Device Report Question

I am trying to see what devices has been added this past week....is there a way to run a customized report like that in LMS 3.2?

You can see all the devices added to DCR by running the Audit Report under Common Services > Device and Credentials > Reports.

Similar Messages

How to read device report for HP Deskjet 1510

Hi HP,
I can see from the software provided with this printer there is this option to print the device reports.
Please assist on how to read this report because it consist of unknown coding and stuff.
I would appreciate if your side can help me on this coz I assume that we can track our usage through this report.
If this is not the purpose, perhaps you may suggest any other way to get an understandable usage reports?
Regards,
Nadiya
This question was solved.
View Solution.

Hello Nadiya,
Welcome to the forums
I understand you are looking for a usage report. The printer will print a test page and you can see the page count on that page, along with the printer information, such as your serial number, etc. If there is anything else you may mean by "usage" please let me know and I will do my best to help.
Click this link: Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems
In the guide, look under "Solution six: Print and evaluate a test page and troubleshoot defects" and print a test page.
Take care,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

VISA - unable to queue operation & device reported an input protocol error.

To summarise I have two main questions:
How can I clear the VISA operation queue and what causes an input protocol error during transfer?
I am using a Tektronix AFG3022B Function Generator with latest firmware connected via USB and LabVIEW 2013 SP1 patch 2 (13.0.1f2) 32bit with NI-VISA 5.4.1.
If I have a small timeout, say 100ms, and perform a save operation and op complete query on the device (*SAV 1;OPC?), then do up to 10 VISA reads; the first few reads time out (as expected), but then I frequently get the following error:
-1073807305 (0xBFFF0037) VI_ERROR_INP_PROT_VIOL. "Device reported an input protocol error during transfer."
Once this occurs, the whole VISA session seems to become unstable and lots of the read operations fail returing this error code and not the timeout error (0xBFFF0015 (VI_ERROR_TMO)).
This only seems to happen when I do save/recall operations (either internal or to a mass storage device connected to the instrument), all other commands/queries timeout for the first few reads (as expected) then return the value. Do you think this is probably down to poor instrument firmware/hardware? Or am I using the VISA incorrectly? I would have thought that attempting to read VISA data to soon should only generate a timeout error and not a protocol error.
Reason for small timeouts:
Instead of setting the timeout to 4 seconds and having no way of cancelling the read operation I set the timeout to 100ms and run a for loop up to 40 times ignoring timout errors unless it's the last loop iteration. This means I can the operation within ~100ms.
What causes the VISA protocol error? I can't find much information on it.
Once the protocol error occurs and I keep repeating the *SAV command, I get the following error:
-1073807303 (0xBFFF0039) VI_ERROR_IN_PROGRESS. "Unable to queue the asynchronous operation because there is already an operation in progress."
Once this error occurs, how can I force a clear on the VISA queue without unplugging/power cycling the instrument?
Some NI I/O trace captures attached to show what happens and test VI.
Using LV2014 SP1
Attachments:
VISA problems.zip ‏38 KB

I thought I would try to duplicate your problems, but I only have a Tektronix TDS Scope that has USB.
I am a big fan of using *OCP? to sync instruments control and your problem is of interest to me
This very simple write/read returns the *OPC '1' return char consistently between 175-185 ms. No problem
Trying your short timeout with a loop, I do not get what I or you expected.
If I run this with an adequate timeout (something well longer than the needed 185 ms) it returns in between 175-185 ms with one time through the for loop. As expected. No problem.
BUT! If I try setting the timeout to something below the needed 175 ms like your 100ms...
Sometimes it works but it takes over 2000 ms to return but only goes though the for loop twice.
But sometime it does not work at all, taking well over 10 sec to exit out of the for loop with a timeout error.
I never see the queue error that you are seeing
How long does it take to do a simple *SAV
I don’t think the queue error is coming from the instrument. You would have to send the instruments the SYSTEM:ERROR? Request before the instrument would report any of the instruments errors.
Be sure to set your Termination Char setting. I prefer to turn it off for the Writes so I control when to send it. But turn it on for the Reads
Also I noticed from your trace files that you use the *OPC? after a *IDN?. This is not needed as you will know the *IDN? is complete when your received the string back. In fact my Tektronix scope did not like it if I sent it "*IDN?;*OPC?\n". It would not send me anything back, not even the IDN.
Is the SAV command on your instrument so long that you need to be able to break out of the loop?
Omar

Unespected device report on syslog RME 3.4 VMS

I am monitoring the logs from a CISCO PIX 506E firewall (6.3.1)on RME 3.4 VMS. I see the logs only on the Unespected device report, when I try to get a Severity summary report from that device I can not. In the RME documentation I found that the syslog for that device, it is supported. The question is: Could I get any syslog report from that device? or not?, if I could, what also do I have to do to get them?.
The RME is installed on the same machine that the VMS is installed. (Windows 2K Server SP3)

First, make sure that all of the settings are the same in the configs including Logging server IP, severity, facility.
Next, make sure that devices are in RME.
Unexpected Device shows all the devices that are sending logging messages to CiscoWorks but are not configured in RME.
If you see the logging messages in that report - your device may be managed by a different IP address than the one it is receiving the logging messages from. Perform a reverse NSLOOKUP to determine the IP that CiscoWorks uses for the device. Set the logging source on the device to that IP using the command: logging source-interface interface

The recording device reported the media error: Unknown device error. (0x0C,

Hello
I have a problem making a DUAL LAYER DVD, i have done anothers before. But now I can't burn it.
It's a message error.
(The recording device reported the media error: Unknown device error. (0x0C, 0x00.))
Next this my Mac configuration.
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 6 GB
I have DVD STUDIO PRO 4.2.1, and in the log appears this:
Starting DVD Build UNTITLED_DISC...
Compiler Initializing...
Precompiling Project UNTITLED_DISC
Compiling VMG Information...
Created 6 PGCs in VTSM1
Created 8 PGCs in VMG.
0 Menu(s) will be created...
Compiling Menu PGCs...
Writing VTS010.VOB
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Writing VTS010.VOB
Muxing VTS011.VOB
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘UNTITLED_DISC.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 2
Doing opposite track path
Setting layer switch at sector 2053488.
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing ISO 9660 directories
Writing UDF 1.02 structures
Writing files
The recording device reported the media error: Unknown device error. (0x0C, 0x00.)
What should be the problem?

There could be a few reasons, a common one is bad DVDs or a burner going bad.
[Some threads discussing the error|http://discussions.apple.com/search.jspa?threadID=&q=Therecording+device+reported+the+media+error%3A+Unknown+device+error.+(0x0C%2C0x00.)&objID=f952&dateRange=all&userID=&numResults=15]
You can try the [arrpoach in this thread|http://discussions.apple.com/thread.jspa?messageID=2453295&#2453295] as s start.
Take a look at this
Not sure which brand of DVDs you are using, but [this guide rates brands|http://www.digitalfaq.com/reviews/dvd-media.htm]
Verbatim are usually good for me for DL.

The recording device reported the illegal request: Unknown device

Has anybody any idea? I am not able to output a dvd-9 (dvd + dl). there is always the message: the recording device reported the illegal request: unknown device. The layersize is ok and the dual layer brake is set.

I don't have the exact error message with me, but that sounds similar. I bought a new DVR-115 for my Mac Pro and put the existing DVR-112 in the bottom slot. The DVR-115 worked fine for a month or so, then started getting that or a similar error. I replaced it under warranty and soon got the same thing. Then I Googled the error message an found many people having the same problem, even people with PCs. Now I just burn with the DVR-112, not worth resolving. BUT, I could be remembering the error message incorrectly, so Google and see what you get.

Financial Reporting Question - Formula row Issue

Hello,
I have a financial reporting question and would like to have your inputs in order to achieve what I am trying to do.
I have a report with two grids – grid 1 & grid 2. And there is a formula row in grid 2 that is “change between the two years” worth of data. The year and period combination is in the page of the grids.
Formula row (in grid 2) = ((Grid1.[b,6]) - [b,6]) / [b,6]
The issue is when I change the Page selection in Grid 1 the formula in grid 2 doesn’t get updated values unless and until I make a change in the grid 2 Page selection too. If I don’t make any changes in the page selection in grid 2 it keeps the data (looks like it is still considering the previously retrieved/calculated values) as it is without any update.
How can I make the formula row in grid 2 dynamic so that it gets updated no matter what combination of page selection I make in either grid 1 or grid 2 or even if I just change something in grid 1 and nothing in grid 2?
Please let me know your inputs. Any help is appreciated.
Thanks,
Krrish
Edited by: Krrish on Dec 3, 2012 7:45 AM

Page POV will be specific to the grid.Why can't you try to have the POV at the report level.In the HTML view of the report,the report will give you a Drop Down to select POV for all Grids.Select All Grids option and then set the POV which will be same for both the grids (which you want) and all your formulas will work.

Updateable Report Question.

Updateable Report Question.
Currently I am developing an XE application, so I think that is apex 2.0.
Here is an example of what I wish to achieve.
Suppose I have an emp table with columns
dept, id, name and comment.
I create an SQL report as
SELECT * from emp;
I only wish to see the name and comment columns, so in the report attributes I un-tick show the columns dept and id.
I want the user to be able to update the comment column, So I edit the comment column and in “Tabular Form Element” I change the “Display As” from “Standard Report Column” to “Text Field”
This now lets me edit the data in the column in the report.
Now want to add in an on change event to call a javascript routine that will use ajax to do the actual update.
My problem is that I need to pass in the “hidden” dept and id column values as well as the modified text, thus
In “Tabular Form Element” – “Element Attributes” add in
onchange="updateRemarks(#DEPT#, #ID#, this.value)"
Unfortunately this does not work, apex does not expand the #DEPT# & #ID#, and just passes in the literal text.
So how can I achieve this?
Thanks,
GP>

The columns and rows have a set format for the Id, so if you know one Id you know the row and the ids of all the other columns.
As an example, this will show the value of column 6 when you click on any column with the function call in the Element Attributes:
Script:
<script type="text/javascript">
function showCol6(col){
var col6 = document.getElementById("f06_" + col.id.substr(4,4));
alert(col6.value);
</script>Element Attributes:
onclick=showCol6(this);You could also use a Named Column template, specific to this region, to include the column values directly in the function call, but I think it's best to stick with the ApEx defaults if possible.

BEx Variable in Webi Report questions

Hi Gurus,
Here is my issue.
I created a BEx Query 0SD_C03 Cube with following fields
Two Columns
One Key Figure: Subtotal1
One Restricted Key Figure: Subtotal with restriction " Sales Organization 1000"
Two Rows Plant, Sales Organization
One Variable with Sales Organization.
When I ran this query in BEx Analyzer I can see all Sales Organization values in prompt list, How ever when I created a Universe and ran a webi query I can see 1000 in the Sales Organization list.
Is this because I have restricted Key Figure with Sales Organization 1000 in the query?
I removed my Restricted Key Figure from my query and tried again this time I see some 10 Sales Oraganizations but I didn't see all available Sales Organizations. Does BO Universe LOVs restricte the list?
Thanks
Sasi

Identical entry so this is being closed:
duplicate:
BEx Variable in Webi Report questions
Ingo

Why is there no devices report?

I published a landing page to BC from Muse. It has a /phone mobile option. However there is no devices report in BC. It just says "No data to display. Report statistics updated every 2 hours."
I found one other post about this where people are saying it has never worked. Is this a bug or something that hasn't been fully developed? Pretty annoying either way.
Thanks

Hi,
This was initially a reported bug #3545453 however the decision has been made to remove the feature in the next release.
Unfortunately I do not have more details to provide on when this may return.
Kind regards,
-Sidney

FORMS & REPORTS QUESTIONS.

Hi,
Can any one provide me a good no of Forms and reports question to prepare for the interview ?
Thanks in advance .

If I was an interviewer, and 60 seconds to test, I'll ask somme question like:
What kind of blocks exist?
How do you build a master detail form ?
What kind of trigger do you use for field validation ?
how do you manage graphic homogeneity ?
how do you build a LOV ?
Patrick.

I own apple devices my question is that if someone finds my device eg. iphone and restores it from their backup would they need my apple password?ios7.

i own apple devices my question is that if someone finds my device eg. iphone and restores it from their backup would they need my apple password?ios7.

They would need the password prior to getting that far in the setup assistant

Unreachable devices report

Hi,
I noticed in Cisco Prime 4.2 when we try to look for devices that are unreachable, we went to Reports>Inventory>Management Status>Unreachable Devices, but the devices indicated there are currently Up. We have another Cisco Prime Demo server not connected to the production network, it is monitoring another set of devices. We went to Unreachable Devices report from the Demo server but this time it shows no Unreachable Devices but currently 2 devices were disconnected from the network. How come this report is unreliable? Do know a report tool from Cisco Prime 4.2 that is accurate aside from the Event Monitor?
Thanks in advance for the help.

Hi Benjo,
Yes , it is completely different from them, with poller you are polling devices with different OID's in the background.
for e.g in the device avaiblity it is using sysuptime ...etc
check the below link:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/mnt-perf.html#wp1542387
Thanks-
Afroj

Supply Shortage Report question

Hi
Supply Shortage Report question:
In my cube I have material, 0calday, receipts and demand key figures.
Formula for Supply Shortage = Receipts u2013 Demand.
Users want to see number of consecutive days a particular productu2019s Supply shortage value is below zero.
Input criteria:
Date range:
Consecutive days:
For e.g. If user enters date range as u201C06/01/2010 u2013 07/31/2010u201D and Consecutive days as u201C4u201D they want to see all the products which have u2013ve Supply shortage values consecutively for 4days or more.
Can anyone tell me how we can accomplish this in Bex? Thanks in advance.
Regards
Sree

Hi,
Please check the follwoing option.
Load the msae data in one more DSO which will be a lookup DSO. In that DSO theer will be a daily load with the date as "Historization Date" which will keep the Current date with every load. In that DSO calculate Shortage Indiactor
Shortage Indicator 1 if Receipts < requirement.
By doing this you will be having Data with Historization date (Daily) with an Indicator for Shortage.
Now while loading this cube populate one Chracteritics a Shortage Counter by doing look up theis DSO.
You need to Indicator in the DSO with today's date and historization date and you need to add the counter on the basis of avilable consecutive entries by putting a loop for the same.
By this approach you may achieve your need.
I hope it will help.
Thanks,
S

IEEE 1934 devices report as being Offline in Capture Mode

I recently found the need to capture video. I had an OHCI compliant IEEE 1934 card professionally installed. Windows recognizes the card and reports it as working properly. When I connect a Firewire device, windows recognizes a device had been attached and detached when I disconnect which indicates the cables and connections are fine.
I have three Firewire devices, two of which are on the Device Setup list located in the Capture Preferences of Premiere 2.0. They include:
JVC HR-DVS2U
Panasonic AG DVX-100
My third device is a Cannon ZR45 MC and while I understand only the ZR40 and ZR50 are listed, I figure the functionality would be so similar, that the ZR45 would have at best limited support within Premiere.
All devices report as being Offline. I’ve read the manual and went through each step more than 4 times with each device and the conclusion is the same. Might there be a step within Windows that I need to perform first?
Dual Pentium Xeon 2.4Ghz
Windows XP Pro, Service Pack 2
3 GB RAM
Premiere 2.x

I would like to thank everyone for taking the time to help answer and troubleshoot my problem.
When researching the web for answers, to include Microsoft’s web site, I discovered many people had the same issues, but for different reasons. Most seemed to stem from service pack or updates received in Vista. Some derived after upgrading from XP Home to XP Pro. I kind of thought this was my issue since all my IEEE devices work with XP home on a very old Sony laptop, but not XP Pro on a rather capable workstation. In the literally hundreds of pages, posts and articles I read through, none of them helped me and according to most who have posted trouble with devices unseen by Windows or offline by any number of different editing aps, there were no fixes. My solution came quite by accident.
I don’t know if this is typical for all OHCI compliant cards not installed by a computer manufacturer, but the one I have comes with a utility called The Switch. It enables one to use either it’s built in drivers that are used by default, or Windows drivers. When I used The Switch, the Installation Wizard auto detected the Canon, and began installing about 7 drivers at the end of which, Premiere saw and manipulated the cam. I tried the same thing for the JVC. All but one driver (T.V. Tuner) was installed, however Premiere still recognized and controlled the deck. Due to time restraints, I only tried playback, shuttle, pause and stop, but there should be no reason capture won’t work.
I hope this helps others who are experiencing device offline issues. I urge you to post your solutions even if they are different from mine.

Device Report Question

Similar Messages

Maybe you are looking for