Device platform not detected in SCC

Hello experts ,
I am developing an application on iPhone using sybase unwired platform .
As mentioned on sybase website i am at a point where one has to register the device on sybase control center .
i have imported required library files in my project .
when i try to register using same settings on simulator & on SCC , device platform is not getting detected
When i run my application using xcode it shows me online for my simulator but the device platform is not getting detected .
Also MBS status is "Registration Initiated" .
Tried multiple times but not working .
Any kind of help would be appreciated .
Thanks & Regards ,
Rockky .

Downloads the Windows 7 Hotkey Features. This will enable the wireless console with Fn+F5. Then you can enable bluetooth from there. Windows's built-in bluetooth drivers should work fine, maybe even with an update from WU if you're lucky.
-tm
Edit: Don't forget to download the System Interface Driver too.

Similar Messages

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

Bluetooth device is not detected during installation of bluetooth driver

Hi , Initialy bluetooth was working properly, Few day ago I saw that there was no bluetooth icon in system trayas well as in list device manager. So I uninstalled the driver and try to install. But during installation it showthat bluetooth device in not detected and it exit.

Downloads the Windows 7 Hotkey Features. This will enable the wireless console with Fn+F5. Then you can enable bluetooth from there. Windows's built-in bluetooth drivers should work fine, maybe even with an update from WU if you're lucky.
-tm
Edit: Don't forget to download the System Interface Driver too.

My problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.Help me please! greetings thanks!

Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
Help me please! greetings thanks!

Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
If you have some different page, try the quick fix in Fred McD's reply.
If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

Satellite L855-14G - Devices are not detected in device manager

I've reinstalled my Satellite L855/L855D (installed windows 7 instead of win 8) . And there is a problem : many devices are not found , like ethernet / wireless. Video card Radeon HD 7670M also not found. I can't install drivers, the errors apears that my hardware isn't suitable with software (e.g chipset). On toshiba's website i typed my satellite's serial number, but my computer isn't found. Whats wrong with this laptop ?
Same problem here: [http://www.tomshardware.co.uk/forum/386506-33-devices-detected-device-manager-format-win7]
What should i do ? i've tried lots of drivers , but no one works. Please , give me advice. Thank you.
Toshiba Satellite L855-14G (Toshiba EUROPE GMBH)
Part. No. PSKFWE-00H00FG3
Intel (R) i5 3210M
AMD Radeon HD 7670M
4GB RAM DDR3
Windows 7 Ultimate 64bit

I've entered my satellite's specs on that website and installed chipset utility from that website. But when installion beggins, in description is written , that this version chipset utility (9.3.0.1020) supports i7 proccesors (Target Chipset#: Intel(R) 7 Series/C216 Chipset Family). Is this chipset utility suitable with my Intel i5 3210M proccesor ? One more i've tried Display drivers, but setup isn't starting.

HT4972 i have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not detect to my computer? what can i do? please help me..

have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not be detect to my computer? what can i do? please help me..

You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1.

USB Audio Device sometimes not detected. udev, maybe?

I am using an external usb audio device which I usually keep plugged into my machine. I am finding that this device is sometimes not being detected when I boot the computer.
When this happens, issuing the following command:
$ aplay -L
does not list this particular device. Plugging and unplugging the device does not seem to help.
What does seem to resolve the problem is unloading and then reloading the snd_sub_audio kernel module. This is done by issuing the following commands:
# rmmod snd_usb_audio
# modprobe snd_usb_audio
Could anyone give some insight as to why the usb audio device isn't being detected and why this only happen occasionally? Could this be a udev issue? The device in question is an M-Audio Fast Track Pro.

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

The audio device supported by this device was not detect

Ok, i'm having massi've problems with this card, i think it just hates me. I'm running Windows XP SP3 Home, SB Audigy 2 ZS Platinum and it's not going too well. I have had it installed for a year now, Had to put up with EAX Console giving me a mediasource Error. Sound Mixer worked at this point. Then i decide to reinstall it, deleting all traces of it (installshield files too), i disabled my onboard sound (i had no idea it was enabled) called AC97 Audio or something in the bios. I restart and re-install. All seemed fine, until i double click the Creative Volume control and find the Error you see in the title now. I have a look on Sound and Audio Devices on Control Panel and it says 'No device found' on the first panel. On Recording and Audio the first 2 boxes are grayed out, but the Midi one has SB Audigy [0B00] or something similar. It's been plaguing me ever since i got it. Every application except diagnostics tool gives me the Error in the title. Also, instead of the classic Ping that windows gives through my speakers, i get a beep from inside my computer. It won't let me press the play button on the Sounds section of sounds and audio devices. I would deeply appreciate any help. Thanks
Any other info you need to know, just post here.
Heigou
UPDATE: I ran dxdiag and the sound section tells me that a sound card wasn't detected.
UPDATE: I changed PCI Slot, still same problem.
Message Edited by Heigou on 09-07-2008 2:03 PM

http://img28.picoodle.com/data/img28/3/9/7/f_m_7f7532.jpg
http://img28.picoodle.com/data/img28/3/9/7/f_2m_e458be.jpg
http://img29.picoodle.com/data/img29/3/9/7/f_3m_82d42f.jpg
?The Line-in 2 works - i tested it, and sound is coming out of my speakers. ALL OTHER SOUNDS though. Nope.
Above are images of what is happening.
http://www.mediafire.com/?sharekey=a334624cbb22dd3abeab3e9fa335ca4cc626a0dc 9f344?My Specifications ^^
Message Edited by Heigou on 09-07-2008 02:0 PM

Connected device is not detected on Finder

Hi guys. I am new Mac user. I have my portable photo card reader connected to my Mac, and trying to see it in Finder, but there is non. I can download pictures from it on Lightroom, but why I can not see it on Finder under Devices section? Thanks in advance for your help.

1. Remove "Audio device on High Definition Audio Bus"
2. Download from Microsoft the KB835221 hotfix and install it
3. Restart the system, and XP will automatically detect the devices
4. After this you can install realtek drivers
but for L30-134
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=22804

ITunes devices will not detect digital copy after upgrading to Lion

Hi, I recently bought a Blu-Ray that came with a digital copy. I know there are two types, as I get a lot of them. This is one of the ones where the file is copied from the disc itself. (Not one where you just enter a code and download the file.)
I put the disc in the computer and iTunes will not recognize it. I have done many of these before and never had this issue. It cannot be the disc funtionality as the DVD player will play it and the Finder recognizes it. (It is the right disc too! I didn't accidentally insert the wrong one.) I am wondering if it has anything to do with upgrading to Lion and iTunes 10.5.
Is anyone else experiencing this problem, or does anyone know how I can fix this?

Dsimagry,
Thanks for your reply. I did check the software updates for the system and iPhoto, which told me I was up-todate.
I do not see the camera come up as a drive on the desktop or in finder. In fact I don't believe that I ever did. I always used to open iPhoto and turn the camera on. Then iPhoto would ask me if I wanted to import the photos. This seems to have stopped since I installed the upgrade for Lion. I know the camera works, as I took it to my wife's Mac Mini that has Tiger and it connected and imported the photos fine. I have tried what another person stated in a post where someone else had a problem with an Olympus camera and that was to redo the disk permissions. It helped that person, but did not help me. They also stated looking for the device in Image Capture and iMovie, but my camera is not showing up there. I am suspecting that there is some going on with the OS Lion that is preventing my camera and Compact Flash memory card from being recognized. If I cannot get this fixed I may have to revert back to Snow Leopard.

Error: The Audio Device app not detected please h

Hi,
I seem to be having a problem with my audio device. I purchased a Dell Dimension XP and wanted to use the Creative Labs interface that came with the card I had purchased for my old computer. I put the Sound Blaster Audigy ZS Platinum in the new computer, installed the drivers and software but I can't seem to access some of the features on my surround mixer. For Example, I can't access Graphics Equalizer, EAX console and THX Console Setup.
I'm running Windows Media Center 2002.
Any solutions to this, I'm trying to record vocals but without the access of these features it's pointless to even use this card anymore.

Anyone?

Device 9700 not detected by recently upgraded desktop software

Recently synced my BBerry for my music. Tried to upgrade the software as prompted on the device. This failed 3 times with a fatal error. Prompted to upgrade the desktop software so I did. All ok. rebooted pc. plugged in the BBerry. Connection ok as photoshop elements downloads thumbnails of the files. Cancel this download. Start BBery DM but it wont recognised the device. Help anyone?

Hello Jim,
I suggest plugging it in on another system with Desktop Software installed to see if the issue is with the device or specific to your computer.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Captivate 4 - Not detecting Audio Device in Windows 7

Hi Experts,
I have Windows 7 64 bit. I installed Captivate 4 tiral version. When I try to set the Audio Settings, I saw that Audio Device is not detected. I have enabled all the audio devices through Control Panel -> Sound. Speakers and In-built microphone are working fine on laptop.
Still Captivate is not detecting the audio device. I tried reinstallinig the application and installing the patch but no success.
Could you please help ? Thanks & Appreciation in advance.
Regards
Ratnesh Nagori

Welcome to our community
As you are in the mode of installing a trial version, try uninstalling Captivate 4 and go get Captivate 5 instead. Captivate 4 wasn't built with Windows 7 in mind and many things are "iffy" at best. Captivate 5 is different and should work without issue on Windows 7.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Error 3 - Skipping. Device not detected. Bold & PocketMac sync issue

I am having issues getting my MacBook to recognize my BB Bold when trying to sync with PocketMac Sync Manager. When connecting through a USB - the device is not detected and so a sync can not be performed.
Blackberry support have instructed me to install/uninstall drivers and pocketmac which I have done as instructed yet nothing is working.
PLEASE can anyone help with solving this??

This worked for me finally:
Mac needs to "detect" your BB
Go to the BB menu (general)
On the BB - go to Options
Then go to Memory
There are a number of settings here
Media Card = On
Encryption = None
MTP = ON
Mas Storage = On
Here's the ONE:
AUTO ENABLE MASS STORAGE MODE WHEN CONNECTED = YES
As soon as I did that - the next time I synched - the Mac "found" the BB and the BB PIN was there.
Synch for Contacts was very good.
Good Luck!

MS Lync Audio Device Not Detected

I Have recently upgraded my lync to 2013 from 2010 and my audio device is not detecting in Lync 2013 now. Am using 3.5 mm jack Iball head phone which is working in other systems with same configuration. Can any one help...???

Hi,
In addition, if it can be detected in Windows system, you could try setting it to the default device.
Restart Lync and test.
And some related cases for your reference.
https://social.technet.microsoft.com/Forums/en-US/4a4be6e3-a68d-476c-b879-7ea6d1548792/lync-2013-we-didnt-find-an-audio-device-which-you-need-for-calling
https://social.technet.microsoft.com/Forums/en-US/30ec9d70-2cca-40be-b9dc-be7763e3530a/lync-2013-client-no-audio-device-detected?forum=lyncvoice
Best regards,
Eric

Device platform not detected in SCC

Similar Messages

Maybe you are looking for