Device name missing - NW mobile - Handhelds- emulater-Connection Settings

Dear NW mobile developers,
In my handheld emulator in NWDS CE 7.1
i did not find a Device name field in Connection setting screen.
I am following bellow link to configure handheld emulator
http://help.sap.com/saphelp_nwmobile71/helpdata/en/46/7fb5964ca22327e10000000a114a6b/content.htm
please help me to resolve the issue
lakshman balanagu
Edited by: lakshman balanagu on Mar 8, 2011 8:10 PM

Hi,
this document you use seems to be wrong.
You need to enter configuration details like system, ID, Port, client. Once done, you need to create a device in MI7.1 admin portal. In there you define the device by name and add a user to the device. You need to enable the device.
Once you have done this, you can sync your device and it will get the name of he device from MI Server. The default mapping between MI Server and device is done by username, not by devicename. So even if you would ener a device name on your device, it would be overwritten by middleware at first sync.
Also: be aware, you need to have a deic ein state Initial/enabled for this user before you snyc a device first time.
Hope this helps!
Regards,
Oliver

Similar Messages

Device name missing for windows computer

Hi,
I am following the article http://myitforum.com/myitforumwp/2013/11/08/scom-2012-override-free-space-monitoring-for-page-file-drive/ and at the stage of creating dynamic members for a group, in Windows Computer, I do not see a "device name"
field for Windows Computer?
I am on SCOM 2012 R2 UR3. When doing this from the console, it's not the console on the management server (if this matters).
Thans

Hi,
How about doing this from your management server?
Have you import Windows operating system management packs to your management group? If not, please first download the management pack from the below link:
http://www.microsoft.com/en-us/download/details.aspx?id=9296
And import it to your management group.
Regards,
Yan Li
Regards, Yan Li

ISCSI and Solaris device names ..... target binding settings

Hi,
I configured an iSCSI environment with Sparc Solaris 10 U4 software inititator and EMC CLARiiON CX3-10c.
So far it is working, but I`m wondering about the Solaris device names /dev/rdsk/c5t3d0. I disabled MPxIO
in /kernel/drv/iscsi.conf. I have 32 LUN configured in CX3-10c target. The Host LUNs are 0 ...31, but Solaris
created device nodes started with target 3, e.g. c5t3d0s2 (see output from iscsiadm list target).
# iscsiadm list target -S iqn.1992-04.com.emc:cx.hk193001030.a1
Target: iqn.1992-04.com.emc:cx.hk193001030.a1
Alias: 1030.a1
TPGT: 2
ISID: 4000002a0000
Connections: 1
LUN: 31
Vendor: DGC
Product: RAID 10
OS Device Name: */dev/rdsk/c5t34d0s2*
LUN: 30
Vendor: DGC
Product: RAID 10
OS Device Name: */dev/rdsk/c5t33d0s2*
LUN: 1
Vendor: DGC
Product: RAID 5
OS Device Name: */dev/rdsk/c5t4d0s2*
LUN: 0
Vendor: DGC
Product: RAID 5
OS Device Name: */dev/rdsk/c5t3d0s2*
Why are the device node names stared with target 3 instead of target 0 ????
Thanks for your help !!!
Edited by: test111 on Mar 25, 2008 8:36 AM

Hi,
I configured an iSCSI environment with Sparc Solaris 10 U4 software inititator and EMC CLARiiON CX3-10c.
So far it is working, but I`m wondering about the Solaris device names /dev/rdsk/c5t3d0. I disabled MPxIO
in /kernel/drv/iscsi.conf. I have 32 LUN configured in CX3-10c target. The Host LUNs are 0 ...31, but Solaris
created device nodes started with target 3, e.g. c5t3d0s2 (see output from iscsiadm list target).
# iscsiadm list target -S iqn.1992-04.com.emc:cx.hk193001030.a1
Target: iqn.1992-04.com.emc:cx.hk193001030.a1
Alias: 1030.a1
TPGT: 2
ISID: 4000002a0000
Connections: 1
LUN: 31
Vendor: DGC
Product: RAID 10
OS Device Name: */dev/rdsk/c5t34d0s2*
LUN: 30
Vendor: DGC
Product: RAID 10
OS Device Name: */dev/rdsk/c5t33d0s2*
LUN: 1
Vendor: DGC
Product: RAID 5
OS Device Name: */dev/rdsk/c5t4d0s2*
LUN: 0
Vendor: DGC
Product: RAID 5
OS Device Name: */dev/rdsk/c5t3d0s2*
Why are the device node names stared with target 3 instead of target 0 ????
Thanks for your help !!!
Edited by: test111 on Mar 25, 2008 8:36 AM

No Device Name and Port in UserTracking Report for Ipphones

Hello,
I'm having problems with Usertracking to IpPhones. The report provides information of usertracking IPPhone number, CCM Address, MAC, etc.. But the information in "Device Name" and "Port" (which would be connected) do not appear.
The CCM normally appear in Topology Services, and reports Usertracking EndHosts to operate normally, even in the same switches that the phones are connected.
Thanks

What version of Campus Manager are you running ?
What version of the Call Manager do you have ?
What kind of IP Phone is this ?
Post screenshot of the problem re-run data collection and UT . Ensure that you don't have any filters in place and all subnets are included.
Do an snmpwalk from the CiscoWorks LMS server to the Cisco Call Manager and see if you can poll those values from the cli and let us know the results using the "ccmPhoneTable" ?
Get the ut.log and ani.log with neccesary debugs enabled for phones.

How do I find my device name?

I have installed an app that requires the device name of syncing mobile device. I went to settings/About Phone but could not find the "Device Name".

andyshriver,
I want you to be sure of what your device name is. What model phone do you have?
SandyS_VZW
Follow us on Twitter @VZWSupport

Can you retrieve a task list for a user without specifying that user's connection settings?

Hi
I would like to know if it is possible to obtain a list of workspace tasks for a user of my choice. In the following code, taken from the relevant quickstart, I am able to retrieve a list of tasks for "administrator" because it is the "administrator" settings specified in the connection properties when obtaining an instance of ServiceClientFactory. If I wanted to obtain a list of tasks for user "greg", for example, is there a way I can do this without having to specify the settings for "greg" in the connection properties? I tried to invoke the setUserId() method of the TaskFilter interface but no tasks are returned for user "greg" in that scenario. The aforesaid user has 3 tasks assigned to him. If I specify the user name and password for "greg" in connection settings, I am able to retrieve his list of tasks successfully. However, this is undesirable because I want to be able to retrieve a list of tasks for any user of my choice, by passing a parameter. Is that possible? Code follows:
//Start of code
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
import com.adobe.idp.taskmanager.dsc.client.TaskManagerClientFactory;
import com.adobe.idp.taskmanager.dsc.client.TaskManagerQueryService;
import com.adobe.idp.taskmanager.dsc.client.query.StatusFilter;
import com.adobe.idp.taskmanager.dsc.client.query.TaskFilter;
import com.adobe.idp.taskmanager.dsc.client.query.TaskRow;
import java.util.Iterator;
import java.util.List;
import java.util.Properties;
public class RetrieveTaskInfo {
    public static void main(String[] args) {
        try {
            //Set connection properties required to invoke LiveCycle
            Properties connectionProps = new Properties();
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_EJB_ENDPOINT, "jnp://localhost:1099");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,Service ClientFactoryProperties.DSC_EJB_PROTOCOL);
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
            //Create a ServiceClientFactory object
            ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
            //Create a TaskManagerQueryService object
            TaskManagerQueryService queryManager = TaskManagerClientFactory.getQueryManager(myFactory);
            //Define search criteria by performing a search on
            //Assigned tasks (tasks assigned to the user specified
            //in connection properties)
            TaskFilter filter = queryManager.newTaskFilter();
            StatusFilter sf = filter.newStatusFilter();
            sf.addStatus(StatusFilter.assigned);
            filter.setStatusFiltering(sf);
            //Perform the search
            List result = queryManager.taskList(filter);
            //Create an Iterator object and iterate through
            //the List object
            Iterator iter = result.iterator();
            while (iter.hasNext()) {
                TaskRow myTask = (TaskRow)iter.next();
                //Get the task identifier value
                long taskId = myTask.getTaskId();
                //Get the status of the task
                long taskStatus = myTask.getTaskStatus();
                //Get the name of process on which this task is based
                String processName = myTask.getProcessName();
                //Get the task description
                String taskDes = myTask.getDescription();
                System.out.println("The task identifier is " + taskId + "\n" +
                        "The status of the task is " + taskStatus + "\n" +
                        "The name of the process on which the task is based is " + processName + "\n" +
                        "The task description is " + taskDes);
        } catch(Exception e) {
            e.printStackTrace();
//End of code
Thanks
Darren

Paul,
Thanks very much, I never tried just asking for the parameter I was looking at the entire list coming back from a query with no filters. Using the DBMS_LDAP package you can in fact get their GUID.
I understand your concern for the use of the field and for other reasons have moved to a different identifier to tie OID accounts to our internal application user accounts.
Thanks very much, I'm still glad to know how to do get at the info.

Bluetooth connection to multiple devices with the same device name

I just got a new iPhone 4 and am having trouble connecting it to my car's bluetooth. We have two GM vehicles which both have bluetooth. I can connect to one vehicle with no problems, but when I try to connect to the other, the phone tries to connect to the first car since both have the device name of "General Motors". With my old phone, I could change the name of the connection in the phone so that each car had a different name. How do I do this on my iPhone?
Thanks for the help?

No. It's a limitation of the BlueTooth protocol.

Getting "There are no speakers connected to the AirPlay device " device-name "

For the past several years, I have had a stereo receiver hooked up to and airport express to stream music wirelessly from my iMac to stereo speakers. All of a sudden, I started getting the message "There are no speakers connected to the AirPlay device "<device-name>". So, what changed, we recently changed ISP from Verizon DSL to RCN cable, I changed my Apple ID (due to the ISP change), I upgraded all computers to OS X Lion, and I have a new iPhone5. I can't tell you exactly when during the process things went bad, but I can tell you what I have done to solve the problem:
I checked that my devices are configured correctly. The network layout is as follows: I have an Airport Express on the 3rd floor of my house, along with the iMac containing the iTunes library, I have an Airport Express on the 2nd floor acting as a repeater, I have an Airport Express on the 1st floor acting as a repeater and connected to my stereo receiver and 4 speakers. I control which set of speakers is "on" via the receiver.
I checked that I can get sound out of the speakers via the receiver by selecting FM and got radio to play, so I believe the receiver is ok.
I swapped this receiver with another receiver and got no sound and still the message "there are no speakers connected..."
I moved the Airport Express from the AUX port to the TAPE2 port to check the port. Still no sound.
I checked the cable with a Bose box and got sound, so I believe the cable is ok.
I plugged a headset directly into the Airport Express and got no sound.
I swapped the 2nd floor and 1st floor Airport Express units, reconfigured the new 1st floor unit to turn on Air Play and still get no sound and the error message.
I am controlling the music using the Remote app on my iPhone. I have configured the new device to use this library.
I am tired, confused and at a loss. What can be going on here?

All that I can suggest is that you perform a Factory Default Reset on the Express to wipe the current settings and set it up again.
If you are still having problems after that, you need to take the Express to an Apple Store or Apple Servicer near you to let them have a look at what I suspect is a defective AirPort Express.
Resetting an AirPort Base Station or Time Capsule FAQ

How do I change device name after connecting to old machine?

That's right, I've gone ahead and connected my new power book to my old dual G5 in order to get the information onto the new machine.
Now, my new machine has my Dual G5 name as it's device name.
How can I change this so my power book has the correct name?

I wish that was it, but that only changes the name of the "Hard Drive", not the actual device name.
In other words, when browsing the network there's 2 computers with same name.
Any other suggestions?

An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.

Hi,
So I have 2 PC's and I sign with the same credentials. I have a hard drive which I decided to share. In the setting I created permissions for the user credentials of both vcomputers and have full control access.
Basically, everytime I open my laptop after and it wakes up and try to connect to the network drive, I get the error
An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.
I need to stay disconnecting all drives and reconnecting them. WHen I restart my PC the network drives restore perfectly. I don't understand why it doesnt work on wake.
Any ideas?

It seems that when a machine goes into sleep, the network connection is disconnected, naturally, but the machine still has the connection mapped. If you run the 'net use' you will see the connection. When you try to reconnect it, it sees the
connection and gives you the error.
I do not know if you can directly modify this behavior. However, as a work around, you could build a simple script like:
net use 'connection' /delete ( write it into a text file and save it has a .bat file.)
Use scheduled tasks to have the script run right before the machine goes into sleep. You can do so by setting the task to RUN ON Event: event 42 for the KERNEL_POWER source.
You can see http://superuser.com/questions/679195/run-a-script-when-hibernating-windows-8 for more info .

Best mobile/handheld printer - for solid win store app connection

Hi,
I am looking for opinions on what is the best mobile/handheld printer for printing simple receipts from my win store app. I have my app connecting to a legacy handheld printer and it keeps dropping connections. I would appreciate any thoughts
on best printers to connect to my c# app and any pointers I should be aware of.
I have been looking at the zebra ones...any opinions on them?
Thanks

Congrats to Carmelo!
Windows Phone and Windows Store Apps Technical Guru - February 2015
Carmelo La Monica
Windows Phone 8: control Nokia Maps (Part 3)
JH: "Part 3 of the series how to work with the Nokia maps control. As the previous articles this one contains a lot of code snippets and some pictures. Good work!"
Ed Price: "A great topic, a fantastic breakdown of sections with clear descriptions, and a nice mix of code formatting and helpful images! Another stellar article from Carmelo! Great job including the link back at the end to the portal
article!"
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

When i go to sync music from my itunes it says "the mobile device is not started" and it doesnt connect. any help?

when i go to sync music from my itunes it says "the mobile device is not started" and it doesnt connect. any help????

For Windows: iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

RV 120W:How to block device from connected to interner through device name?

Hi guys,
i am using the router,rv 120w
can i block device from connected to internet through device name?
for example,the Android Phone wil always has "android" in their device name.How can i block the device which has "android" in their device name from link to internet?
Thanks.

Good morning
Thanks for using our forum
Hi Louis, my name is Johnnatan and I am part of the Small business Support community. You can´t block any device by the name, however you can block devices using it mac-address. Go Firewall> Access Control>Mac Filtering in this section you can specify the mac address of the devices and block them.
I hope you find this answer useful,
*Please mark the question as Answered or rate it so other users can benefit from it"
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Device name on MI 7.1 SP9

Hi experts,
We updated our MI version to 7.1 SP9, or prior version was 7.1 SP8.
On mobile client there is no field to register de Device name like the prior version, where do I register the device name on client?
Another question, where can I find 7.1 SP9 release notes?
Tanks,
Gabriela

Hi,
Please see that you following these steps:
a ) On a fresh installed client, create user same to DOE user
b) Login, goto to ManageDevice-> Settings->Connection Settings from the main menu "System". Enter the system details (host,port etx).
c) AT DOE, while creation of DOE the DEVICE_NAME needs to set as a mandatory parameter.
d) Perform first sync, this will fail and the all mandatory parameters req info will flow down.
e) Go to screen in step b) all the mandatory parameters required iff includin device name will have to be provided now.
f) Save n perform sync again. This time the device will registered.
g) Go to Manage Device->Information->Device Information to see the details on the device.
Some documentations:-
Please follow the below given link to know more about registration
<http://help.sap.com/saphelp_nwmobile71/helpdata/EN/6a/2d817fa065463084bdf55d8f60501c/frameset.htm>
Identifying Device Attributes for Registration
<http://help.sap.com/saphelp_nwmobile71/helpdata/EN/45/64526346711debe10000000a155369/frameset.htm>
Make sure that all the mandatory parameters for registration are filled correctly.
Regards,
Nipun
Edited by: Nipun Dev on Dec 3, 2009 10:43 AM

Two ipods on same computer - same device name

When installing my new nano, it took on the same device name as my wife's. How can I change the device name so that the computer recognizes it as a different ipod and will therefore only sync with the playlists I want on mine, as well as when she syncs?

When only one iPod is connected, select it in the iTunes source list, click on its name, and type a new name. You may then need to follow the instructions in this article.
(27381)

Device name missing - NW mobile - Handhelds- emulater-Connection Settings

Similar Messages

Maybe you are looking for