Device Manager coming up with a lot of issues. (Base System Device, etc.)

Hi Everyone,
Just got a new prebuilt/custom gaming rig and I'm coming up with some issues in my Device Manager. The tower came all set up with Win8 but I decided to wipe/reinstall the OS on a new 120g SSD that I bought. I installed a fresh win8 x64 without any other devices hooked up besides the monitor, keyboard, mouse and of course, the SSD. All current drivers are installed (video, motherboard) and the BIOS is updated to v2.7. Here's the DM screenshot for reference
I've tried this method but I don't have thunderbolt;
https://forum-en.msi.com/index.php?topic=163113.msg1195947#msg1195947
All other research I have some across goes over it being a card reader issue, which I don't have.
Hope someone can give me a hand with this, it's driving me crazy!
Thanks!

You nailed it, xmad! Thank you.
How did I miss this? I was never able to come across this driver.
 http://www.msi.com/service/download/driver-17678.html
Driver20332 was installed from my research but it obviously didn't work
I thought I was searching correctly.
Thanks again!

Similar Messages

  • How can I delete an Apple ID from one device and replace it with a different ID on that same device?

    How can I delete an Apple ID from one device and replace it with a different ID on that same device?

    Tthe brute force method: start with Settings > iCloud and turn off Find My (you will need the password), then change the iCloud ID, then go to the apps such as Messages, FaceTime, etc, and delete the Apple ID and enter the new one.

  • Missing driver for "Base system device" x2 after Windows 7 install on laptop

    Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
    Both devices report the following code in system information: 
    PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
    I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success.  Any help will be greatly appreciated
    This question was solved.
    View Solution.

    Here is the link.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

  • Missing driver for "Base System Device"

    Hi,
    I have a N200 (0769) with WIN7 (32 bit).
    In the Device manager I have two "other devices" with missing drivers named "Base System Device".
    I could'n find any of that.
    I try looking for the Hardwar IDs:
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA&REV_0A
    PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA
    PCI\VEN_1180&DEV_0592&CC_088000
    PCI\VEN_1180&DEV_0592&CC_0880
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA&REV_01
    PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA
    PCI\VEN_1180&DEV_0843&CC_088000
    PCI\VEN_1180&DEV_0843&CC_0880
    But with no success.
    Any help where can I find that?
    Thanks in advance
    Solved!
    Go to Solution.

    hi nadne,
      Welcome to Lenovo Community Forums!
    Can you try installing this driver
    Ricoh Multi Card Reader Driver
    7kss73ww.exe
    3.25 MB
    Hope this helps,
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • ThinkPad W530 - 2447 3U2 - Base System Device unknown

    Hi guys, I tried to install a fresh copy of Windows Enterprise 7 64 bits, in my new laptop. I reinstall all drivers recommended in lenovo support (all) but in device manager window continues with yellow Base System Device message.
    These are the list of drivers installed:
    6hgx75ww.exe, 79oi30ww.exe, g1a133ww_w78.exe, g1ic09ww.exe, g1im15ww.exe, g1io15ww.exe, g1ir15ww.exe, g1ku20ww.exe, g1ra15ww.exe, g1rf42ww.exe, g1rg14ww.exe, g1rw10ww_64.exe, g1ss01ww.exe, g1w216ww_s64.exe, g1xv51ww.exe, g1ys12ww.exe, g4wb11ww.exe, g5de36ww.exe, geku18ww.exe, gfvv03ww.exe, hfu406ww.exe, os7021ww_64.exe, os7025ww_64.exe, osfj08ww.exe, osfq03ww.exe
    The last driver was 8ass82ww.exe and the problem persist.
    I need your help. Thanks
    Solved!
    Go to Solution.

    Guys, sorry for the little post. Here the complete:
    With this driver update:
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
    I installed and all devices were recognized.
    Thanks you very much

  • Windows 7 RC - Portege M200 - Base System Device

    Windows 7 RC is running nicely on my M200 but the Device Manager is showing an 'Other Device' with no driver loaded. It is described as 'Base System Device' and Properties shows its location as 'PCI Bus 2, Device 13, Function 0'.
    I have tried on-line searches and browsing within my M200 for a driver with no success. I have read elsewhere in these forums that the 'Base System Device' could be tied up with the SD Utilities. I have downloaded a fresh copy of the SD Utilities and installed them but still no luck. Certainly the SD Format utility won't work - it does not recognise when an SD card in inserted - so may be the SD Utilities need revision for Windows 7.
    Not a major problem as I can format SD cards elsewhere but it would be nice to get a clean bill of health from Device Manager.
    Has anyone else run into this problem and, even better, found a solution?
    Keith Woolf

    Some progress! I have checked out the IR device; it has a 'later' driver installed than the one listed on the laptopvideo2go website so I have left it alone. It report 'working OK' although I have no means of checking it.
    I found the VENdor and DEVice numbers under Base System Device\Properties\Details\Hardware Ids; they are VEN 1179 and DEV 0805. The 'pcidatabase' decodes these as VENdor Toshiba America Info Systems and DEVice SD Card Controller.
    This seems to confirm that, as I guessed from a thread on another forum, it is the SD Card Controller that lacks a driver and that it is 'Toshiba' who - we hope - will come up with an updated driver 'in due course'.
    Thanks very much for your help; I have learned how to identify PCI problems and have bookmarked the M200 Impressions site - very interesting and I shall keep an eye on your work.
    Thanks again, all.

  • What is 'Base System Device'?

    After working with my laptop for over two years, i encounter more and more problems but the weirdest thing is that suddenly it tells me that it found a new hardware called base system device, which should be installed.
    I have no clue what that is, where to find the software or whether I need to install it at all. Can somebody please give me some advice here?
    Thanks.

    Hi
    Firstly could you please post you notebook name?
    Secondly: did you install the OS from the Toshiba recovery CD?
    This image contains whole drivers and necessary tools and after the installation of the OS from the recovery CD no unknown device should appears in device manager
    PS: Base system device is usually the SD Card Controller.

  • Base System Device driver in WIndows 7

    I recently installed WIndows 7 on my Lenovo 3000 G430 system, and all the drivers except for a few got installed automatically during the installation process...
    But then I noticed in Device Manager, I have 2 devices that are listed under 'Other Devices' that don't have a driver installed. I tried a direct search for drivers online, but it couldnt find any.
    Both of them are by the title 'Base System Device'.
    I checked the Lenovo wesite for drivers, but there are no drivers listed for WIndows 7. A few guys had raised this issue in the forum previously too, but they were not using Windows7, and I did not have this issue when I was using Vista...
    Please help...

    Hi tusharkaul,
    Try below to identify what components they are.
    Check the Device ID to find our its description:
    Right click the unknown device and choose Properties.
    Go to 'Details' tab.
    Choose 'Hardware ids' from the Property drop down list
     Take the IDs and google them and find out the descriptions of the devices. You should know what you are missing.
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • DV6416eo.. 500GB HDD, Windows 7. Base system devices w/o drivers

    Hie
    I replaced the original HDD with a 500GB WD5000BEVT.
    It works fine after I disabled Native SATA Support.
    I installed Windows 7. 
    Enabling Native SATA Support gives me a blue screen, and Windows 7 can't fix the problem.
    In device manager, I get in Other devices:
    Base system device - PCI bus 5, device 5, function 2
    Base system device - PCI bus 5, device 5, function 3
    No drivers for these.
    What would these devices be? Native SATA support?

    Hello jthompsn1957,
    You may want to read this article prior to any attempted OS downgrades.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Missing drivers after fresh installation of window 7 the base system device missing.

    missing driver on  HP pavilion dv4 the base system device drive,as a result of these i cant access sound on system.

    Hi:
    The base system device is most likely your card reader.
    Missing audio is related to something else.
    On the bottom of your PC on the sticker with the serial number, please post your p/n.
    That will identify the specific model of your dv4 and I can send you the link to the drivers.
    The p/n should be arranged similar to this:  AF846AW#ABA
    Paul

  • Missing Base system device elitebook

    Hi
    My laptop reports that i'm missing the Base system device.
    Hp elitbook 2560p
    Hardware id's
    PCI\VEN_197B&DEV_2392&SUBSYS_162B103C&REV_30
    PCI\VEN_197B&DEV_2392&SUBSYS_162B103C
    PCI\VEN_197B&DEV_2392&CC_088000
    PCI\VEN_197B&DEV_2392&CC_0880
    I can't find the right drivers.
    Can somebody help me with this problem?
    This question was solved.
    View Solution.

    Hi,
    Install the card reader driver on the relevant link below.
    Card Reader Driver - Windows 8.1
    Card Reader Driver - Windows 8, XP, Vista, Windows 7
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Pavilion zx5070us Base System Device driver missing

    Hardware manager says my Base System Device is missing, I don't know where to start looking. I've been reading posts and no one else having this problem has the same notebook as me. Pavilion zx5070us...
    PCI\VEN_104C&DEV_8201&SUBSYS_006B103C&REV_01
    PCI\VEN_104C&DEV_8201&SUBSYS_006B103C
    PCI\VEN_104C&DEV_8201&CC_088000
    PCI\VEN_104C&DEV_8201&CC_0880
    ...This is the hardware Id.

    Hi:
    This is the driver you need for that device.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29677-1&cc=us&dlc=en&lc=en&...=
    Paul

  • X220 Base System Device problem

    Hi,
    I am trying to install the drivers for my Lenovo X220 on Windows 7 x64.
    I managed to install all of them except for the Base System Device.
    Could you please assisst?
    Thanks.
    I am attaching the Hardware ID of this device:
    Solved!
    Go to Solution.

    I think it's the Ricoh card reader: 
    Media Card Reader Driver
    /L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
    A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
    Comunidad en Español  English Community  Deutsche Community   Русскоязычное Сообщество

  • Base System Devices missing for HP dv6500

    Hello people!
    I've 3 base system device drivers missing and an unknown device.
    HP Pavilion dv6500
    p/n= GT374EA#ABU
    The original was VISTA and now I've installed windows 8.1 Laptop cannot detect CD/ROM, speakers, microphone etc…
    Laptop cannot detect CD/ROM, speakers, microphone, webcam etc…
    Please help…
    Hardware IDs
    PCI\VEN_0180&DEV_0812&SUBSYS_308F003C&REV_12
    PCI\VEN_0180&DEV_0812&SUBSYS_308F003C
    PCI\VEN_0180&DEV_0812&CC_088000
    PCI\VEN_0180&DEV_0812&CC_0880
    PCI\VEN_0180&DEV_0803&SUBSYS_308F003C&REV_12
    PCI\VEN_0180&DEV_0803&SUBSYS_308F003C
    PCI\VEN_0180&DEV_0803&CC_088000
    PCI\VEN_0180&DEV_0803&CC_0880
    PCI\VEN_0180&DEV_0592&SUBSYS_308F003C&REV_12
    PCI\VEN_0180&DEV_0592&SUBSYS_308F003C
    PCI\VEN_0180&DEV_0592&CC_088000
    PCI\VEN_0180&DEV_0592&CC_0880

    Hello uesy,
    It appears that you're missing some device drivers after upgarding to Win 8.1.
    Unfortunately for that notebook, there were no drivers provided by HP after Windows Vista. The only driver support available would be what Windows installs for it during the install.
    Have you already tried going into the Device Manager and updating the drivers there?
    That would be the only other way.
    Sorry for the inconveince this may cause you.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • T500 Base System Device and PCI Device issue

    Hello everyone,
    I cant seem to find the right driver for the Base System Device.  Earlier this morning, I had 4 ?s named Base System Device (under Other Devices in the Device manager).  Once I ran the ThinkVantage System Update, the other 2 Base System Device have disappeared.  How come I still have 2 listed that need to be updated?  Also, the PCI Device has a ! sign.  Any ideas?
    I've already tried running the system update, and installed the Ricoh 4 in 1 card reader. 
    Thanks for your help.

    Hello vondorsupport,
    please take a look at these thinkpad superguide.
    May be it will provide some usefull information for you.
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

Maybe you are looking for

  • Not all Voice Memos transfer on sync w/iTunes

    iPhone 5S, iOS 7.0.4 MacBook Pro 8GB ram, OS X Mavericks iTunes 11.1.3 (8) For some reason, not all of my voice memos are sycing to iTunes.  There is one in particular that I really need to access on my MacBook Pro... but it won't transfer. Any sugge

  • Various questions on uplink profiles, CoS, native VLAN, downlink trunking

    I will be using vPC End Host Mode with MAC-pinning. I see I can further configure MAC-Pinning. Is this required or will it automatically forward packets by just turning it on? Is it also best not to enable failover for the vnics in this configuration

  • Help : Call Login Module directly when iView is launched - without submit

    Hi there, we have developed a login module on for our NW2004S SP13 Portal, that checks the IP address of the client to be in a valid range. If so, the standard SAP login screen must be bypassed. If not, the standard login screen needs to be shown (we

  • Using PalmVx with two computers

    I have been using a PalmVx with my Desktop computer (WIN XP Prof) and also with my laptop (WIN XP Prof). I recently formatted the HDD of my laptop and have re-installed my palmOne software ver 4.1.4 on my laptop. While installing the palmOne software

  • Last login time of user

    Hi Friends, I wanted to know the name of dictionary view which keep the user login details iee. login date and time. I want to check that what was the last login time of user. So that if user has not logged in since 30 days then his acccount must be