Device Manager v4.6 SP5 release date

Hi, Can you tell me when HP Device Manager v4.6 SP5 will be released to support ThinPro v5.2 ? Unable to capture v5.2 ThinPro with v4.6 SP4 Regards

Interesting, I logged a warranty call (case:4651877501) against one of our new T620's and a HP support guy (DSO Team) phoned me back and said there was a known issue with capturing ThinPro v5.2 using HP device manager v4.6 SP5 If I get some free time, I'll try again Regarding imaging from thinpro 4 to 5.2 the readme for the thinpro 5.2 download says:- 'NOTE: You *MUST* install a thinstate update package (hptc-thinstate-ng version 1.10.3 or later) for ThinPro 4.x and Smart Zero Core 4.x and then reboot before using Automatic Update or Easy Update to install a ThinPro 5.x image onto a device running ThinPro 4.x or Smart Zero Core 4.x. Failure to do so will result in a corrupted image on the client device requiring manual reimaging. Deploying an image via HP Device Manager (version 4.6 SP1 or newer) does not require this update.' This implies if your using HP device manager you should be able to re-image a thinpro 4 device to v5.2 direct It is not until you try this in the HP device manager console, that a warning displays :- Deploying an image of ThinPro 5.2 or later to the device(s) will fail, update to ThinPro 5.0 or 5.1 first It would be good if the readme for ThinPro 5.2 download states this Regards

Similar Messages

  • Apex 2.2 Release Date

    I have been asked by the development manager to provide a release date for apex 2.2. I have searched the forums but have only found a general summer release date. Can anybody provide me with a date or at the very least a month for the release date
    Regards
    Kevin Mann

    Hi Kevin,
    There is no (public) definitive release date for Apex 2.2 yet.
    Any applications you develop using the current Apex release will be able to be migrated to Apex 2.2 without any (major) issues, so I would advise that it's definitely worthwhile learning how the current release works rather than waiting until the 2.2 release comes out before trying to learn it.
    Hope this helps

  • B590 - Switchable Graphics: GF GT720M disabled in Device Manager

    Hello to Lenovo community from  a newcomer!
    I've bought a B590 and installed a Win 7 64bit
    I have installed all available drivers from the support page and have the following issue:
    Device Manager:
    i see 2 graphics devices
    Intel HD Graphics
    NVIDIA GeForce GT 720M
    the discrete card is disabled with error code 43 and has an exclamation mark near it (http://i.imgur.com/pFkjloq.png   sorry my system language is russian)
    Moreover, if i start the NVidia Control Panel it gives me an error with text: "current display is not connected to nvidia GP"
    GeFoerce Experience is not starting with a back-end error (http://i.imgur.com/AmDkHE0.png)
    Now here are the ways i tried to use but it did not help:
    1. Enable high performance and update with manually downloaded nvidia driver
    2. Do the same with HDMI cble connected to a plasma
    3. Disable \ enable the device (screen goes black, than to normal and everything stays the same)
    4. Format c: reinstall Win8.1 64 and install all drivers - same thing 
    5. Format c: reinstall Win7 64  and install the graphics drivers after everything else (h1d9d9.exe h2d903.exe)
    6. Update GT720M drivers  from device manager  (driver is up to date)
    7. Run a high-performance 3D game (War Thunder)  - it uses Intel HD
    What else can i do?
    I saw people with switchable graphics use some kind of application to specify the game-apps that should use a discrete videocard. I don't have such an app to specify my games.
    Any idea?
    Solved!
    Go to Solution.

    hi sweennyy,
    Welcome to Lenovo Community Forums!
       Can you try under Device Manager Uninstall the Intel Graphcis "make sure to place a check on a prompt saying delete driver software for this device" 
       After Uninstalling it do the same on the Nvidia Then restart the system.
    Try repeating the steps untill the Uninstall prompt does not show a check box  "delete driver software for this device"  anymore.
    Do another restart and Install the following in this sequence
    1.  Intel Display Driver  
    2.  NVIDIA Optimus Video Features Driver  
    See if that works
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Analytic Workspace Manager Release date

    Does anyone know that release date for the analytic workspace manager?

    I'm reluctant to start having a go at Oracle, because there's probably good technical reasons why AWM didn't come out last year, most probably due to 9i OLAP API changes invalidating much of the work the product team had done with the prototype of AWM. However, it's been about 18 months now, by my reckoning, since AWM was first talked about and it's still not generally available.
    Of course, the features announced for the first version of AWM are only part of what we need 'out in the field' when working with 9i OLAP. We also need graphical tools to load analytic workspaces directly, rather than having to write OLAP DML dataloaders or go through an intermediate step of loading an Oracle star-schema, and in addition, migration tools for Express databases to help with the creation of OLAP Catalog metadata.
    It's worth contrasting this with the release of OLAP Services when SQL Server 7.0 was released. There, Microsoft provided tools from the outset to create and manage OLAP cubes, which meant that users could get up and running immediately, not have to wait the best part of two years to get the most basic of tools to enable them to create OLAP databases.
    As there's no doubt been quite a few technical challenges in delivering the 9i OLAP tools over the last couple of years, what would probably help the situation would be a more proactive communication strategy from the Oracle product team, in the way that the OWB team regularly post on their OTN forum and keep us all informed on how the product is progressing. Part of the frustration with 9i OLAP is the lack of any communication or updates on the product, leaving us guessing as to exactly when elements such as the AWM will actually come out. In addition, from what I can glean about OLAP support in 10g, there's some excellent news coming out, such as Multiwriter support, an XML interface for OLAP, Parallel support for aggregation and so on, which would be great news to hear and might make people 'hang on' rather than give up on the product.
    Hopefully, as the last announcement from Oracle suggested, the AWM will be made available this month, and we can get on then with helping our customers and clients start taking advantage of the 9i OLAP platform.

  • My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no error

    My DVD drive not reading DVDs, but can read some DVDs with data on it. Device manager shows no errors.
    I tried to reinstall driver.
    I downloaded new codec
    I tried Microsoft FIX IT
     Nothing worked.
    Need some help.
    Thank you!!
    Paul

    Hi Albos, This is a known problem. These superdrives die after a while. See the various threads on this site and the internet. I have the same problem with my Imac 20" 2.16 ghz. Just wants to burn and read cd's. Its has to do with the laser. For DVD an CD are two different laser and the one for DVD's has probably died in yours (as it did in mine). I bought an external LG burner and problem solved. (And a lot cheaper than replacing the superdrive)
    Hope this helps you.
    Robert

  • Microsoft Azure Monitoring Services Management Library stable release date

    With the general availability of autoscale and the Microsoft Azure Management Libraries, what's the timeline on the general availability of Microsoft Azure Monitoring Services Management Library? Is there an estimated release date for v1.0?

    We have the preview release for the API/REST and a Nuget package
    REST/API
    http://msdn.microsoft.com/en-us/library/azure/dn510374.aspx
    Nuget
    http://www.nuget.org/packages/Microsoft.WindowsAzure.Management.Monitoring/0.10.0-preview
    Johnny Coleman [MSFT] Any code posted to this Forum is [As-Is] With No Warranties

  • Transfering data using switch device manager from old palm to new curve 8330....please help!!!

    Trying for hours to import data using switch device manager from old Palm Treo and Palm Desktop 4.2 to my new Blackberry Curve 8330.  Blackberry seem to connect...but second step of choising Palm or Mircrosort will not allow me to select anything.  I do not believe Palm is connecting...Is my palm to old?  If I cannot tranfer data this way, especially contacts is there any other way besides entering it into Blackberry one by one?

    Hi there!
    If the device switch wizard is not working, check this KB to be sure all of your Palm things are compatible and that you are using the correct process:
    KB05459 How to use the Switch Device Wizard to switch from another smartphone to a BlackBerry smartphone
    And then see this KB for some troubleshooting help
    KB10722 BlackBerry Desktop Manager does not detect the Palm software when using the Switch Device Wizard
    And if it happens that it will not work, then you will have to find out how to export from your Palm to an ASCII or CSV file...then you can import it with this process:
    KB11194 How to import contacts from an CSV file to the BlackBerry device
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Search in device manager for driver updated on a certain date.

    How do I search for a driver I updated on 06/13/2014 so I can roll it back ? I can't remember which one it is. I was trying to download a game. The update slowed my machine way down and the print is much smaller.

    Hi,
    I’m sorry to tell you that you can’t find the driver in Device Manager by the way you said.
    You can open Control Panel\System and Security\Windows Update
    and click View Update History, then find the update according to
    Date Installed.
    Also you can start computer and typing F8, then click
    Repair Your Computer to perform System Restore to fix this issue.

  • Mozilla's Web O'(pen) Wonder says video card driver is out of date, but Device Manager says it is up to date.

    I have recently upgraded to Firefox 4, and I must say that I love it (:
    Although, I want to try out Mozilla's Web O'(pen) Wonder, but it gives me this message :
    Unfortunately, while your browser supports WebGL, your video drivers may be too old. To view any of the demos tagged with WebGL, try updating your drivers at NVIDIA, AMD, and Intel.
    You can still watch screencasts of the WebGL demos or fully experience our other non-WebGL demos without updating
    The problem is that my Device Manager says that my video card is the latest available.
    What do I do now?

    11 people have this problem now. What video cards supports WebGL?

  • When I download a podcast on my iPhone why is the release date missing? This really screws up the sort order.

    when I download a podcast on my iPhone why is the release date missing? This really screws up the sort order.

    Hello yung ron,
    It may be that your iPhone's set to sync automatically, which can potentially remove any music that's been added to the device. It may help to set the device to 'manual mode,' so that you have complete and total control over what content is on the device.
    Managing content manually on iPhone, iPad, and iPod
    http://support.apple.com/kb/HT1535
    Cheers,
    Allen

  • How do you browse the catalog by release date? I would like to see all the new releases in specific catagories but it seems that feature went away. Or can you browse the whole catalog by release date?

    It appears that you can not browse the catalog by release date or see all the new additions to the catalog.

    Hi zrxix,
    Happy New Year! In the iBooks application on your Mac, if you pick a category, like "Best of 2014" or "Best New Fiction" then click on the "See All" link on the right side of the page, you can choose to sort by name, release date, or featured.
    Frequently asked questions about iBooks - Apple Support
    http://support.apple.com/en-us/HT5557
    Buy and download books
    If you have an active Internet connection, you can access the iBooks Store:
    On iOS devices with iBooks 3.2 or earlier, open iBooks and tap the Store button.
    On iOS devices with iBooks 4.0 or later, you can access the iBooks Store with the icons on the bottom of the iBooks screen.
    On OS X Mavericks or later, open iBooks and click the iBooks Store button.
    From the iBooks Store, you can browse by title, author, or genre. You can also see featured books and books available on the New York Times bestseller lists (United States only). Tap a book to see more details and download a free sample.
    How can I see which books are on the New York Times bestseller lists? (United States only)
    From the iBooks Store, select NYTimes to view the weekly top fiction and nonfiction hardcover books. If a New York Times bestseller book isn't available for download from the iBooks Store, it won't be on the list.
    What's the typical file size for books from the iBooks Store?
    The typical book is about 2 MB. Books that contain enhanced features, such as audio or video, vary in size depending on the content. Enhanced books might take longer to download or require a Wi-Fi connection to purchase.
    The iBooks Store also offers textbooks that might be as large as 1 to 2 GB in file size. You might need a Wi-Fi connection to download them from an iOS device. Download times for textbooks vary depending on your Internet connection.
    What digital book file types does iBooks recognize?
    iBooks supports the EPUB file format and PDFs.
    iBooks 2.0 or later also supports the iBooks format used in iBooks Author.
    Other digital book file types aren't supported at this time.
    Some PDFs might not be compatible with iBooks. If you want to add books and PDFs from outside the iBooks Store to iBooks, they need to be DRM-free. You can sync them using iTunes 10.5.3 or later.
    Can I download books from other websites?
    Yes, you can download EPUB and PDF files on your Mac or PC. To add them to your iTunes library, choose File > Add to Library, or drag the EPUB or PDF file to the Books library on your computer. If you're using OS X Mavericks or later, you can add them to your library in iBooks. To read your books, sync them to your device. The books must be in one of the above supported formats.
    Can I purchase a book from my computer?
    In certain countries you can browse and purchase books from the iTunes Store on your computer. You can also purchase books from iBooks in OS X Mavericks or later.
    Can I copy my books to other computers or devices?
    You can automatically download new purchases to your other computers or devices by turning on Automatic Downloads.
    Are book samples from the iBooks Store downloaded to iBooks?
    Yes, when you tap Get Sample for a book in the iBooks Store, iBooks downloads an excerpt from the book to your library. After reading the sample, you can buy or download the complete book from the last page of the sample. If you get the complete book, it replaces the sample in your library.
    Is there a limit to the number of books I can have?
    The number of books you can have in iBooks depends on the space available on your device. iBooks doesn't limit the number of books in your library.
    Can I gift a book?
    Yes, you can gift books.
    Manage your previously purchased books
    Depending on your settings, you can see all of your purchased books in your library:
    In iBooks 3.0–3.2, turn on Show all Purchases in the Collections menu.
    In iBooks 4.0 or later, turn off Hide iCloud Books in the Collections menu.
    In OS X Mavericks or later, turn on Show Purchases in iCloud in the View menu.
    Can I download my previously purchased book again at no additional cost?
    You can download past purchases from the iBooks Store at no additional cost. Here's how to download a book again:
    Log in to the iBooks Store using the Apple ID that you originally used to purchase the book.
    Go to the Purchased page.
    On an iOS device, tap Store (if you're using iBooks 3.2 or earlier), then tap Purchased.
    On OS X Mavericks or later, click iBooks Store, then Purchased under Quick Links.
    Find the book you want to download again. It should have an iCloud badge.
    Tap the cover of the book to download it to your device.
    Learn more about downloading past book purchases to your computer. Previous purchases might be unavailable if they are no longer on the iBooks Store. Downloading previous purchases isn't compatible with iPhone 4 (CDMA Model).
    Can I back up the books I purchased?
    Yes, any books you download from the iBooks Store are automatically added to your iTunes library the next time you sync your device with your computer. To sync, use a computer authorized with the same Apple ID that you used to download the books from the iBooks Store.
    What happens if a publisher updates their book on the iBooks Store?
    If the publisher updates a book, iBooks for iOS (v3.0 or later) and iBooks for Mac offer free updates to your iBooks purchases.
    Organize your library
    To rearrange books in your iBooks library, touch and hold a book, then move it where you want it. You can also sort books in iBooks by switching to List view and tapping Most Recent, Titles, Authors, or Categories.
    You can also organize your books these ways:
    A grid or list view.
    Specific collections based on a topic. For example, you can put all your books and PDFs related to your work in a single collection.
    To use Collections, tap the Collections button, or the name of the collection on your iPhone or iPod touch to change or add new collections.
    Do more with your books
    You can set up how you want your books to appear, add bookmarks, share your thoughts, and more.
    Do books from the iBooks Store have any accessibility features?
    You can enjoy books downloaded from the iBooks Store using the accessibility features built into iPad and iPhone or iPod touch.
    Can iBooks open books in different languages?
    Yes, iBooks can display books written in many languages.
    Can I view textbooks in iBooks?
    Yes, you can see interactive books on iBooks for iOS (v2.0 or later) on the iPad and iBooks for Mac (v1.0 or later). Interactive books include study cards, glossary cards, and more.
    Can iBooks play audio or video included with books?
    Yes, enhanced books can automatically play audio or video in the book.
    Can iBooks read books aloud?
    Yes, you can use the read-aloud feature included in select children's books from the iBooks Store. With the read-aloud feature, a real narrator reads the book to you and, in some books, highlights the words as you read along.
    Can iBooks open illustrated books?
    Yes, you can see illustrated books (such as children's books, cookbooks, and art books) on your compatible iOS device or Mac using OS X Mavericks or later.
    Can I bookmark and save my page?
    Yes, iBooks automatically remembers where you left off each time you close a book or return to your Home screen. On your iPhone, iPad, or iPod touch, tap the bookmark icon in the upper-right corner to bookmark a specific page. On your Mac, select Edit > Add Bookmark.
    You can wirelessly sync your Bookmarks, Highlights, and Notes with your other devices using your iTunes Store account. In iBooks 4.0 or later on your iOS device, tap Settings > iBooks > Sync Bookmarks and Notes > On. If you're using an earlier version of iBooks, tap Settings > iBooks > Sync Bookmarks > On. To sync from your Mac, choose iBooks > Preferences and select "Sync bookmarks, highlights, and collections across devices."
    Can I highlight text and make notes?
    Yes, iBooks includes Highlight and Note features. You can highlight any text within a book. Then you can create a Note from your highlighted selection.
    See your Highlights and Notes:
    Tap the Table of Contents button.
    Tap Bookmarks. Highlights and Notes appear in their own section under Bookmarks.
    Can I share my thoughts about my books with my friends?
    In iBooks for iOS 3.0 or later and in iBooks for Mac, you can share highlights and selections on Facebook, Twitter, Messages, or Mail.
    Can I change the appearance of my books?
    You can change EPUB books, but not PDFs or books created with iBooks Author. Here's what you can adjust:
    Set the font size and choose from five included fonts.
    Adjust the brightness of the device's display to comfortably read your books in any lighting. In iBooks 4.0 or later, you can use the following themes: White, Sepia, and Night. Select the Night option within iBooks to read books in the dark. You can turn on the Auto-Night theme to automatically switch to the Night theme in low light.
    Change the appearance of books by adjusting the contrast setting on your iOS device. To adjust the contrast, tap General > Accessibility and select White on Black. When you open iBooks, you books will have white text on a black background.
    In iBooks 3.2 or later, you can use the Scrolling View to read your books in a continuous scroll. You can use this feature in any theme.
    Can I read my books while my device is in airplane mode?
    Yes, you can read your books while the device is in airplane mode. You don't need an Internet connection to read books downloaded to your library.
    Does iBooks include a dictionary?
    Yes, iBooks allows you to look up the definition of words using an English, German, Spanish, French, Simplified Chinese, or Japanese language dictionary.
    Can I install and use custom fonts?
    No, not at this time.
    Can I print my books and PDFs from iBooks?
    You can print PDFs and notes you've entered from iBooks; however, you can't print EPUB books.2 You can also email PDFs and notes you've written from iBooks.
    Printing from iBooks requires an iPad, Phone, or iPod touch with iOS 4.2 or later and iBooks 1.2 or later with a supported AirPrint printer. iOS 4.2 and iBooks 1.2 aren't compatible with original iPhone or iPod touch (1st generation).
    Can I pinch a book closed?
    In iBooks 4.0 or later, you can pinch a book closed on iPhone, iPad, and iPod touch.
    Will the Kindle app or other eBook readers for iPhone work on iPad?
    Kindle and most eBook reader apps designed for iPhone or iPod touch should work with iPad. Books downloaded from the Kindle Store and other books that aren't in a DRM-free standard EPUB format aren't compatible with iBooks.
    Last Modified: Oct 31, 2014
    Happy reading!
    - Judy

  • Feb 21st release date for PlayBook 2.0 was just confirmed publicly

    Feb 21st release date for PlayBook 2.0 was just confirmed publicly by Angel Aldana (RIM Manager Latin America Alliances) during the webcast "Developing Native Games with BlackBerry NdK 2.0".
    tick tick tick
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

    Best Buy showcase:
    http://www.bestbuy.ca/en-CA/research/blackberry-playbook-with-playbook-os-2-0/rc8584.aspx?path=eace3...
    Future Techspot:
    http://www.futureshop.ca/en-CA/research/one-little-tablet-packed-with-the-best-of-blackberry/rc9372....
    All get ready for the arrival of OS2.0
    TUESDAY MORNING

  • FWSM missing under Campus Manager Device Management

    Hello everyone,
    We are running LMS 3.2 with CM, CS, RME, etc. patched to the latest release.
    Under Campus Manager -> Admin -> Data Collection -> Device Management -> Include Devices, all available devices have been added. However, our Firewall Service Module (and some other ones) are missing from the list of included devices.
    The FWSM is listed under DCR and RME though. It passes and runs inventory collections and SNMP credential checks. The FWSM is running code version 4.1(1).
    Is this normal behavior or should it be possible to add it to the list in CM?
    Thank you.

    Yes, this is expected.  Campus Manager does not support firewall devices like the FWSM, PIX, and ASA as they do not support CDP.

  • Device manager - GEN2 hardware info ? :-)

    hi,
    I have two questions:
    1. who provides device manager information,
    is it the hardware provider ?
    2. Anyone has a list of supported hardware
    for AII 4.0 (so gen2) - readers, printers
    or maybe someone could share the names
    of the ones he/she used in this projects? 
    (I'm mainly interested in thos working in Europe
    but the ones that work in the USA are also welcomed)
    Thanks
    Regards,
    michal

    Hi Michal,
    I am not aware of hardware for SAP AII 4.0. But here is the information which may probably help you, Zebra Technologies, a global leader in on-demand printing solutions for business improvement, introduced the world's first RFID smart label printer/encoders designed to interoperate with SAP AG's Auto-ID Infrastructure(AII)v2.1.
    The new Zebra XML-based solution enables SAP users to implement compliant "slap-and-ship" RFID solutions, without costly middleware and associated integration efforts. SAP's AII v2.1 enables RFID-based supply chain management (SCM) and supply chain execution (SCE) processes across the enterprise.
    Zebra co-defined and co-developed the data, protocol, and process elements of smart label creation within SAP's AII v2.1 and today offers the only RFID printer/encoders that directly interoperate with the SAP application.
    This is the link of the press release
    http://www.zebra.com/id/zebra/na/en/documentlibrary/pressreleases/2005/rfid_printer_encoders.File.tmp/011705_SAP_RFID_printer.pdf
    Hope this information is useful to you
    Thanks & Regards,
    Pawan P.Khilari

  • [solved] Digital Camera not recognized in device-manager

    My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
    $ groups
    wheel storage users printadmin
    The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
    The Powershot SX 120 has a  MTP/PTP connection mode (as the manual says). But:
    # mtp-detect
    Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
    Listing raw device(s)
    No raw devices found.
    gphoto succeed:
    $ gphoto2 --auto-detect
    Modell Port
    Canon PowerShot SX120 IS usb:002,019
    A gphoto --summary could be found here
    There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
    # Canon PowerShot SX120AX (PTP/MTP mode)
    ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
    The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
    The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
    With my udev-rule:
    solid-hardware listen
    Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
    Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
    Listening to add/remove events:
    Device Added:
    udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
    Without the active udev-rule, "solid-hardware listen" produces nothing, but
    udevadm monitor
    monitor will print the received events for:
    UDEV - the event which udev sends out after rule processing
    KERNEL - the kernel uevent
    KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
    KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
    UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
    UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
    Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
    With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
    $ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
    QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
    gwenview_importer: Missing required source folder argument.
      (don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
    Last edited by quiqueck (2014-02-26 20:10:25)

    I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details

Maybe you are looking for