Device sharing (printer, hard drive) with MiFi 2200?

Is it possible to setup network shares using the MiFi 2200 using Windows XP Pro SP3? I've shared devices through a wired network before, but cannot seem to get it to work through the MiFi device.
The following thread makes me think I need a dedicated router for this to work -
http://community.vzw.com/vzw/board/message?board.id=Broadband_Netbook_MiFi_Devices_tmp&message.id=4159#M4159
Thank you.

Unfortunately this function is not available on this device. It is strictly for internet access rather than sharing network settings like on a printer. You will need a different type of network sharing system for this option. Hope this helps.

Similar Messages

Cannot access shared external hard drive with other mac accounts

I cannot access a shared external hard drive with other mac accounts (all accounts are on the same macbook Pro). The shared external drive is shared via time capsule and is connected (of course) in USB. I see well this external hard drive as a shared disk with my main account. Yes shared option has been activated with the Airport Utility .. but when I open other account these othe accounts can see the external drive but cannot access to its content that is flagged with a no way sign. Strangely enough when I close my main account and start opening a new session with one of the other account then fine I can access the external hard drive and its content .. BUT then it is from my main account than I cannot access its content the no way sign showing ..
Looks like only one account at a time can access the content of this SHARED external hard drive .. any one as an idea on how to really make it a shared hard drive so that all accounts on the same mac can also access it ? I am at my wit ends on this case. THANKS ..

Results of my enquiries at Apple Genius Bar .. the guys found the problem interesting. They've been unable to provide a fix neither to give any explanation as to the reason why. To be fair I was not much impressed by the technical level demonstrated ..
In the mean time I have found that if account no.1 can see the shared external drive content and in such case account no.2 (same Mac computer) cannot see its content (only the external HD with a no way sign) this account no.2 can UNMOUNT (by ejecting) this external HD from account 1 and then remount it (just clicking on the TC shared part in a finder window) and .. see and access its content ; whilst account no.1 cannot see its content anylonger. Unless it unmounts the shared external HD and remount it .. then account no.2 can see its content anylonger. This can goes on an on.
So eventually YES the TC can allow to share a USB external drive between several accounts and a same Mac .. BUT this require to unmount and remount EACH time the external drive is accessed from a "no.2 account". So OK to share files with seldom access but not practical in case of frequent access needed.
I just I have now to figure how iTunes can automatically unmount and remount a shared external HD when it needs to access one of this shared HD content from on time account no.1 and then next time from account no.2. May be I am asking too much ..

Airport Express with printer & hard drive with Time Machine

I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
btw, When doing time machine, does it keep all the metadata with each photo?
Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
Message was edited by: Bob Timmons

Problems sharing external hard drives with Lion

I have 2 external hard drives connected to my imac. I had no problem sharing and accessing my external drives on other computers (pc & mac). Recently I just upgraded my mac os to Lion and since I am having problems accessing my external drives on my PC (windows 7).
On my PC in the shared folder I can see the external drive folders but I am getting an error code when I try to open them. I have no problem accessing my imac folders on my PC, just my external drive folders.
I would like some help because it would be nice to access them wirelessly on my PC without having to disconnect them from my iMac.
Rome.

My external hard drive was formatted in the FAT32 format--my iBook had no trouble reading or writing on this drive, and neither did my family's Dell deskop.
If I recall correctly, the FAT32 format cannot store files larger than 4GB. Also, you will have to partition the drive. My 160GB drive was split into 4 parts, each about 30GB in size. This is another limitation of the FAT32 format.
Formatting my drive was such a pain--and time consuming--that I didn't bother to format the remaining 30 or so gigabytes.
I've reformatted my drive to be HFS and will likely do some work with our home network so that our Dell will be able to send files to my machine & then to the external hard drive.
Programs exist for Windows machines to allow them to read a HFS (Mac-formatted) volume. If you want to be able to use all space possible on the hard drive, purchasing such a program may be your best option.

Sharing External Hard Drive with Windows PC

I just purchased the Maxtor Turbo III. I can read/write to/from my PowerBook to the Maxtor, but I cannot even see the drive when it is attached to my PC. I'm assuming that it the drive has been formatted for OSX but that it needs to be reformatted for PC.
Is there a formating method that can be applied such that both Windows PC's and Macs can read and write to the drive?
Thanks

You wrote: "Thanks, but isn't Fat32 "old technology"? And doesn't it have file size limitations?"Yes: 4 GB is the largest file size under FAT32.
See my "Sharing a FireWire drive between a Mac and a PC" FAQ for some other ideas.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Sharing external hard drive with all home macs and pc's

I'd like to connect my go flex desk hard drive to my BT home hub 4 and access it through my macbook pro, is this possible and how can I do this myself?

You need to format the external drive to a format that can be used by Windows, OSx, and your BT home hub (what ever that is). So I think your best bet would be to format it FAT32 or ExFat since Windows and OSx can read/write to a hard drive formatted as FAT32 or ExFat. Read your BT home hub documentation to determine how to connect a hard drive to it. Most likely it will have a usb port if hard drives can be connected to it.

Sharing External Hard Drive with PC

I have added external HD that has one partition formatted in FAT32 to my iMac. My goal is for this EX. HD to stay connected to my iMac but I want to be able to see it and share it with my PC. Both computers are located on my personal home network <router - cables, etc.>.
What I've done so far is as follows:
On my iMac <OS X 10.4.10>, I have turned on Personal File Sharing and turned on Windows Sharing. Also I have created a user account to match the user account on the PC.<even though Winuser was there already>.
My iMac can see the folders I have shared on my PC.
My PC <XP SP2> can see the folders and files on my iMac.
My PC cannot see the EX. USB HD attached to my iMac.
I tried putting an alias of my EX. HD in my Public Folder but when I click on that from the PC, it doesn’t work. The message my PC displays says: HD alias is an unknown File type.
I don't see anything else I can do to make the EX. HD visible to the PC. Are there any ideas what I should do to make this setup work? Or isn’t it possible for an iMAC to share an EX HD with a PC?
Thanks for any and all help
Skitterbug

Hi Dennis!
Wow! A perfect tool <SharePoints> and it worked like a charm. I am busy playing with the SharePoints App. now and if I run into any questions, I'll post back. But so far this seems to do the trick for me!
Also thanks for the link to the document about Sharing files between PC and Mac. I hadn't seen this one and I got to where I am now by trial and error. I had worked on the old LCII and III and later on some of the PowerMacs but my poor brain was a bit rusty regarding the steps I needed to take. Add to that, a lot of what I used to know doesn't always apply to the current platforms!
Thanks lots for your great help! <thumbs up>
Skitterbug

File Sharing: Sharing additional Hard Drives with XP

I have a small home network containing a Mac G4, 2 mac laptops, and my step-daughters Windows XP computer. (The macs are all running 10.4.11) Sharing between the macs is no problem. I can access anything I want between those computers. Sharing the PC is no problem. I have shared folders set up on the PC, and can access those files on the Macs. Sharing the Mac files on the PC is a bit more problematic.
Here's the situation: I set up the Mac for Personal File Sharing and for Windows File Sharing. Then on the PC, I go to "My Network Paces" and add a new Network place. So far, so good. I can "see" the Mac G4, as I expected. I add the G4, and it asks for a login and password. Still no problem. I enter my login and password. Here's where the problem comes up. This particular G4 has three internal harddrives, and an external. I can access ALL the drives from the other Macs. But not from the PC, I can ONLY access the "home" folder for the user that I logged in as. No additional drives, not even the entire "main" drive. JUST the home folder.
So what I need to figure out is, how do I access the extra drives from the PC?

Hi Daniel,
Your issue is most likely ealted to your G4 partitions being in the HTFS format which Windows does not undestand.
Ref: http://guides.macrumors.com/File_systems
That is why it will not work unless you use special software such as:
MacDrive : http://www.mediafour.com/products/macdrive/
Hope this helps,
JM

Can this device be used as an external hard drive with a macbook pro laptop to use files on the airport?

can this device be used as an external hard drive with a macbook pro laptop and use files on the airport time capsule?

If you mean an AirPort base station other than the Time Capsule, it doesn't have internal storage.
If you mean a Time Capsule, its internal drive can be used for regular file storage but shouldn't be; as with all drives, it'll eventually fail. You're better off using a standalone drive and setting Time Machine to back it up as well.
(112309)

I have an external hard drive with a shared music folder, which I can access (from Home Sharing) and play music on my Windows computer. On my new Mac, I can see the drive in Home Sharing but not play any music. What's the solution?

I have an external network hard drive with a shared music folder (WD MyBookLive), which I can access from Home Sharing and play music on my Windows computers. On my new Mac, I can see the drive and the music in Home Sharing but the tracks will not play. All the other authorized computers in my home network show up in Home Sharing and I can play the content. What's the solution?

Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

A while back my computer crashed (hard drive and motherboard:/) im a DJ so its kinda a big thing. my mom has a computer whith itunes on it, i signed on with my account but how do i get the music back. i dont have it on any device, just the hard drive that

a while back my computer crashed (hard drive and motherboard:/) im a DJ so its kinda a big thing. my mom has a computer whith itunes on it, i signed on with my account but how do i get the music back. i dont have it on any device, just the hard drive that crashed. can someone please helped i put soooooo much money into those songs a good 4,000 $
please someone help

Hi Glenn,
You need to Authorize your Mom's computer to your iTunes sign on. Sign on to iTunes, then go to Store at the top of the screen, and select Authorize this Computer.
Then you can download your purchases from your iTunes library by going to the iTunes Store (the one in the sidebar), Music, and then under Quick Links, Purchased.
Once the Purchased window comes up, select "Not on this Computer", and then select All Songs. Your purchased songs will display with a cloud next to them, and you can download them selectively or "Download All" (lower right-hand corner).
Hope this helps!
Cheers,
GB

Sharing an external hard drive with a PC

Hello. I am still using a 2005 PPC iMac running Tiger. My photos are stored in Aperture and Lightroom 2, however they are all stored on my computer's hard drive. I want to remove them from my computer and store them on an external hard drive instead.
My flat mate has a Windows based PC laptop and also has stuff he wants to store on an external hard drive. We were thinking about going halves and getting a Western Digital 2TB hard drive and sharing it.
I understand that the hard drives can be shared for both formats using FAT32, although I am aware there are file size limits and data corruption is very possible, so I will be avoiding that. I have read that it can also be done using NTFS for a PC and downloading NTFS-3G for use with the Mac so both formats can read and write to the hard drive.
My question is this; how will this affect my Lightroom library? Is it even possible to store a Mac based Lightroom Library on an external hard drive that has PC files on it. Or is it safer to not bother sharing a hard drive and getting individual ones?

Fancy an Apple? wrote:
Hello. I am still using a 2005 PPC iMac running Tiger. My photos are stored in Aperture and Lightroom 2, however they are all stored on my computer's hard drive. I want to remove them from my computer and store them on an external hard drive instead.
My flat mate has a Windows based PC laptop and also has stuff he wants to store on an external hard drive. We were thinking about going halves and getting a Western Digital 2TB hard drive and sharing it.
I understand that the hard drives can be shared for both formats using FAT32, although I am aware there are file size limits and data corruption is very possible, so I will be avoiding that. I have read that it can also be done using NTFS for a PC and downloading NTFS-3G for use with the Mac so both formats can read and write to the hard drive.
My question is this; how will this affect my Lightroom library? Is it even possible to store a Mac based Lightroom Library on an external hard drive that has PC files on it. Or is it safer to not bother sharing a hard drive and getting individual ones?
If you are so concerned about data corruption that a 25 year old well tried file system is too risky, what makes you think that a relatively untried, free 3rd party addition is even going to be as safe?
Maybe you should rethink this.

I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
Questions that I would like to get answered.
1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
Any help is appreciated.

Let me first document the steps that did not work and then I will document the steps that worked.
1) Replaced the hard drive with SSD.
2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
8) I had 236 GB to restore so took 3.5 hours before it was done.
9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
10) Heard the chime and after that it was a white screen with no Apple logo.
Was visibly upset and started thinking what my next move will be. Then tried these steps
1) Again powered off the machine.
2) Connected my internal HDD once more as an external drive
3) Powered on and on hearing the chime, pressed Command-R as before
4) Once the OS X utilities screen popped up, this time chose Install OS X
5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
6) Installed OS X by following the prompts.
7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
8) Chose the option to move the data from my original HDD.
9) Took another 3 hours to move the data.
10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
11) Booted successfully and all my content is now accessible on the new SSD.
Moral of the story - It is the spirit that counts.

I am not able to use my external hard drive with my Mac.

I am not able to use my external hard drive with my Mac. It was initially used with my Windows 7 laptop. Now when I insert my Hard drive in the Mac, it doesn't allow me to delete, format, make folders or copy new files on to my hard drive. I no longer have a Windows PC and am stuck. I tried going to Disc utilities,selected my HD, clicked on Erase and then changed the Format type to MS-DOS (FAT) but no luck .. Any other steps or advice?

It was likely formatted in NTFS which is readable by the Mac, but not writeable.
You should be able to reformat the disk in Disk Utility.
After having copied all the data off of it, you can try re-partitioning it.
Select the hard drive in the disk list in Disk Utility. Hard drives are the device itself, are left-aligned in the list, and are usually named with the manufacturer, size, and model number.
Click on the Partition tab.
Select 1-partition from the partition menu.
Click the Options button and set to GUID
Set the format to Mac OS Extended (Journaled)
Give the Volume a name and click Apply.

How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7?

How do I connect my external hard drive with all of my digital media to my Apple TV network and make it accessable 24/7? I have the latest Apple TV, ipads, iPhones as well as a solid HP Windows machine all on my home network. Is there a way that I can connect my hard drive to my receiver or Apple TV directly so that the digital media is available on my network 24/7 rather than have it connected to my computer and available through Home Share which never works anyway??

Sorry it's all done through iTunes.
The following article(s) may help you with home sharing.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.

Device sharing (printer, hard drive) with MiFi 2200?

Similar Messages

Maybe you are looking for