Device or Device Name already in use?

After installing the latest PC Suite over an old version I notice when I connect my 6300, 6288 or N74 {any phone!} via USB the message in the subject line pops up and as a result I am only able to connect as a storage device not via the PC Suite.
After many exhaustive methods of uninstalling and installing I found a way.
First uninstall every thing to do with Nokia via the usual way {note if when clicking on the uninstall feature you only get the installer package like I did then you would need a third party uninstaller like Advanced Uninstaller 2007 or similar. the drag and drop feature of just the Nokia desktop icon is all thats required to uninstall}
Remove the program file directory "nokia"
Do a system back up before proceding. start/programs/accesories/system restore/backup.After you have done the backup Then click start/run/{type}regedit/{ensure the tree is collapsed}/edit/find/{type}nokia/{ensure keys,values and data boxes are checked}/{click}find next/
delete found key/to continue press f3 and do the same it will take some time about an hour. then do the same again but type in pc suite instead of nokia, when all done reboot and do again, also a good idea would be to use a 3 party reg clean tool to polish the job, I found "Registry Checkup" to be very good without being to much of a cleaner that it gives you trouble. I found with this it was able to remove 77 empty keys. reboot again and the pc suite install went very well and connectivity wasn't a problem {note when using regedit you will need administrator rights to remove some keys/values}
Regards TonyMessage Edited by buster1957 on 05-Sep-200703:04 AM
Buster1957

When I click on Go to Option, page is not open.
I have the same problem with my nokia N73 (V 4.0736.3.2.1) (RM-133) (Z5.01).
When I attach My phone with pc via usb, window shows
'Found New Hardware' - 'Nokia N73'
then - 'Nokia N73 USB Phone Parent' then
Found New Hardware Wizard opens
and it shows :- Cannot Install this Hardware
There was a problem installing this hardware:
Nokia N73 (or sometimes It shows Generic Phone)
An error occurred during the installation of the device
The name is already in use as either a service name or a service display name.
PLEASE SOLVE MY PROBLEM. THANK YOU

Similar Messages

  • Device name already exists changed to

    A couple of months back I upgraded my SLES 10sp1 servers to SLES 10sp2 using ZLM. My ZLM server is running SLES 11 and version 7.3 of ZLM. My SLES 10sp2 servers are running the ZLM 7.3 client. When I look in ZCC under the Hot List it shows my main ZLM 7.3 SLES 11 server with a warning status for almost all my hosts. When I click on that to see what is going on the Event log states: Device name already existed, changed to MYSLES10HOSTNAME while attempting to register host: MYSLES10HOSTNAME I clear all these events and later on they are back. Sometimes the same ones sometimes others. I currently maintain about 200 servers using ZLM and the Event log has 44 devices with this message. What setting do I need to change or delete? Or better yet what do I need to do to correct this behavior?
    Thanks!

    This happens normally when you register one host against the zlm server, stop zmd, delete the deviceid and secret file, start zmd and register it again against the zlm server without deleting the existing device in the zlm web interface.
    What happens at this time is that the zlm client registers with the deviceid and the secret against the zlm server. In the web interface you see the hostname of it. If you open the details, you see the guid of the host which equals the deviceid.
    When the zlm client communicates with the zlm server it uses the deviceid and the secret to login and query the bundles, catalogs and policies assigned to it.
    So now when the zlm client is stopped, the files deleted, the zlm recreates them the next time it is started. After registering against the zlm server, it tries to login with the new deviceid and the new secret. There is already such a host entry, therefor it renames one and register with the new values again.
    Do you have maybe a cron job or something that deletes those files and restarts the zlm client ?
    Rainer

  • Audio Stream Recorder - Error: Audio device is already being used by another prog

    I realized that Audio Stream Recorder is does not "work" through server list feature. So I am simply trying to use the manual method of adding URL's to the interface. However regardless of the type of stream, shoutcast, windows media or real audio, I receive the error "audio device is already being used by another program". Does anyone know how to fix this? I have closed my audio application etc to no avail. <RANT WARNING> I was very excited about using this application when I read about it. However an application that provides none of the stated features is not an application, its false advertising, since it clearly states on the box, help files and website this products "features". Anyway, it'ss very disappointing. Also, does anyone know what the supported steaming formats are, the help file say the application requires RealONE and Windows Media Player but does not mention audio stream formats? Thanks you in advance for any help.

    I have the same issue. I updated to the latest software, to no avail. My first suspicion is that some Microsoft patch caused this, but I cannot verify this.
    Apparently no one at Creative is very interested in this issue.

  • Error 633: The modem (or other connecting device) is already in use or is not configured properly.

    Hi all,
    I recently got that a new USB CDMA modem which works fine on Windows 7 system but when I try connecting to my other laptop which runs on Windows 8.1, it keeps giving the error:
    Error 633: The modem (or other connecting device) is already in use or is not configured properly. I've most of the links and solutions shared but none seems to work. I've generated diagnostic logs which are as follows. I interpreted some and most probably
    it seems like an issue of incompatible driver, but does anyone else sees any issues in these diagnostic logs. Looking forward to your suggestions.
    [4724] 06-01 20:01:56:314: ENTRY: Reading "Reliance Netconnect+"
    [4724] 06-01 20:01:56:315:
    Before LoadPortsList2 in ReadEntryList()
    [4724] 06-01 20:01:56:315: LoadPortsList2
    [4724] 06-01 20:01:56:315: GetRasPorts
    [4724] 06-01 20:01:56:315: RasPortEnum...
    [4724] 06-01 20:01:56:315: RasPortEnum=603,c=10
    [4724] 06-01 20:01:56:315: RasPortEnum...
    [4724] 06-01 20:01:56:315: RasPortEnum=0,c=10
    [4724] 06-01 20:01:56:315: RasGetDevConfig
    [4724] 06-01 20:01:56:316: RasGetDevConfig=603
    [4724] 06-01 20:01:56:316: RasGetDevConfig
    [4724] 06-01 20:01:56:316: RasGetDevConfig=0
    [4724] 06-01 20:01:56:316: SanitizeUnimodemBlob: mdm prot=0
    [4724] 06-01 20:01:56:316: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
    [4724] 06-01 20:01:56:316: StringCchCopy failed due to error 0x8007007a
    [4724] 06-01 20:01:56:317: LoadPortsList=0
    [4724] 06-01 20:01:56:317: successfully finished LoadPortsList2 in ReadEntryList()
    [4724] 06-01 20:01:56:317: Reading media group "serial"
    [4724] 06-01 20:01:56:317: New link format
    [4724] 06-01 20:01:56:317:
    DUPTEST:Port in this media
    [4724] 06-01 20:01:56:317: Port=COM17
    [4724] 06-01 20:01:56:317:
    Trying to match the phonebook port in the system ports
    [4724] 06-01 20:01:56:318: Port configured
    [4724] 06-01 20:01:56:318: SetDefaultModemSettings(bps=921600)=1
    [4724] 06-01 20:01:56:318: Reading device group "modem"
    [4724] 06-01 20:01:56:318: Device List after deleting dupe
    [4724] 06-01 20:01:56:318: StringCchCopy failed due to error 0x8007007a
    [4724] 06-01 20:01:56:318: Fix entry type, 0 to 1
    [4724] 06-01 20:01:56:318: Device List after deleting dupe
    [4724] 06-01 20:01:56:318: ReadRasFile: ReadEntryList returned 0
    [4724] 06-01 20:01:56:318: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
    [4724] 06-01 20:01:56:318: ReadPhonebookFile returns 0
    [4724] 06-01 20:01:56:318: RasGetAutodialAddressW
    [4724] 06-01 20:01:56:318: RasGetAutodialAddressW
    [4724] 06-01 20:01:56:318: DwEnumEntryDetails done. 0
    [4724] 06-01 20:01:56:318: RasGetEntryPropertiesW
    [4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:56:318: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:56:318: GetPbkAndEntryName
    [4724] 06-01 20:01:56:318: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
    [4724] 06-01 20:01:56:318: IsPublicPhonebook=0
    [4724] 06-01 20:01:56:318: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:56:318: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:56:318:  IsVirtualizationNeeded: return value = 0
    [4724] 06-01 20:01:56:319: ENTRY: Reading "Reliance Netconnect+"
    [4724] 06-01 20:01:56:319:
    Before LoadPortsList2 in ReadEntryList()
    [4724] 06-01 20:01:56:319: LoadPortsList2
    [4724] 06-01 20:01:56:319: GetRasPorts
    [4724] 06-01 20:01:56:319: RasPortEnum...
    [4724] 06-01 20:01:56:319: RasPortEnum=603,c=10
    [4724] 06-01 20:01:56:319: RasPortEnum...
    [4724] 06-01 20:01:56:319: RasPortEnum=0,c=10
    [4724] 06-01 20:01:56:319: RasGetDevConfig
    [4724] 06-01 20:01:56:320: RasGetDevConfig=603
    [4724] 06-01 20:01:56:320: RasGetDevConfig
    [4724] 06-01 20:01:56:320: RasGetDevConfig=0
    [4724] 06-01 20:01:56:320: SanitizeUnimodemBlob: mdm prot=0
    [4724] 06-01 20:01:56:320: Port=COM17,fHw=0,fEc=0,bps=921600,fSp=0,prot=0
    [4724] 06-01 20:01:56:320: StringCchCopy failed due to error 0x8007007a
    [4724] 06-01 20:01:56:322: LoadPortsList=0
    [4724] 06-01 20:01:56:322: successfully finished LoadPortsList2 in ReadEntryList()
    [4724] 06-01 20:01:56:322: Reading media group "serial"
    [4724] 06-01 20:01:56:322: New link format
    [4724] 06-01 20:01:56:322:
    DUPTEST:Port in this media
    [4724] 06-01 20:01:56:322: Port=COM17
    [4724] 06-01 20:01:56:322:
    Trying to match the phonebook port in the system ports
    [4724] 06-01 20:01:56:322: Port configured
    [4724] 06-01 20:01:56:322: SetDefaultModemSettings(bps=921600)=1
    [4724] 06-01 20:01:56:322: Reading device group "modem"
    [4724] 06-01 20:01:56:322: Device List after deleting dupe
    [4724] 06-01 20:01:56:322: StringCchCopy failed due to error 0x8007007a
    [4724] 06-01 20:01:56:322: Fix entry type, 0 to 1
    [4724] 06-01 20:01:56:322: Device List after deleting dupe
    [4724] 06-01 20:01:56:322: ReadRasFile: ReadEntryList returned 0
    [4724] 06-01 20:01:56:322: RASSQM: In ReadPhonebookFile Number of myuse profiles set 1
    [4724] 06-01 20:01:56:322: ReadPhonebookFile returns 0
    [4724] 06-01 20:01:56:322: DuplicatePhoneNode
    [4724] 06-01 20:01:56:322: GetPbkAndEntryName. rc=0x0
    [4724] 06-01 20:01:56:322: GetInstalledProtocolsEx=0xc.
    [4724] 06-01 20:01:57:690: DwEnumEntryDetails
    [4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:57:690: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:57:690: ReadPhonebookFileEx: called for pbk C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
    [4724] 06-01 20:01:57:690: IsPublicPhonebook=1
    [4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:690:  IsVirtualizationNeeded: return value = 1
    [4724] 06-01 20:01:57:690: GetLUAPhonebookPath: Return value 0 hiddenpbk path C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\_hiddenPbk\rasphone.pbk
    [4724] 06-01 20:01:57:690: ReadRasFile: ReadEntryList returned 0
    [4724] 06-01 20:01:57:690: SyncMasterPhonebookFile:++
    [4724] 06-01 20:01:57:690: IsPublicPhonebook=1
    [4724] 06-01 20:01:57:690: path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:690: full path=C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:690: FindFirstFile failed with 0x2
    [4724] 06-01 20:01:57:690: ReadRasFile: File C:\ProgramData\Microsoft\Network\Connections\Pbk\rasphone.pbk does not exist
    [4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile ++
    [4724] 06-01 20:01:57:690: WritePhonebookFile
    [4724] 06-01 20:01:57:690: ModifyEntryList: Number of connections written 0
    [4724] 06-01 20:01:57:690: RASSQM: In WritePhonebookFile Number of alluser profiles set 0
    [4724] 06-01 20:01:57:690: DeleteEntriesOnlyInHiddenPhonebookFile : WritePhonebookFile failed with 0
    [4724] 06-01 20:01:57:690: RASSQM: In ReadPhonebookFile Number of alluser profiles set 0
    [4724] 06-01 20:01:57:690: ReadPhonebookFile returns 0
    [4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:57:691: IsRasmanServiceRunning=1
    [4724] 06-01 20:01:57:691: ReadPhonebookFileEx: called for pbk C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk, flags 8
    [4724] 06-01 20:01:57:691: IsPublicPhonebook=0
    [4724] 06-01 20:01:57:691: path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:691: full path=C:\Users\lavi\AppData\Roaming\Microsoft\Network\Connections\Pbk\rasphone.pbk
    [4724] 06-01 20:01:57:691:  IsVirtualizationNeeded: return value = 0

    Hi,
    We could get more information about your problem through this log. While, for your problem, first of all, it would be better to contact USB Modem manufacture to confirm its compatibility with Windows edition.
    After that, make sure its driver was upgraded to be latest.
    Roger Lu
    TechNet Community Support

  • Sun would like your help with the "System Name Already In Use"  error

    A couple of users have reported getting an erroneous "System Name Already in Use" error when re-registering a system after a fresh Solaris re-install. We'd like your help in tracking down this problem.
    The scenario is this:
    * Install Solaris 10 and register with updatemanager,
    * Wipe out the installation and re-install Solaris.
    * re-register with updatemanager.
    The system erroneously reports that the system name is already in use. It is supposed to detect a duplicate registration of the same system.
    We have not been able to reproduce this error in our lab.
    If this has happened to you, would you let us know at [email protected]?
    Here are the things that we would like to ask of you:
    * If you run "updatemanager -debug" if will create a log file /tmp/basicreg<timestamp>.log.
    * Details on the exact hardware you have (make/model/configuration).
    * Details on the steps you took to get to the bad state. REALLY detailed!
    Thanks!
    Based on what we know now, we believe you can work around the issue by either:
    * Changing the host name and re-registering.
    * Creating a different user account and registering the host to that account.
    Some previously-posted workarounds are known NOT to work:
    * Wait 24 hours and try again.
    * Do some "ccr" incantations and try again.

    Hi,
    Can you drop me an email as i am a sun employee and i will be able to check if the swup frontline team have received any support cases on this issue and then we can work with you directly to resolve the issue.
    Scott Wallace

  • Error occurred in deployment step 'Add Solution': The definition specifies a claim provider with a name already in use.

    Hi,
    When i am trying to deploy sharepoint 2010 application in VS 2010, i am getting the below error:
    "Error occurred in deployment step 'Add Solution': The definition specifies a claim provider with a name already in use."
    How to fix this?
    Thank you

    You can use:
    $provider = Get-SPClaimProvider | where {$_.DisplayName -eq "Provider DisplayName"}
    $mgr = Get-SPClaimProviderManager
    $mgr.ClaimProviders.Remove($prov)
    $mgr.Update()
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • After IOS6 upgrade game centre says my nick name already in use. has reset some games back to beginning, how do i fix

    After IOS6 upgrade game centre says my nick name already in use. has reset some games back to beginning, how do i fix

    I've had almost every issue you've had.  Finally on Friday the screen blacked out.  It was obviously still charged, since I could hear the message ring, but when I tried to light up the display it didn't light so I was unable to get to it unless I removed the battery.  Then, as soon as the display timed out, I couldn't get it lit up again without removing battery.  I had the same slow movements throughout the display as well as slow text messaging.  Every issue you had other than the alarm clock (that always worked well).
    I took it in yesterday and, after over an hour spent there with a 'professional', I still had no answers.  He told me to come home and copy everything from my sd card to my computer, then re-format my card.  Well, my phone didn't even recognize that I had an sd card installed!!  Nor did my computer! 
    So then I got to experimenting...I removed the card and viola!!!!!!  The phone worked GREAT!  It's never worked so fast!  I then installed my husbands sd card to see if it was my phone's card reader or my card.  Turns out that the phone still worked great with his card installed and it did recognize his card in my phone.  So, my conclusion is that I need a new card.  I couldn't believe the difference in speed of everything!  It's like a brand new phone! 
    As for the hard reset...I did that over the weekend, before I could get to a verizon store.  It didn't work at all.
    I'd say, do the same thing I did and see if that works.  Can't hurt!!!  Please keep me posted.  I'd like to see what you find out 
    Good Luck!!!!

  • Local host name already in use

    I routinely get a message saying "local host name is already in use on this network. The name has ben changed to...."

    Is this a home network or a workplace network?
    If you open up terminal.
    Go to Applications> Utilities> Terminal and type in hostname
    what comes up?

  • Name already in use

    Frequently, after waking from sleep, my imac (3.2 ghz intel core 3, 4 gb RAM, OSX Lion 10.7.4) tells me that the (host name) is already in use, and a new name has been assigned.  I find a number of posts on this topic from 2009 - 2010, related to Leopard users, but nothing recent.  Any help on this problem?

    If you already power cycled the modem, then log into the modem and manually delete the dns entry for that machine.  Your configuration might be holding onto that machine name for some odd reason.

  • Initialization Error when starting an OS9 app. Network name already in use.

    Just this morning when opening an application that I've been working with over a week, I got an Initialization Error stating that the computer's network name is already in use and startup cannot continue. I renamed the computer in both OS9 and OSX and restarted the computer. I get the same error message. Can anyone advise me on some tricks to try?

    Hi,
    Can you drop me an email as i am a sun employee and i will be able to check if the swup frontline team have received any support cases on this issue and then we can work with you directly to resolve the issue.
    Scott Wallace

  • Cannot Update App-V 5.0 SP3 DB Server 'the specified name already in use'

    We planned to update our App-V  server from App-V 5.0 SP1 to App-V 5.0 SP3
    2 Servers (Both are Management Servers and Publishing Servers) with a remote SQL (2008 R2)
    we verified that all the registry keys exists according to the the
    Technet Document
    when we ran the setup file on the server we chose to install all of the roles and we got to the error:
    the specified name is already in use. you must provide a unique name database name
    The DB is already exist! we just want to update it to SP3 as well...
    So we installed all the roles but Management Server DB and the installation completed successfully,
    but now we still have a problem as the server can't connect to the DB (probably because it hasn't been updated)
    now we get this error:
    there were problems interacting with the database on the server. The error was: Invalid culomn name 'PackageOptional'.
    Invalid culomn name 'VersionOptional'
    we ran the setup with a domain admin that has full admin priviledges either on the App-V Servers and the SQL.
    we can't run the setup.exe on the SQL Server itself as it hosts many other DBs and doesn't have .Net Framework 4.5.1... besides the fact the DBAs don't really want to do it.
    we tried to backup the DB, attach it on a local SQL (under the App-V Server) , changed the registry keys to direct to the local DB and we got the same errors when we tried to run the upgrade!
    how come the documentation doesn't have anything about updating the DB?
    another question I couldn't figure out. can I use App-V Server 5.0 SP3 with App-V Client 5.0 SP2 HF4?
    anyway - please help!
    thanks!!
    Tamir Levy

    One more thing, I know how to expand the DB Scripts and run them manually on the SQL Server,
    but from my understanding, it is only to create new DBs and not to update the DB Tables...
    anyhow, I don't think the DB update should be such a complex and unfriendly method, especially when I took the DB and put it on a local SQL! this should be updated with a simple "Next , Next" Setup...
    Thanks
    Tamir Levy
    At the current time, there is some contradictory information available on technet.  On one side, the Planning for High Availability document describes how
    to extract the database scripts and run them against a SQL host so you don't have to run the EXE directly on the SQL host (yes, this does upgrade the tables too, not just create new ones, apparently the order to execute them is wrong).  On the other side,
    the App-V 5.0 SP3 Support Configurations indicates that any installation where you do not run the EXE on the SQL server is unsupported.
    As an enterprise customer who has SQL in a failover cluster, this confuses me.  I cannot run the installer on the SQL server (like you, and many other enterprise customers).  And even if I could, it doesn't mean the database would exist on the
    SQL server that it was run against, as the database can failover and nodes could be rebuilt!
    In regards to versions, when I said SP2 it was actually SP1.  You are correct, there were no server upgrades for SP2.
    Please be aware, I did not get the instructions to edit the database from Microsoft.  I provided them the steps I performed to get the application to work and I'm sharing them.  I am still waiting to hear back from them to see if this will be a
    supported path or not.  The setup was written to be executed directly on the SQL box, which is an unrealistic expectation for enterprise customers.  Even previous versions had to be extracted and applied via SQL scripts!
    The command above, from Alan, is part of the database scripts.  If you extract the scripts using /layout and /layoutdir (as described in Planning for High Availability),
    you will see a script called UpdateTables.sql.  This is a part of the script, not the whole thing.  There is more logic in this script that is required to get your publishing server up and running:
    It deletes all the daat from SchemaVersion then inserts a value of 2 into it.  If this doesn't happen, you'll get weird errors when trying to receive publishing information.
    If you can wait a few days for the upgrade, I would recommend that.  I expect some more documentation from Microsoft to come out and clear some of this up.

  • Keep getting error message about my computers local host name already in use

    I keep getting the following random error message popping up on my desktop. The last time it said the same thing, but imac-2.local? Haven't changed anything to my knowledge.
    This computer’s local hostname “glen-cumbuss-imac-2.local” is already in use on this network. The name has been changed to “XXXXX-XXXXXXX-imac-3.local”.

    Sometimes this message means that you have two simultaneous connections to the same local network: probably Ethernet and Wi-Fi. Disconnect the Ethernet cable or turn off Wi-Fi.
    If that's not the issue, shut down any virtual machines (Parallels, VMware, or VirtualBox) that are running.
    Sometimes there's no identifiable reason for the behavior.
    Rename the computer in the Sharing preference pane.

  • JNDI name already in use

    hi ,
    I have a problem when deploying my cmp bean.
    It says the jndi name is alreay in use and wants me to specify a different name in weblogic-ejb.jar.
    But I have no other resource being referenced by aJNDI name
    Can u tell me remedy for this
    plz

    hi this is my weblogic-ejb.jar,containing jndi name
    <?xml version="1.0"?>
    <!DOCTYPE weblogic-ejb-jar PUBLIC
    "-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN"
    "http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd" >
    <weblogic-ejb-jar>
    <weblogic-enterprise-bean>
    <ejb-name>CabinBean</ejb-name>
    <entity-descriptor>
    <persistence>
         <persistence-use>
         <type-identifier>WebLogic_CMP_RDBMS</type-identifier>
         <type-version>6.0</type-version>
         <type-storage>META-INF/weblogic-cmp-rdbms-jar.xml</type-storage>
         </persistence-use>
    </persistence>
    </entity-descriptor>
    <jndi-name>CabinBean</jndi-name>
    </weblogic-enterprise-bean>
    <security-role-assignment>
    <role-name>everyone</role-name>
    <principal-name>everyone</principal-name>
    </security-role-assignment>
    </weblogic-ejb-jar>
    The weblogic-cmp-rdbms-jar.xml containing the datatsource name:
    <?xml version="1.0"?>
    <!DOCTYPE weblogic-rdbms-jar PUBLIC
    '-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB RDBMS Persistence//EN'
    'http://www.bea.com/servers/wls810/dtd/weblogic-rdbms20-persistence-810.dtd'>
    <weblogic-rdbms-jar>
         <weblogic-rdbms-bean>
              <ejb-name>CabinBean</ejb-name>
              <data-source-name>Cabin</data-source-name>
              <table-map>
                   <table-name>Cabin</table-name>
                   <field-map>
                        <cmp-field>id</cmp-field>
                        <dbms-column>id</dbms-column>
                   </field-map>
                   <field-map>
                        <cmp-field>name</cmp-field>
                        <dbms-column>name</dbms-column>
                   </field-map>
                   <field-map>
                        <cmp-field>deckLevel</cmp-field>
                        <dbms-column>deckLevel</dbms-column>
                   </field-map>
                   <field-map>
                        <cmp-field>ship</cmp-field>
                        <dbms-column>ship</dbms-column>
                   </field-map>     
                   <field-map>
                        <cmp-field>bedCount</cmp-field>
                        <dbms-column>bedCount</dbms-column>
                   </field-map>
              </table-map>     
         </weblogic-rdbms-bean>
         <create-default-dbms-tables>DropAndCreateAlways</create-default-dbms-tables>
    </weblogic-rdbms-jar>     
    I created a new domin and tried to deploy but it was giving the same error
    where to work on now
    kindly help me

  • Change Android Device Name Using RD client - Is it possible?

    Hello guys, i am having a problem.
    I configured my RDC on windows server just fine, i can acess it through ddns.net without any problems.
    However, i have some software installed on my windows server that only works with pre-authorized PC-NAME ... so my question is, where or how can i change my android device name whenever i use the RDC app?
    Whenever i try to start that software i get the message "unable to open program ... D5803_4.4.4 not authorized to open it"
    (D5803_4.4.4 is my android device name) ... how can i change this?
    thanks!

    Hi,
    It seems there is no such way to change the RDP client name. 
    Thanks for your understanding!
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Dolby Digital Live : Device already in use, how to enable i

    Hello,
    I bought Dolby Digital Live yesterday, installed it and activated it on my X-Fi Platinum, but I have a problem. All my drivers are updated, but whenever I try to activate DDL in the Volume Panel or Audio Console, it says that the SPDIF device is already in use.
    I tried ending most processes, but the problem is the same, it seems that something is internally using my SPDIF output so that DDL can't be activated. (I'm using Vista Business 32 bits).
    It's also impossible to test tones on the SPDIF output as Windows also says it's already in use, that's weird.
    Anyone knows how to fix this
    Thanks.

    Ok it worked, thank you ^^
    This is what I did (complete reinstall of Creative suite was not needed) :
    - Uninstalled Creative X-Fi through Device Manager (right click on it, then Uninstall and Delete driver option), without rebooting
    - Refreshed modifications in Device manager and said "No" to search drivers for multimedia device
    - Installed latest X-Fi drivers without rebooting
    - Activated Dolby Digital Li've with a right click on the Volume Panel tray icon
    - Rebooted?as the sound was only stereo + echo, and now it works perfectly
    Concerning DDL, yes, it's only 5., and Creative plans to "give" DTS Connect the same way they did for DDL for old X-Fi.

Maybe you are looking for