Device's touchscreen activating while on calls

device's touchscreen activating while on calls, which has resulted in dropped calls or placing the caller on hold.

I have restored the phone, it does work for a while but become unresponsive after using few times. What can I do? My iphone has been unwarranted. It works perfect during the restore and apps download, seems there are no problems for the screen. Any suggestions? Thanks.

Similar Messages

HT201304 I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?

I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?
This is so our guests cannot tamper or disable the device. We are already using Apple Configurator but their does not seem to be a way to lock down settings without a PIN.

There's a lot of restrictions information in Chapter 19 of the 4.2 User Guide.
http://support.apple.com/manuals/#ipad
By the way, a more extensive version of the User Manual is available at no charge through iBooks.

My iPhone 4 sleeps automatically even if my battery is full. It also sleeps while on call or if I use my camera.

I Don't know why my iPhone 4 keeps turning off even if the battery more than 50 percent and it won't also turn on unless I starts charging again. It also turns off while on call or try to use any apps. Please guide

Hi there tensherabb,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

After having iso7 my phone get hanged while answering/calling ?

after having iso7 my phone get hanged while answering/calling ?

Hi varinder22,
If you haven't already done so, you may want to restart or reset the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above does not resolve your issue, the next best step will be to restore your iPhone using a computer with iTunes. Please be sure to backup your iPhone first.
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
http://support.apple.com/kb/HT5262
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Thanks,
Matt M.

I have set reminders of birthdays for 2013 opting for yeARly reminders however only three of them are showing for 2014 and rest are missing can someone help, while i called up customer support they asked me to reset the phone which as well didn't help

I have set reminders of birthdays for 2013 opting for yeARly reminders however only three of them are showing for 2014 and rest are missing can someone help, while i called up customer support they asked me to reset the phone which as well didn't help

Tina,
I would go crazy if this was me. You may find this interesting from the customer agreement (to see full agreement go here:Customer Agreement | Verizon Wireless):
"HOW AND WHEN CAN I DISPUTE CHARGES?
If you're a Postpay customer, you can dispute your bill within 180 days of receiving it, but unless otherwise provided by law or unless you're disputing charges because your wireless device was lost or stolen, you still have to pay all charges until the dispute is resolved. If you're a Prepaid customer, you can dispute a charge within 180 days of the date the disputed charge was incurred. YOU MAY CALL US TO DISPUTE CHARGES ON YOUR BILL OR ANY SERVICE(S) FOR WHICH YOU WERE BILLED, BUT IF YOU WISH TO PRESERVE YOUR RIGHT TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING SUCH DISPUTE, YOU MUST WRITE TO US AT THE CUSTOMER SERVICE ADDRESS ON YOUR BILL, OR SEND US A COMPLETED NOTICE OF DISPUTE FORM (AVAILABLE AT VERIZONWIRELESS.COM), WITHIN THE 180–DAY PERIOD MENTIONED ABOVE. IF YOU DO NOT NOTIFY US IN WRITING OF SUCH DISPUTE WITHIN THE 180-DAY PERIOD, YOU WILL HAVE WAIVED YOUR RIGHT TO DISPUTE THE BILL OR SUCH SERVICE(S) AND TO BRING AN ARBITRATION OR SMALL CLAIMS CASE REGARDING ANY SUCH DISPUTE."
This may help you also: Arbitration and Mediation FAQs | Verizon Wireless
You can dispute any charges by doing an Arbitration or Mediation. I have never done it, so I can not help much there but this all may get you started.
Let me know if any of this works! Good Luck! Please keep me updated. I really hope they help you.

Net Surfing while on Call - Nokia Asha 501

well i do want to ask a question. does asha 501 supports net surfing while on call from same sim? as other sim becomes useless.
Moderator's Note: The subject was edited as we have moved the post from an existing thread and created a new topic.
Solved!
Go to Solution.

DTM was only implemented on a few phones and to be very frank, i have not personally got hands on any phone supporting Dual Transfer Mode over 2G connection. I don't think any of the newer devices has that implemented.
Besides the rest of the phones you mentioned, I remember myself using the X2-02 a lot and am very sure that the connection used to be put up on hold while there was any call or text coming to the phone.
There could then be a chance that my network provider never supported DTM. So I'll back out of here.
However i still feel that those devices couldn't do simultaneous data and voice. Maybe @Abi99 will have more information on this topic.

InformaCast 8.3 Basic Paging fails with Were sorry no devices could be activated. Your broadcast will not be completed.

I setup InformaCast 8.3 Basic Paging with CallManager 9.1 using SIP 7965 phones. The 7965s are in a Recipient Group with a DialCast number setup for that Recipient Group;
When I dial the CTI Route Point I hear;
Welcome to the Singlewire Informacast System...ding..ding
Were sorry no devices could be activated. Your broadcast will not be completed.

Amir,
The resolution I found was to go to
Admin || Dial Cast || Dialing Configurations || Recipient Groups
and add an recipient group previously created under Recipients || Recipient Groups
Restart the CTI route point in Call Manager that Informacast is using.
I also spanned the port on the phone and did a packet capture to see if IGMPv2 packets were being received properly before and after the fix was implemented.

Does apple replace devices that get bent while in your pocket?

Does apple replace devices that get bent while in your pocket?

As long as you pay for the exchange:
If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5s. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

While making call I am not audible to other end

While making call if I am using loudspeaker mode, I am not audible to other end

Hi Vinzgenius,
From you are describing, it sounds like an issue with the microphone. Take a look at the article below to troubleshoot the issue further. Check to make sure that you do not have any Bluetooth devices connected as well as restarting your iPhone.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Hope this helps,
-Norm G.

After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.

After update to 4.3.5 i phone4 is getting freezed while a call came. cant listen anything. and then it is frezzing.

Try rebooting the device by pressing and holding the on/off and home buttons simultaneously until the screen goes blank and you see the apple logo. It should take about 10-15 seconds to reboot.

My cheek/ear selects things on touch screen while taking calls. Proximity sensor problem?

Hello all
Had my X3 Compact for a couple of months now and really liking it.
APART from the fact then when I am on a call the screen still seems to be a little sensitive to touch.
I hear beeps of things being selected. Very often when I finish the call I see the screen is on Notifications or Quick Settings screen, or sometimes the Date and Time screen. Sometimes I notice that my cheek/ear has turned on Bluetooth from the Quick Settings screen.
Sometimes while on a long call (ie more time in which to involuntarily press things) the other person will suddenly not hear me anymore - no doubt due to imprecise cheek/ear selection!
Is there something wrong with the Proximity Sensor? I have tested the Sensor with the available diagnostic and it seems functional. And my peripheral vision tells me that the screen goes black as I raise the phone to my ear.
I've heard that this model can occasionally overheat, but I've never noticed/felt any dramatic peaks in temperature.
But something is clearly wrong.
As I said I have tested the Proximity Sensor.
I have not dropped or damaged my phone.
I do not use any kind of screen protector or case.
My software is up to date.
Any thoughts/ideas would be very welcome!!
(I have contracted the phone the EE in the UK - I have not contacted them yet as I thought it would be best to go straight to the manufacturers.)
Thanks very much
Jamie

Well I have been facing this issue since the first day itself and this isnt any issue at all!!
What happens is when we answer a call, out phone isnt in lock state and also we arent holding our phone constantly in one position to our ears/cheeks so theres rubbing of the screen (due to our ears/cheek) which eventually swipes down the Status bar Quick settings and then randomly turns on any feature icon our ear.cheek touches. And we keep hearing some beeps.
So what I do is once I answer a call I always make it a point/habit to manually lock the phone via Power button. This way I have found my personal solution to this problem.
And this is the only solution for this nagging issue
Also if you want, you can completely remove all icons which bother you from Quick settings so that even if your phone isnt locked while on call, nothing will get activated in the background.
So follow my steps and enjoy your Z3 without worrying about this issue.
-------- If my Post or Answer helped you out, Please KUDOS me

How to access contact list while a call is going o...

Can anybody how to access contact list while a call is going on or call is on hold in Nokia E5 moblile?

Hit the menu key, to switch to the application menu, and open the Contacts app; the E5 supports multitasking just fine.

Error while using CALL METHOD

I am getting a error while using CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
The error is class "CL_SSF_XSF_UTILITIES is unknown. How to correct that?? please help I am new to object oriented programming??
Edited by: priya singh on Nov 18, 2008 2:14 PM

This is my code.
REPORT ZSAVE_FUNCTION .
D A T A D E C L A R A T I O N S *
DATA: v_bitmap TYPE xstring, "graphic data
v_file TYPE string, "file name
v_length TYPE i. "length of binary file
DATA: BEGIN OF it_bitmaps OCCURS 0,
object TYPE tdobjectgr, "object
name TYPE tdobname, "name
id TYPE tdidgr, "id
tdbtype TYPE tdbtype, "graphic type
END OF it_bitmaps.
DATA: itab TYPE TABLE OF x.
*class cl_ssf_xsf_utilities definition.
public section.
methods : get_bds_graphic_as_bmp
DATA: L_GRAPHIC_XSTR TYPE XSTRING.
*method cl_ssf_xsf_utilities
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS: p_object TYPE tdobjectgr, "object
p_btype TYPE tdbtype, "graphic type
p_name TYPE tdobname, "name
p_id TYPE tdidgr. "id
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS: p_file TYPE rlgrap-filename. "file name
SELECTION-SCREEN END OF BLOCK b2.
*A T S E L E C T I O N - S C R E E N O N V A L U E - R E Q U E S T *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_name.
*-- Creating f4 help for the parameters
PERFORM get_f4_object_name.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-- Getting the current value entered
PERFORM get_current_value.
*-- Value Request Functionality For Input File Name
PERFORM f4_value_request.
S T A R T O F - S E L E C T I O N *
START-OF-SELECTION.
*--Getting the graphic as a BMP file
PERFORM get_graphic_bmp.
*--Convert the Xstring format to binary format
PERFORM convert_to_binary.
*--Download the graphic
PERFORM download_graphic.
*& Form get_current_value
Get the current file path entered
FORM get_current_value .
DATA: BEGIN OF li_dynp_value_tab OCCURS 0.
INCLUDE STRUCTURE dynpread.
DATA: END OF li_dynp_value_tab.
DATA: l_program_name LIKE d020s-prog,
l_dynpro_number LIKE d020s-dnum.
l_program_name = sy-cprog.
l_dynpro_number = sy-dynnr.
REFRESH li_dynp_value_tab.
li_dynp_value_tab-fieldname = 'P_FILE'.
APPEND li_dynp_value_tab.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = l_program_name
dynumb = l_dynpro_number
TABLES
dynpfields = li_dynp_value_tab
EXCEPTIONS
invalid_abapworkarea = 04
invalid_dynprofield = 08
invalid_dynproname = 12
invalid_dynpronummer = 16
invalid_request = 20
no_fielddescription = 24
undefind_error = 28.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE li_dynp_value_tab INDEX 1.
p_file = li_dynp_value_tab-fieldvalue.
ENDFORM. " get_current_value
*& Form f4_value_request
Provinding the f4 for the given path
FORM f4_value_request .
*-- if the file is to be downloaded to presentation server
CALL FUNCTION '/SAPDMC/LSM_F4_FRONTEND_FILE'
EXPORTING
pathname = p_file
CHANGING
pathfile = p_file
EXCEPTIONS
canceled_by_user = 1
system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " f4_value_request
*& Form GET_GRAPHIC_BMP
Get the graphic as a BMP file
FORM get_graphic_bmp.
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = p_object
p_name = p_name
p_id = p_id
p_btype = p_btype
RECEIVING
p_bmp = L_GRAPHIC_XSTR
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " GET_GRAPHIC_BMP
*& Form CONVERT_TO_BINARY
Converting the xstring to binary format
FORM convert_to_binary .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = v_bitmap
IMPORTING
output_length = v_length
TABLES
binary_tab = itab.
ENDFORM. " CONVERT_TO_BINARY
*& Form DOWNLOAD_GRAPHIC
Download the graphic
FORM download_graphic .
v_file = p_file.
CONCATENATE p_file '.BMP' INTO v_file.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = v_length
filename = v_file
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DOWNLOAD_GRAPHIC
*& Form GET_F4_OBJECT_NAME
Get F4 values for object names
FORM get_f4_object_name .
DATA: dynpfld_mapping TYPE STANDARD TABLE OF dselc WITH HEADER LINE,
return_tab TYPE STANDARD TABLE OF ddshretval WITH HEADER LINE.
*--Selecting the values to be provided as f4 help
SELECT tdobject
tdname
tdid
tdbtype
FROM stxbitmaps
INTO TABLE it_bitmaps.
*--To update the values in the remaining fields
dynpfld_mapping-fldname = 'F0001'.
dynpfld_mapping-dyfldname = 'P_OBJECT'.
APPEND dynpfld_mapping.
dynpfld_mapping-fldname = 'F0002'.
dynpfld_mapping-dyfldname = 'P_NAME'.
APPEND dynpfld_mapping.
dynpfld_mapping-fldname = 'F0003'.
dynpfld_mapping-dyfldname = 'P_ID'.
APPEND dynpfld_mapping.
dynpfld_mapping-fldname = 'F0004'.
dynpfld_mapping-dyfldname = 'P_BTYPE'.
APPEND dynpfld_mapping.
*--Providing f4 help with the selected values
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'TDOBNAME'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_NAME'
value_org = 'S'
TABLES
value_tab = it_bitmaps
dynpfld_mapping = dynpfld_mapping
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " GET_F4_OBJECT_NAME

HT204380 When using FaceTime can other devices on my account see my call?

When using FaceTime can other devices on my account see my call?

No. However, you'll save yourself a lot of annoyance if each device has its own Apple ID for FaceTime/iMessage.

HT201441 where and how can i find his id to contact him if the device is not activated and idon't know how to riech him

where and how can i find his id to contact him if the device is not activated and idon't know how to riech him

i will have to agree with hasscoo90. we badly need help how to contact the owner of this phone. we do understand the purpose of activation lock. and this is why instead asking Apple or any other company that offers a service (if there is any) to remove the activation lock for us, help us provide any contact information of the owner of this serial number we have and we will inform them of exactly what to do so that we can already use this iphone.
please help us. we really badly need your help.

Device's touchscreen activating while on calls

Similar Messages

Maybe you are looking for