Device object not present,restart the system and run setup again????

i install window xp sp2 in my macbook,when i install driver by mac os cd,installation run until sigmatel,it show error,the my mbp will restart automatically,and the driver installion not complete!! i try to install sigmatel idt sound driver manually,when system update the hardware configuration,it show an error message
" device object not present,restart the system and run setup again"!!!! so i can not fully install bootcamp driver in window!
any can help??
macbook pro 13" 2010 mid

Hi:
Your notebook is not supported by HP for Windows XP.
Please read the XP downgrade guide at the link below for instructions on how to get your audio to work in XP.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The specific instructions for your model series can be found in the section titled 3. Difficult Models
Paul

Similar Messages

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

Device Object not present.....

I have a Dell computer. Each time I clean installed a new Win 10 TP build, I had to reinstall SigmaTel HD Audio.
I did that many times and it never failed, until today.
Today, I did a clean install of 9926 in a dual boot setup, and as expected I had no sound. So, I started to install sigmatel.
Near the end of the install, I got this error message.....Exit Error: Error=Device Object not present, restart the system and run setup again.
I restarted, it still failed to install. I gave up after the 4th restart. So, as of now, I have no sound.
Other than that, 9926 runs fine.
Anyone has an idea ?

Hi david,
From the error message, it seems Windows could not detect the Device object successfully.
How did the sound Device configure here?
Next time if this device still encounter issues, check it in Device Manager.
Edit: I marked your reply as closed.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

VISA: (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.

I had labview software running and talking to all instruments. added a agilent E4440a psa to the GPIB bus and now my code does not run. even when i build a vi from scratch it keeps giving me this error and no communication to equipment. any ideas what happened or how to fix it??
this is the Error code -1073807343 source VISA Open in Keithley 24XX.lvlib:Initialize.vi->Untitled 1 and the error explanationVISA: (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.
I opened MAX and can query all equipment.

That's quite alright. I didn't think it was offensive. Please see the screenshots attached.
Thanks a lot,
Pablo
Attachments:
DevMgr-Gral.JPG ‏175 KB
MAX-Gral.JPG ‏168 KB
MAX-PortStgs.JPG ‏138 KB

The source or target cluster ID is not present on the system!

Hi,
During System copy, we are facing issue "Run Java Migration Tool kit"
Phase of Sapinst.
I could found exact error messages sequences which may help you in
understanding the problem.:
==========================================
#Start preparing switch.
#The switch.properties could not be read. Reason: switch.properties (No
such file or directory)
The source or target cluster ID is not present on the system! The
current (source) cluster ID is 787075 and the new (target) cluster ID
is 3137675
==========================
Last error message might be quite familiar to you as this is very
common error message however just wanted to inform you that the "SAP
Note 966752 - Java system copy problems with the Java Migration
Toolkit" could not help me out.
all the possible entries have been updated and retried but no success.
Please suggest if you have face similar kind of problem.
Thanks.
Cheers !!!
Ashish

Hi,
cluster ID is just combination of below parameters:
In our case, my source system (ABC) was refreshed from another system (XYZ) recently
so while installing target system ( DEF), I changed the source system details from ABC to XYZ in below file and retried the
SAPinst screen. System copy has got completed successfully.
Open the file <installation directory>/jmt/cluster_id_switch.properties and edit the line
src.ci.sid=
src.ci.instance.number=
src.ci.instance.name=
src.ci.host=
If in your case source system is not refreshed recently; You may try with functional host name or OS host name etc. details for above parameters.
If this does not work check details of "SAP Note 966752 - Java system copy problems with the Java
Migration Toolkit" which says almost the same thing but I could not get that as the statements related to
box number are bit confusing and contradictory.
Cheers !!!
Ashish

I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

I try to down load itune again it keep tell me it is not compatable with the system and it does not delete the old virsion of itune , is there any idea how to solve that please?

What OS?

"Configuration changed. Restart the system" and then reboot on startup.

I have disabled WiMax in BIOS setup and now my x121e doesn't boot at all - just says that "Configuration changed. Restart the system" and reboots. When i press F1 to access bios setup - nothing happens. CMOS reset didn't help/

In service center they said that motherboard is glitchy and needs replacement.
So it was a hardware fault.

How can i use the shared object already present in the system from java.

explanation:
Actually there are shared objects present in the jdk which is used by java itself.I want to know if i can use the methods in any library file(shared object) which is already present in the system.
Or the question can be put this way how does the java call the native methods? (Can we do that explicitly) in our code.

It isn't entirely clear what you mean by 'shared' objects and what the relationship with these shared objects and calling native code is.
There are no shared objects in the Java language, only the java platform.
The platform system properties are exposed via the System class (java.lang package).
You are free to create your own shared objects by using static member access or some other mechanism.
Your access to methods in any of the API's is dictated by the access type you have, normally public being the only completely open access allowing complete visibility.
You can call native methods, thats what JNI is for. Calling native methods in classes other than your own is generally done using the API provided by the developer(s) of those classes.

Device Id not exists in the system list

device id is not exists in the SYSTEM
how do i add the device id to the system
previously, i have sync a few application and works fine,
yet , after i clean up merep_purge...the device id gone...
how to resolve this..

Hi yzme,
Hope your problem is resolved by now.
If not just like to mention following points and i am sure it will definitely answer all your queries.
1. Device ID gets generated only at the time of first time synchronisation with the MI server.
2. You can delete the device ID by running some function module or by uninstalling MI client.
3. but if you have deleted the device ID by mistake, you have to reinstall the application and after sync it will generate a new device ID.
4. When ever you deploy any new application it will generate a new mobile ID.
do not confuse the mobile ID with device ID. mobile ID is different for different application and user on same device.
Regards
Satya

Trying to communicate with HP54845A using IVIscope routines and getting error 0XBFFF0011 (Insufficient location information or the requested device or resource is not present in the system).

I am able to talk to the device using the MAX tool and also using Plug & Play VIs. The device is at address 7, so I'm using the string GPIB[0]::7::INSTR. I have downloaded the latest hp345xx dll (version 3.13)and have iviscope version 3.0.2.0 installed.
Thank you for the help.

Hello,
What version of the IVI Compliance package do you have? You can check this under the software tab in MAX. Also, see the attached screenshots for a sample assignment/configuration of a logical name and a driver session. Once you have gone through the analagous steps it should work, where your resource name control in LabVIEW should be populated with the logical name created in MAX.
Repost if this isn't successful!
JLS
Best,
JLS
Sixclear
Attachments:
IVI_Screenshots.zip ‏625 KB

Tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insufficient location information or the request device or resource is not present in the system

Dear Friends,
I am from Jesus Osorio from Tektronix Mexico. I have seen this error messages during the last instalations and I am wonder how could I solve it?
tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insuff...
I am using DPO4000 series, laptop with SE for Tektronix Edition and a USB cable. What should I do to solve this problem?
Regards,
Jesus Osorio
Jesus V. Osorio Lopez
AE

Dear Jesús,
You should check if you have on your PC or Laptop installed VISA. I recommend you this link to download it:
http://digital.ni.com/softlib.nsf/websearch/b1a7837fffd2826e8625729100689d3c
To have a better oportunity in having your issue solved, please contact us in Mexico at this toll free 01 800 010 0793. As well as if you post your following messages in the Spanish Forum, we will be able to help you faster.
Thanks for using National Instruments Forums.
NorSa
NI Applications Engineer Latin America
NorSa
NI Applications Engineer Latin America
Para Soporte entra aquí

When plug my ipod into computer and open Itune, my device does not show on the screen and so can not open it to transfer/sync/.... Used to show as soon as I plugged in?!

Today, try to update, sync.... my ipod. When plugged it into my computer and opened Itune, my device never shown on the left side of the screen as it used to! Can not find it anywhere????? Could you give me a tip on this matter.

Hi there atangney,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

My iMac updates at startup with the logo then once it's done it shuts down. So I restart it and it just restarts the update and shuts down again. Any one know why?

So I don't know why my iMac is doing this. It's a late 2009 model I believe. I was literally working perfectly fine a few minutes before this. I decided to reboot my Mac and this update started and I can't seem to get out of it. And I've rebooted several times and this update never seems to finish.
The most recent update as I usually update when the new ones come out..
None the less does anyone know why this is happening?

Okay. So the third or forth time resetting all those things didn't work. So I started up in safe mode. And currently it's spinning with a circle with the cross logo.
I have it running off an external hard drive. I think it's due to to that nhence the logo.
So I'll just let it sit he unless there's a way you know to make it pick up right away.

Exchange 2010 SP3 /PrepareAD failing; "A reboot from a previous installation is pending. Please restart the system..." error

I am attempting to prepare our Exchange 2010 Server (RTM) for an upgrade to SP3.
When attempting to run "setup.com /PrepareAD" to prep the AD schema, the command fails and I receive the following error in the ExchangeSetup log:
[12/19/2013 21:50:48.0650] [1] Beginning processing Get-OrganizationConfig
[12/19/2013 21:50:48.0665] [1] Searching objects of type "OrganizationConfig" with filter "$null", scope "SubTree" under the root "$null".
[12/19/2013 21:50:48.0806] [1] Previous operation run on domain controller 'DC1.company.com'.
[12/19/2013 21:50:48.0806] [1] Preparing to output objects. The maximum size of the result set is "unlimited".
[12/19/2013 21:50:49.0945] [1] Ending processing Get-OrganizationConfig
[12/19/2013 21:51:42.0753] [1] [REQUIRED] A reboot from a previous installation is pending. Please restart the system and rerun setup.
[12/19/2013 21:51:43.0190] [1] Ending processing test-setuphealth
[12/19/2013 21:51:43.0221] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[12/19/2013 21:51:43.0283] [0] End of Setup
I am receiving this error when attempting to run "setup.com /PrepareAD" from either of our two GCs and I get the same error from both GCs, so the issue doesn't appear to be related to the individual servers.
What should I be checking, to clear this error so the AD schema update can be performed?
Environment
Exchange: Exchange Server 2010 RTM
Server: Windows 2008 R2 (fully patched)
Domain and Forest functionality: Windows 2008 R2 native

One follow up:
If I go into regedit, I see that under HKLM\System\CurrentControlSet\Control\Session Manager there is an entry from when I recent installed Google Chrome.
The entry looks like:
MultiString: PendingFileRenameOperation
Value Data: \??\C:\Program FIles (x86)\Google\Chrome
Is this "pending rename" what's causing SP3 to refuse to install, because it thinks the OS install state isn't 'clean'?

The battery installed is not supported by this system and will not charge. Lenovo X220i.

Hi All, I bought a re-furbished Lenovo X220i and decided to buy an extra genuine Lenovo battery which is brand new (New Old Stock maybe?) from a dealer. Battery Details: P/N OA36283 on the Box. P/N 42T4861 on the battery. According to the Lenovo documentation, this battery part number should be compatible to Lenovo X220i. However, when I insert the battery in, it comes up with a message that the battery is not supported by the system and will not charge. The battery comes up with zero (0%) charge. I installed the latest driver I can find and still comes up the same. Can anybody shed some light on this please? Thanks.

Hi
can you provide the photo of the labels on the battery surface (with quality the symbols legible)? Also, if OS is win7 and Lenovo Power Manager application is installed, it's very helpful to add information PM in the Advinced mode from the Battery tab.
There is a big chance the battery is faked.

Device object not present,restart the system and run setup again????

Similar Messages

Maybe you are looking for