Device status ESTO  INST

Dear experts,
for one device i am getting the device status message as ESTO INST in IE03 txr, can any one have idea for what reason its showing both the status? either it should be INST or ESTO,  this device is all ready installed for one installation also.
it would be more appreciable .
cheers.

Hello,
It's possible to have status INST ESTO at the same time.
I mean you can execute a good receipt for an installed equipment. System ONLY sends a WARNING. It's explained in the old note 98966.
With this logic it is not possible to dismantle an equipment which is on stock AND installed into a functional location. Status ESTO will forbid dismantling.
There are some possible options:
1. When equipment has status ESTO and INST:
   You can now move the serialized equipment from stock (eg. with transaction MB11). Now the status ESTO isn't active anymore. Now you can dismantle the equipment from the functional location.
2. Modify the system status logic:
   Call transaction BS22
     System Status I0184
     Double Click
     At business transaction PMO3 change from forbidden
     to warning (or allowed).
   This is considered a modification and you should only do this to resolve the current situation, restore the original settings after processing current data.
3. You can use the user status logic to forbit moving an serialized equipment on stock which is still installed into a functional location. Creating a user status is NO modification.
   3. can be used in combination with point 1. and is preventing a return of an installed equipment.
4. It is also possible to enable/disable status ESTO using menu path:
       Edit > Special serial no functions > Manual transaction
I hope this information is helpful.
Regards
Olivia

Similar Messages

  • System staus ESTO INST

    Hello Gurus,
    Some of the equipments in our plant have the status as ESTO INST. I want to change the status to AVLB.
    Scenerio is as follows:
    We create PO for 10 qty (equipments) in a single line item
    Goods are received against the serial number for the PO line item
    Goods are issued to the Asset master.
    In some cases, what happend was Goods were receipted Twice for a serial number and goods were issued twice to the asset master. this made the asset master value doubled. After few days, we found this and cancelled the 2nd goods issue and goods receipt. Thus the PO qty increased by 1 and we could make the goods receipt to the other serial number and issue to the other asset master.
    But now the problem is the first equipment which was cancelled has the status EST INST. How can i make this to the AVLB status.
    Your help would be highly appreciated.
    Thanks in Advance.
    Sakthi

    Hello Gurus,
    I got the answer for this.
    Go to IE02 --> Special serial number functions --> Manual transactions -- > from Stock.
    When i selected the radio button, it helped me to remove the stock from the "serdata" tab and the status is changed to INST.
    Once the status is changed to INST, i could easily dismantle equipment from the functional location. Thus the status became AVLB.
    Thanks,
    Sakthi

  • Intel Management Engine Interface, Device status: This device cannot start (Code 10).

    hi Tec,
    Under System devices for the Intel Management Engine Interface, Device status: This device cannot start (Code 10). Using original driver version: 6.0.0.1179 A released date 09-12-2009 (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79194-1&cc=us&dlc=en&lc=en&...=), running OS windows 7 Enterprise, 64 bit. HP Pavilion dv3-2390eg Entertainment Notebook PC.
    Issue: my computer auto restart after 2 hours please resolved the issue
    Logs captured from System summary:
    [Problem Devices]
    Device  PNP Device ID   Error Code         
    Intel(R) Management Engine Interface
    PCI\VEN_8086&DEV_3B64&SUBSYS_1404103C&REV_06\3&11583659&0&B0       this device cannot start.               
    Cisco Systems VPN Adapter for 64-bit Windows                ROOT\NET\0000               This device is disabled. 

    Hi Jeenny,
    Welcome to Lenovo Community!
    As per the query we understood that you are facing multiple issues on your ThinkPad Edge E540.
    You can download Intel(R) Management Engine Interface directly or run ThinkVantage system update utility and update the entire required driver for your system.
    Hope this helps. Do post back if issue persists!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Equipment Status ESTO

    Dear Experts,
    I  want to send one material with serial number (Equipment) to vendor.For that i dismantled from respective location and moved to the store using 561 movement type.(Goods receipt against "other" in MIGO).Now i am sending the same to vendor using the MB11 (Movement type- 541.Stor location- XX01)
    That means i am moving the material from my storage location XX01.
    After i send, if i check the equipemt status, still its showing the status ESTO.Whether the status describes the material is lying in our warehouse or Vendor's warehouse? But its clearly indicating the vendorcode  in the Serial No. tab in IQ02.
    So the system must show the relevent status.
    Please reply.
    Regards,
    Prasanna

    hi prasanna
    541 mvt type is used in subcontracting purpose,it you do the transactive with 541 you can see the status of the material in MMBE T code where it will show material is in vendor premises,when you do the goods receipt the material inventory will reduce.you can check in the equipment master Edit>special serial no functionms>manual transaction  you can see the stock type
    regards
    thyagarajan

  • How to hide mobile device status on iPhone 6?

    How do I hide my "on mobile device" status on the iPhone 6?  I do not see "my info" anywhere as the other posts suggest.  Also, I already removed my phone number from my profile.  Thanks!

    Hello chemahmud,
    It sounds like you have Grayscale turned on. If you go to Settings > General > Accessibility and toggle off Grayscale. Once you do that you should have color back.
    Invert Colors and Grayscale
    http://help.apple.com/iphone/8/#/iph3e2e1fb0
    Regards,
    -Norm G.  

  • Printer Device Status Page Error on IPP site

    I have print services on Windows Server 2012 Datacenter. When I go to the IPP site and click on a printer that has a Device Status link under the View section, I receive an error,"Device Status Page Error...We are unable to generate the device
    status page for the selected printer. Please contact your system administrator for more information". This happens on all our printers that has a Device Status link. And the printers are different models and some are type 3 and type 4. I have tried accessing
    the ipp page on Server 2012 and Windows 7 and it still gives the same errors.

    You are correct about Microsoft not creating a hotfix for this issue in current versions of Windows. Microsoft support replied to me and indicated the following:
    Hi Tiffany,
    Thanks for your reply.
    After consulting with our product team, we will not fix this issue in the current product consider the many changes involved. but we might
    consider it to the next generation product.
    Thanks for your understanding and cooperation. Please feel free to let me know if there is anything else that we can help.
    Best Regards,

  • Internet Printing Services - Printer "Device Status Page Error". Please Help.

    I am getting Device Status Page Error :
    We are unable to generate the device status page for the selected printer. Please contact your system administrator for more information.

    Hi,
    What’s the OS version of your server? If it’s Windows Server 2003, please try to refer to the following article to see if it could help.
    "Device Status Page Error" error message when your printer tries to display a status notification message
    http://support.microsoft.com/kb/884552
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • How to stop Device Status Alerts

    I recently installed the software for an All-In-One C7280 including the HP Solution Center.  I like the convenience of one click access to printer information but teh Device Status Alerts that pop up in the corner of the screen are too big, too intrusive and annoying. I've searched the settings and can't find any way to turn them off. I don't want to turn off the Imaging Monitor and lose the features but these things are making me crazy.  Can anyone help?

    I am equally annoyed and have searched all the help menus in the HP software to no avail.  Evidently, HP expects us to automatically fall in love with these annoying work-intruders:
    Source: HP Solution Center Help, Search for "alert" - Device Status Alert (emphasis mine)
    "Alerts and other key messages related to your device are displayed prominently so that you cannot miss them even as you are busy working on your computer. For example, you can find out if your device is low on ink or if your device is ready for printing from the alerts that appear in the HP Solution Center and in the lower right-hand corner of the screen.
    You can view alerts or the device status easily:
    • Every time you launch the HP Solution Center, error messages or alerts appear directly in the HP Solution Center window. Select the message to get more details about the alert.
    Note When you need to purchase ink, you will see the alert details as soon as the Solution Center is launched."
    I am quite sure this will be my last HP printer.

  • After downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    after downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    additional info.
    I have found the correct error definition in english.
    "can not start the device (Code 10)"
    I have updated my bios to the latest version.
    I have just tried to uninstall all USB-drivers, and reinstall them.. Still no luck
    I have tried to uninstall and reinstall all webcam drivers - no luck

  • NI-Motion PXI Card Device Status = Is Not Responding

    I am unable to communicate with my NI PXI-7358 motion controller card.  The general tab in MAX for the card shows that "Device Status" = "Is Not Responding" see attached.  I have un-mapped and re-mapped the remote device.  I have also removed and re-seated the PXI card without any success.
    Solved!
    Go to Solution.
    Attachments:
    PXI-7358 - Is Not Responding.PNG ‏29 KB

    Hi Jeffmg, 
    This seems to be a known issue. There is an internal knowledgebase documenting this problem and a potential solution. 
    The solution according to the KB article:
    "This problem can occur when a previous board was mapped to the host machine. The NIMtnSvr.exe is based on Board ID's and sometimes gets stuck. To fix this, close any NI software running and then open the task manager and end the NIMtnSvr.exe process. This will shutdown the server and allow it to start from scratch the next time it runs. When you open MAX, the boards will appear on the local host correctly mapped."
    -N
    National Instruments
    Applications Engineer

  • Master Batch change for serial number in stock with status "ESTO" by IQ02

    Hi,
    How  to change master batch for serial number in stock with status "ESTO" by IQ02 transaction?

    Hi Harsh,
    if this field is not ready for input you have set the stock check to '02 Error' in your serial number profile in order to ensure
    consistency between the stock data of serial numbers and inventorymanagement.
    In this case you have to do a material movement posting inMB11 with movement type 309 (material to material). Enter the new batch as batch of the receiving material. This movement will update both the master batch and the stock batch of the serial number.
    Regards,
    Mauro

  • My device isn't rooted, but device status says custom

    I have never rooted or modified my Galaxy Note 3 but when I boot it up there is an unlocked padlock symbol that says "custom".  It also says "custom" under "device status" in the settings. If it isn't rooted, why does my phone say that it's custom?  

    I bought my phone brand new from an official AT&T store.I have never rooted my phone before and I haven't let anybody else root my phone.Also, in bootloader, next to "Knox warranty void" it says "0 X 0". Knox was not tripped Is there anything else that might be causing the "custom" system status? 

  • Remove function location for equipment with status ESTO

    hello all,
    i want to remove function location for a given equipment,
    this i am doing it by BAPI_EQUIP_DISMANTLE,
    how ever i am unable to delete the function location for the equipment whose status is ESTO
    now my question is how do i remove function location for the equipment whose status is ESTO
    thanks in advance..

    Another option is Tcode BS22.
    Go to the Status I0184
    Here Double Click on the SysSt to reach this screen. Here in Business Transaction PM03 change the Radio button from Forbidden to Allowed as shown here.
    Confirm process implication won't be there.
    Jogeswara Rao K

  • Voice Mail Device Status is Unknown

    My Voice Mail Port: CiscoUM1-VI1 has a status of Unknown, with the IP registered as 10.0.1.2 (Unity)
    I'm at a loss as to why its at this.

    If it's just 1 port and you've already tried resetting it countless times, chances are you'll need to reboot Unity to get it registered again.
    HTH
    java
    If this helps, please rate
    www.cisco.com/go/pdihelpdesk

  • Getting installation from billing document and then devices from that inst.

    From the  billing document with billing class 'PSPC'  how to collect the installation(there could be more than one device) connected to it and the 'valid from' date.Which table are used in terms of ABAP.
    How  to query on these tables.

    As far as I know
    1. Get the VERTRAG from ERCH for the given BELNR
    2. Get the ANLAGE from EVER for that VERTRAG
    3. Get the u2018Valid fromu2019 date  from EANLH for the above ANLAGE
    Regards,
    Rajini.

Maybe you are looking for