Device list on smart wifi

i have no idea why does the devices show up in one place only and i tried every simple thing like resetting and etc but none worked.... btw RE1000 is my old wireless extender which i dont use right now

Are you experiencing multiple IP addresses and Mac address for a device listed in the device list? What's your router model number and firmware version? Was this working fine before?

Similar Messages

  • Linksys smart Wifi error while deleting offline device from device list

    i have Cisco Ea4500 with linksys smart wifi, each time i try delete offline device i get error message.
    anyone can help?

    What browser did you use in deleting offline devices? Are you doing it under the Device list? If yes, normally it should be deleted because those are widgets only. Can you try your other browsers? And do it on the main computer.

  • Linksys Smart Wi-Fi Device List Not Finding Windows 8 Wireless Adapter

    I recently upgraded my Wi-Fi router to an EA3500 and am controlling it using Smart Wi-Fi running on a wired Windows 7 machine.
    So far, I have been able to add devices to the network without issue and each of those connections works fine.  All, except my TV, have been Windows 7 based machines.  Smart Wi-Fi Device List has been able to "see" each device and I have been able to add them to that list as well.
    I am attempting to add a Windows 8 desktop computer to the network which is using a external USB wireless adapter.  That computer can see and connect to the network through the EA3500 and the connection seems to work fine.  The only issue is that its adapter does not show up in the Device List.
    My questions:
    1)  Does the Device List do anything else besides showing a list of devices I chosen to add to my network?
    2) How do I get my Windows 8 wireless adapter to show up in the Device List?
    Thanks In Adance! 
    Solved!
    Go to Solution.

    MAC devotee wrote:
    I would like to chime in here too. I also have the same issue as described on an older Mac desktop. The ethernet port has failed so it connects only via the AirPort wireless. My issue is IMPORTANT because until this devices shows up on the Device List I cannot apply the Parental Controls. Joining Orloldman for an answer... (Thanks!)
    Try the following:
    1.       Disconnect the computer from the wireless network
    2.       Remove wireless network profile on your computer
    3.       Reboot the computer and power cycle the router
    4.       Reconnect to the wireless network
    5.       Check if the computer shows up on the device list.
    If it is still not showing, reset and reconfigure the wireless router.

  • Un-link list of preferred WiFi networks between devices

    I have one wifi network for internet access, and another one for TimeCapsule. TimeCapsule is for my MacBook. But I DON'T WANT MY iPad TO JOIN THE TimeCapsule network. The issue is: when I tell my iPad to "Forget this network", it also dissappears from my MacBook! Can anyone advice me how I can un-link the lists of preferred WiFi networks between different devices?
    Thanks!

    thanks for your reply, but this isn't exactly the issue.
    One network is simply hosted by TC, which provides a (hidden) wifi network for my MBP.
    Independent of that, there's a public wifi network in the room. My iPad should simply ignore the TC network, and connect to the public wifi. I never entered the TC network details on my iPad, but (I'm assuming) because of iCloud keychain sharing, it automatically picks up the TC network, and because this signal is stronger, connnects to it. when I tell the iPad to "forget this network", my MBP also fogets it, and if I set it back up on the MBP, ...
    I could just disable iCloud on my iPad, but that's annoying for other reasons.
    I'd be very grateful if you hab any suggestions!

  • When I bootup the icon for Elements shows up in orange.  It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list.  This is a recent development.  The icon used to be green upon bootup.  Does anyone know why ?

    When I bootup the icon for Elements shows up in orange.  It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list.  This is a recent development.  The icon used to be green upon bootup.  Does anyone know why ?

    I'm sorry to hear that.
    I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago.  I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
    Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
    Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all.  I can go weeks between syncs.
    Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist.  Add another playlist ("walk" or "workout") and add different podcasts to that one. 
    Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff).  Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
    Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for.  It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.

  • EA2700 Smart WiFi Unable to Connect

    I can't connect My EA2700 router through the Smart Wifi Utility.
    When I first turned on the router I utilized the the CD it came with and tried to set it up. Although I was in range of the router and I can see it in My wireless list, I couldn't configure it.
    I came of the utility and using the windows 7 prompts I was able to change the SSID and I received a generic password.
    I was able to connect My laptop to the router with this password and access the internet.
    When went to configure it through the Smart Wifi utility using the same password I can't access it. My laptop is connected but I can't access the router in the utillity.
    I directly connected My laptop to the router using a cat5 straight cable from My laptops Ethernet port to the router's port #1 and tried the smart wifi utillity again. Still I can't connect.
    I tried using the IP 192.168.1.1 in the browser Still can connect.
    I tried using the CCC website Still nothing.
    The prompt keeps saying invalid password, mind you at the moment I have already connected 3 more devices with the generic password.
    Any advice will be greatly appreciated.
    Solved!
    Go to Solution.

    Have your tried using "admin" instead? You did not exactly configure the router using the Cisco Connect setup wizard so the router's password is not the same as your wireless network's password. Log-in to http://192.168.1.1 or http://myrouter.local and use "admin" for password. If you have upgraded the router's firmware during setup, you may also go to http://linksyssmartwifi.com. Here, you can choose to access the page locally (use "admin" for password still) or create a Linksys Smart Wifi account for cloud- based access.

  • Printer shows up multiple times in my device list

    I have an EA4500 router running firmware version 2.1.39.145204.  A device, which I assume is my HP printer, shows up on my device list multiple times (11).  This is illustrated below with the devices status report from the "Troubleshooting" tab of my Smart Wi-Fi interface.  The device listed as "Photosmart Premium C309g-m" is indeed my printer.  The MAC address listed agrees with the set-up information in my printer and it is correctly listed as connected via wi-fi.  There is no hard wire connection from the printer to the network..  As you can see, there is a bunch of other devices listed all with the same name.  These devices have the same IP address as my printer but different MAC addresses.   My questions are:
    1. What causes this situation?
    2. How do I fix it?  By this I mean, how do I remove the multiple listings?
    Thank you in advance for your help.
    Name MAC address IPv4 address Connection
    PKs-iPad
    FC:25:3F:9B:5B:66
    192.168.1.118
    Wireless
    HP0026550FA2B0
    DC:E0:00:00:B8:C5
    192.168.1.128
    LAN
    HP0026550FA2B0
    DC:E0:00:000:20
    192.168.1.128
    LAN
    HP0026550FA2B0
    DC:E0:00:00:10:9F
    192.168.1.128
    LAN
    HP0026550FA2B0
    DC:E0:00:00:109
    192.168.1.128
    LAN
    HP0026550FA2B0
    DC:E0:00:00:38:A5
    192.168.1.128
    LAN
    HP0026550FA2B0
    DC:E0:00:00:20:74
    192.168.1.128
    LAN
    Owner-PC
    00:23:08:CC:F6:00
    192.168.1.130
    LAN
    PETER-LAPTOP-WiFi
    00:1D9:68:F2:E0
    192.168.1.122
    Wireless
    David Cohen’s MacBook Pro
    00:23:6C:92:CE:22
    192.168.1.104
    Wireless
    Photosmart Premium C309g-m
    00:26:55:0F:A2:B0
    192.168.1.128
    Wireless
    HP0026550FA2B0
    DC:E0:00:00:20:AA
    192.168.1.128
    LAN
    HP0026550FA2B0
    DC:E0:00:000:B4
    192.168.1.128
    LAN
    HP0026550FA2B0
    DC:E0:00:00:98:81
    192.168.1.128
    LAN
    HP0026550FA2B0
    DC:E0:00:00:18:A9
    192.168.1.128
    LAN
    Name MAC address IPv6 address Connection

    Hi sgtpepperlhcb2! Duplicate MAC and IP addresses in the DHCP list can be an indication of a possible firmware problem. I suggest you upgrade the router's firmware. Reset and reconfigure the router if the firmware upgrade will not work.
    Here's an article that may help.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d2d5c9da8e68439883b85a9cf72bf7e5_How_to_upgrade_th...

  • Device list has duplicate entries which I am unable to delete

    smart WiFi application device list has foreign an mullti[ple duplicate entries.  When I try todelete them I get "Unexpected Error" [object XMLDocument].

    “smart WiFi application” Are you referring to the user interface of the router which is the Linksys Smart Wifi? If it’s the Linksys Smart Wifi user interface of the router, how did you access it, via IP or router name? How did you log-in, via local or Linksys Smart Wifi account? What is the model # of your router and its current firmware? In the device list, how many icons do you have? How many actual devices you have in the network? Say for example you have a laptop and desktop, you can expect three icons on the device list. Each device on the network holds its own icon and name. If the name and icon doesn’t much to the device, you can change the name and icon to much the actual device. Sometimes the device list shows “network device”. For you to find out what device is that, check the IP and MAC address. Compare it to the actual device IP and MAC which can be found on the network properties of the device. If you have identify the devices and you still want to delete the un-identified device icon on the list. What you can try is to turn off the other devices in the network and take a look at closely the icons on the device list if one of them turns OFFLINE then you can remove that icon. You can now log-out from Linksys Smart Wifi portal which can be found on the upper right of the page. Clear you browser history and close it.  Power cycle the router by unplugging the power supply for 5 seconds and plug it back in. Turn ON your network device and try access the router Linksys Smart Wifi page and check the device list if you still have that “foreign and multiple duplicate entries”.

  • EA6900 Device List - Update cycle time frame?

    I have owned EA6900 router for 2 weeks. Works great. Using the device list feature to see which devices are online and which are not. 
    See devices that are no longer on my network as "online". How can this be?
    When does the router ping the network for real-time device status?
    I am using the Device Monitr app and it just mimics what the firmware shows. 
    How do I make the device list real-time or re-ping every 15 minutes at a minimum?
    Thanks

    What I discovered is that the Linksys Smart WiFi page is getting some time to refresh the device list.There is nothing on the page also that we can change to refresh it. However, this will not affect your internet connection. What we can try is to reboot the router on the Linksys Smart WiFi page or just manually do it.

  • 1st gen Apple TV not in devices list in iTunes

    My 1st generation AppleTV is no longer showing in the devices list in iTunes on my Mac Pro.  I have read several pieces of advice and performed the following long list of actions but I am still stuck and unable to sync my Apple TV.  I hope someone has a new suggestion for me?
    The AppleTV has had the computer removed from the connections setting.  It has been rebooted and left on the connect a new computer screen with the numerical password visible.
    The AppleTV can be seen visible in the iTunes of my Macbook Air running 10.8.3 and the iTunes version is 11.0.2.  I have not 'clicked to setup' since my main library is on my Mac Pro that used to sync.  I can ping appletv.local from my macbook air succesfully which returns an IP address.
    My MacPro is running OSX 10.7.5 and iTunes 11.0.2 and one day the device failed to show in the devices menu.  I cannot ping appletv.local from my Mac Pro but I can ping the IP address returned from the ping on my Macbook Air.
    At first I removed the device from iTunes preferences and removed the computer from the AppleTV which allowed me to see the AppleTV on my Macbook Air but not my Mac Pro.
    Secondly I used AppZapper to uninstall iTunes and reinstalled from a fresh download as r4ecommended here -> http://reviews.cnet.com/8301-13727_7-10329494-263.html  I also used Pacifist to reinstall the Apple Mobile Device Service after removing the service as per the instructions here -> http://support.apple.com/kb/HT1747  My iTunes library is back as it was but my other devices were originally missing until I connected them via USB to re-enable the wifi sync.
    I can see my shared libraries between my MacPro and my Macbook Air.  I can also use Airdrop between them and can connect between them as usual.  I have disabled the firewall on my Mac Pro just in case and I have no VPN or antivirus software that blocks any communication.
    My network setup is a little unusual since I have my ISP router as the DHCP assigner connected to an Airport Extreme base station that acts in bridge mode to distribute a wifi network across my home.  I then have a powerline adapter connected to the airport base station to send network around my home to places where wifi is weak.  My macbook air connects to the wifi.  My MacPro connects via a switch in my office to a 2nd powerline adapter.  My AppleTV connects via a 3rd powerline adapter and can see the internet fine (it plays youtube videos for example).  None of the network devices have any ports blocked on them and since the Macbook Air connects to the AppleTV as expected but the MacPro does not then I do not think it is network related.
    So I can only assume there is something wrong with my MacPro being unable to recognise my AppleTV as an AppleTV rather than just another device on my network.  Anyone else got any ideas of what to try on my MacPro to get it to recognise the AppleTV?

    I am still experiencing this issue - can anyone help?
    Since writing the above replies I have also tried to downgrade iTunes to 10.7 via these instructions -> http://arstechnica.com/apple/2013/03/how-to-downgrade-from-itunes-11-to-version- 10-7-on-your-mac/ but that did not work.  iTunes worked fine but the AppleTV was still not in my devices list on my Mac Pro

  • How can I see my iPhone on the Shared devices list on sidebar of Finder ?

    I have a Home Network Wireless-N based on a Linksys Broadband Router WRT300N. I have my MacBook Pro and my iPhone, my wife her MacBook, my son a Windows portable and still a Desktop Windows PC. The desktop Windows PC is connected via Ethernet cable direct to the Router, the other four devices connect wireless.
    The problem is that I can only see the desktop Windows PC in my Finder's Sidebar on my MacBook Pro. Since all the other devices are connected in the wireless network with full access to internet, I suppose I should see them in the sharing devices list on the sidebar. Tried already to connect to server under Menu Go To without any luck. Someone knows why ? Thanks for some help.

    The iPhone doesn't have a disk mode or wireless N capabilities.

  • I have a device that shows up in my airplay device list on my iMac, and my phone.  This device does not exist.  How do I get it out of the list? I would like to drop it before I add new airplay devices to my network.

    I have a device that shows up in my airplay device list in iTunes, and on my iPhone that does not exist.  How do I delete it? I have OS X 10.10.1 on my iMac, and iOS 8.1.2 on my iPhone 5.  I would like to get it out before I add new airplay devices to my network.

    I called Apple tech support.  The device turns out to be a WiFi extender.  I never would have guessed that the extender would show up on the list since I wouldn't think of it as an airplay device, and in the list, it shows a little speaker icon.  In the process of talking with Apple, I gained a greater understanding of how airplay works. 
    It turns out that there is no stored list of devices in a file on the mac, or anywhere else.  I have seen a lot of traffic on the web from people trying to modify this list, but there isn't one.  iTunes, and other devices simply poll the network for airplay devices from time to time.
    Have a very happy holiday!
    I would like to get rid of "just give me the aster, and stop wasting my time", and replace it with my name.  The Apple tech support guy never saw that before.  Just my luck.

  • Why is my iPad is not showing up in the Devices list in iBook Author?

    Why is my iPad not showing up in the Devices list in iBook Author? iBook ver is up to date. iTunes sees the iPad. What gives...
    Message was edited by: drydruid

    OK, the problem is partly solved. iBooks Author is not 'smart' enough to realize the iPad had been plugged-in and iBook on if all that happens after iBooks Author is already started. On the off chance that that was the problem I Quit iBA, made sure the iPad was connected and iBook was on then restarted iBA. Sure enough, there it was.
    I really like Mac's but sometimes they're not as smart as they think they are.

  • HT1947 I can't pair my remote app for my iTunes music There is nothing to pair in THE device list

    Can't pair remote app on library
    Home sharing works
    But I only need remote app for remote library functionality

    yes it is conected to the same wifi network ..i can download my library from icloud from that wifi on my iphone
    i did and add the firewall isseu
    so itunes is added on windows firewall
    my device list shows sync iphone, transfer purchases,back up , and restore from back up
    i can't add the numbers from remote app
    even remote home sharing doesn't seems to connect neither

  • "Loading Device List" Freeze

    When I connect up my Casio EX-S600 camera to my computer, Adobe Photoshop Album Starter Edition 3.2 automatically launches the photo downloader. However, the screen shows the words "Loading Device List" but does nothing and freezes. I have to go into System Manager to kill it.
    My wife has the same camera and it does the same with hers.
    I have re-installed APASE V3.2 and this has not cured it. I have looked through the questions and answers on the forum and have seen folks having a similar problem but no definitive answer to it. I have seen it suggested that it is something to do with "Preferences" but when I try to go into this part of the software, it also freezes.
    I have also gone into the Customer Support part of the web-site and followed the steps suggested there, again with no result.
    I have upgraded the software on the camera to the latest version, again with no result.
    I believe the problem arose at the same time as I upgraded to APASE V3.2
    Any suggestions?

    Hi Jim,
    Thanks for your reply.
    I use Norton System Works and Norton Internet Security. Firstly, I disabled every Norton component that I could. The APASE software still freezes. Secondly, just to be sure, I uninstalled Norton completely but still the APASE software freezes. I have now reinstalled Norton and all the required upgrades (which took a few days!) and still the APASE "loading device list" freezes.
    "My Computer" shows the camera and I can transfer photos to "My Photos" from the camera and then use APASE to "get photos from file" but this is an unsatisfactory "get round" really.
    Incidentally, I have just bought a Summit Photofix copier with Photoimpression 6.0 to copy negatives onto my hard drive. When I open the software and try to transfer an image, "Windows XP encounters a problem" and closes the software. I haven't solved this one yet but it may be related. I have also tried to re-load this software, including when Norton was uninstalled, but it hasn't helped the problem.
    Regards - Derek.

Maybe you are looking for