Device Manager Can not recognise the Camera

From the first day I installed my iPhone the camera would not connect to my PC. In the device manager my camera comes up in Imaging devices as "iPhone" with an ! inside a yellow circle (Not Triangle)I have deleted the driver and reinstalled it several times, and it is as if it can not find the driver or it does not exist. I also deleted the USB "Apple Mobile Device USB Driver" and reinstalled it and rebooted several times. In the device manager I believe the device should come up under Imaging devices as "Apple iPhone" instead of just "iPhone".
iTunes syncs fine and I can even send photos to the iPhone to the photos app as an album, but I can not get the iPhone photos off the phone except via email
Does anybody know the solution to this problem?

Oh my gosh! I was having this problem, too! I found the solution, tho. It really worked!
I was having a pretty serious problem that started when I upgraded to iPhone 3.1. While iTunes recognized my iPhone, iPhoto didn't.
And if I opened iPhoto, I couldn't see the camera. Same with Image Capture - it said no device detected. I know there was no problem in 3.0.
Luckily, there are other ways to get the photos off the iPhone, and luckily iTunes recognizes the phone, but that of course is not the point.
Good news is that I believe I found the fix. Click through and I'll see if I can explain it.
For some reason, it has to do with photos saved to the camera roll that were not shot with the iPhone. In other words, photos saved from email or screenshots. I have no idea why that would be, but once I deleted the non-shot photos, iPhoto launched normally and all was right with the world.
The problem is mentioned several times in the Apple support forums and everyone with it is running iPhone 3.1 and Snow Leopard 10.6.1. Restoring the iPhone, rebooting and repairing permissions from the Snow Leopard disc has no effect. The only fix I've found is my weird one.
Anyone else seeing this problem? Anyone find a different fix? Please let me know in the comments or interact with me on Twitter or Facebook.
Thanks and thanks for calling.
http://www.chicagonow.com/blogs/iphone-therefore-iblog/2009/09/iphoto-doesnt-rec ognize-iphone.html

Similar Messages

TS3988 I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem

I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem to be t

There are only two things that you must do to connect a device to calendars:
1) In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
2) Turn on calendars on the same page.
You said that the iphone 4 and ipad **used** to automatically sync. Do they no long sync?

HT4101 My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

I'm having same problems. If I connect my blackberry it says it uses too much power. If I take sd card out of phone and connect that way I get the same message. The leaflet with the connector says go to Apple.com/support/iPad to find list of compatible cameras.......... I'm still trawling the site to find any such list! Just need to know if it will work with a blackberry ..... If not I've got to take it back. Have been advised by a friend to cut my losses get my money back and use Bump to transfer my pics. I don't own a traditional camera because my phone has a great one. Really don't want to have to carry a camera about with me! They don't make it easy do they!

My mac will not recognise the camera on my iphone so i cannot move my photo's

my mac will not recognise the camera on my iphone so i cannot move my photo's. it has worked fine in the past. i recently moved itunes to an external hard drive and that will still connect for music etc. but the phone does not show up in finder at all the mac just keeps beeping and saying no camera found any ideas please?

Hi Sylvia's iMac,
Welcome to the Apple Support Communities!
It sounds like you need to reset the administrator password on your computer. Please follow the instructions in the attached article for information on how to complete this process. The article has instructions for Snow Leopard (10.6) and earlier, but there is also a link within the article for assistance in Lion (10.7) or later.
OS X: Changing or resetting an account password (Snow Leopard and earlier) - Apple Support
Cheers,
Joe

Anyone who has had a webcam failure where the "device manager does not recognize the hardware"?

HP Pavilion dv7 running win 7 64 bit
Device manager does not recognize trueVision HD webcam. Tried all the suggestions on HP website, which eventually says it's a hardware failure. Has anyone had any resolution to this issue? I see the problem occurs across various platforms with varying resolutions to the problem.

Ha Ha. I'm replying to my own post!
Solution.... If your laptop does not recognize the built-in camera at all in the device manager and your warranty has expired or your willing to void your warranty. You can see if you have the same problem as I had. Gently pry the plastic frame around your camera and display screen apart you need to go at least half way down the sides. There is also some adhesive tape you will need to push to one side or the other. To the right of the camera there is a very small connector, it wont even look as if it is separated. Use a tweezer or small screwdriver to push the connector into the socket. This fixed my problem ...The next startup recognized the camera and has worked perfectly since. In my opinion (13yrs experience in reliability engineering semiconductor manufacturing) this is a manufacturing reliability issue either the socket cannot hold the connector in place or there is too much strain on the wiring to the connector. Good luck.

Cisco Unified Operation Manager: can not see the Campus manager

Dear all,
I have installed the CUOM to manage my IPT system. I have successfully installed without any errors. The system now can detect all IPT system components but I have a problem. From the Tool on Service Level View, I only the option for Alert History and can not see the option for Campus manager to customize the topology (like the tool on Ciscoworks LMS).
Please give me some advices.
Thank you,
Thanh

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Webcam failure where the "device manager does not recognize the hardware"? Pavilion dv7 Win 7

I have done everything the website suggests. Nothing worked. Has anyone gotten satisfaction to the issue either by a fix or a service center repair? I have seen others with the same problem accross different operating systems.

Ha Ha. I'm replying to my own post!
Solution.... If your laptop does not recognize the built-in camera at all in the device manager and your warranty has expired or your willing to void your warranty. You can see if you have the same problem as I had. Gently pry the plastic frame around your camera and display screen apart you need to go at least half way down the sides. There is also some adhesive tape you will need to push to one side or the other. To the right of the camera there is a very small connector, it wont even look as if it is separated. Use a tweezer or small screwdriver to push the connector into the socket. This fixed my problem ...The next startup recognized the camera and has worked perfectly since. In my opinion (13yrs experience in reliability engineering semiconductor manufacturing) this is a manufacturing reliability issue either the socket cannot hold the connector in place or there is too much strain on the wiring to the connector. Good luck.

Equium P200D PSPBNE: device manager does not show the DVD-RW DVR-K17A ATA DVD/CD

Hello experts out there i need urgent help!!
My Equium P200D all of a sudden it decided to show the DVD/CD Drive in device manager as no longer working due to a corrupt driver??
I am running Vista Home and despite deleting the drive and trying to update the driver nothing seem's to work can anybody help i am getting to the point of throwing it out of the window.
Regards
Stephen

Hi dude
This issue is known to me it happened to me too
The problem is you Windows registry!!!
One registry entry is corrupt and therefore the CD/DVD ROM does not work as I should.
So what to do.
Firstly remove the driver from the device manager. Just simply delete it.
Then access the registry and and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Then reboot the notebook.
Check it out

I have a panasonic Sdr-H85 my Mac does not recognise the camera. So I cannot get pictures or movies off the camera

I have tried but this on my laptop and desktop computer. But neither computer see the camera. can some one please help. thanks.

What type of cable are you using to connect the camcorder to your Mac? Are you tring to import into iMovie or just drag and drop the movies to copy to your internal HD?
Clinton

Why the cs6 premiere pro can not recognise the miniDV

My system is win7 64 ultimate . The OS can recognise my DV and ensure me it works well.
but CS6 premiere pro tell me there is no capture equip.
where is my fault ?? or someone tell me the solution.
thanks a lot

1394 driver was updated to "legacy" and the doc was read and executed , but it doesnt work. My DV is DCR-PC104E PAL from SONY. In CS6 , on capture panel -> setting , I only found PC100E,PC101E etc. but no 104E.
what should I do next ?? follow doc I try all steps but it doesnt work.

Blackberry Device Manager can't find 9320 Bluetooth device (even Bluetooth is switched on and set to Discoverable)

I want to sync my Blackberry 9320 via Bluetooth to a Windows 7 Professional machine using a Bluetooth adapter. Syncing using USB cable works fine.
I can Bluetooth pair with the 9320 and also send / receive files to /from the Windows 7 machine. Fantastic !
HOWEVER, Blackberry Device Manager can not find the 9320 Bluetooth device (even Bluetooth is switched on and set to Discoverable) - see screen shots below.
By the way I have already tried (amongst other things) “Manually Install RIM Virtual Serial Ports in Microsoft® Windows® 7” on http://www.youtube.com/watch?v=gK2n5dHxGHI Unfortunately, this does now work - the drivers do load up OK and remove the warning signs when view in Windows Device Manager, but Blackberry Device Manager still can't see my 9320.
Please help !

I have the exact same problem with my 9360. I have also tried all the fixes I could find on the Internet with no luck. I have posted a request as well. I will let you know if I find a solution. What gets me though is that this appears to be a long standing issue with no obvious fix! Best of luck.

I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?

I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port. The MacBook recognises the camera immediately. Can anyone help?

Thank you for your reply. I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years. The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import. Now all of a sudden my iMac does not recognise the camera. However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing. So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years. I can only assume that the settings on the iMac may have changed, but I cannot verify this.

Ever since I downloaded the ICloud I am unable to use my camera, it will turn on but the screen will not show the camera view, anyone else have this problem or what I can do to fix?

Ever since I downloaded/installed the ICloud IOS5 I can not use the camera icon on my Ipod. I can click on the icon, the screen will lighten just a little but it is not letting me see what is in the camera view. Any one else have this problem or know how I can fix it?

Make an appointment at the genius bar are your nearest Apple store. At this point there is nothing you can do without a computer, so if you don't have one and don't know anyone who has one that you can use the Apple store is a good fallback.

After upgrading to mountain lion,my HP device manager can't find scanner

I have an HP Photosmart C5550 All-in-One printer scanner.
The HP device manager can't find the scanner. Printer works fine.
I upgraded from Lion to Mountain Lion and this is my problem now.

Try the HP Photosmart C5500 series app in /username/Library/Printers/, HP Utility->Devices in /Library/Printers/hp/Utilities/, Image Capture, or Preview->File->Import from scanner option.

I have a new pc and have installed (again) CS5, however I can not install the updates Adobe Bridge, Adobe Extension Manager, Adobe Photoshop (64 bit) and Potoshop Camera Raw.

I have a new pc and have again installed CS5 however and unfortunately I can not install the updates Adobe Bridge, Adobe extension Manager, Adobe Photoshop (64 bit) and Photoshop Camera Raw ?

Hi DerrylS,
I would request you to try the below mentioned link for Error U44M1P7:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
If problem still persist and as in log file it says "Exit code 7", kindly try below mentioned links.
Link 1: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Link 2: http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
Thanks!
Atul Saini

Device Manager Can not recognise the Camera

Similar Messages

Maybe you are looking for