Device name on MI 7.1 SP9

Hi experts,
We updated our MI version to 7.1 SP9, or prior version was 7.1 SP8.
On mobile client there is no field to register de Device name like the prior version, where do I register the device name on client?
Another question, where can I find 7.1 SP9 release notes?
Tanks,
Gabriela

Hi,
Please see that you following these steps:
a ) On a fresh installed client, create user same to DOE user
b) Login, goto to ManageDevice-> Settings->Connection Settings from the main menu "System". Enter the system details (host,port etx).
c) AT DOE, while creation of DOE the DEVICE_NAME needs to set as a mandatory parameter.
d) Perform first sync, this will fail and the all mandatory parameters req info will flow down.
e) Go to screen in step b) all the mandatory parameters required iff includin device name will have to be provided now.
f) Save n perform sync again. This time the device will registered.
g) Go to Manage Device->Information->Device Information to see the details on the device.
Some documentations:-
Please follow the below given link to know more about registration
<http://help.sap.com/saphelp_nwmobile71/helpdata/EN/6a/2d817fa065463084bdf55d8f60501c/frameset.htm>
Identifying Device Attributes for Registration
<http://help.sap.com/saphelp_nwmobile71/helpdata/EN/45/64526346711debe10000000a155369/frameset.htm>
Make sure that all the mandatory parameters for registration are filled correctly.
Regards,
Nipun
Edited by: Nipun Dev on Dec 3, 2009 10:43 AM

Similar Messages

Device Name for Cisco Jabber

I found a document on Jabber Developer that explains all steps for the Cisco Jabber CUCM Setup Guide (http://developer.cisco.com/web/jabber-developer/jabber-sdk-cucm-guide), the phone type must be Cisco Unified Client Services Framework, everything fine, but says that the Device Name should be as ECP<username> when original setup guides says that must be as CSF<username>.
My users setup Device Name are as CSF<username>, but just to follow a best practice, should I change all Device Names to ECP<username>??
Regards,
Juan Carlos Arias

There's another thread on which someone mentioned some problems when using ECP for device name. Windows for jabber method of operation is the name of it. Do you have any configs using ECP??
Since I already have this in m lab working as expected i'll configure a couple of users with ECP and see if something changes, just wondering if you have something configured with ECP already.
Sent from Cisco Technical Support iPad App

How to get the ASM to OS device name mapping

Hi all,
This seems to be an often answered question, but usually the answers specify what to do on the OS (e.g. run oracleasm etc) and/or in the ASM database running on the ASM Host (select * from V$...).
In our situation have plug-ins collecting data from Agents. Plugins collect data from Oracle db/ASM targets and from storage arrays.
Back on the OMS we want to be able to report on the ASM to OS device name mapping. To report, we use either the default metadata UI (i.e. data from the sysman.mgmt_emx_... tables) or we have a BI Publisher report that queries the OEM Repository Database (and can join the ECM tables from the different plug-ins).
The link between the ASM path and the OS device name does not seem to be collected by either the Oracle DB/ASM plug-in, nor by any other plug-in (Host/Storage/...).
It would be easy to go to Linux and run a few commands, but we need to support multiple platforms, like AIX, Solaris x86, Windows as well.
A complicating factor is that ASM can be installed in different configurations, e.g. using ASMlib or using udev...
I really suspect this wheel has been invented before?! Or is it really a matter of having multiple OS-specific low-level scripts and adding a bunch of instance parameters for allowing the user to specify all OS-specific path/utility names etc?
Any suggestions welcome... :-)
Many thanks,
Ed

Google is your best friend ;-)
Those are standard CGI variables, must be available in PHP/ASP(X)/JSP/your-favorite.
Anyway, try this:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
/** Creates a table showing the values of all the CGI variables.
* Part of tutorial on servlets and JSP that appears at * http://www.apl.jhu.edu/~hall/java/Servlet-Tutorial/ * 1999 Marty Hall; may be freely used or adapted. */ public class ShowCGIVariables extends HttpServlet { public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html"); PrintWriter out = response.getWriter(); String[][] variables = { { "AUTH_TYPE", request.getAuthType() }, { "CONTENT_LENGTH", String.valueOf(request.getContentLength()) }, { "CONTENT_TYPE", request.getContentType() }, { "DOCUMENT_ROOT", getServletContext().getRealPath("/") }, { "PATH_INFO", request.getPathInfo() }, { "PATH_TRANSLATED", request.getPathTranslated() }, { "QUERY_STRING", request.getQueryString() }, { "REMOTE_ADDR", request.getRemoteAddr() }, { "REMOTE_HOST", request.getRemoteHost() }, { "REMOTE_USER", request.getRemoteUser() }, { "REQUEST_METHOD", request.getMethod() }, { "SCRIPT_NAME", request.getServletPath() }, { "SERVER_NAME", request.getServerName() }, { "SERVER_PORT", String.valueOf(request.getServerPort()) }, { "SERVER_PROTOCOL", request.getProtocol() }, { "SERVER_SOFTWARE", getServletContext().getServerInfo() } }; String title = "Servlet Example: Showing CGI Variables"; out.println(ServletUtilities.headWithTitle(title) + "\n" + "
" + title + "\n" + "\n" + "\n" + "CGI Variable Name
Value"); for(int i=0; iNot specified"; out.println("
" + varName + "
" + varValue); } out.println("
"); } public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { doGet(request, response); } }

How do you remove an old device name from your iTunes account?

I have several old device names/backups on my iTunes that I want to remove. They were from old iPhones that we've turned into iPod's for my kids which we needed to create a new device name for them. So now when I restore a device, I have a list of about 10 different names to choose from.
How can I erase the old names/backups that we no longer use? I still have 3 on there that I want to keep though so I don't want to erase all of them.

iTunes Prefs > Devices.
Selec a backup and delete it there.

Bluetooth connection to multiple devices with the same device name

I just got a new iPhone 4 and am having trouble connecting it to my car's bluetooth. We have two GM vehicles which both have bluetooth. I can connect to one vehicle with no problems, but when I try to connect to the other, the phone tries to connect to the first car since both have the device name of "General Motors". With my old phone, I could change the name of the connection in the phone so that each car had a different name. How do I do this on my iPhone?
Thanks for the help?

No. It's a limitation of the BlueTooth protocol.

Two ipods on same computer - same device name

When installing my new nano, it took on the same device name as my wife's. How can I change the device name so that the computer recognizes it as a different ipod and will therefore only sync with the playlists I want on mine, as well as when she syncs?

When only one iPod is connected, select it in the iTunes source list, click on its name, and type a new name. You may then need to follow the instructions in this article.
(27381)

Multiple Device Names

Once I upgraded to Yosemite, I noticed in Finder that my device name would change and under the Shared section, there was multiples of my computer. In Devices, it shows COMPUTER (2) and then Macintosh HD. The number changes all the time as well. Under Shared, I see COMPUTER, COMPUTER (2), COMPUTER (3) and COMPUTER (4). There is no way to delete them and I think it's the reason I am having difficult Wi-Fi syncing my iPhone 6 and iPad to iTunes. Can someone offer a suggestion on how to make my computer only have the one name (as it did in Mavericks)? Thanks.......

Experiencing the same thing. Have tried everything to rectify the situation, but my computer name and local addressing keep changing. Be sure to log the bug so Apple can get this fixed: http://www.apple.com/feedback/macosx.html

How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto? I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help! Thanks!

I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help! Thanks!
I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto. However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD.
So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info. That means no syncing....
I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
I am puzzled. I appreciate for your advice and help.
Thank you!

It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
And then on the right-hand side :

Is it possible to include the device name in an e-mail signature?

Greetings,
I am currently managing 150 iPads we have deployed in our school system. The iPads are on carts of 30 which are moved from classroom to classroom as needed. For student work I have set up Dropbox and it has been working fine. However, a few teachers requested the iPads be set up with e-mail which can be used to prevent filling up our Dropbox space. I have successfully done this using a shared Exchange e-mail address between all the devices. However, this has begun to cause some minor issues as the students can send an e-mail essentually anonymously from any of the iPads. We are trying to avoid creating e-mail accounts for all the students or iPads and I figured the easiest way to do this would be to add the device name to the e-mail signature. After searching for a while I have not come up with a yes or no as to whether this is possible or not. If it is not, are there any other solutions that don't involve a lot of work after reimaging the devices. Thanks in advance!
~Cameron

You can set the signature for an email to be anything you want it to be. Go to the Mail, Contacts, Calendars setting and go to the Signatures area. There is however no way I know of to lock this setting, so the students can just remove the device name if they know about the setting. I also don't know if there's a way to automate the configuration so you don't have to do this manually on each iPad. Perhaps someone else here will know.
Regards.

Getting "There are no speakers connected to the AirPlay device " device-name "

For the past several years, I have had a stereo receiver hooked up to and airport express to stream music wirelessly from my iMac to stereo speakers. All of a sudden, I started getting the message "There are no speakers connected to the AirPlay device "<device-name>". So, what changed, we recently changed ISP from Verizon DSL to RCN cable, I changed my Apple ID (due to the ISP change), I upgraded all computers to OS X Lion, and I have a new iPhone5. I can't tell you exactly when during the process things went bad, but I can tell you what I have done to solve the problem:
I checked that my devices are configured correctly. The network layout is as follows: I have an Airport Express on the 3rd floor of my house, along with the iMac containing the iTunes library, I have an Airport Express on the 2nd floor acting as a repeater, I have an Airport Express on the 1st floor acting as a repeater and connected to my stereo receiver and 4 speakers. I control which set of speakers is "on" via the receiver.
I checked that I can get sound out of the speakers via the receiver by selecting FM and got radio to play, so I believe the receiver is ok.
I swapped this receiver with another receiver and got no sound and still the message "there are no speakers connected..."
I moved the Airport Express from the AUX port to the TAPE2 port to check the port. Still no sound.
I checked the cable with a Bose box and got sound, so I believe the cable is ok.
I plugged a headset directly into the Airport Express and got no sound.
I swapped the 2nd floor and 1st floor Airport Express units, reconfigured the new 1st floor unit to turn on Air Play and still get no sound and the error message.
I am controlling the music using the Remote app on my iPhone. I have configured the new device to use this library.
I am tired, confused and at a loss. What can be going on here?

All that I can suggest is that you perform a Factory Default Reset on the Express to wipe the current settings and set it up again.
If you are still having problems after that, you need to take the Express to an Apple Store or Apple Servicer near you to let them have a look at what I suspect is a defective AirPort Express.
Resetting an AirPort Base Station or Time Capsule FAQ

Changed (renamed) device name in Intune app on iOS device. This change is not showing up in the admin portal, even after 24 hours

Hi,
I am trying to update a mobile devices names. Initially, I changed the iOS device name (Settings->General->About->Name) and then I also renamed the device in the Intune app on the device. Neither of these changes are propagating through
to the admin portal, even after 24 hours. Is there anything else I should be doing for this to work?
Thanks in advance for your help.
Simon.

I'm seeing the same thing as Simon, I changed the iOS device name in both places on an iOS device and the name in the Intune console is still "iPhone" which is really unhelpful as I'm sure you can imagine. Is there some other place
that we should be going to rename devices so they are more easily identifiable in the Intune console?
Thanks!

How do I download the music from iTunes onto an old iPhone 3gs? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my old iPhone.

How do I download the music from iTunes onto an old iPhone 3gs without affecting my iPhone 5? I have reset the iPhone to factory settings and when I plug it in it wants to use the device name for my current iPhone 5 and I don't want to change anything on my current iPhone. iTunes won't let me change the device name for the 3gs. I just want to use the old iPhone like an touch.

Hi littlemansa,
If I am understanding you correctly, it sounds like you are returning to an old iPhone that has been erased and you would like to set it up as a new device without restoring from a backup which would affect the name of your iPhone, as well as the contents therein. I have an article for you that can help you set up your iPhone as a new device, and that information can be found below:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
http://support.apple.com/en-us/HT4137
Basically, it seems like you may be stuck on a screen that is asking if you would like to restore your device from the backup that is filed under the name of your new iPhone, or if you would like to set up the device as a new device. I would suggest that you set it up as a new device to achieve your desired results.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

How do I get device names to show on my airport express rather than the device ID?

When I look at devices that are running on my AirPort Extreme and airport express (running as a range extender) I only see their ID numbers. How do I get it so that I can see the device name? In other words instead of it showing 00:11:D9:38:3C:DA it would show Nest Thermostat. ive seen this on other peoples networks and cant seem to figure it out on mine

Things are hit and miss as far as client names being displayed in AirPort Utility. You might see a device name displayed at times and not at other times.
Unfortunately, Apple provides no settings or controls in AirPort Utility for this. Things will not look like the nice Apple advertisements if that is what you might be hoping for.
You might want to let Apple know that you would like more control for this "feature". If so, please use the link provided below.
Apple - AirPort Extreme - Feedback

Microsoft Windows Network: The local device name is already in use.

I posted in : http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/disconnected-network-drive-error-as-follows-an/9a877c38-5e86-4c34-84c2-427a965577c6?page=2
Error:
"An error occurred while reconnecting drive letter to \\network server\share folder.
Microsoft Windows Network: The local device name is already in use.
This connection has not been restored."
1) A workstation is running Windows 7
2) The user has a drive letter mapped to a UNC
3) The connection is interrupted at some point and then restored
4) Upon attempting to access the mapped network drive, the user gets the error about the letter being
already in use.
Extremely disappointed that some of the posts marked as answers were obviously not, shows how poor the moderators here are.
My latest results clearly point to a Windows 7 client problem:
I received the error.
Had run nslookup so had a prompt open.
ran dir z:    worked. went to Windows Explorer, same error.
ran dir z:\sharename    worked. went to Windows Explorer, same error.
copy con z: test.txt then type test.txt; could create and retrieve file. Went and clicked on mapped drive in Windows explorer and received same error.
Obviously(?) not a Server or Networking problem. Ran Malwarebytes from bootable CD (client doesn't believe in AV). Didn't happen with USB flash drive.
Any other ideas?
I already have tried:
support.microsoft.com/kb/317021
http://support.microsoft.com/kb/303339
ftp://ftp.microsoft.com/misc1/BUSSYS/WINNT/KB/Q194/8/29.TXT
http://support.microsoft.com/kb/273151 Exchange issue
http://support.microsoft.com/kb/2663418   hotfix for win7
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/78276f1d-f7f9-416b-b903-
b9a18ecba67b/
http://support.microsoft.com/kb/297684
Ran MicrosoftFixit50494.msi
net use z: \\SERVER\ShareFiles /persistent:yes
http://support.microsoft.com/kb/2663418
http://support.microsoft.com/kb/297684#LetMeFixItMyselfAlways
http://support.microsoft.com/gp/gp_fixit_windows/en-us
http://support.microsoft.com/mats/windows_battery_power_settings
http://support.microsoft.com/kb/979470/en-us ???
http://support.microsoft.com/kb/947235/en-us
http://msdn.microsoft.com/en-us/library/cc232765.aspx
http://support.microsoft.com/kb/942817
Q939820? server 2003 sp3 Fix226580 341940_ENU_i386_zip.exe
http://support.microsoft.com/kb/983620
http://support.microsoft.com/kb/297684
net config server /autodisconnect:-1
KB Article Number(s): 2663418 Hotfix
http://support.microsoft.com/kb/983620
http://answers.microsoft.com/en-us/feed/t/9a877c38-5e86-4c34-84c2-427a965577c6
http://answers.microsoft.com/en-us/feed/t/9a877c38-5e86-4c34-84c2-427a965577c6
net use z: \\SERVER\1_CADFiles /persistent:yes SBS2011 Server with current service packs
Win7 Pro users with current Windows Update status
http://support.microsoft.com/kb/2663418
http://support.microsoft.com/kb/297684#LetMeFixItMyselfAlways
http://support.microsoft.com/gp/gp_fixit_windows/en-us
http://support.microsoft.com/mats/windows_battery_power_settings
http://support.microsoft.com/kb/979470/en-us ???
http://support.microsoft.com/kb/947235/en-us
http://msdn.microsoft.com/en-us/library/cc232765.aspx
http://support.microsoft.com/kb/942817
netsh winsock reset catalog
netsh int ip reset reset.log
Q811259
Q299357
Q937624
secpol.msc >> Lanman authentication level "send LM and NTLM"
net config server /autodisconnect:-1
changed server video to "standard vga"
disabled power save for NIC
Cannot disable Intell Raid software
http://technet.microsoft.com/en-us/library/cc780360%28v=WS.10%29.aspx   restart
http://technet.microsoft.com/en-us/library/bb726989.aspx browse list
Q138365
net config server /autodisconnect:-1
two additional registry keys are added:
anndelta: REG_DWORD: 0xbb8
announce: REG_DWORD: 0xf0
netsh winsock reset
netsh interface ipv4 reset
netsh interface ipv6 reset
ipconfig /flushdns
shutdown /r
sfc /scannow
http://support.microsoft.com/kb/929833
http://social.answers.microsoft.com/Forums/en-US/w7network/thread/306dd446-7630-4d5b-8aa0-
40fb839b293a    dns issue
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/i-have-this-problem-on-three-
win7-x64-systems-two/d44ed544-65f5-43a7-9e17-d2d10085c765?page=2
Leftover Homegroup components or Firewall?
disable DNS Client = dnscache
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/service-control-manager-reports-
that-a-timeout/e2e76ae5-ed09-4685-af86-5f8c2cd120bf     Norton Internet Security uninstall issues
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/windows-7-no-dns-or-no-network
-after-resume-wake/c1253ab0-4793-449e-8975-a900ce7dec4f
NSLOOKUP
KB Article Number(s): 983620 Hotfix

This is usually because the drive letter assigned to the network share is taken by something else. Maybe, by a removable drive.
Moderators and other answerers do their best to help specific cases, but everyone has their own situation. Apply common sense to the replies you find in the forums.
When you typed dir z: - is Z: the drive letter you wanted for this share, or it was automatically assigned?
-- pa
Alternatively you could try using common sense when you post, as well as taking the time to read the entire issue post so that you can avoid showing both your ignorance and arrogance (arrogance without any competency to back it I might add).
Suggesting that it might be "another drive" that took over the mapping shows your lack of reading comprehension and is unhelpful.   Please take the time to, once again, read first.
Lastly moderators here generally show little technical skill beyond entering search words into a knowledge-base of articles and then applying the results incorrectly further exacerbating the situation for the customer.

Preview on [device name] option not available

Preview on [device name] option not available on Folio Overlays

In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
Are you using InDesign CS5.5 or InDesign CS6?
You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
Uwe

Device name on MI 7.1 SP9

Similar Messages

Maybe you are looking for