Device is not iPhone compatible
My son's 4gb iPhone gives him the prompt as if he's connected to a device that's not iPod/IPhone compatible and offers the option of switching to airplane mode. This is all while the phone is in his pocket at work. All the while, the phone will not shut off. I recommended a reset and dumping cookies and cache which halted the problem for a couple of hours. Now, the punch line. This is his 3rd time, this same, identical problem with 3 different phones. If he sends this one in (as he has all b4, Apple has made them all good!) this will be his 4th phone since last September. What gives folks?
I have had this problem. Here is my story:
I tried and successfully cleaned out the lint. however it did not fix the problem.
taking the iphone to the genius bar was the solution because they took a hard look at the connector and realized that it was a corrosion causing the problem ( water damage probably caused by my baby always trying to eat my phone). The genius tried cleaning off the corrosion. again, unsuccessful.
Solution: Free - iPhone replacement, as it was still under warranty. so there it is, this topic can be considered answered if you have tried the lint cleaning and perhaps scrubbing the connector with a toothbrush and doing an air blow and there is no change in behavior. then you can get it replaced.
Similar Messages
-
I was trying to rent a Movie on the itunes store and it had an error message saying my device was not HD compatible.
I had the same problem on my fancy new retina display macbook pro. It appears that if the last device you watched a movie on was not HD compatible (e.g. my old Apple TV at 720P) it will give you this error, even though you intended to watch the movie on your laptop. Just go to the output selector button next to the volume slider and select your computer as the output device, then retry to download the HD movie and it will work. My Apple TV was (literally) thousands of miles from my laptop when it gave me this error. Software glitch.
-
The Bluetooth low energy protocol is not backward compatible with classic Bluetooth protocol.
My iPhone 4s can not find my sonny in-dash player. However my iPhone 3GS does it. Very disappointed with this.
Any idea how it can be fixed??????Hello,
You are correct, Blue tooth low engergy, BTLE.(only) devices are not backward compatible with Classic bluetooth and cannot connect.
However the Apple 4S and above have Bluetooth 4.0 support.. Hardware wise it has bothClassic Bluetooth, like the 3GS, as well as Bluetooth Low Energy. There is no good reason why your 4s cannot communicate to your Sony in-dash player using the Classic bluetooth that resides in the 4S.
I know that this does not answer the why it does not work, but it should work. Do you have to somehow re-pair the new phone up to the player? Not knowing the model of the Sony it is hard to investigate.
And I hate to ask but are you sure that the Bluetooth radio is on in the phone?
JT -
How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?
This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.
-
HTML5 Courses still not fully compatible on iPad or iPhone
Hi,
I've created several courses in Captivate 7, and using the HTML5 tracker, I've made sure all the elements in the courses are HTML5 supported. After publishing the courses and putting them in the LMS, I've tried using them on my iPhone and iPad, and I keep getting a warning message (all the courses work fine on my Mac). The message says:
"This course is not fully compatible with your current device. You may encounter problems with some lessons."
I can open the courses fine, and can navigate through them, but I'm not sure what parts are not compatible. I found one video that's not working, and it seems that the quiz questions aren't working. Otherwise, they seem to be functioning fine.
Any ideas or insight would be appreciated!Can you tell me what the "ini" file is? The warning seems legitimate because the quiz questions aren't working on the iPad or the iPhone. So it seems like more than an automatic error message.
-
im trying to update to newest ios version. but during the proccess, an unknown error accured, now the device wont do anything, just shows the plug into itunes screen. the device does not show in windows or itunes. the iphone wont do anything. i tried restarting, it shuts off and back on, but only shows plug into itunes thing. any ideas?
From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod? -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
I purchased a Holux M-1200E Bluetooth GPS Data Logger. The device paired with my laptop just fine so I know it is working right. The device will not even show up on my iphone or ipad to pair via bluetooth. Is there a way to pair without jailbreaking??? I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!! Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized??? I love my apple devices, but this is very frustrating. I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!! I am hoping apple will help me!!!
Thanks,
Melissamelissafromlenexa wrote:
That is not the right device, it is the
Holux
M-1200E Bluetooth GPS Logger
I looked at the same sight for that and it does not say that. This is the first time I have posted a question, you don't have to be mean about it. I am trying to get this to work for a good cause.
It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that. -
Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?
Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device. -
How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes. This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.
Hi Celia51510,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
I can't tell from your post if you are using a Windows or a Mac Computer.
Try deleting the iTunes application and redownloading the version you need below:
iTunes 11.1 Download for Mac
http://support.apple.com/kb/DL1614
iTunes 11.1 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Cheers,
- Judy -
when I plug my iPhone in to my computer, iTunes doesn't recognize it as a device. I have deleted and re-downloaded iTunes twice which seems to fix the problem temporarily but then the next time I plug my phone in, the device is not recognized.
What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac -
when connecting the iphone to the pc to upgrade my OS itunes says "the iphone cannot be used because the Apple Mobile Device is not started" can someone help me please
http://support.apple.com/kb/ts1567
-
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
i have a htc wildfire, and if i try to install firefox from android market place it says that my device is not compatible with firefox. how can i install it ?
According to a random website... the HTC Wildfire S uses a Qualcomm MSM7225 processor. This processor unfortunately does not support the full ARM version 7 instruction set, so Firefox cannot run on it.
-
When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?
iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538
Maybe you are looking for
-
When I close my Mac Book when its on a- The display won't turn back on whe-
When I close my Mac Book while it is on and leave it on while closed for long periods of time and then I open it, the display will not turn back on- why?
-
Sending WSSE security headers to non-weblogic web service
I have been trying to send wsse headers to a non-weblogic web service. I am looking for a way to do this using the control file I generated from the wsdl or the page flow where I implement the control, or the message handler file. I have username and
-
Hi, my google search has always worked perfectly but recently it is just giving a page of random characters. This happens both on the quick search icon and from google.com. Google is still working fine using Safari? e.g. ‹ÿÔ}k{Û6Òè÷ü †Þ:RCѤ.¶,…ÉIšK»
-
Setting in Order Type Dependent Parameters
Hi Gurus, Can anyone tell me the importance of Setting in Order Type Dependent Parameters ( T.Code OPL8) - setting of purchase requisitions - Reservation / purchase requistion - 1, 2 or 3. What is the significance? Srini
-
How to make white part of gif file transparent?
I have an icon and I would like to change the color of its white part by changing the background color. If I could set the white part to be transparent I could do this. Any ideas how this can be done?