Lightroom application.  Photoshop Lightroom utilizes different technology than the majority of the Creative Cloud application offerings which is why it is necessary to utilize a different workflow to obtain the update.
    Finally you are welcome to contact our support team at http://adobe.ly/yxj0t6.  You can also find the support options available for your country/region at http://helpx.adobe.com/support.html?promoid=KAWQK.

  • Attendance list for courses, report RHXTEILA_LSO not correct.

    The attendance list of courses report (RHXTEILA_LSO) is not displaying people if they were in a  department/service/team that his since been delimited.
    Has anyone else come across this problem?.
    Jason

    Jason,
    If Org. Unit was delimited, you should see the "Org. Assignment" field blank.
    Please check your filters, be carefull with dates, and also check using standard report by checking "standard selection screen" (RHTEILN0_LSO report).
    Tell us the results. Regards!

  • ALV List with two rows of heading

    Hi All,
    I am working on ALV list display. I have six columns of heading in my ALV. Out of the six columns i need to display five columns in the first row and the sixth heading will be in the second row first column.
    Ex:
    A  B  C D  E F
    G
    I need to display a row of values for Column G for every row of A,B,C,D,E,F.
    How is this possible with ALV list display.
    Ex.
    A     B     C     D      E     F
    G
    v1A  v1B  v1C  v1D   v1E  v1F
    v1G
    v2A  v2B  v2C  v2D   v2E  v2F
    v2G
    v3A  v3B  v3C  v3D   v3E  v3F
    v3G
    Looking forward to ur reply.
    Regards
    Ramanan

    Hi,
    You can use a hierachial list to display your output as required.
    You can check the example program BCALV_TEST_HIERSEQ_LIST.
    Regards,
    Ankur Parab
    Edited by: Ankur Parab on Jun 15, 2009 12:33 PM

  • How to get PO list with mark archived or not?

    Hi experts,
    I have a list of POs from both database and archive server using standard report ME2N but I can't distinguish between archived PO or not.
    Actually if I checked the detail PO I could see if it was from archive or not, but this way takes time.
    Please advise how to get list of PO with mark from archive or database.
    Thanks.
    rob

    hi
    u can use me82
    or in me2n us the scope as ARCHIV
    regards
    kunal

Maybe you are looking for