Device List - Multiple Devices
I've been watching my device list lately and I've seen a number of listed online devices that I do not recognize and the ones that I do are no where in the area for them to be even connected or trying to connect. For instance, my daughter's iPhone is listed as online and I know she's not at home or in the area for it to connect because she's at work and has her iPhone with her. I have MAC filtering tuned on and only allow certain listed MAC addresses to access the router. Why would those online devices be there when they shouldn't. I also tried restarting the router as well as refrehing the device list and they keep reshowing up. Can "spoofing" those MAC addresses actually occur and if so, how, since I have MAC filtering turned on. Any advice would be greatly appreciated. Thanks!
What's the model number of your SmartWifi router? It could be that the Device List did not sync well with the router. I suggest that you upgrade the router's firmware and reboot the router to refresh the settings. Using DHCP reservation to all client devices will also help.
Similar Messages
-
Several music albums listed in my IPhone 5 music library are listed multiple times, but each one only has a portion of the songs listed. How can I combine them to make one album?
First....Thank you so much for your prompt reply. I am sorry for not getting back to you regarding your suggestion-I had computer issues that just got resolved. Also, this is my first foray into online chat rooms so I have a lot to learn to precisely state my issue! I did as you suggested and all the songs list the same album when I go into each song's "get info". However, I am not sure how to edit as you suggested. When I downloaded this album originally, for some reason it broke up into several albums each with different songs from the original album. I am trying to consolidate them back into one album in my library. I would greatly appreciate further assistance if you can. Also, I do not use "the cloud" to store any data and would like a good source of info on how to do this. Thanks so much for your patience!
SueZoo -
Sorry this will appear pretty basic stuff. I have ripped all my Cds into iTunes, but in starting to make playlists it is apparent that some artists are listed multiple times as they appear with different bands, and others do not appear at all. I have tried searching different categories, compilations etc, and Finder box does not bring them up.
My questions are:-
Do I need additional software to manipulate my tunes in iTunes?
If so what is suggested?
or if not:-
How can I re arrange the tunes so that they appear only under one artist?
How do I make my "lost" artists tunes appear?
Thanks for any advice.I am not really following what the problem is here. Artists are listed in the Artist field. I guess you could stick individual artists in a band in a field such as comments, but then you would have to include searching the comments field in your search. In which fields are these names located?
How are you making these playlists? Are these smart playlists or are you just dragging tracks to a playlist?
Are you doing this search with Finder's find or with iTunes' search?
If I knew exactly what it was you were trying to do I could tell you if you need addditional software. In reality though there isn't "additional software" for iTunes. There's Applescript plugins but I don't see how the ones with which I am familiar would have anything to do with searching for artist names.
How can I re arrange the tunes so that they appear only under one artist?
Steve MacGuire aka turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message.jspa?messageID=9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields. -
TS3988 How do I create a List (multiple recipients) for my iCloud email?
What steps must I take to create a List (multiple recipients) for my iCloud email? I will be corresponding with a fied group of contacts over the course of a 3-month project. I need to create a List/Alias that will send the same message to some 18-20 members of this group in a single email exchange.
lets try this again. A PST file is an outlook file. Thunderbird does not and never has created them.
https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/
Use the add-on to export your mail as EML. This is a fairly standard format that just abut any mail client can read. Except Outlook. -
Trigger List.Select_Command for List.Multiple By Using J2ME
I have some questions regarding the menu button. Since I'm unable to disable it, so I'll be using List.Multiple to allow the user to have their multiple selection. Unfortunately, List.Multiple is unable to trigger 'List.SELECT_COMMAND' as this command is only applicable for the 'List.IMPLICIT'. Is there any ways to trigger the 'List.SELECT_COMMAND' as I need to determine the no. of selections? Can we disallow the user to have more than a certain no. of selection? Please advise
I have some questions regarding the menu button. Since I'm unable to disable it, so I'll be using List.Multiple to allow the user to have their multiple selection. Unfortunately, List.Multiple is unable to trigger 'List.SELECT_COMMAND' as this command is only applicable for the 'List.IMPLICIT'. Is there any ways to trigger the 'List.SELECT_COMMAND' as I need to determine the no. of selections? Can we disallow the user to have more than a certain no. of selection? Please advise
-
[svn:fx-trunk] 11286: Small fix to List multiple selection commit.
Revision: 11286
Author: [email protected]
Date: 2009-10-29 16:59:07 -0700 (Thu, 29 Oct 2009)
Log Message:
Small fix to List multiple selection commit.
Problem: Dispatching programatically mouse_down event to the item renderer would not put it in the selection.
Reason: commitSelection() was getting called twice, once through ListBase.commitProperties() and a second time through List:commitProperties()
Fix: Clear the multipleSelectionChanged flag inside commitSelection() to prevent it from being called twice.
QE notes: None.
Doc notes: None
Bugs: None
Reviewer: Glenn
Tests run: checkintests, mustella (List)
Is noteworthy for integration: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.asYou have used elements like header, footer, footer1 and nav without using the correct DOCTYPE declaration. Replace the first line of your code with
<!doctype html>
Also have a look here for other problems http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fhome.surewest.net%2Fstorytales%2F test%2Fforposting.html
After the above has been fixed, please come back here to fix the remaining problem(s)
Gramps -
Artists names listed multiple times
On my ipod i have two artists whose names are listed multiple times.
When I connect my ipod to the computer the songs are listed only once, but on the ipod the songs are re-listed each time the artists names are shown. it lenghtnes the artist list tremendously. any thoughts?A spelling or punctuation mistake, or sometimes a trailing space usually causes this after the artists and/or song name, which fools the iPod into thinking that there are two different artists or songs. The trailing space is the hardest to spot.
Best way to cure this is to go into iTunes, highlight that artist and/or songs, right click on them and select "get info".
This brings up the multiple song info window. If you see the "artist" field is left blank, then there is a discrepancy with that name.
So to correct this, in the artist or song box retype the name, as you would like it, and then click ok. You should do this even if no mistakes are immediately visible.
Re sync this new artist/song info to your iPod.
If the above is not the issue, try this also. Highlight all the songs for that artist, right click on them and select "apply sort field/same artist".
See if that works. -
I just got the 120 gb iPod Classic (I was using the 5th Gen. 30 gb video before) and when I finally got it to sync I saw that some of my albums are listed multiple times on the iPod...it's weird because they aren't listed that way on iTunes...ant suggestions?
Excuse the long post, but hopefully covering all the bases (that I can think of) will help you fix the other issues you are likely to run into as you try to organise your library.
*Use an album friendly view*
iTunes will let you sort music on many columns, some of which are unlikely to group albums together. The most useful order for editing the library is *Album by Artist*. If you're not already there, select the list view and click on the column heading for Artist until it reads Album by Artist.
*One cover, too many tracks*
The iPod (and iTunes to a lesser extent) conflates two or more albums with the same title, most obviously with *Greatest Hits*. On the iPod this can result in one album acting as a combination of two or more. Selecting any cover gives all the tracks of all albums with the same title. The workaround for this "Greatest Hits" bug is to give each album a unique title - I tend to go for *Album - Album Artist* as this reads clearly in the iTunes browser. Alternatively you could use the wording as it appears on the cover, append different numbers of spaces for each different album or set different values for the Sort Album.
*Album not with others by same artist*
iTunes relies on the Gracenote CDDB database when identifying CD's. This often marks collections or anthologies of an artist's work as a compilation. In iTunes, however, the compilation flag has the logical function of grouping together tracks with the same album name, but different artists on each track, e.g. "Now That's What I Call Metal 666!". These compilations are then all grouped together at the end of cover flow. Most of us however, would expect "Greatest Hits" albums to be listed with the other albums by the same album artist. For albums which are essentially by a single album artist or group it is best to set the appropriate value for the album artist and clear the compilation flag.
*One album, too many covers*
Sadly the iPod ignores the Album Artist field when grouping albums which causes problems when some tracks list guest artists. You can simply mark the entire album as a compilation which seems to be the way iTMS handles it, however that's not an ideal fix. Short of waiting for Apple to address this issue (and as far as I can tell it goes back to the 1st gen. of iPods) we need a workaround. What I do is to put any additional artist info. in square brackets after the song name. E.g. *Track \[Feat. Guest\]* and then set *Artist=Album Artist* for each track. For anthologies where the Album Artist is credited as part of another group, e.g. for Cream tracks on an Eric Clapton anthology, I use *Track \[As Group\]*. For a track where the main Album Artist doesn't receive a credit, e.g. the first track of the Slim Shady LP credited to Jeff Bass, I just set the track name to *Track \[Guest\]* while still setting the artist to the album artist. N.b. I use square brackets to indicate this is not part of the actual song title and also use this style for Mix/Live/Bonus info.
*One album, still too many covers*
iTunes may split albums into two or more sections if some tracks from the album have different values for Artist, Album Artist, Album, No. of Discs or Part of a Compilation. Tiny differences such as trailing spaces, accented characters or variants of symbols can sometimes be quite hard to spot. The iPod is also more sensitive to case variations and may split or reorder an album that looks okay in iTunes. Normally overtyping the desired value for each shared field will complete the grouping of the album into one entity. Occasionally, however, this method seems to fail. When this happens I've found that you can force every field to update properly by adding some extra text - e.g. a trailing X, which once applied seems to complete the joining of the tracks into one album. Once this has happened the extra data can be removed and the album should remain properly grouped.
*I've tried that, there are STILL too many covers*
The Sort Artist, Sort Album & Sort Album Artist fields can be used to override the normal sort order. For example iTunes automatically drops leading prepositions (a/an/the) so "The Beatles" are arranged under "B" instead of "T". Occasionally different tracks from the same album can have different values in these sort fields which can also break up the grouping. Making the sort columns visible in iTunes can help with spotting & correcting such problems.
*One cover for multi-disc albums*
Multi-disc albums are often listed as *Album (CD1)* for CD 1, *Album (CD2)* for CD 2 etc. To display these properly using just one cover, each disc should hadve the correct *Disc X of Y* values set, and then the entire album should be given the single title Album. Being somewhat obsessive I also renumber the tracks sequentially, working backwards from the last track until I reach disc 1.
*One artist, many names*
With some artists, particularly classical composers, you should be aware of alternative representations of their names. E.g. 2Pac vs. Tupac. The menus will work best if for each artist you standardise on just one form of their name. E.g. make a choice between Mozart, W.A. Mozart or Wolfgang Amadeus Mozart, and then apply it consistently. For classical music I tend also to use the Composer as the Artist & Album Artist and either discard the performer details or place these into the Comments field.
tt2 -
Why are my appointments listed multiple times?
Why are my appointments listed multiple times?
I noticed this today but I didn't even use outlook. I made all appointments in EST/EDT. Currently I'm on a business trip in Poland and all the times changed 6 hours ahead (the time zone in poland)... so now while planning things back home, everything is screwed up because I thought my appointments were 6 hours later then they were...
This is a HUGE issue.... this will cause major headaches for business travelers and needs to be looked at ASAP. But I can't even find a way to file a bug report with apple and let them know. Not impressed one bit with this. -
Hi,
I wish to know how do I append datas dynamically using jsp into a list. a multiple list. ? Is it possible? I have a jsp page with connection to my mysql server which I call using the httpconnection and I would like to append each data eg: option 1, option2, option3....
I manage to put into string and append it into a textbox but how to go about appending it to a multiple list? Is it possible.
Please advice as I am very desperate. Thanks in advance. ( see codes below)
Howie C.
connectmidlet.jsp
<%@ page language="java" import="java.sql.*" %>
<%!
String name;
String Shows;
String Time;
String conn;
%>
<%
name = request.getParameter("name");
out.println("Hello "+name+",");
Class.forName("org.gjt.mm.mysql.Driver");
conn = "jdbc:mysql://localhost:3306/fyp?user=root&password=";
Connection Conn = DriverManager.getConnection(conn);
// query statement
Statement SQLStatement = Conn.createStatement();
// generate query
String Query = " SELECT * FROM schedules ";
// get result
ResultSet SQLResult = SQLStatement.executeQuery(Query);
while(SQLResult.next())
Shows = SQLResult.getString("shows");
Time = SQLResult.getString("times");
out.println("Show : "+Shows+ "\n"+ "Time : " + Time+"\n");
// close connection
SQLResult.close();
SQLStatement.close();
Conn.close();
%>
ReminderMIDlet.java
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
import javax.microedition.io.*;
import java.io.*;
public class ReminderMIDlet extends MIDlet implements CommandListener {
Display display = null;
// name field
TextField name = null;
Form form;
String url = "http://localhost:8080/test/connectmidlet.jsp";
static final Command callCommand = new Command("Connect", Command.OK, 2);
static final Command clearCommand = new Command("clear", Command.STOP, 2);
String myname;
public ReminderMIDlet() {
display = Display.getDisplay(this);
name = new TextField("Name:", " ", 25, TextField.ANY);
form = new Form("Reminder MIDlet");
public void startApp() throws MIDletStateChangeException {
form.append(name);
form.addCommand(clearCommand);
form.addCommand(callCommand);
form.setCommandListener(this);
display.setCurrent(form);
public void pauseApp() {
public void destroyApp(boolean unconditional) {
notifyDestroyed();
void invokeJSP(String url) throws IOException {
HttpConnection c = null;
InputStream is = null;
OutputStream os = null;
StringBuffer b = new StringBuffer();
TextBox t = null;
// list of choices
//List t;
//String [] options = {b.toString()};
try {
c = (HttpConnection)Connector.open(url);
c.setRequestMethod(HttpConnection.POST);
c.setRequestProperty("User-Agent","Profile/MIDP-1.0 Configuration/CLDC-1.0");
c.setRequestProperty("Content-Language", "en-CA");
c.setRequestProperty("Content-Type", "application/x-www-form-urlencoded");
os = c.openOutputStream();
os.write(("name="+myname).getBytes());
os.close();
is = c.openDataInputStream();
int ch;
while ((ch = is.read()) != -1) {
b.append((char) ch);
System.out.print((char)ch);
t = new TextBox("Schedule", b.toString(), 1024, 0);
//t = new List("Choose Time",Choice.MULTIPLE,Shows,null);
//t.append(b.toString(), null);
//t.append("time", null);
//t.append("show", null);
//t.append("time", null);
//t.setCommandListener(this);
} finally {
if(is!= null) {
is.close();
if(os != null) {
os.close();
if(c != null) {
c.close();
display.setCurrent(t);
public void commandAction(Command c, Displayable d) {
String label = c.getLabel();
if(label.equals("clear")) {
destroyApp(true);
} else if (label.equals("Connect")) {
myname = name.getString();
try {
invokeJSP(url);
}catch(IOException e) {}Well, you already have all the string in a StringBuffer (you called it "b"). So you set up a start variable (initially 0), you get the indexOf('\n'), and add that substring to an array (or a Vector if you don't know how many elements to expect), then set start to be the character after '\n', and keep it up until you reach the end of the string.
shmoove -
All,
I am in urgent need of this requirement referencing/copying all selected multiple values in select List and putting them into text item/text-area separated by ","/comma delimiter.....any help
appreciated.
example:
select list
=======
aaaa
bbbb (selected)
cccc
dddd(selected)
ffffff
copied is:
bbbb, ddddNo worries, I've found a way.
You need to create a pl-sql function that generates the necessary HTML code that will render the select list using the selected="selected" attribute when the option value is selected.
This is an example of the expected HTML code for a multiple selection list:
<select name="favoritefood" id="favoritefood" multiple=true; size=4;>
<option value=1>Cheese</option>
<option value=2 selected="selected">Egg</option>
<option value=3>Cabbage</option>
<option value=4 selected="selected">Ham</option>
</select>
I created this function in order to find the matches within the saved code and the option value. And then include the selected="selected" string in the returned HTML code.
Finally, I'm using this function in the SQL query that generates a tabular report and I changed the column Display Attribute to "Standard Report Column". Then the report instead of showing the HTML code, will render it to a HTML item.
Regards
Edited by: user9982480 on Jul 30, 2012 8:32 AM
Edited by: user9982480 on Jul 30, 2012 8:33 AM
Edited by: user9982480 on Jul 30, 2012 8:34 AM -
DW CS3 Dropdown list multiple MySQL Set ?
How do I update a MySQL Set field with multiple
selections from a DW CS3 dropdown list?
(No problem in updating a single value (either text or
numeric.)
Thanks.Vozzek wrote:
> Could someone please take a brief look at the code below
and tell me why
> Dreamweaver CS3 keeps crashing every time I try to close
the </select> tag?
http://www.adobe.com/go/kb402776
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
I am developing a 10 camera system using multiple IEEE 1394 (firewire) cards ... How do i list the firewire cards connected and which camera is connected to which card ...? PLs reply..
duplicate post.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies -
Same doc lists multiple times in Finder
When I search for a document in Finder, it will list that document a hundred times. The same document, with a date next to it. As if it has to list every time I've opened it. I just want the document and all that noise makes it confusing. THere arent' multiple versions are there?
The other thing I hate is that I search for a document, and I put in the EXACT title of the document. It will give a list of a million files that have nothing to do with the document I am looking for. Files from apps, all kinds of crap.
Is there a setting or something to make Finder work better? Because right now, it really is kinda ridiculous the way it's working on my computer.You need to make sure the artist name is spelt in an identical manner on every track. Even an extra space at the end of the name that you might not notice can make a difference. Try this even if everything looks the same. Sort your iTunes library by artist to bring your tracks together. Click on the first track by your artist, hold down the shift key and click on the last track in the list, this will highlight all in between. Right click on the list and choose Get Info, you get a dialogue box asking if you want to update multiple items, click Yes. If you see the "artist" field is left blank, then there is a discrepancy with that name. Overtype the artist name then click ok and this will ensure the whole selection is identical. Once you've done this connect your iPod, if you are updating automatically it will pick up the changes. If you are updating manually follow the instructions above with the iPod connected and carry out the changes directly on the iPod's song list.
If the name is not the issue, try this. Highlight all the songs for that artist, right click on them and select "apply sort field/same artist". -
Same Artist Lists Multiple Times
I'm confused on why a random artist will list itself multiple times when others will organize themsevles under one name with a drop menu. All the artist/album/track information is listed correctly but on Itunes and on the Ipod it will list it seperately instead of together. Anyone know how to fix that?
You need to make sure the artist name is spelt in an identical manner on every track. Even an extra space at the end of the name that you might not notice can make a difference. Try this even if everything looks the same. Sort your iTunes library by artist to bring your tracks together. Click on the first track by your artist, hold down the shift key and click on the last track in the list, this will highlight all in between. Right click on the list and choose Get Info, you get a dialogue box asking if you want to update multiple items, click Yes. If you see the "artist" field is left blank, then there is a discrepancy with that name. Overtype the artist name then click ok and this will ensure the whole selection is identical. Once you've done this connect your iPod, if you are updating automatically it will pick up the changes. If you are updating manually follow the instructions above with the iPod connected and carry out the changes directly on the iPod's song list.
If the name is not the issue, try this. Highlight all the songs for that artist, right click on them and select "apply sort field/same artist".
Maybe you are looking for
-
Hi This question is related to table component implementation. I want to display the column values inside the small round image with different colors and value should appear in the middle.
-
Newest software version for 6500 slide?
Why is it on some forums that they say the newest software version is version 6, whereas when i check on the Nokia website it says that version 4.84 is the latest version? Help/thoughts would be much appreciated.
-
Apple sign, then sad ipod sign.. cycles over and over
It's truly frusterating. my warranty ended just last month and my ipod broke about a week after my warranty ended. ARG! When i try to turn my ipod on, the apple sign shows for about 10 seconds then the sad ipod sign shows for about 20. I'm charging i
-
Hi all. Does anyone know a function to export "real" XLS files from SAP ECC 6? When we try to export in this format, besides the XLS extension, the file content is a CSV (separated by tabs) which I have to open in Excel to convert into a real XLS fil
-
How can I write a comment in a file lvm during running
hello, I need to write a comment in a file. I use Write LabVIEW Measurement File to write my signal in a lvm file. I want to insert a comment and I use a string control to comment. is it possible to write a comment during running of program?? I must