Device keep turning plain and displaying App error 602

Dear Sirs,
My BlackBerry  Curve 9300 is not functioning properly any more after i made BlackBerry ID on my PC to connect the device with the PC.  The device turning plain and displaying App error 602
Could you please help me
Thank You in advance
Abdi Halim Musa

Hi Abdi Halim
This Knowledge Based will guide you to solve that problem: "App Error 602" appears on the BlackBerry smartphone or "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7
Good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

Similar Messages

  • Hello everyone, I have an iPhone 4 and it keeps turning on and then off continuously. I put it in recovery mode and i try restoring it but it wont work it just says error 21. If there is any way to fix i would like if you post it, thanks

    Hello everyone, I have an iPhone 4 and it keeps turning on and then off continuously. I put it in recovery mode and i try restoring it but it wont work it just says error 21. If there is any way to fix i would like if you post it, thanks

    If using windows...
    Temporarily disable your firewall and antivirus software and try again...
    http://support.apple.com/kb/TS1379
    See iTunes Connection Issues here...
    iTunes for Windows: Troubleshooting security software issues
    Etrane wrote:
    ... it just says error 21. ...
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers.

  • "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

    "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

    "KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

  • HT1766 my backup is failling to restore and displays an error message: backup either corrupt or not compatible with the device. This happened after updating to the latest software IOS7

    My backup is failling to restore and displays an error message: backup either corrupt or not compatible with the device. This happened after updating to the latest software IOS7

    I have the same issue and I KNOW my backup IS good. What happen is when you try to restore your phone apple says something like can I check for new updates and if you choose no, it just takes you back to the restore screen and a loop from then on.  If you dont update from you phone then when you back up you will have the 5.0.1 back up and then when you update to 5.1.1 and then try to restore the backup from 5.0.1 it say it EITHER corrupt or incompatible.. It is incompatible and its hard as **** to restore back to 5.0.1. I followed the restore to a T and still getting errors. I lost all text history and have to reset up email. All just because I wanted a 1.2 Gigs of "other" space back.

  • Iphone keeps turning on and shutting off 3 mins later

    I wanted to find out how i get my Iphone 3g to stop turning itself on and off. I updated it a few days ago and haven't had any problems with the phone until now. I have the diaganostic is supposed to be sending data to Apple but i don't know what to do with the problem. I have left it alone to gain a full charge but it still keeps turning off
    i get an error message of  the date and "panic.plist" "log-aggregated" and "Reset Counter"

    It is toast
    Apple Genius bar will exchange for an Out of Warranty identical device
    Price based on the donor
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149

  • My phone keeps turning on and off. It hasn't been wet or anything., My phone keeps turning on and off. It hasn't been wet or anything.

    My phone keeps turning on and offf

        Hey johneigh1!
    A power cycling phone sure can get old really fast so please know I'm ready to find the perfect solution to keep it on until you say otherwise. At this point, I'm very glad to know that you've gone through with some troubleshooting including a master reset but I've got an idea for something else we can try that should help.
    Have you tried putting your phone into safe mode http://vz.to/ruJiUa ? This will allow us to isolate the issue to either the device itself or potentially an application. Please try this tactic and let us know how it responds. If all goes well while in safe mode, there may be an app that we'll want to get rid of.
    EvanO_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

    After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

    Yes, you will still get the prompt.
    I meant reset then try the recovery mode restore again.
    You can also try DFU Mode.
    DFU (Device Firmware Update) Mode is different than Recovery Mode.
    DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot bootloader.
    DFU Mode:
    Plug your device into your computer.
    Turn off the device.
    Hold the Power button for 3 seconds
    Hold the Home button without releasing the Power button for 10 seconds
    Release the Power Button but keep holding the Home button
    Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
          NOTE: Make sure the device screen is blank and no logos are present. Be patient, it make take several trys.

  • I get a white screen with blue streaks?  Keep turning on and off until it disappears.

    I get a white screen with blue streaks?  Keep turning on and off until it disappears.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have an ipod 3 and it keeps turning ok and off on full battery. I literly charged it till it was full turned it on for a mintyte then it drained within that minute and died!!! What do i do???

    Hi i have the ipod 3 and it keeps turning on and off. I literly chatged it till it was fill, turned it on, played with it for a minute then it was on red and it died ten turned back on said it was full then a sec later on red then died!!! Why does this keep happening?!?!?

    You can try the following expect that I think you have a hardware problem and the Genius Bar is your only choice.
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.                     
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price

  • HT1414 hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me icannot get my

    hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me i cannot get my iPhone turn on

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • How do I fix my iPhone 4 that's keeps turning off and on

    My phone keeps turning off and on. It will show the boot logo and it will dim like its going to the lock screen, but then it will show the loading wheel when turning off. Then the process repeats. I trued restoring but in recovery mode its gets error 21 at the step of getting iPhone ready to restore. Then I tried to do it in DFU mode and it gets stuck in waiting for IPhone. I have tried changing cables that hasn't really worked and I tried updating everything. Please help!!!!!!

    Sounds like you have a hardware problem. Take it to an Apple Store for evaluation.

  • My iphone keeps turning off and powers itself again

    my iphone keeps turning off and powers itself again

    Hello dantecruso,
    Thanks for using Apple Support Communities.
    There are some troubleshooting steps I'd like you to follow in the article below in order to resolve this issue you're experiencing.
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Take care,
    Alex H.

  • I dropped it in the toilet and it keeps turning on and shutting off. after blow drying it. and hooking it up to the charger.

    I dropped it in the toilet and it keeps turning on and shutting off. after blow drying it. and hooking it up to the charger.

    It is toast
    Apple Genius bar will exchange for an Out of Warranty identical device
    Price based on the donor
    Out-of-warranty repair service
    If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
    Read Apple’s Repair Terms and Conditions
    Model
    Out-of-warranty service fee
    Battery service*
    iPhone 6 Plus
    $329
    $79
    *available only if battery
    fails Apple’s diagnostic test
    iPhone 6
    $299
    iPhone 5s, iPhone 5c, iPhone 5
    $269
    iPhone 4s
    $199
    iPhone 4, iPhone 3GS, iPhone 3G,
    Original iPhone
    $149

  • My ipod keeps turning on and off

    My ipod keep turning on and off

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                                              

  • HT1414 my iPad doesn´t work, I already restarted it, the screen keeps turning on and off, and I can´t see anything o work on it, what else should I do?

    my iPad doesn´t work, I already restarted it, the screen keeps turning on and off, and I can´t see anything or work on it, what else should I do?

    First lets assume you battery is completely or almost completely drained.
    Plug the iPad into the charger that came with it and plug that into a known good wall outlet. Leave it alone for at least an hour. Then, while it is still plugged in reset the iPad. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. If the iPad starts and seems to be ok let it continue to Harte until the battery is fully charged.
    If this doesn't solve the problem I suggest having an Apple technician take a look at your iPad. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Maybe you are looking for

  • The Crystal Report (CR) add-on  SAP 8.8

    Hello everyone, were can i finde the The Crystal Report (CR) add-on  2008  for SAP 8.8 or is this the same like the Add On for SAP 2007? Is there such a Add On for 8.8 ? Thanks and regards, Indira

  • DP Disaggregation and Aggregation levels

    Hi all, I have a question regarding disaggregation and aggregation levels. KFu2019s and disaggregation setup: KF001: Calculation type: I (not relevant) Disag. Key Fig.: KF000 (not relevant) Time-Based Disaggregation: K (not relevant) Time-Based Disag

  • Subreport based on stored proc - parameter problem

    Hello all, I have a problem to link formula field from main report to parameter in subreport. My subreport based on stored procedure with 3 parameters: month, year, typeID. I have 2 parameters in main report: month, year and they linked to subreport'

  • Embedding background image within a svg map

    Hi Iam using mapviewer to generate and store maps. The maps also have aerial photographs attached as a background image. currently the image is a link and the actual image is stored on the mapviewer server. I want to be able to embed the image within

  • ArcGis dosen't run on Satellite C660

    Load ArcGis AOK on win7 64bit Satellite Laptop. Authorise Licence for single user AOK When I run ArcMap get ArcGis has encountered a serious application error and is unable to run. Note this is happening on another laptop same configuration