Device name already exists changed to

A couple of months back I upgraded my SLES 10sp1 servers to SLES 10sp2 using ZLM. My ZLM server is running SLES 11 and version 7.3 of ZLM. My SLES 10sp2 servers are running the ZLM 7.3 client. When I look in ZCC under the Hot List it shows my main ZLM 7.3 SLES 11 server with a warning status for almost all my hosts. When I click on that to see what is going on the Event log states: Device name already existed, changed to MYSLES10HOSTNAME while attempting to register host: MYSLES10HOSTNAME I clear all these events and later on they are back. Sometimes the same ones sometimes others. I currently maintain about 200 servers using ZLM and the Event log has 44 devices with this message. What setting do I need to change or delete? Or better yet what do I need to do to correct this behavior?
Thanks!

This happens normally when you register one host against the zlm server, stop zmd, delete the deviceid and secret file, start zmd and register it again against the zlm server without deleting the existing device in the zlm web interface.
What happens at this time is that the zlm client registers with the deviceid and the secret against the zlm server. In the web interface you see the hostname of it. If you open the details, you see the guid of the host which equals the deviceid.
When the zlm client communicates with the zlm server it uses the deviceid and the secret to login and query the bundles, catalogs and policies assigned to it.
So now when the zlm client is stopped, the files deleted, the zlm recreates them the next time it is started. After registering against the zlm server, it tries to login with the new deviceid and the new secret. There is already such a host entry, therefor it renames one and register with the new values again.
Do you have maybe a cron job or something that deletes those files and restarts the zlm client ?
Rainer

Similar Messages

How can i change the settings so that before download the firefox gives a propmt that same file name already exists, instead of automatically renaming duplicate files by adding .1 suffix?

When I download a file, if a file of similar name already exists in the same download folder, the firefox downloads the file and renames it by adding numeric .1 to the file name.
I want the firebox to give me a prompt that similar file already exist, rather than automatically renaming it by adding suffix .1.

Downloads Options
* https://support.mozilla.com/en-US/kb/Options%20window%20-%20General%20panel#w_downloads
Unable to Download or Save files
* https://support.mozilla.com/en-US/kb/Unable%20to%20download%20or%20save%20files
Check and tell if its working.

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Home network name already exists in Home Hub's dat...

Hello,
How do I delete this database as it's causing so much trouble/problems by assigning multiple names to same static IP address. How do I connect to the database and delete all the record or create new static address assignment. Each time i tried to rename it back, i keep getting the error "Home network name already exists in Home Hub's database." Remote desktop is now connecting to different machine due to this issue
Thanks

Hi,
Thanks for your reply. I have some computers with static IP physically assigned to them (not via home hub but on physically on the computer itself), when I go to Hub manager, advanced settings and home network, the device name with static IP are mapped to wrong IP, if i click on the name and change it, I then get errorr about the database. I am not talking about or refering to DHCP/DHCP table. My problem is with static IP I physically assigned to some devices but coming up on Home Network with a diffrent name mapped to assigned IP on those computer. Really I should be able to change the name to the right one and click on save.
I have some server with static IP and when I RDP (using netbios name) into them, they're connecting to wrong system, checking the hub gave me visibility that those system are mapped to those IP of connected system
Example:
System A - IP 10.10.10.10 (physically assigned on the machine)
System B - IP 10.10.10.11 (Physically assigned on the machine)
RDP to System A, you get system B desktop, checked Home HUB, system A is mapped to system B IP (not sure if I'm making sense here)
Please forget about DHCP, those are all fine and not really worry about those one
My question is: How do I clear Home Hub database as described in the error, is this possible

SPD 2010 - How to know if a file with a given name already exists in a document library

Hi,
I've created a workflow using SPD. One of the steps in there is changing the name of the document to a clean name. This workflow fails if a document with this same name already exists in my document library. Is there a way to check in a SPD workflow if
a document with a given name already exists in my document library ?
Marc Nemegeer

Hi,
According to your post, my understanding is that you wanted to know if a file with a given name already exists in a document library.
You can use a SharePoint Designer workflow to achive it.
To test to see if a document exists, you need to use condition:
If Current List:Name equals [%Current Item:Title%].docx
Here is a similar thread for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/cc227020-ce81-4c08-aee0-a66789d8ad05/test-to-see-if-document-exists?forum=sharepointcustomizationprev
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Problem "archive name already exists" Outlook 2007

Dear All,
I’m writing to you because I really need help with solving the problem with my MS Outlook 2007 with SP3.
I’m using windows 7 64 bit. I’m using Exchange account.
The problem is when my mailbox on exchange is almost full so I’m making manual autoarchive.
From a few months I have problem with that matter because I have information “archive name already exists”.
I can see the exact path to the archive folder.
I can't create archive with the same name for example archive.pst, all the time during new archivisation I have to change the name of the archive file like: archive1, archive2, archive3….. Now in my mailbox I have something like
5 archivisation folders :(
Can You help me please with that?
Thank You in advance!

I recommend that you post this in the Outlook Forum: http://social.technet.microsoft.com/Forums/en-US/outlook/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

File Error: A file of this name already exists

im using Final Cut Pro 5.1.4 and whenever I tried to export a sequence using compressor, I get that error message "File Error: A file of this name already exists". I tried reinstalling the program, nothing. What can I do to fix that?

Sounds like you already have a file by that name located in the place you want to export to. Try changing the name of your new file.
b

Workspace name already exists

I created a workspace called DEVELOPMENT using HTLM DB's ADMIN user. At a later date the DEVELOPMENT workspace was deleted. I now want to recreate the workspace with the same name and get an "workspace name already exists" error. Using the Manage Workspaces option there is no entry for DEVELOPMENT. So my query is how come I get the error when there is no longer any record of the original workspace?
Many thanks for any assistance,
Ian

Ian,
The service maintains a list of workspace provisioning requests, by workspace name. Even after a service (workspace) has been terminated or deleted, the request is still in a table. Try to view all requests (using a status LOV) on one of those service request or change request admin pages. You can adjust the status of a request and there's also a way to remove the request. After it's removed you should be able to create a workspace with the old name.
If you can't find the right page to do this, let us know and I'll get you the exact navigation steps to it.
Scott

Project Server 2010 and Report Builder 3 : the same name already exists

Hi,
I created my first report in Report Builder, and,
although it's not perfect, I tried to save it. But I get the error :
Impossible to save the report "No title.rdl". A file from another type with the same name already exists".
I tried to change the name 5 times but I always got the same error.
Any idea ?
Thanks

Hi WLID,
I have taken a sample test in my environment, it works well. If there is already another type file named “No title” on report server, then it can be saved on report server. If there is already a report named “No title” on report server, then it would prompt
that “An item named ‘http://servername/reportserver/foldername/No title’ already existed. Do you want to replace the existing item?” when we want to save the report in the same folder.
What’s the location that you want to save the report? Is it a report server or others? Could you please provide us more information about the issue? You can try to reopen the Report Builder, then create another simple report to text the issue again.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

"91590.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How do I fix this?

The delete button in Mail gives me this message: “91590.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. The only thin that has changed is an OS update last evening. (Mountain Lion)

Thanks...it was spooky seeing the mail in my box suddenly disappear and blank after going to Mailbox and Rebuild. But "poof" it was up again and was able to delete without the messages telling me it had a duplicate in trash (which it did). Solved the problem.

Operation can't be completed because an item of same name already exists - Mavericks

I am trying to copy a large file folder (of a large iTunes library of music files) from a WD Live NAS drive to a new AirPlay Time Capsule via Finder on my Retina MBP. Every time I try it, I get the same error "operation can't be completed because an item of the same name already exists."
I have tried a number of the following solutions:
1. I cleared my cache out as in this thread:
https://discussions.apple.com/thread/2231287?start=120&tstart=0
2. I tried using the Terminal app, as in this thread:
https://discussions.apple.com/message/21786245#21786245
3. I tried closing both Finder windows once I started the copy operation, as in this thread:
https://discussions.apple.com/thread/2231287?start=105&tstart=0
4. I tried deleting/renaming all files that contained a ~ as in a thread I can't find right now.
All of these things are not working. I was able to copy several other large file folders (mostly of videos) without a hitch. I can't figure it out. Can anyone assist?
Many thanks...

subcrapper wrote:
"have you tried using Disk Utility to erase 1TB HHD and reformat before trying to copy the data back?"
Yes, I had to format the 1TB to FAT before I use it.
whoa there. why did you format the drive FAT? that's an obsolete windows drive format and OS X is known to have various issues with it. this may easily account for your problems. strongly suggest you reformat the drive mac os extended.
"have you tried using the restore option within Disk Utility to copy the data back instead of doing it manually?"
There's nothing on the 1TB to restore because I sent it in for warranty exchange. So its brand new, nothing in it.
he was suggesting that you use the restore tab in disk utility to copy the 640GB drive to the new 1TB one. that's what I suggested too but I mentioned using superduper or CCCloner.
but you really should reformat the drive first. the only reason to use FAT is if you want to use the drive from both mac and windows. but then you'll likely have to live with the quirks of FAT and OS X.

Operation can't be completed because an item of same name already exist

Hi, my first post. I've search the net for similar problems but nothing exact.
I have a Maxtor OneTouch 4 (1TB)that just returned cos I got it exchanged. While it was being exchanged, I used a Maxtor OneTouch (640GB). I had transferred everything from my 1TB to the 640GB.
Now that the 1TB's back, I want to transfer everything back. But when I try to transfer anything from the 640GB to the 1TB, an error message appears saying "operation can't be completed because an item "(of same name)" already exist."
After I click OK on the error message, only the folder gets copied over to the 1TB but NONE of its contents.
This only happens when I transfer folders. If I were to transfer individual files, e.g a picture, it's successful.
Things that do work:
- transferring files and folders from computer to both HDDs
- transferring files and folders from either HDDs to computer
So the only problem is transfers between both HDDs.
I read some thread that repairing permissions might help but when I enter Disk Utility, "Verify Disk permissions" or "Repair Disk Permissions" are both greyed out.
Does anybody have experience with this problem? Please help, the 640GB is exploding!
Thanks in advance!

subcrapper wrote:
"have you tried using Disk Utility to erase 1TB HHD and reformat before trying to copy the data back?"
Yes, I had to format the 1TB to FAT before I use it.
whoa there. why did you format the drive FAT? that's an obsolete windows drive format and OS X is known to have various issues with it. this may easily account for your problems. strongly suggest you reformat the drive mac os extended.
"have you tried using the restore option within Disk Utility to copy the data back instead of doing it manually?"
There's nothing on the 1TB to restore because I sent it in for warranty exchange. So its brand new, nothing in it.
he was suggesting that you use the restore tab in disk utility to copy the 640GB drive to the new 1TB one. that's what I suggested too but I mentioned using superduper or CCCloner.
but you really should reformat the drive first. the only reason to use FAT is if you want to use the drive from both mac and windows. but then you'll likely have to live with the quirks of FAT and OS X.

File name replaced with Tilde (~), name already exists error

When exporting jpg files in Lightroom 4 I've recently had an issue with some of the files containing a tilde (~), the 43rd file in the series often gets it as well as a few others. So in the series one might be named 43-MA~1.jpg instead of the 43-Maegan-details.jpg that I originally named the file.
When I've tried to rename these files from the finder I get the error "name already exists". If I rename it to something totally different it works but if I then try to rename it the original filename I wanted it gives me the error again or reverts to the name with the ~.
I'm running 10.6.8, and the problem has been happening the past few weeks but I've never had the problem before. I can't figure out what is causing the problem and it's not every export but it's a huge hassle to try and rename the files.

This is the one error message that I have gotten in years with Encore. In my case, I had created a Project to be used as a "template," and had done the layout, Imported the common Assets, and then used this as the basis for a 17 DVD set, just Importing the unique Assets to each. Everything went perfectly, until disc 15. Maybe I was sloppy, as I had just completed 14 such Projects that day, but when I went to Build, I got that error. I tried un-Linking and re-Linking Assets, and checked all Menus. Nothing - just that error. Flushed Media Cache, and only the error. I posted here, with the details and asking for ideas.
In the meantime, I just grabbed my "template" Project and Imported those same, unique Assets. Used my altered Menus from bad Project and did my linking, exactly (or so I thought) as I had just done. This time, the Build was successful and # 15 thru 17 went without a hitch.
I had Saved that bad Project, and several folk offered suggestions. I tried them all, but never could get it to Build. I always got that error. I finally gave up testing and chalked it up to OE on my part, but I never figured out what I had done wrong, as I really thought that it was by the numbers.
Based on my experience, I would just start a new Project, being careful in the workflow. That was the only thing that worked for me.
Good luck,
Hunt

Copying a PageItem to Another Document, When the Color Name Already Exists in the Target Document

(CS5 and ActionScript)
I am trying to copy a PageItem from Document A to Document B.
If the PageItem in Document A has a Color named "MyColor", and that Color already exists in Document B, then when I duplicate the PageItem from Document A to B, a new Color called "MyColor 2" is created in Document B.
What I wanted was for the PageItem to simply take on the deifintion of "MyColor" which was already in Document A.
If you perform this activity manually in the desktop UI, no duplicate color is created and the PageItem recieves de facto the original color values for the original "MyColor" in target document B.
Any ideas?
mlavie

Sorry - mistake crept in. I meant:
I am trying to copy a PageItem from Document A to Document B.
If the PageItem in Document A has a Color named "MyColor", and a Color by that name already exists in Document B, then when I duplicate the PageItem from Document A to B, a new Color called "MyColor 2" is created in Document B.
What I wanted was for the PageItem to simply take on the deifintion of "MyColor" which was already defined in Document B.
If you perform this activity manually in the desktop UI, no duplicate color is created and the PageItem recieves de facto the original color values for the original "MyColor" in target document B.

Folder name already exists error when activating feature

HI,
I am creating a document library and adding folders to it using elements.xml in VS 2012.
First time deployment of the item works fine, the folder is created. But further deployment or activation of feature from site features is throwing the error "Folder name already exists".
Below is the elements.xml of List Instance, which was modified to add the folders.
<ListInstance Title="TestLibrary" OnQuickLaunch="FALSE" TemplateType="101" FeatureId="Guid" Url="Lists/TestLibrary" Description="TEST Library List Instance">
<Data>
<Rows>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_One</Field>
<Field Name="Title">Test_One</Field>
<Field Name="FSObjType">1</Field>
</Row>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_Two</Field>
<Field Name="Title">Test_Two</Field>
<Field Name="FSObjType">1</Field>
</Row>
</Rows>
</Data>
</ListInstance>
How to fix this?
Thanks

Hi,
According to your post, my understanding is that you got “Folder name already exists error when activating feature”.
I had used the following code snippet to create a folder within a document library, it didn’t throw errors when reactive the feature.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="LibTest"
OnQuickLaunch="TRUE"
TemplateType="10000"
Url="Lists/LibTest"
Description="My Lib Instance">
</ListInstance>
<Module Url="Lists/LibTest/Folder1" />
</Elements>
http://shareden.blogspot.com/2012/11/creating-feature-with-image-library.html
Also, when you redeploy the project, it will give you a dialog which would promote to delete the existed list or not.
If you click the “Resove Automatically”, the visual studio would delete the existed list automatically, and create a new list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Device name already exists changed to

Similar Messages

Maybe you are looking for