Device memory has errors

My device displays built in media storage not accessibl due to errors. I tried repair and format but all faile. My device memory status cannot be displayed. Pls I need your help.
Solved!
Go to Solution.

Hello,
Given what you describe and the remedy you have already attempted, your BB likely has a hardware-level problem that cannot be addressed at this internet distance. Only hands-on by a qualified BB technician can possibly determine what to now do. If your BB is brand new, you should go back to the seller and enforce the terms of your warranty.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Error message: "The share operation Apple Devices 1080p has failed"

Hey,
I have a MacBook Air, OS X version 10.9.3, running Mavericks, with 1.7 GHz and 8 GB memory. I'm running FCPX 10.0.8.
I've had no problems rendering and exporting all sorts of movies and short clips over the last few months, however every time I try to export my last clip, this message shows up after the clip is 10% done exporting: "The share operation Apple Devices 1080p has failed QuickTime Error: - 50"
I've already clicked on "prevent app nap" under Get Info for FCPX.
Does anyone have any idea what's going on, or can offer a solution to this?
Thanks so much!
Terra

Since you have already checked the Prevent App Nap box I assume you have seen this thread: https://discussions.apple.com/message/21920134#21920134
Seems likely to me that either one of the files in your timeline is giving you trouble or a render in your timeline is giving you trouble. I sometimes randomly run in to export errors with transitions or titles. Sometimes removing the effect/title from the timeline, deleting the render files or copying and pasting the timeline in to a new project can fix it.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)

Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

AMDS for Windows
http://support.apple.com/kb/TS1567

10g XE: ORA-27102: out of memory, Linux Error: 28: No space left on device

Hi,
I just installed oracle-xe-10.2.0.1-1.0.i386.rpm on a virtual CentOS box. After I run "/etc/init.d/oracle-xe configure", only listener is running, not the instance itself and $ORACLE_HOME/config/log/CloneRmanRestore.log says
ORA-27102: out of memory
Linux Error: 28: No space left on device
According to installation requirements (http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm) I checked
RAM and swap:
[root@56 ~]# free -m
total used free shared buffers cached
Mem: 7961 7453 507 0 39 923
-/+ buffers/cache: 6491 1470
Swap: 16378 7012 9366
Available disk space:
[root@56 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/vzfs 2.9G 969M 1.9G 34% /
Kernel params:
[root@56 ~]# sysctl -a | egrep 'sem|shm'
error: "Operation not permitted" reading key "kernel.cap-bound"
kernel.sem = 250 32000 100 128
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 536870912
So it all looks to be OK.
Any ideas what can be wrong?
Thanks,
Radek

rskokan wrote:
The distro version is "CentOS release 5.4 (Final)".
Unfortunately the wmem/rmem params can't be changed, as I learned it's a limitation of the virtual hosting, Virtuozzo. Anyway they are "just" for network setting, not for RAM.Yes - but worthy of noting once you run into your next problem. :-)
>
Couldn't be the problem that I really don't have enough disk space? Only 1.9 GB free.It's unlikely.
I suspect that the SHMMAX setting needs to be increased to 1/2 physical RAM, as described in the doc I referenced.
I suspect the installer is looking at the physical RAM and guessing the target SGA size based on that. It would therefore assume, for DB creation, that it should crank the SGA to around 700MB (1GB max, leave some for PGA, but use some SGA because of SHared Server for APEX)

Need HELP with silverlight 8.1!WinRT information: The GPU device instance has been suspended.

I have a winrt program and it works fine.
Then I need this program to support silverlight 8.1.
Then I meet a issue:When I draw something using d3d and loading texture async, my program crashes with
Unhandled exception at 0x775035D7 in AgHost.exe: Microsoft C++ exception: Platform::COMException ^ at memory location 0x0288F150. HRESULT:0x887A0005 The GPU device instance has been suspended. Use GetDeviceRemovedReason to determine the appropriate
action.
WinRT information: The GPU device instance has been suspended. Use GetDeviceRemovedReason to determine the appropriate action.
However, I try to run this program in emulator, it works fine.This confused me.
Could anyone tell me Why this happened?My testing device is Lumia Icon

Hi Y.H.King,
You mean the same code works fine on Windows Phone runtime real device also Windows Phone Silverlight 8.1 Emulator but does not work with Windows Phone Silverlight 8.1 real device? Both on the same device?
However a strange question is you are applying the code to Silverlight app, but your error information seems to be WinRT information. And which Lumia device are you using?
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

X6 mass memory full error

I want to copy some MP3 files to the X6 phone mass memory through windows explorer but it give me a memory full error message.
Before I start to copy, it indicated 8.40G free out of 15.0G (not sure why it is 15G), but once I start to copy, it pops up the error message. I disconnect the phone and use the phone file manager to check and it has about 8.4G free. Try it again, the same happened.
While in windows explorer it indicated it is full full, under the ovi suite->view->device information, it has 8,4G free! I know I have the space because I deleted a lot of files recently.
Firmware: V21.0.004. OS: Windows 7

I received an email from Nokia support about the issue however unfortunately their advice was useless...
I will copy/paste it here in-case it might be useful to anyone else.
Thank you for contacting Nokia Care.
We sincerely apologise for any inconvenience this issue may have caused you. In response to your concern with your device, the phone notifies you if the phone memory is getting low.
To free phone memory, transfer data to a mass memory in the File mgr application. Mark files to be moved, select Move to folder (or Organise > Move to folder) and then the destination folder.
In order to free memory, you could also remove or move the following:
a. Messages from Inbox, Drafts and Sent folders in Messaging
b. Retrieved e-mail messages from the phone memory Saved Web pages. Clear the web browser cache to free some memory.
c. Saved images, videos, or sound files
d.Contact information
e.Calendar notes
f.Downloaded application packages
g.If there are applications which are not needed any more, uninstall them
h.Any other data that you no longer need
If possible, use the mass memory instead of phone memory in the Camera application. You can also use Image Store available in the Nokia PC Suite or Ovi Suite to transfer images and video clips for example to a compatible PC.
If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first or Memory low. Delete some data, try deleting items one by one (starting from the smallest item).
For future reference, please feel free to check our website. Kindly refer to the link below:
http://www.nokia.co.uk/home
You may also call our Customer Care Hotline at 0845 -045-5555,
Mon-Fri 9am - 7pm (except bank and public holidays)
Please do not hesitate to contact us again if you have any questions.
Yours sincerely,
Jacklyn B.
Nokia Service Professional
UK & Ireland Team
Nokia Care

Hv_balloon: hot_add memory failed error is -12

Oracle Linux 6.5
Oracle Linux Server Unbreakable Enterprise Kernel (3.8.13-44.1.1.el6uek.x86_64)
[root@node1 /]# cat /etc/udev/rules.d/100-balloon.rules
SUBSYSTEM=="memory", ACTION=="add", ATTR{state}="online"
dmesg:
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:   90, btch: 15 usd:   0
active_anon:5307 inactive_anon:6072 isolated_anon:0
active_file:688 inactive_file:685 isolated_file:0
unevictable:0 dirty:91 writeback:0 unstable:0
free:2060 slab_reclaimable:2887 slab_unreclaimable:10478
mapped:233 shmem:0 pagetables:571 bounce:0
free_cma:0
Node 0 DMA free:1184kB min:120kB low:148kB high:180kB active_anon:144kB inactive_anon:136kB active_file:8kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15648kB managed:15904kB mlocked:0kB dirty:0kB writeback:0kB mapped:4kB
shmem:0kB slab_reclaimable:12kB slab_unreclaimable:28kB kernel_stack:16kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:40 all_unreclaimable? no
lowmem_reserve[]: 0 236 236 236
Node 0 DMA32 free:7056kB min:1904kB low:2380kB high:2856kB active_anon:21084kB inactive_anon:24152kB active_file:2744kB inactive_file:2740kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:241856kB managed:199012kB mlocked:0kB dirty:364kB writeback:0kB
mapped:928kB shmem:0kB slab_reclaimable:11536kB slab_unreclaimable:41884kB kernel_stack:1384kB pagetables:2284kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 26*4kB (EM) 6*8kB (UEM) 3*16kB (UM) 3*32kB (UE) 4*64kB (UEM) 5*128kB (UM) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1192kB
Node 0 DMA32: 1187*4kB (UEM) 185*8kB (UEM) 50*16kB (EM) 1*32kB (M) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 7060kB
3387 total pagecache pages
2013 pages in swap cache
Swap cache stats: add 1733535, delete 1731522, find 721341/899123
Free swap = 3956392kB
Total swap = 4095996kB
65504 pages RAM
6172 pages reserved
264147 pages shared
53026 pages non-shared
hv_balloon: hot_add memory failed error is -12
hv_balloon: Memory hot add failed
init_memory_mapping: [mem 0x18000000-0x1fffffff]
[mem 0x18000000-0x1fffffff] page 2M
kworker/0:1: page allocation failure: order:9, mode:0x80d0
Pid: 5507, comm: kworker/0:1 Tainted: G        W    3.8.13-44.1.1.el6uek.x86_64 #2
Call Trace:
[<ffffffff81135513>] warn_alloc_failed+0xf3/0x160
[<ffffffff81138310>] ? __alloc_pages_direct_compact+0x90/0x200
[<ffffffff810c0423>] ? on_each_cpu_mask+0x53/0x70
[<ffffffff81138926>] __alloc_pages_slowpath+0x4a6/0x7b0
[<ffffffff81138f2b>] __alloc_pages_nodemask+0x2fb/0x320
[<ffffffff81593e94>] vmemmap_alloc_block+0x63/0xd3
[<ffffffff815940fa>] vmemmap_alloc_block_buf+0x30/0x3b
[<ffffffff8159157a>] vmemmap_populate+0x12d/0x251
[<ffffffff81593dc3>] sparse_mem_map_populate+0x2a/0x3c
[<ffffffff81593bcc>] sparse_add_one_section+0x68/0x13b
[<ffffffff815947bf>] __add_section+0x61/0xa7
[<ffffffff81583e0a>] __add_pages+0x6a/0x90
[<ffffffff8104b561>] arch_add_memory+0x71/0xf0
[<ffffffff81583fba>] add_memory+0xba/0x1d0
[<ffffffffa0235736>] hv_mem_hot_add+0xa6/0x140 [hv_balloon]
[<ffffffffa0235859>] handle_pg_range+0x89/0x150 [hv_balloon]
[<ffffffffa0235990>] process_hot_add+0x70/0x140 [hv_balloon]
[<ffffffffa0235ba7>] hot_add_req+0x147/0x160 [hv_balloon]
[<ffffffff8107bbc0>] process_one_work+0x180/0x420
[<ffffffff8107dbfe>] worker_thread+0x12e/0x390
[<ffffffff8107dad0>] ? manage_workers+0x180/0x180
[<ffffffff81082f4e>] kthread+0xce/0xe0
[<ffffffff81082e80>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff815a09ac>] ret_from_fork+0x7c/0xb0
[<ffffffff81082e80>] ? kthread_freezable_should_stop+0x70/0x70
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:   90, btch: 15 usd:   0
active_anon:6160 inactive_anon:6871 isolated_anon:32
active_file:191 inactive_file:181 isolated_file:0
unevictable:0 dirty:0 writeback:7 unstable:0
free:1543 slab_reclaimable:2800 slab_unreclaimable:10397
mapped:133 shmem:0 pagetables:571 bounce:0
free_cma:0
Node 0 DMA free:1100kB min:120kB low:148kB high:180kB active_anon:144kB inactive_anon:180kB active_file:8kB inactive_file:44kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15648kB managed:15904kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB
shmem:0kB slab_reclaimable:8kB slab_unreclaimable:28kB kernel_stack:16kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 236 236 236
Node 0 DMA32 free:5072kB min:1904kB low:2380kB high:2856kB active_anon:24496kB inactive_anon:27304kB active_file:756kB inactive_file:680kB unevictable:0kB isolated(anon):128kB isolated(file):0kB present:241856kB managed:199012kB mlocked:0kB dirty:0kB writeback:32kB
mapped:532kB shmem:0kB slab_reclaimable:11192kB slab_unreclaimable:41560kB kernel_stack:1384kB pagetables:2284kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 4*4kB (M) 4*8kB (UM) 4*16kB (UM) 3*32kB (UE) 4*64kB (UEM) 5*128kB (UM) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1104kB
Node 0 DMA32: 830*4kB (UEM) 111*8kB (UEM) 48*16kB (EM) 3*32kB (M) 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 5072kB
2794 total pagecache pages
2434 pages in swap cache
Swap cache stats: add 1737324, delete 1734890, find 723647/901845
Free swap = 3961464kB
Total swap = 4095996kB
65504 pages RAM
6172 pages reserved
263070 pages shared
54538 pages non-shared
hv_balloon: hot_add memory failed error is -12
hv_balloon: Memory hot add failed
init_memory_mapping: [mem 0x18000000-0x1fffffff]
[mem 0x18000000-0x1fffffff] page 2M
kworker/0:1: page allocation failure: order:9, mode:0x80d0
Pid: 5507, comm: kworker/0:1 Tainted: G        W    3.8.13-44.1.1.el6uek.x86_64 #2
Call Trace:
[<ffffffff81135513>] warn_alloc_failed+0xf3/0x160
[<ffffffff8113847a>] ? __alloc_pages_direct_compact+0x1fa/0x200
[<ffffffff81138926>] __alloc_pages_slowpath+0x4a6/0x7b0
[<ffffffff81138f2b>] __alloc_pages_nodemask+0x2fb/0x320
[<ffffffff81593e94>] vmemmap_alloc_block+0x63/0xd3
[<ffffffff815940fa>] vmemmap_alloc_block_buf+0x30/0x3b
[<ffffffff8159157a>] vmemmap_populate+0x12d/0x251
[<ffffffff81593dc3>] sparse_mem_map_populate+0x2a/0x3c
[<ffffffff81593bcc>] sparse_add_one_section+0x68/0x13b
[<ffffffff815947bf>] __add_section+0x61/0xa7
[<ffffffff81583e0a>] __add_pages+0x6a/0x90
[<ffffffff8104b561>] arch_add_memory+0x71/0xf0
[<ffffffff81583fba>] add_memory+0xba/0x1d0
[<ffffffffa0235736>] hv_mem_hot_add+0xa6/0x140 [hv_balloon]
[<ffffffffa0235859>] handle_pg_range+0x89/0x150 [hv_balloon]
[<ffffffffa0235990>] process_hot_add+0x70/0x140 [hv_balloon]
[<ffffffffa0235ba7>] hot_add_req+0x147/0x160 [hv_balloon]
[<ffffffff8107bbc0>] process_one_work+0x180/0x420
[<ffffffff8107dbfe>] worker_thread+0x12e/0x390
[<ffffffff8107dad0>] ? manage_workers+0x180/0x180
[<ffffffff81082f4e>] kthread+0xce/0xe0
[<ffffffff81082e80>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff815a09ac>] ret_from_fork+0x7c/0xb0
[<ffffffff81082e80>] ? kthread_freezable_should_stop+0x70/0x70
Mem-Info:
Node 0 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
Node 0 DMA32 per-cpu:
CPU    0: hi:   90, btch: 15 usd:   0
active_anon:5503 inactive_anon:6074 isolated_anon:4
active_file:464 inactive_file:464 isolated_file:0
unevictable:0 dirty:38 writeback:0 unstable:0
free:2355 slab_reclaimable:2822 slab_unreclaimable:10480
mapped:246 shmem:0 pagetables:571 bounce:0
free_cma:0
Node 0 DMA free:1188kB min:120kB low:148kB high:180kB active_anon:80kB inactive_anon:200kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15648kB managed:15904kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB
shmem:0kB slab_reclaimable:12kB slab_unreclaimable:28kB kernel_stack:16kB pagetables:0kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:52 all_unreclaimable? no
lowmem_reserve[]: 0 236 236 236
Node 0 DMA32 free:8232kB min:1904kB low:2380kB high:2856kB active_anon:21932kB inactive_anon:24096kB active_file:1856kB inactive_file:1856kB unevictable:0kB isolated(anon):16kB isolated(file):0kB present:241856kB managed:199012kB mlocked:0kB dirty:152kB writeback:0kB
mapped:984kB shmem:0kB slab_reclaimable:11276kB slab_unreclaimable:41892kB kernel_stack:1384kB pagetables:2284kB unstable:0kB bounce:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
Node 0 DMA: 26*4kB (M) 4*8kB (UEM) 6*16kB (UEM) 4*32kB (UEM) 3*64kB (UM) 5*128kB (UM) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 1192kB
Node 0 DMA32: 1306*4kB (EM) 258*8kB (UEM) 60*16kB (UEM) 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 8248kB
3134 total pagecache pages
2210 pages in swap cache
Swap cache stats: add 1834737, delete 1832527, find 764692/953005
Free swap = 3956436kB
Total swap = 4095996kB
65504 pages RAM
6172 pages reserved
264363 pages shared
52799 pages non-shared
hv_balloon: hot_add memory failed error is -12
hv_balloon: Memory hot add failed

It seems after a Linux VM reboot hot-add is working, but... every time it reaches 500 MB it raises a kernel panic. Minimum memory is set to 128 MB, maximum 4096 MB, startup 256 MB. I don't know what information to collect about the kernel panic.
In /var/log/messages before the kernel panic I see:
Oct 16 01:31:53 node1 rpc.statd[1181]: Version 1.2.3 starting
Oct 16 01:31:53 node1 sm-notify[1182]: Version 1.2.3 starting
Oct 16 01:32:27 node1 kernel: hv_balloon: Received INFO_TYPE_MAX_PAGE_CNT
Oct 16 01:32:27 node1 kernel: hv_balloon: Data Size is 8
Oct 16 01:40:04 node1 kernel: init_memory_mapping: [mem 0x18000000-0x1fffffff]
Oct 16 01:40:04 node1 kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 63617
Oct 16 01:40:04 node1 kernel: Policy zone: DMA32
Oct 16 01:40:04 node1 kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 96385
Oct 16 01:40:04 node1 kernel: Policy zone: Normal
Oct 16 01:40:22 node1 kernel: init_memory_mapping: [mem 0x20000000-0x27ffffff]
Oct 16 01:40:22 node1 udevd-work[1343]: error opening ATTR{/sys/devices/system/memory/memory4/state} for writing: No such file or directory
Oct 16 01:41:35 node1 kernel: nr_pdflush_threads exported in /proc is scheduled for removal
Oct 16 01:41:35 node1 kernel: sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to
[email protected]
Indeed, /sys/devices/system/memory/memory4 does not exists (only memory1 and memory2).

XP PC Does not see Media Card. Device Memory and Media Card are not available.....

I am starting a new thread because the old one was marked as resolved and it isn't.
My Windows XP desktop is no longer seeing my BB Storm Media Card. I am getting the error:
"Device Memory and Media Card are not available because the Mass Storage is currently in use."
I have followed these directions:
Options > Memory >
Media Card Supoport - ON
Media Transfer Protocol (MTP) - ON
Mass Storage Mode Support - ON
Auto Enable Mass Storage Mode When Connected - YES
SAVE
I have application free pace 8.1 MB
and the error message:
"Device Memory and Media Card are not available because the Mass Storage is currently in use."
The card is there and is seen by my BB Storm. Media > Explore
I have removed and reinstalled the card.
On the desktop I have tried Explore as well as Disk Management and nothing shows up for the Media Card although the Blackberry itself is present.
Please help.

Hi there!
Give this KB a try perhaps?
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Backup causing Memory Critical error

I have noticed that my Phone has been rebooting on me every night for the past week or so. I have no idea what is causing it, but I tried to put it into Airplane mode for the last few nights to see if that would fix the problem. Well, it didn't reboot on me, but once I turn off airplane mode, the phone would freeze on me and i would have to perform a hard reboot. I am not sure exactly what is happening, but I then loaded up the Backup app and found another issue...
It seems like my Palm Profile backup app is causing some major memory errors. Every time I try to run backup, I get "memory critical" errors that freezes my device and I have to do a forced reboot. I have even tried to doctor my phone and it doesn't seem to help.
I can try to send along any log files as needed, but any idea why the backup app would be causing these errors?
Adam
Post relates to: Pre p100eww (Sprint)

Hello,
It appears I've been experiencing the same issue. I noticed I was randomly getting critical memory issues with no apps open. I couldn't figure out what was causing it. Through this, the phone gets quite hot and then just freezes on whatever screen it is on.
Is this due to the recent server authentication changes that HP announced regarding webOS devices? It's causing my phone to crash pretty regularly in the morning and it's very inconvenient.
Thanks!
Chris
EDIT: Just saw my automatically-assigned avatar. Apparently I'm a kitten head... LOL

NMI: Parity Check / Memory Parity Errors on Lenovo T500 2082-58M running Windows XP.

NMI: Parity Check / Memory Parity Errors are occurring on
five out of five Lenovo T500 laptops 2082-58M tested.
I can get the error to re-occur consistently by installing
IBM Director Client version 5.20 or 5.23, taking remote control and then within
the remote session I initiate a PC restart. This re-produces these errors
without fail.
I've also received this same error without Director but am
unable to cause this to re-occur consistently.
My Findings:
Changing the BIOS Settings from the default settings of :
BIOS Config > Display
Default Primary Video Device:[Internal]
Boot Display Device:[ThinPad LCD]
Graphics Device:[Discrete Graphics]
OS Detection for Switchable Graphics:[Enabled]
To the following settings resolves the issue though this
causes the installed and previously working ATI driver not to detect the video
device.
BIOS Config > Display
Default Primary Video Device:[Internal]
Boot Display Device:[ThinPad LCD]
Graphics Device:[Integrated Graphics]
OS Detection for Switchable Graphics:[Disabled]
What I have tried:
o Updated the BIOS and Drivers to Latest available
o Re-Installed the Display Driver, Downgraded the
Display Driver
o Removed the Display Driver and left BIOS
settings enabled (NMI errors re-occur)
To get to the above findings I tried removing /
re-installing pretty much every driver and disabling every option within the
BIOS. I am only listing what I believe is now relevant to the identified
problem. I can provide further information upon request.
Anyone able to help ?

Hello,
the switchable gfx doesn´t work in XP. In XP you have to choose gfx options in bios before booting os.
Please try:
Default Primary Video Device:[Internal]
Boot Display Device:[ThinPad LCD]
Graphics Device:[discrete Graphics]
OS Detection for Switchable Graphics:[Disabled]
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

CD Boot: memory overflow error! Trying to install Bootcamp / Windows 7 on MacBook Pro 2009 with external superdrive

Hi all,
I'm trying to install Bootcamp on my machine.
I was running Parallels before but need Bootcamp in order to run heavy software on the PC side (e.g. Rhino/Maxwell/etc).
I have a Macbook Pro 17" from around 2009, running Mountain Lion 10.7.3.
Problem is, my internal CD Drive is broken and doesn't read discs, so it couldn't read the Windows installation disc (Windows Home Premium 7 64 bit - OEM System Builder Pack).
So, I rang Apple to try to fix it and they said it would be cheaper and faster to buy an external SuperDrive.
I explained that I wanted it to install bootcamp and they said, fine.
However when I bought the SuperDrive, it turns out its only supposed to be working with new Macbook Pro with Retina display, and other machines that don't have internal cd drives.
At first it didnt work, but then I found a helpful website which enabled it to work on my machine.
So I went ahead and started installing Windows through the BootCamp Assistant.
It partitioned my hard drive - success!
But then it turned into black screen, with message saying "CDBOOT: Memory overfloor error"
Help please!!!
I suspect the problem is either:
a) Old Macbook Pro can't boot from the Windows disk
or
b) The Windows OEM version is somehow not designed to work with Mac. I bought it secondhand off a guy, thinking it was the full version, silly thing to do!
Your thoughts and help is seriously appreciated!
Tomorrow I'm going to the Apple Store and also to buy a brand new copy of Windows, I guess.

This has been resolved. It turned out that in spite of the message at the end of installation - "Windows could not complete the installation. To install Windows on this computer restart the installation" Windows was installed successfully but the problem was the Bootcamp drivers, it could not read them(install them) from my original OSX Istall DVD and I thought that that the whole package was not installed successfully. I will copy the intructions here as well since this thread may attract lots of other people with similar problem who may think it was not a good installation. Here you go:
Ok, after 3 sleepness nights I have found a solution and finally have a working Windows 7 Ultimate. I hope this will be helpful for everyone having similar issues and not have to go through the same nightmare.
Right away after logging in Windows for the first time insert the original Snow Leopard Install DVD and if Windows does not read it or install any drivers after clicking on setup.exe do the following:
Right-click on Start » Programs » Accessories » Command Prompt
Select Run as Administrator
Type cd /d D:, then press Enter
Type cd Boot Camp\Drivers\Apple, then press Enter
Type BootCamp64.msi, then press Enter
If you do not how to right click before installing the drivers the following:
Click on Start
Enter cmd in the search box
Instead of hitting the Enter key use Ctrl + Shift + Enter and will open a dialog box
Click Yes at the prompt and you will be running as an administrator.
If you do not have the original install DVD go the this link and follow the instructions(including the ones from the last comment):
<Edited by Host>

Just receive this email. There is no evidence that i have purchased anything. Dear client(e), Your ID, was just used to purchase "Wrecking ball.Mp3" by 'Miley Cyrus' from iTunes Store on a computer or device that has never been used by you before.

Just received this email. Havn't purchased anything any idea????
Dear client(e),
Your ID, was just used to purchase "Wrecking ball.Mp3" by 'Miley Cyrus' from iTunes Store on a computer or device that has never been used by you before.
This purchase was initiated from 'BRAZIL'
If you made this purchase you can ignore this email, but if it was made in error, or if you believe an unauthorized person accessed your account, please reset your account informations immediately by going to
ireset.appleaccount.com => Confirm that you're the account holder and then
change your password.
N.B: If you don't update your account, Please note that it can be
used to make more orders in our stores, and then we'll be obliged to block it.
Thanks,,
Regards,
Customer Support

It's a phishing attempt to get your account and payment details, it's not from Apple - if you clicked on the links in it and entered your details then you should change your password immediately e.g. by tapping on your id in Settings > iTunes & App Store on your iPad and selecting 'view apple id' on the popup and signing into it, via the Store > View Account menu option on your computer's iTunes or via http://appleid.apple.com
If you still have the email then you could forward it to Apple : [email protected]

PLEASE HELP!!! My 'Apple mobile device helper has stopped working'!

Today i bought the new 3G iPhone so i went online to download the new 7.7 iTunes software. Now when i go into my iTunes a Windows pop up appears telling me that my 'Apple mobile device helper has stopped working' and that it is diagnosing the problem. The thing is that it doesn't diagnose the problem, the same box just keeps popping up over and over again.
I am not very computer literate and have tried everything that i can think of but nothing has worked.
Please can someone help because i'm absolutely dying to use my new iPhone; i queued up from 6 am to get my hands on it! :0(

I'm just a simple user. I don't know how to fix it any more than any of the other posters with this problem. I've looked around in control panel, done some poking and prodding with services and processes, and can't find a reasonable way to stop the messages without completely hosing up iTunes. I know the messages are annoying as ****, and nobody likes the idea, but sitting around and doing nothing is sometimes a whole lot better then doing something that makes it worse. See if you can find a document from Apple that tells you how to go back to the previous version of iTunes. I've seen that course of action mentioned several times for previous releases of iTunes upgrades, so the instructions for it must exist in another forum.
I just think, from the number of posts, that Apple is going to have to get a fix out pretty quickly, because this error pretty much shuts down their products on the Windows platform. They can't afford to let it go on for very long.

"Mobile Device helper has stopped working" after installing most recent

OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
_*Steps I have taken :*_
I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
*The two messages that I continue to get when I open iTunes and connect my phone:*
1) "Mobile Device helper has stopped working"
2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
The most recent error message under "Problems Reports & Solutions" on my start menu read:
Product: MobileDeviceHelper
Problem: Stopped working
Date: 4/7/2010 3:42 PM
Status: Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
This is the same message that I have received the last 10 times under Mobile Device Helper.
*Please PLEASE please*, does anyone know how to resolve this problem?
*Thank you SO MUCH for any insight.*
-signed, UGH!!!

Hi,
I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
Really frustrating and disappointing.

Device memory has errors

Similar Messages

Maybe you are looking for