Device not ready

Hi! I need your help guys! I'm having a problem in my laptop. Whenever I install Rome: Total War game it always say that my device is not ready and after a while it will just shut down by itself and show this atheros thing and I have no idea what that is. What should I do?

affirm both HD's are formated and partitionated. i thik it's a trouble with the via s-ata/raid driver (or maybe chipset) because there is not realy a problem. i can use the pc normaly, but i wondered about all these entrys in the windows systems log file. and there are realy a lot of it.

Similar Messages

[SOLVED] Network Manager - Device not ready

Hey,
I can't use the wlan feature of networkmanager because its grayed out with "device not ready" written on it.
My wlan device is definitely enabled.
iwconfig:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
I use the
Intel Corporation WiFi Link 5100
thx 4 help
Last edited by GNA (2011-04-13 09:13:25)

ls -l /var/run/daemons:
total 0
-rw-r--r-- 1 root root 0 Apr 5 09:27 acpid
-rw-r--r-- 1 root root 0 Apr 5 09:27 crond
-rw-r--r-- 1 root root 0 Apr 5 09:27 dbus
-rw-r--r-- 1 root root 0 Apr 5 09:27 laptop-mode
-rw-r--r-- 1 root root 0 Apr 5 09:27 netfs
-rw-r--r-- 1 root root 0 Apr 5 09:27 networkmanager
-rw-r--r-- 1 root root 0 Apr 5 09:27 syslog-ng
groups:
lp wheel rfkill games network video audio optical storage scanner power
users networkmanager
I was originally not in the network and networkmanager group but tried adding myself in the course of reading your post, because I thought maybe that could be the reason, but it didn't change anything
I had to create the networkmanager group because it was not existent but https://wiki.archlinux.org/index.php/Groups#Groups says this group should exist.
Last edited by GNA (2011-04-05 14:00:08)

When burning to blu-ray gets 99% done then error "device not ready"

I have Elements 11 and an ASUS Combo burner. I can burn to DVDs but when I try to burn to blu-ray it gets done encoding and compiling then at 99% switchs message to "device not ready". The computer sees the drive and the disc is formatted. Any thoughts on why Elements stops right when at end before actually burning to the disc?

I don't know the answer but I suspect Blu-Ray disks are not supported in PSE. I haven't tried it personally but I will have to try it one of these days when my computer is repaired to my satisfaction. I was without a machine for nearly two weeks and now I am using a borrowed one from a friend.

Adobe Encore Problem: 'Device Not Ready' when burning to BluRay

Hi Im using Encore cs6 to burn to BluRay. The programme runs for about 20 mins or so then suddenly stops and the message 'device not ready' comes up.
I downloaded and tried ImgBurn to make sure my BluRay drive was working properly and it had no problems, the problem is just with Encore. I saved my Encore project as an image in order to burn with Imgburn but it did not take across the menu I had designed.
Im under a deadline to get this dvd finished, does anyone have any ideas?
Im using an Alienware computer on Windows 8.
thanks!
Tony

I don't recall this occurring with imgBurn or Encore doing the burning. I can only imagine that your project is corrupt.
I would create a new, test project, to see if the menus "behave."
Create a new Encore project, new name, in the new project settings make it Bluray.
Add menus from the library: Crib Menu HD and City Lights HD. On Crib, in properties, motion tab, click on the video option and hit delete (this will remove the motion from the menu).
On that same menu, delete the bottom two buttons. On the city lights menu, delete all buttons but the top.
Select the m2v file (from the Crib motion menu) and select new timeline. Select that timeline and set the end action as "Last menu."
On the Crib menu, link the top button to the City menu. Link the second button to the timeline.
On the city menu, link the button to the Crib menu.
Build to a BD image. Burn with ImgBurn. Are the menus the same?

Errors verifying library (opening library: device not ready) (qlm connection)

OSB Version:     10.4.0.3.0
OS Version:          Oracle Enterprise Linux 5.8
Device:               SL3000
Vendor:               STK
Firmware:              4.00
ob> lsdev
library             sl3000           in service
drive 1           tape1            in service
drive 2           tape2            in service
drive 3           tape3            in service
ob> pingdev -a -v
Info: pinging library sl3000.
Info: library    sl3000           accessible.
Info: pinging drive tape1.
Info:   drive 1 tape1            accessible.
Info: pinging drive tape2.
Info:   drive 2 tape2            accessible.
Info: pinging drive tape3.
Info:   drive 3 tape3            accessible.
ob> vfylibs -a -v
collecting dte info...
   library sl3000 ...
   opening library: device not ready
verifying dte definitions against drive objects...
Summary of verify errors:
   library open errors:        1
Command     /usr/local/oracle/backup/.bin.linux86_64/obtool --gui -u 'admin' 'inventory' -L 'sl3000'
Status     Error: unable to open qlm connection - operation timed out
cat /usr/local/oracle/backup/admin/log/device/sl3000/obrobotd
2013/09/26.17:29:45 obrobotd version 10.4.0.3.0 (linuxamd64) -- Wed Jun 5 17:00:12 PDT 2013
Copyright (c) 1992, 2013, Oracle and/or its affiliates. All rights reserved. on <hostname> pid 8740
2013/09/26.17:29:45 on host <hostname>: /usr/local/oracle/backup/.etc.linux86_64/obrobotd sl3000
2013/09/26.17:29:45 listening for requests on port 34160, interfaces:
2013/09/26.17:29:45     eth0 (::ffff:***.***.***.***)
2013/09/26.17:29:45     bondib0 (::ffff:***.***.***.***)
2013/09/26.17:29:45 use_two_request_queues: 1
2013/09/26.17:29:45 process_requests_max_cnt: 17
2013/09/26.17:29:45 sl3000 reserved ok, cookie = 0xf0ad40c
2013/09/26.17:29:52 lm setup failed - device not ready (SCSI library)
2013/09/26.17:29:52 obrobotd exitting

How are your devices configured? Can you supply the output from "obtool lsdev -lvg" please.
Thanks
Rich

NetworkManager device not ready

NetworkManager starts fine, but it still doesn't work.
Apr 7 23:31:09 Nice NetworkManager: <WARN> nm_signal_handler(): Caught signal 15, shutting down normally.
Apr 7 23:31:09 Nice NetworkManager: <info> (wlan0): taking down device.
Apr 7 23:31:09 Nice NetworkManager: <info> (eth0): cleaning up...
Apr 7 23:31:09 Nice NetworkManager: <info> (eth0): taking down device.
Apr 7 23:31:09 Nice NetworkManager: <info> exiting (success)
Apr 7 23:31:10 Nice NetworkManager: <info> starting...
Apr 7 23:31:10 Nice NetworkManager: <info> Trying to start the modem-manager...
Apr 7 23:31:10 Nice NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list.
Apr 7 23:31:10 Nice NetworkManager: <info> Found wlan radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:1c.1/0000:02:00.0/ieee80211/phy0/rfkill0) (driver <unknown>)
Apr 7 23:31:10 Nice NetworkManager: <info> WiFi enabled by radio killswitch; enabled by state file
Apr 7 23:31:10 Nice NetworkManager: <info> WWAN enabled by radio killswitch; enabled by state file
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): driver supports SSID scans (scan_capa 0x01).
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): new 802.11 WiFi device (driver: 'ath9k')
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): now managed
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): device state change: 1 -> 2 (reason 2)
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): bringing up device.
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): preparing device.
Apr 7 23:31:10 Nice NetworkManager: <info> (wlan0): deactivating device (reason: 2).
Apr 7 23:31:10 Nice NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): carrier is OFF
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): new Ethernet device (driver: 'atl1c')
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/1
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): now managed
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2)
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): bringing up device.
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): preparing device.
Apr 7 23:31:10 Nice NetworkManager: <info> (eth0): deactivating device (reason: 2).
Apr 7 23:31:10 Nice NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.5/0000:03:00.0/net/eth0
Apr 7 23:31:10 Nice NetworkManager: <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Apr 7 23:31:10 Nice NetworkManager: <info> Trying to start the supplicant...
And when I try to connect with cnetworkmanager:
Apr 7 23:32:37 Nice NetworkManager: <WARN> connection_added_default_handler(): Connection (2) /MyConnection/1 failed to activate: (2) Device not managed by NetworkManager

I'm having kind of the same problem here. After a crash I had the other day, my networkmanager stopped working (don't ask me why!!).
So, I removed NM completely and installed it from scratch following step by step all the instructions in the NetworkManager wiki; but the only thing I get is an applett that insists in saying "network manager disabled" (no matter whether I remove the NetworkManager.state pid file), and a "deactivating device (reason: 2)" line right after a "bringing up device" line in the daemon.log.
Any suggestions? Is there a bug in NM? Or should I look for some corrupted file remaining in my system after that crash?
EDIT:
After one dozen tries and much fidgetting and modifying things, I've got it working, but I don't know which has been the decisive move. I think one of these two:
-either modifying in my BIOS the settings for the wireless killswitch,
-or uninstalling the kdemod-networkmanagement-networkmanager-plasmoid (that I had installed along with kdemod-networkmanagement-knetworkmanager-kde4)
Last edited by humilleitor (2010-05-03 15:11:09)

Device not ready for access

Hello
With my new PT880 board and the also new harddrives and the new installed winxp I've this problem: Device\Harddisk1\D is not yet ready for access. Error 15
this message is in the systems protocol from win xp.
i've looked for a new driver for the via chipset but ther in only the one from 31.10.03. is it a driver problem?

affirm both HD's are formated and partitionated. i thik it's a trouble with the via s-ata/raid driver (or maybe chipset) because there is not realy a problem. i can use the pc normaly, but i wondered about all these entrys in the windows systems log file. and there are realy a lot of it.

MegaSky 580 - Presto! Error message "The device is not ready"

Error message "The device is not ready. Please check whether your device is connected correctly."
I can see the device in the drop down menu of the settings window, when I select It, I get again the same error message.
If I plug off the usb stick, presto! Do not see the device anymore
I did have this problem since the beginning, I did try a lot ,
I install also the updates for the “digital TV usb min receiver” and the updates for the presto software (from the presto and msi homepage).
But nothing was helping.
After a couple of weeks I needed to reinstall the laptop from scratch.
And the first thing that I did was trying the presto software again, and it was working everything fine.
After a couple of weeks I install some other stuff and all of the Microsoft patches,
And I did get the same problem back.
So it seems that something is disturbing the communication between the USB stick and the presto software, but what!
The usb stick is working finr, I did try it with a powercinema trial version, and it is working, but why the OEM software of the USB stick not working, I hate it!
It would also helpful, to get a kind of log functionalities, due to the fact,
that no logs are available! Maybe somebody knows kind of switch to increase the verbosity and get an error log?
I have seen the same problem in this and other forums, so I’m not the only one.
But no solution found, maybe someone has found it…..
System:
HP nc6120 laptop
XP SP2 all security patches installed

ilko_t
The Acer laptop, whic works with Mega Sky 580, is a celeron, can´t remember the exact spec., 1,5 Ghz, 1G DDR
Think my faulty computer is similar to the one (B) you described... is it a Dell thing?
Quote from: ilko_t on 20-June-06, 21:40:59
I am having the very same problem:
3 Systems:
A- Desktop MB-Abit AN7, AMD Athlon 3000+ - working fine with all software and drivers updates. All aviable XP updates applied. XP Pro SP2
B- Laptop Dell Dimension 6000, Intel Centrino, 1.6Ghz Mobile, 512MB DDR2- cannot get it working- tried all aviable updates, all XP updates applied, XP Home SP2, Intel Chipset drivers- newest, says every time "The device is not ready. Please check whether your device is connected correctly."
C- Desktop Intel P4 3.0Ghz, 512MB RAM, Intel chipset- was working first 2 or 3 reboots then the same problem "device not ready", all updates, all XP updates, all motherboard updates, XP Pro SP2
On systems B and C the tuner is recognised properly in Device Manager and correct drivers installed(the newest from MSI+software patch)
The only logical conclusion I can make at this point is that there is something to do with the chipset make, as it works just fine on AMD and on Intel it won't, using the same software+drivers.
Any other ideas? Or just dump the thing in the bin

Could not turn on Screen mirroring. The output device is not ready or does not support HDCP

i tried it on my tv sony bravia w700b with my new xperia z1
i didnt unlocked my bootloder or i didnt rooted my phone
dont know whats the problem is
'Could not turn on Screen mirroring. The output device is not ready or does not support HDCP'. can anybody able to tell how can I resolve this please?

Have you checked if your device does support HDCP? I looked at https://www.iezvu.com/ezcast.php?l=en but i'm afraid i can't find any detailed specification for it.
If you have unlocked your bootloader this may also be the cause for this issue.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Error while trying to create a Solr collection (java.io.IOException: The device is not ready)

Hello, everyone.
I'm trying to create a .cfm document that will erase a specific Solr collection and then re-create it, index it, and optimize it.
The delete works flawlessly.
Unfortunately, creating it isn't working, at all. I get the following message:
Unable to create collection publicsearch - An error occurred while creating the collection: java.io.IOException: The device is not ready.
This is a Windows 7 server running Apache and CFServer 9.0.1 (the version before Verity was cut.) I'm not getting any more details than the one error message. Any idea of what could be causing this? I've Googled this and I'm seeing a lot of issues similar, but not quite what I have happening.
Thanks,
^_^

Nevermind.. no one bothered to inform the developer that the path to the collection AND the path to the directory that the collection is for are different on this other server.
Fixed.

C4440 scan error Operation could not be completed (error 0x00000015). The device is not ready.

I have updated, restarted, etc. Sometimes when scanning I do not get this message, but more often I do.
When scanning I receive the following message:
Error message when scanning "Operation could not be completed (error 0x00000015). The device is not ready.
Please help!!

Hello, nylamama:
Follow the steps in this document, and you should find the help you need to resolve the error.
Let me know if this helps, and thank you for contacting HP!
Cheers,
SN_63 (Saint Nana): I work on behalf of HP.
Click the thumbs up icon if you want to say "Thank you." To help others on the forum, select "Accepted Solution" on the post that solves your problem.

Scanner Operation could not be completed (error 0x00000015). The device is not ready.

When trying to scan I keep receiving an error message. Operation could not be completed (error 0x00000015). The device is not ready.
What does this mean? I have been able to scan without problems in the pas, with Windows 7 Fax and Scan.
Printer : HP PhotoSmart 2710
Computer: HP Pavilion zd8000 (originally XP)

Welcome to the Forum, losblanco,
I checked on this for you and I think your answer is here:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/operation-could-not-be-completed...
If you don't find the solution there,
or if you need help for any other reason,
please come back and we'll take another shot at it!
Good Luck!
I hope this helps.
Click The Kudos Star to say Thanks!
Set in Reply “Accept as Solution” if it’s fixed!
Kudos are Earned!
Kind Regards,
Dragon-Fur

"ERROR 21 the device is not ready" when use dism get-wiminfo

I want to retrieve information about the OS images that are contained in a wim file.
"dism /Get-WimInfo /WimFile:d:\sources\install.wim "was typed in the command line (system manager)
but error 21 happened "the device is not ready". Actually I know little about computer and don't know how to fix it.
the log file says as follows,
2015-04-20 13:12:36, Info DISM PID=5204 TID=7720 Scratch directory set to 'C:\Users\luckiing\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2015-04-20 13:12:36, Info DISM PID=5204 TID=7720 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2015-04-20 13:12:36, Info DISM PID=5204 TID=7720 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Manager: PID=5204 TID=7720 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM.EXE:
2015-04-20 13:12:36, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2015-04-20 13:12:36, Info DISM DISM.EXE:
2015-04-20 13:12:36, Info DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=8
2015-04-20 13:12:36, Info DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
2015-04-20 13:12:36, Info DISM DISM.EXE: Executing command line: dism /Get-WimInfo /WimFile:d:\sources\install.wim
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2015-04-20 13:12:36, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2015-04-20 13:12:36, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2015-04-20 13:12:36, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2015-04-20 13:12:36, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2015-04-20 13:12:36, Info DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2015-04-20 13:12:36, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2015-04-20 13:12:36, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2015-04-20 13:12:36, Info DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2015-04-20 13:12:36, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2015-04-20 13:12:36, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Getting Provider WimManager - CDISMProviderStore::GetProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2015-04-20 13:12:36, Error DISM DISM WIM Provider: PID=5204 WIM open failed. - CWimImageInfoCollection::Initialize(hr:0x80070015)
2015-04-20 13:12:36, Error DISM DISM WIM Provider: PID=5204 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimageinfocollection.cpp:76 - CWimImageInfoCollection::CreateWimImageInfoCollection(hr:0x80070015)
2015-04-20 13:12:36, Error DISM DISM WIM Provider: PID=5204 TID=7720 Failed to create the image info collection. - CWimManager::GetImageInfoCollection(hr:0x80070015)
2015-04-20 13:12:36, Error DISM DISM WIM Provider: PID=5204 TID=7720 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:3248 - CWimManager::InternalOpGetImages(hr:0x80070015)
2015-04-20 13:12:36, Error DISM DISM WIM Provider: PID=5204 TID=7720 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:4043 - CWimManager::InternalCmdGetImages(hr:0x80070015)
2015-04-20 13:12:36, Error DISM DISM WIM Provider: PID=5204 TID=7720 Error executing command - CWimManager::InternalExecuteCmd(hr:0x80070015)
2015-04-20 13:12:36, Error DISM DISM WIM Provider: PID=5204 TID=7720 base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1928 - CWimManager::ExecuteCmdLine(hr:0x80070015)
2015-04-20 13:12:36, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2015-04-20 13:12:36, Info DISM DISM.EXE:
2015-04-20 13:12:36, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2015-04-20 13:12:36, Info DISM DISM.EXE:
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2015-04-20 13:12:36, Info DISM DISM Provider Store: PID=5204 TID=7720 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

Hi,
According to the DISMI log, it seems like there is a problem with the WIM file. However, you can try to change a location for test to check its information.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error initializing server: IO Error: The device is not ready

Hi, I copied JDev 10.1.3 on my notebook and when I tried to start embedded OC4J I get the following message:
Error initializing server: IO Error: The device is not ready
What should I do? Thanks

If I read correctly, you just copy the existing jdev installation on your PC to your notebook. That sounds like a very dubious practice to me. As seen by you in this particular example, hard-coded non-relative paths, host information, environment settings and etc begin to creep into various configuration or preference files once a piece of software go alive.
Any problem to start a new installation to your notebook?

HT3625 audio input device is not ready to use

My audio input device is not ready to use. Any idea? I have one macbook pro 13".
Thank you for your help.

MacBook Pro 13" Mid 2012. – And as the link you provided says, the products affected are all pre 2012. After that (or at least in my mac from mid 2012) there is no "'Use audio for:' menu selection" to choose anything from.
Message was edited by: Aarnipuu

Device not ready

Similar Messages

Maybe you are looking for