Device menu not showing on Iconia A500 tablet (with FB 4)

I have an Acer Iconia A500 tablet and am building an app using Flash Builder 4.5 on Windows.
The A500 doesn't have a physical button for the menu.  In my app, the virtual button for the menu does not appear, eventhough I have defined menu items, and it works for my other android devices.  Does anyone know where I might look to help figure out what to do?
thanks!
-jonathan

Its a Bug since Air 2.7 i think
https://bugbase.adobe.com/index.cfm?event=bug&id=2936827

Similar Messages

  • W520: Unable to boot from USB - device does not show up in boot menu

    I have a W520, and I am trying to boot from a USB key. The USB key is bootable, my old T61p boots just fine from it, and so does another computer I tried.
    The W520, after pressing F12 on power on, immediately shows the Intel PXE agent and then some blue boot menu, which only shows hard drive and LAN as available boot options.
    I have tried all three USB ports but the results are always the same - the USB device does not show up. Is there any trick or BIOS setting to enable boot from USB?
    Thanks,
        CS 

    Hello Neil
    Thanks for getting back to me
    The issue was that the usb drives were disabled in the bios from the  Startup menu.
    To enable
    1. Enter bios
    2. Select boot
    3. If you do not see the boot device you require use the down cursor key until the "Excluded from boot priority order" becomes visible.
    4. Select the device you require (in my case USB HDD)
    5. Save and exit.
    You can now boot from a usb stick and install the Linux distro of your choice :-)
    Cheers

  • HT1414 What if the device is not showing up in i-tunes when I try to restore?

    My i-phone 4 has gone dead and I can't restore it by hard re-set nor by going to i-tunes as the phone device is not showing up. Am i looking in the wrong place?

    In iTunes...  From the View menu > Select " Show Sidebar "
    http://osxdaily.com/2012/11/29/5-tips-make-itunes-look-normal/

  • I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    The TIme Machine volume does not have that checkbox.
    I think the issue is with your Finder...
    Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then, restart, or log out and in again.
    (You will have to reset a few finder prefs the way you like them.)

  • Site does not show correct on Samsung Tablet

    Hi all,
    I've seen a few questions regarding Muse sites not being displayed correct on a Samsung Tablet. My problem is similar but still different. The site is displaying correct on the desktop/ipad/iphone but not on the Samsung Tablet.
    In the previewt his is not shown. Now I also know that the preview more or less simulates how a site should look.
    This is the site: www.uwpersoonlijkeoptieadviseur.nl (a dutch site).
    I have looked at the links and they seem to be ok. I mean all the links link to the Tablet version.
    cheers,
    Larry

    Hi sanjit, the thing is that on a samsung tablet from around 3 years old the problem occurs. But on a samsung tablet almost a year /2years old the site displays correct.
    Both of them has got android 4.04
    See the image with the specs in which it loads correct.(white background)
    And here the specs of a older one (dark grey one And arround 3 years old)
    And this problem occurs:
    So on a newer tablet it shows correct.
    Verstuurd vanaf mijn iPhone
    Op 1 apr. 2014 om 17:22 heeft Sanjit_Das <[email protected]> het volgende geschreven:
    Re: Site does not show correct on Samsung Tablet
    created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
    Hi Larry
    Please let me know if there is any specific page element not showing up correctly on Tablet.
    Also which browser are you using , browser version would help. Do you see the same problem with any other browser on same tablet.
    The device details would also help.
    Thanks,
    Sanjit
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6261109#6261109
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6261109#6261109
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6261109#6261109. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Help with using Adobe Muse CC at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Yesterday I  reset my settings on my  iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

    Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

    Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
    If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
    Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

  • How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    Hi Celia51510,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    I can't tell from your post if you are using a Windows or a Mac Computer.
    Try deleting the iTunes application and redownloading the version you need below:
    iTunes 11.1 Download for Mac
    http://support.apple.com/kb/DL1614
    iTunes 11.1 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Cheers,
    - Judy

  • Some Devices are not showing up at all in the Discovery reports

    Hi all,
    The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
    My question is:
    Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
    Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
    Your kindly respond is highly appreciated.
    Thanks in advance.

    I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
    1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
    ERROR  [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice]  : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
    ERROR  [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice]  : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
    ERROR  [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice]  : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
    2. in the CSDiscovery.log:
    Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
    I checked the file and the casusers has a Modify permission
    My Question is:
    1. what is the meaning of those output exactly?
    2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
    Many thanks for your help.

  • I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts

    I can't synch my iPhone with iTunes because the device does not show up in a device window when I plug it in...it's missing in action and thus I'm not able to add any content from the iTunes to my iPhone, e.g. podcasts.   All the instructions on synching start with "find your device in the device window".  But what if you have no device window?

    Missing "message" from above: The iPad "DGMTR" is synced with another iTunes library on DGMTR's MacBook Pro. Do you want to erase this iPad and sync with this iTunes library? An iPad can be synched with only one iTunes library at a time. Erasing and syncing replaces the contents of this iTunes library.
    I thought the libraries were the same.

  • My devices are not showing up on my itunes. How do i fix this?

    My devices are not showing up on my itunes to sync. how do i fix this?

    Why is this answer being accepted by users?  Am I supposed to restart my Mac EVERY TIME I want to sync my iPhone, iPad or iPod?
    Has anyone found a solution to this problem?  I see this question in the Apple Support forums quite frequently, and the answer always boils down to 'http://support.apple.com/kb/TS1591' - Which - after exhausting the obvious, you've got a bad cable or bad USB port checklist - recommends that you 'Restart your Mac' to resolve the issue.
    That's not an adequate or acceptable answer - If Apple is ignoring this question, then they're the ones with a 'Problem' - Ignoring these obvious issues (this isn't a bad cable / bad USB port problem) is only going to lead to a loss of customers.  I'm certain that Apple has the technical expertise to investigate and resolve the underlying issue. The real question is 'does Apple still value the customer'?
    My iTunes (11.1.4) has stopped recognizing Devices (an iPad 2, an iPhone 5S, an iPod classic). This has been going on for about a month now (since 11.1.4?). Yes, I have the current OS (OS 10.9.1), yes my iDevice has the most recent iOS (just updated to 7.0.6 (1.1.2 for 160GB iPod Classic), yes my USB 3.0 ports work (after I reboot the computer). The syncing and connectivity works fine (with all my devices/cables/USB ports) until I disconnect my device - What good is my mobile device if I have to leave it tethered to my Mac in order to use it?

  • TS1424 Apple Mobile device does not show up after installing 10.0.7.21

    Receive message "Apple Device not started". Apple Device does not show up in Adminstrative Tools, Services. Windows 7 64bit, IOS6.0.1.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Mobile Device Support won't install normally.
    tt2

  • My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

    ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • I have just updated iTunes on my laptop, and now when i plug my iPhone in, the device does not show up in iTunes. I have tried multiple wires and uninstalling and re-installing iTunes. What do i do?

    I've just updated my iTunes on my laptop
    And when i plug my iPhone in, nothing happens and the device does not show up in iTunes
    I have tried numerous cables, uninstalling and re-installing iTunes and searching for devices on iTunes
    And i still have no luck
    help!

    Pick the appropriate one of these for advice:
    Windows - http://support.apple.com/kb/ts1538
    Mac - http://support.apple.com/kb/ts1591

  • Devices are not showing up in Finder sidebar

    All of a sudden attached devices are not showing up in the sidebar in finder nor on the desktop, have already checked Finder prefs and are all set correctly.
    Cant access files on attached hard drive and cant dismount. Upon pulling the plug I get the warning about not ejecting the device first.

    Try relaunching the Finder ...
    Hold down Option key and right click on Finder’s Dock icon, then select “Relaunch”.

  • HT201412 My iphone stopped working, and and conneted to itunes but my device does not show in itunes also....please help

    After upgrade to ios 6, iphone 4 is not wroking, It suddenly stops responding to any actions. Today it totally stopped and is nothing working. Connected to itunes and the device does not shows up. Please help

    Please turn off your caps lock.
    All caps indicates shouting, is considered rude and is difficult to read.  Many will not read such posts.
    If you are unable to restore your iphone then try this:
    iOS: Unable to update or restore

Maybe you are looking for

  • Linksys E4200: How to access USB hard drive remotely from Android phone or computer

    Hello. I just purchased a Linksys e4200 router today along with a WD 2TB MyBook hard drive. My intent is to set these two up together so that i can share files on the hard drive with: Computers on my home network ( 1 Windows 7 desktop wired, 1 window

  • Procedure Data Export and Import from One server to another server

    Dear all, I want to transfer my all Production Server data into Quality Server or Development Server. So how can i transfer my all data in this and please tell me procedure for transfer data into different server. and also tell me which server u pref

  • Local SRM PO intead of Extended Classic

    Hello, Does anyone have any idea how best to resolve the following problem. We are using SRM 5.0. We have managed to create a Local SRM PO instead of the Extended Classic scenario and so the PO will not transfer to R/3 (where the invoices are entered

  • How can i two adobe digital edition windows?

    Is it possible to open two docs at the same time - strictly one document in two different windows ? I have to campare two parts of one document and it would be much easier if i can do it using two windows on my two monitors. Please help!

  • Iphoto issuses

    when I try to view my photos in full screen mode it goes black or just back to thumbnails