Device Manager ! FN button doesn't work

Portege R835-P56X Bios updated to Version 3 The laptop came with 64 Bit but I did a clean install with Windows 7 32 Bit because many of my programs and games didn't work with 64 Bit.
I can't install Toshiba Value Added Package,Toshiba PC Health Monitor and Toshiba eco Utility because they are 64 Bit.Pressing the FN button doesn't work,it does nothing at all using 32 Bit.With 64 Bit it worked fine with screen icons coming up when I pressed it.I wonder if the FN button only work in 64 Bit or maybe Toshiba Value Added Package contains the FN button driver?If anyone knows where to get Toshiba Value Added Package 32 Bit that may fix this problem,please let me know thanks.
I have a problem in Device Manager where it's showing ! Other Devices PCI Simple Communications Controller.I took a screen shot of Device Manager with 64 Bit installed just incase I ran into problems.Looking at the 2 Device managers side by side 32 vs 64 it looks like Microsoft Virtual WiFi Miniport Adapter is missing from the 32 Bit Device Manager.
I'm assuming this is Intel Wireless Display but I'm not 100% sure.Because every time I run Intel Wireless Display I get this error message.Unable to load the Intel My WiFi Technology Dll file
Anyway there is no Intel Display driver for 32 Bit so I had to download that from Intel website.There is however Intel Wireless Display for 32 Bit which I have installed but the ! in device manager remains.So I uninstalled Intel Wireless Display and downloaded the Wireless Display driver 32 Bit from Intel website hoping that might fix the problem.But the ! in device manager remains.
I have also tried windows update but it can't find any driver for Hardware.I have added 2 screen shots in Attachments
Attachments:
2.jpg ‏39 KB
1.jpg ‏167 KB

Well after alot of searching on Google I have finally found out what this PCI Simple Communications Controller is.
It's the Intel Management Engine Interface and lucky for me there is a 32 Bit driver.Now I have no more ! in Device Manager and I have uploaded an updated screen shot.
But now there are 3 questions.
1 What happened to the Microsoft Virtual WiFi Miniport Adapter?It was listed twice in 64 Bit but doesn't show up in 32 Bit Device Manager.
2 Why do I still get the error message when starting Intel Wireless Display?Unable to load the Intel My WiFi Technology Dll file even though I have found the driver for ! in Device Manager
3 Why doesn't the FN button work?It worked fine in 64 Bit but in 32 Bit it does absolutely nothing.The same goes for the touchpad on/off button which worked fine before in 64 Bit.But now with 32 Bit presing it doesn't turn the touchpad on or off,It does nothing.I hope Toshiba releases drivers for both of these features.
Attachments:
Updated Screenshot.jpg ‏49 KB

Similar Messages

Volume and Power button doesn't work..how do I fix?

My son's volume buttons or the power button doesn't work. Is there something I can do to fix these issues?

Try the following to rule out a software problem.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT4527 I want to move all my iTunes from old PC to new PC but Home Sharing on both and it works. At Step 11, I clicked Home Sharing Import button doesn't work.

Help! I want to move all my iTunes music, podcasts, etc. from an old PC to a new PC. I set up Home Sharing on both and it works. I followed the steps in http://support.apple.com/kb/HT4527 to the letter. At Step 11, I clicked on Home Sharing on my new PC, then Edit > Select All so I could then import everything to the new computer. No matter what I try, the Import button doesn't work. There are two buttons on the lower right hand side of the iTunes screen - one for Settings and one for Import. The Settings button is clickable but the Import button isn't even live. In other words, I can see it but not click on it. I have double-checked my firewall and it is not the problem. How can I get the Import button to work?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?

Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?

The warranty is not and has never been International. Warranty and support are only valid in the country of origin. The only exception is for devices sold in the EU where the EU is treated as one country for warranty and support purposes.

The screen doesn't work except on the bottom and i cant reboot it because my power button doesn't work, The screen doesn't work except on the bottom and i cant reboot it because my power button doesn't work

I was in the middle of texting my mom and the screen stopped working! It only stopped working in the middle but i can't even turn it back on because my password numbers won't work when i touch them! I also cannot reboot my ipod because the power button doesn't work! I need help on fixing this problem please!!

Try as best you can with broken button.:
- iOS: Not responding or does not turn on
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iPhone 5 is disabled and the power button doesn't work. How would I fix it?

My iPhone 5 is disabled and the power button doesn't work. How would I fix it? Please Help

wait it for your iPhone to die then before it turns it plug it into iTunes while holding the home button and it will force it into recovery mode.
will be hard to get the timing right cause u will need to wait for the battery to die and charge up again. Other then that just take it to apple and have them replace the device for a fee.

I'm stuck on a safari/app page.My power button or home button doesn't work.What do I do?

I'm stuck on a safari/app page.My power button or home button doesn't work.What do I do?I cant get to the home page or shut it off.

Try the steps here that you can accomplish. You can use this program to place the iPod in recopvery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Ran update this morning. Now power button doesn't work and soft boot brings to the battery/cord icon as if there's no power. Can't get into anything. Any help on this?

Update for Windows was run this morning---it actually made me run it twice. I was initially able to use my phone but now I get nothing but the battery/power cord symbol. The power button doesn't work at all. I have tried soft boot of the down volume and power button. Seems to reboot but same screen appears. I cannot access anything on the phone. Is there any help on this?

Hey there, javadan! Thanks for letting us know about the problem with your software upgrade. I'm very sorry for the issues you're having. Based on the two attempts to process, I would have to say there was a problem with both install attempts. You may need to process a factory reset. Which model device do you have?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Ipad wont reboot & my sleep or lock button doesn't work??

I updated ios 7 on my ipad just yesterday. After a while I used it, then my ipad kept popping out shut down mode, and lock the screen randomly.
I tried to reboot it, my screen kept locking randomly. I tried to reboot it for three times, and for the third time, my ipad wouldn't boot up.
I connected my ipad to itunes and tried to restore my ipad.
The screen now has quitted to lock randomly. But I found out that my lock button doesn't work anymore. And the next thing I did was to reboot my ipad by pressing the sleep/lock and home button at the same time, hoping that my lock button would work again, and suddenly my ipad showed apple logo frequently without showing progress bar. And the last thing I do now is to connect my device to itunes, and it is now back on. But the lock/sleep button still not working. And I think that if I reboot my ipad again, it will give me the same problem as it wont reboot itself unless i connect it to itunes.
Please help me regarding this troubleshooting... My ipad was perfectly fine. Thanks in advance!

Eauddixon wrote:
For the past month or so my lock button hasn't been working. It takes three or more tries to get it to work and sometimes I just can't even use it.
Looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
Be sure to make an appointment first...

My iPod 5th generation won't turn on and my middle button doesn't work

My ipod 5th generation won't turn on and my middle button doesn't work! What will I do? It all starmed when I updated iOS 8. It would be fine but would shut down at random, now it won't turn on at all!!! when I press the lock button to turn it on the Apple sign would come up for about 5/10 minutes!! so what will I do???

Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

T400 ThinkVantage Button doesn't work

Hey, I have a problem with the ThinkVantage Button. I was plan to use Powerquest PartitionMagic 8.0 to create a new partition from my C driver. However, instead of create a new partition I lost the Lenovo driver. After that I realize my ThinkVantage Button doesn’t work anymore. I tried to use Disk Management to refund the lost driver, but it pop out some warning like this “The operation failed to complete because the Disk Managemen console view is not up-to-date.” Could anybody tell me how to make my ThinkVantage Button work again? Thank you very much. System:T400Core 2 Duo 2,26 GHz2 GB DDR3Windows Vista home basic 32x Sorry for my English. Greeting and thanks

Hello nivek, welcome to Lenovo forums!
I think you have messed up your R&R partition, with Pmagic Use gparted instead, it will recognise the R&R partition.
Is your windows installtion already working?
Try the master boot repair kit mentioned by AndyP here.
I would also suggest to call support, for your recovery discs, cause the create R&R disc function seem also down.
Perhaps only a fresh installation, from these discs, would bring back your Blue Button function in your case.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

IMessage send button doesn't work

I can receive instant messages, but the send button doesn't work.

- Make sure have something entered in the Subject fied.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- iOS: Troubleshooting Messages

My iPhone died and wont turn back on. My home button doesn't work to reboot it.

It died last night and I put it on the charger and nothing happens not even the battery symbol comes up. I do have the iOS 7. I can't restart it because my home button doesn't work and i have to use assistive touch. It won't show up on itunes when i tried to plug it in. It's not the charger because it works on my other i-devices. I have an iphone 4.

If the screen and iPod does not show any life then letting the batter drain will not do anything.
If you tried another cable and tried ReBoot on another computer and still problem then your iPod has to be repaired/replaced
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My button doesn't work, and I have two scratches on the bottom, and my iPod won't turn on also I have no more warranty\

My button doesn't work, and I have two scratches on the bottom, and my iPod won't turn on also I have no more warranty

Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem besides the button and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Device Manager ! FN button doesn't work

Similar Messages

Maybe you are looking for