Device Name for Cisco Jabber

I found a document on Jabber Developer that explains all steps for the Cisco Jabber CUCM Setup Guide (http://developer.cisco.com/web/jabber-developer/jabber-sdk-cucm-guide), the phone type must be Cisco Unified Client Services Framework, everything fine, but says that the Device Name should be as ECP<username> when original setup guides says that must be as CSF<username>.
My users setup Device Name are as CSF<username>, but just to follow a best practice, should I change all Device Names to ECP<username>??
Regards,
Juan Carlos Arias

There's another thread on which someone mentioned some problems when using ECP for device name. Windows for jabber method of operation is the name of it. Do you have any configs using ECP??
Since I already have this in m lab working as expected i'll configure a couple of users with ECP and see if something changes, just wondering if you have something configured with ECP already.
Sent from Cisco Technical Support iPad App

Similar Messages

  • Contacts search for cisco Jabber for Windows & MAC

    Hello,
    Please assist on given below query !!
    System Deatails of CUCM & IM Presence Server
    CUCM:
    1>  System version: 9.1.1.20000-5
    2>  VMware Installation: 2 vCPU Intel(R) Xeon(R) CPU X5650 @  2.67GHz, disk 1: 80Gbytes, 4096Mbytes RAM
    3> Physical Server UCS210 M2
    4>  Already Integrated with IM & Presence
    IM & Presence:
    1>  System version: 9.1.1.20000-5
    2>  VMware Installation: 1 vCPU Intel(R) Xeon(R) CPU X5650 @  2.67GHz, disk 1: 80Gbytes, 2048Mbytes RAM
    3> Physical Server UCS210 M2
    4>  Already Integrated with CUCM
    Requirement:
    1>  User Search base for Cisco Jabber for Windows & MAC Client
    2>  Will we able to get contacts list(Jabber For windows & MAC) as like "Lotus Sametimes" for all users?
    Every reply would highly Appreciated!!

    Hi Karthik,
    Thanks for your reply!
    I have gone through the link but query is different actually, please assist on below query and provide any document links if possible.
    1>  The contacts does not appear when I perform a search
    2>  Do I required to integrate LDAP for same? If Yes Then Do I need to perform integration with CUCM Or IM & Presence? Or Only CUCM? Or only IM & Presence? (Please post a link to perform same)
    3>  Please also provide If any specific system requirement for LDAP server.
    4>  Is it possible without LDAP integration?
    It is really urgent and every post would highly appreciate..........

  • How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

    How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

    Hi littlemansa,
    If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
    How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
    http://support.apple.com/en-us/HT4137
    Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results. 
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Softphone feature for Cisco Jabber Client

    Hello everyone,
    I have a CUCM cluster v.8.6.2 and a CUPS v.8.6.4. I've installed my full CUWL licenses as well as my CUP Licenses AND the Jabber for Everyone COP file. I've managed to install Jabber on Mac and on Windows and have all the features such as Chat, Desktop phone integration and Visual Voicemail with Cisco Unity Connection working as well. The only feature I'm having a huge hassle getting to work is the Softphone feature. I've tried adding a CUPC device with the user (btw everything is integrated and uses LDAP for authentication) as the digest account for it as well as the Owner ID. I've tried adding a CSF device as well (I remember reading it somewhere) but the Jabber client never discovers a Softphone device and all of the options on the client are grayed out for me to put in the device settings. I thought I saw it once looking for a device name CSFACILLI (ACILLI being my username) in the System Diagnostics for the Jabber for Mac client but now it just shows:
       Soft Phone Server
    Server Address:           cucm02.mycompany.net
    Server Port:                     2748
    Server Protocol:           --
    Device:                               --
    Line ID:                               --
    Status:                               Disconnected
    Any help or thoughts on this would be greatly appreciated! Thanks!
    Tony

    Aaron,
    Here's the bit I found interesting from the reporting function:
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::downloadConfig -- begin:
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::getCnfFile -- begin: , strDeviceName.c_str()=CSFacill, bHttp=FALSE
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CTFTPClient::Get -- begin: , remotefile=CTLFile.tlv, host=cucm02.mycompany.net, bIsAsyMode=TRUE, port=69
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -  TFTP_Error Select error
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -  TFTP_Error Can't get packet, retrycount=3
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -   CTFTPClient::ContinueGet -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CTFTPClient::Get -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xb038d000] -  CTFTPClient::ReceiveData -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::getCnfFile -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CCUCMClient::downloadConfig -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xacab02c0] -  CPhone::setPhoneMode -- end!
    -- 2012-07-25 08:31:01.000 DEBUG [0xb030b000] -  CTFTPClient::ReceiveData -- begin: , nCookie=5, bIsAsyMode=TRUE
    It looks like it's trying to get CTLFile.tlv from my TFTP servers (which are my subscribers). I went under TFTP File Management under OS Administration on the Subscribers and no such file exists. Is this something I have to download from Cisco? It does look like it's trying for the correct device, just can't get the Configuration File it needs... Your thoughts?
    Thanks,
    Tony

  • A list of supported Android Phones for Cisco Jabber Client.

    Hi there,
    I opened a discussion before about the Cisco Jabber Client for Android phones.
    This product from Cisco is only official support bij a several mobile Android telephones. (very poor)
    As everyone knows is that the mobile market is continious in development. Since a half year the official support phone list is still the same, but a lot of new Adroid phones are now on the market.
    It's even so worse that some of the Cisco supported phones, are not available anymore in the market.
    - Samsung Galaxy S2 becomes a Samsung Galaxy S3
    - Samsung Galaxy TAB is still there
    - Samsung Galaxy S (are not available anymore) The S1 or S Plus are now becoming the Samsung Galaxy S Advanced.
    At what are the alternatives?
    Still the list on the documentation is out-dated.
    See:
    Samsung Galaxy S International (GT-I9000) with Android operating system (OS) Version 2.2.1 or 2.3
    Samsung Galaxy Tab International (GT-P1000) with Android 2.2.1 or 2.3
    Samsung Galaxy S II (AT&T) with Android 2.3
    To use Cisco Jabber for Android on the Samsung Galaxy S device, it is important that you upgrade your handset OS to Android Version 2.2.1 or 2.3. See the manufacturer/carrier site for more information about how to update the OS on your device. Minor voice quality issues may be experienced depending on the device used.
    So hopefully Cisco is still working on the Cisco Jabber solution, and a lot of mobile Android phones will be supported so the road to success will be open.
    Hopefully someone can help me to list of tested and supported phones (Official bij Cisco)
    Kind regards,
    Edgar

    The official list of tested Android phones is what you've already discovered.  With the next release of Cisco Jabber for Android, I'm sure it will be updated.
    While the official list of what we tested is short, the client will work on many Android devices and TAC will provide support if you run into technical issues; provided the issue is with the Cisco Jabber client itself, and not with the OS of the manufacturer.
    If there is a specific Android phone you are looking to have officially tested by Cisco, PM me with that information and I'll work with you to see what we can do to get it added.

  • Defined Groups for Cisco Jabber Group Chat

    I dont think it is possible based upon this document but wondering if anyone knew any secrets out there. Is it possible to create predefined groups in Jabber for Windows preferably as defined in Active Directory or on the client side? We want to have chat groups automatically created for Sales, Engineering, etc. so users dont have to add other chat recipients users manually and can reach any engineering team member without knowing who is actually part of the engineering team for example.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9/JABW_BK_C56E95B6_00_feature-guide.html

    Hi,
    Jabber for Windows 9.7 supports Persistent Chat end user participation.
    Our next Release, 10.5 will add Room Administration and Moderator features, including room creation.
    Persistent Chat Rooms
    Users in your organization can use persistent chat rooms to share ideas and information in a chat room. The chat rooms look like group chats, except that the chat rooms stay active even after participants leave the room. When participants come back to the room, they can scroll back to read the messages that they missed.
    Participants can manage their chat rooms by browsing the existing rooms and joining open rooms, or being added to a room by an administrator. When they are in the chat rooms, participants can create mentions for other users, which notifies the mentioned user if they are a member of the room. They can also search chat rooms for particular keywords or senders by creating filters.
    Administrator tasks include creating, configuring, and deleting chat rooms, and adding or removing users from chat rooms. In this release, chat room administration and moderation must be performed with a client that supports persistent chat room administration. Cisco Jabber for Windows will provide administrative capabilities in a future release.
    Cisco Unified Communications Manager IM and Presence Version 10 is a software prerequisite for persistent chat rooms.
    For end user information about persistent chat rooms, see the chapter on Chats in the Advanced Feature Guide.
    For administrator information about enabling persistent chat rooms, see the Installation and Configuration Guide and the Server Setup Guide.
    Link for the same:
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/JABW_BK_CF8F083D_00_cisco-jabber-for-windows-97/JABW_BK_CF8F083D_00_cisco-jabber-for-windows-97_chapter_00.html
    Regards,
    Swathi

  • Android tablets supported for Cisco Jabber for Android 10.5 ?

    Exist a list with tablets support for this realease ?
    In release notes only include smartphones.
    Anoher question, is about version android client, in google play exits a old version, but not 10.5, any reason for this ?
    Thanks in advance.

    The tab listed for support is " Google Nexus 10 (Android OS 4.4.x) ". Please refer to the following link for more information;
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_011.html#CJAB_RF_D3CF90B1_00
    Quoting the following link; https://play.google.com/store/apps/details?id=com.cisco.im&hl=en ;we have got the J4A 10.5 listed on the playstore.
    - please rate if this helps.

  • Requirements for Cisco Jabber Applications

    Hi,
         I have to setup a lab enviornment for demonstrationg the Jabber technologies for our client.i am really new to jabber technologies and as per my understanding its a Softphone that we can install in PC and Mobile and has the features such as  IM,Presence and Web-ex.
    For my demonstration I am looking to Install the softphone in a windows PC.
    My doubt is what all software combination required for Jabber technologies??
    1)Either CUCM+Presence+Jabber(What Versons??)
    2)CUCM+Jabber.(Versions??)
    We have 3 MCS in our lab and running CUCM version 7.0.If we need a later version for this to support ??
    I serached in google for good document but no luck.....Please give me a good documents for integeration and configuration for this requiremnets.
    Thanks in advance.
    Nithin louis.

    Hi Nitin,
                 May be you can follow these links to get started:
    https://supportforums.cisco.com/docs/DOC-23292
    http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_00.html
    http://www.cisco.com/en/US/partner/docs/voice_ip_comm/jabber/Android/8_6/b_Cisco_Mobile_for_Android.html
    http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_01.html#CJAB_TK_D698EA8E_00
    http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/Android/8_6/JABA_BK_A940B90D_00_jabber-for-android-admin-guide_chapter_010.pdf
    Hope this helps.
    Please rate helpful posts!!!
    regards,
    Abdul

  • Cisco Jabber for Windows Client SDK

    Is there an SDK for Cisco Jabber for Windows client? I could only find the Web SDK. Are there no other SDKs that would let me control features of the Jabber Windows Client?

    And in order to avoid TAPI limitation, they say they have started using Jabber which controls all phone functionalities through an Application User connected to the Call Manager.
    Assuming they are referring to the normal Jabber for Windows/Mac/iOS/Android applications then this is wrong. Jabber - the client, not the IM&P servers which are part of the CUCM cluster (if you're familiar with Lync consider CUCM+IM&P servers a Front End Pool) - do not use an Application User at all. When a user starts Jabber, assuming SAML SSO is off, they supply an email address. This is used to find the servers via DNS SRV records, or the Mobile and Remote Access Expressway (roughly analogous to a Lync Edge pool) to tunnel through the firewall. After the email address they are prompted for their End User username and password. This is then used to access several APIs on the server, namely the User Data Service to discover what the user has. This would include what the user has configured/available to them. After this is done the Jabber client does one of three things with respect to phone functionality:
    If the user has no phone devices provisioned for them - physical or software - it becomes an IM&P client only.
    If the user has a software phone phone provisioned, it registers as that using SIP. In this way Jabber is the actual phone. This is called a CSF device for Jabber Windows/OS X.
    If the user has a desk phone assigned to their End User account AND administrative policy is to default to desk phone control, it registers to CTI Manager on the CUCM server to control the user's physical phone.
    A user can toggle between option two and three, if appropriately provisioned, but cannot have both simultaneously. In other words, Jabber is either controlling a physical phone over CTI or is a phone itself using SIP. The difference is where the audio/video media is sent from/to.
    All of this happens using that human's End User credentials.
    Now, if you wanted to have a server control the user's phone - either a physical one or Jabber - you would use the TSP as an interface to CTI Manager on the CUCM server and receive real-time events (e.g. the user went off-hook, the phone is ringing with this caller ID, etc.) and issue commands to that phone (e.g. make a call to X). This is done using an Application User account because the server would need to do this for multiple users simultaneously. If you also use the Super Provider concept, the CUCM administrator doesn't have to take the extra step of associating every phone to your Application User manually. Instead, you can simply issue CTI subscriptions to see any/all device activity you want.
    This is all assuming you wanted to do the integration server-side to avoid having to update the Cisco TSP application on every user PC (which also limits your WPF application to machines capable of running the TSP) every time the CUCM administrator patches the servers. If you don't care about that, then you can do this all client-side on the user's PC, and have them supply their End User credentials.
    Of course, you could also reconsider the Jabber SDK and just embed the make/receive call functionality directly into your application instead.

  • Directory Caching issue with Cisco Jabber client for Windows

    Hi ,
    I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
    Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
    Is there any automated way to remove the cache file? 
    Here is the detail of CUCM,Presence and Jabber.
    CUCM version: 9.1.x
    Presence          : 9.1.X
    Jabber              : 10.5 and 10.6

    Hello
    On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
    Network Device Enrollment Service.
    Our certificate for the CUPS were generated on this Certification Authority too.
    I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
    Enterprise Trust store for the users.
    But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
    I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
    Our partner left us alone with that unfortunately.
    Florent
    EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

  • Cisco Jabber for Windows 9.2.6 (setting registry keys)

    All,
    I would like to be able to set the general option for Cisco Jabber to force the client to, "Start Ciso Jabber when my computer starts" option.  Is this a registry setting I can force?  I'd also like to force calendar intergration with Microsoft Outlook by default as well.  We are using SCCM to push Jabber via RAP.  Are these registry settings HKCU or HKLM?  Thanks Phillip                    

    Hi Phillip,
    you may find more details on Installation and Configuration guide how to set Start_Client_On_Start_OS parameter in jabberConfig file.
    Keep in mind that values set in JabberlocalConfig.xml have presedence over value set in jabberConfig.xml file from TFTP server.
    Regards,
    Nebojsa

  • Unable to select 'Use Phone for audio calls' on Cisco Jabber Client 9.6 for Windows

    Hi,
    I have recently deployed Cisco Presence Server and integrated with Call Manager 9.1.2. I have successfully deplyed 6700 users on IM & Presence. Some of the users requested for Cisco Jabber with phone control.
    I have added CFS client on the Call Manager and associated it with the same extension numbers from their desk phones. I am currently able to make audio and video calls for these specific users. I am currently using Cisco Jabber Client 9.6 for windows. I have users both daisy chained to their desk phones and who are not. Can you please confirm if it does make any difference.
    Problem Faced -
    I am not able to use to option use phone for audio calls. The phone comes down with a cross sign on it. At the same time Cisco Jabber by default uses the client and it works as expected.
    Can you please let me know if any of you guys have faced a similar issue.
    Please let me know if you need any information regading the configuration used.
    Looking forward for your valuable comments.
    Thank you.
    Regards,
    Joseph Chirayath.

    Hi Will,
    I am attaching the screen shot for the END USER on CUCM 9.X that has been configured on Cisco Jabber.
    Please do let me know if you need any further information.
    Thank you.

  • Cisco Jabber Softphone not working

    Hi
    The softphone is not working for cisco jabber windows
    Attached is the logs
    CUCM AND CUPS version 9.x
    I found the below but is not clear to me what is the issue
    2013-10-10 12:53:42,577 DEBUG [0x00001360] [tionplugin\StatusBarPhoneButton.cpp(127)] [plugin-runtime] [OnCanSelectDeskphone] - enabling deskphone menu items
    2013-10-10 12:53:42,577 DEBUG [0x000011a8] [src\config\TftpHelper.cpp(114)] [csf.ecc] [ecc::TftpHelper::doRetrieveFile] - Received error: eFileNotFound downloading file using HTTP from 'http://10.255.0.11:6970/CTLSEPCSFKIKACHRISTOU.tlv', not trying TFTP following an explicit HTTP "not found" error.

    Hi Chrysostomos,
    I assumes your device name is CSFKIKACHRISTOU
    You have added an ower id t the Device
    You have allowed CTI Control for the device
    You have associated the device to your user in End User Page under Device association.
    Your user has is a member of both Standard CCM End Users and Standard CTI Enabled groups.
    Now if you are using as softphone, the jabber client retrieves the TFTP server IP Addresses from IMP. Once it has the address, the client download the CSF config file direct from the TFTP Server.
    Have you configured the TFTP Servers in IMP?
    Application->Legacy Clients->Settings --- specify primary and backup tftp servers.
    Exit from Jabber completely and re-login.
    See how that goes.
    Ben
    Please rate useful posts

  • Unable to Externally Register Phone Services on Cisco Jabber Client via Expressway E

    Hi,
    I have currently deployed Cisco Jabber along with Expressway C and E for external regeneration without VPN. I have successfully registered IM and Presence service externally on the internet and I am able to chat with other Jabber users.
    I am not able to register phone services for Cisco Jabber client who are registering externally over the internet without VPN.
    I have checked that all the users are able to use IM and Presence along with Phone services in the internal network and over the internet using VPN. I have configured the required DNS SRV records on both the internal and external DNS Servers.
    I am attaching a screen shot of the Jabber Client that is registered over the internet along with this post for your reference.
    Appreciate if you can share your thoughts on the same.
    Please do let me know if you need any further informaiton.
    Thank you.
    Regards,
    Joseph Chirayath.

    I am testing with an android device, and I had to add a "digest user" on the BOT device in order for this to work. Phone services are now connected.

  • How do you remove an old device name from your iTunes account?

    I have several old device names/backups on my iTunes that I want to remove.  They were from old iPhones that we've turned into iPod's for my kids which we needed to create a new device name for them.  So now when I restore a device, I have a list of about 10 different names to choose from.
    How can I erase the old names/backups that we no longer use?  I still have 3 on there that I want to keep though so I don't want to erase all of them.

    iTunes Prefs > Devices.
    Selec a backup and delete it there.

Maybe you are looking for