Device type and print options

Hi all,
The device type HP LJ 4350 enables print options and allow us to set which paper tray is to used in a specific form.
However, our usual supplier does not sell this device type anymore.
Does anyone know another device type that could allow tray configuration in the SPAD transaction?
Thanks for your help.

Hi,
Take a look at SAP note #1049778. For recent releases, the device type HP4350 should be already available in transaction SPAD n the system.
Also as per SAP note #1049778, most of the new device types that were developed within the SAP Printer Vendor program (SAP note #1130927) support the new print options.(see SAP note #1103422)
Regards,
Aidan

Similar Messages

URGENT: Smartform - Attaching Font to Device Type and Printing

Hello Smarform Gurus,
I have uploaded CORPOS font to SAP and using in SMARTFORMS. Whenever the PDF is called for invoice, it should print immediately.
When I open the smartform and then print, the printout is coming fine with CORPOS font.
Problem: When Invoice is created and PDF is called immediately, the prinout is not coming properly. It's because the printer device type KYOFS150 we are using does not support CORPOS. Pls let me know the options we have. We have also referred to SAP note 12462.
Thanks in advance,
Abhishek

Hi
U need to update the printer device type KYOFS150 or use another one supports that font
Max

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Sales Orders Screen: Preview and Print Option Not Available in Actions LOV

Hi,
We are using Custom Responsibility for Order Management.
We can't find the Preview and Print Option in Actions list(Sales Orders -> Query for Sales Orders -> Actions).
Kindly let me know how to add the Preview and Print Option to the LOV.
Thanks,
Tamil

Hello,
You have to find this function in standard responsibility and copy this name to your own.
Regards,
Luko

Savs as and Print options to be restricted in Portal DMS

Hi experts,
When the user opens a document in Portal DMS I need to restrict save option and print option.
Is this possible if yes could you please give me the possible solution.
Please help me in this
waititng for your response.
Regards,
Shilpa.

Hi Shilpa,
I think it can be done in client computer (windows settings)... check out this link to control the MS word pop up
http://www.shaunakelly.com/word/sharing/OpenDocInIE.html
Thanks,
Pradeep

Transfer order layout and print options

Hi Guys
Where we can see the Transfer order layout and Printer options settings in SPRO

Hi,
Refer to this path,
SPRO-IMG-Logistics execution-Warehouse Management-Activities-Define Print Control.
Regards
Ravi Shankar.

HT204135 I have two Epson printers and one Canon printer. Why am I unable to access the same print options on my MacBook Pro as I could on mp PC i.e. select paper type and print quality?

I have just purchased a MacBook Pro as my PC has finaly died.
I have three Inkjet printers i.e. Epson Photo PX700W Epson Photo R340 and a Canon Pixma ip4600 which I connected to my Mac and the print drivers were automatically downloaded. Now when I print using any of the printers the functionality PC i.e. Choice of paper and print quality settings. Is this all I get when using the Mac OS lion or should the functionality be on a par with Windows?

Depending on the application you are printing from, you may need to press the Show Details button in the print dialog to see all of the additional driver menus.
The image below is for the extended print dialog of TextEdit and for a Canon MP990 printer. The Show Details button is on the bottom of the print dialog and will change to Hide Details when selected. And with the menu changed to Quality & Media, you have paper options and print quality settings.

Graph legend and print options

When building a graph using the graphTable bean, I'd like to place the legend below the graph instead of above. How can this be done?
Also, the graph plots a number of lines, each of which is rendered in a different color. Is there a way to make the graph lines cross-hatched, or dotted, or something else so that when printed in black and white the user is able to associate the graph line with the legend?

Hi,
Take a look at SAP note #1049778. For recent releases, the device type HP4350 should be already available in transaction SPAD n the system.
Also as per SAP note #1049778, most of the new device types that were developed within the SAP Printer Vendor program (SAP note #1130927) support the new print options.(see SAP note #1103422)
Regards,
Aidan

Pricing condition type with print option

I have a special requirement. Printing option "b" maintained for condition type in pricing procedure. Example ZR00. For some customers this should not print and should allow only for specific customers.
Any clue will appreciated.
Please don't send the links.
Suddu

hi,
is it that those conditons that are printed are only applicable to a particular customer.
or
though a conditoin is applicable but still you dont want to show.
However my observation is, it requires some enhancement of Z table kind of thing. Reason is a discount which needs to be printed today may not be required tomorrow to be printed or the other way round. It depends on the customers business nature with your client. In such case it has to be part of master data where the enduser should have an option to make the necessary entries from time to time.
If we hard code in the print program initially it can work. It will check the customer and print only those discounts but tomorrow if there is a change we have move a request to the print program again which is not the right approach.
regards
sadhu kishore

Device Type to print IR56B

Hi,
What is the device type to be used for generating and printing the IR56B form with Chinese Character?
We are currently using the following device types:ZHANWIN and SAPWIN. However we cannot print the IR56B form completely. The bottom part (I.R.56B) is missing. We cannot change the device type because the form should be printed in one sheet as per client's requirement. And the form should print Chinese Characters. So, is there a note that we should apply to print the IR56B completely or is there other device type that we can use?
Please advise asap.
Thank you,
Claire

Hi Salil,
Thanks for that information. However the issue is when we print the IR56B form, the "I.R.56B" is missing at the bottom line of the form when we use the device types:ZHANWIN and SAPWIN.
But when we use the device type: HPLJ4000, the "I.R.56B" is not missing at the bottom line of the form however the hard copy is being printed into 2 separate sheets and cannot print Chinese characters.
Is there a note or anything that we need to change in the format setting of device types:ZHANWIN and SAPWIN?
Thank you,
Claire

Device type for printer types

Hello,
Could you please tell me the device type for these 2 SAP printer types:
HP Color Laserjet CP1515n
Triumph adler DC 2218
I searched for these, but without any success.
Thank you for your help in advance,
Noemi

Hi,
You can refer to the SAP note 8928 and solve your problem.
Good luck
Tao

Device Type to print Vietnamese Characters

Hi Gurus,
I can print Vietnamese characters in a laser printer using the device type SWINCF and Access Method F (Frontend printing).
Now I want to print using Access Method U (Print using Berkeley Protocol) in a network printer (located overseas). I am using a unicode device type ZHPUTF8F because our SAP system is running under Unicode (ECC 6.0). Unfortunately the printout for the Vietnamese characters are wrong (garbage characters). Is it possible to print Vietnamese characters using a device type other than SWINCF? The printer model that I am testing with is HPLJ 4250.
One more thing, we will be needing to print using a dot matrix printer. Is there a specific device type that can print Vietnamese characters for dot matrix printer (e.g. Printronix)?
Thanks,
Andre

Hi Andre,
did you check SAP note 750219 that all listed prerequisites are met ?
Regarding other printers and Unicode support, please have a look at:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1015a496-94d5-2b10-3c8e-845ff55480c0
or apply SAP note 1036961.
Best regards,
Nils Buerckel
SAP AG
Edited by: Nils Buerckel on Mar 19, 2010 5:09 PM

Adobe Form Device type and Smartform Device type

Hello experts,
Please tell me It there any Body Whose Company is Using both Adobe Form and smartform too?
If YEs
Can You Please tell me how they are Printing Adobe Form and Smartform. Whenever End user take the Print out they changed the Device type Or using only one type of device type for both smartform and Adobe Form.
Thanks in Advance
Shelly Malik

Hi,
refer the following link.
[http://help.sap.com/saphelp_nw70/helpdata/en/25/6fa8fd27837846990a7a6813b06f80/frameset.htm]
Regards,
Surendar Reddy.

Search device Type for Printer Ricoh Aficio BP20n

Hi does anyone knows a Device type for the printer
Ricoh Aficio BP20n
I looked the sNOTE 8928 which routes me to sNOTE 485240.
but "485240" does not exist.
Notes with device types for Gestetner and Savin are not listening the BP20n printer.
"Savin" is a US subsidiary company from Ricoh.
greets chris

Hi Christian,
That's strange, I could see note 485240: Device types supplied by SAVIN
<a href="https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E">https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E</a>
Symptom
The printer manufacturer SAVIN supplies SAP with the following device types. These device types are produced, maintained and supported by Ricoh.
Should you encounter problems while you are using these device types in SAP, do not direct them to the SAP Support hotline. Instead, use the support addresses of the SAVIN Corporation listed below.
Other terms
Device type, SAVIN
Reason and Prerequisites
Detailed information on the SAP device types supplied by the printer manufacturer SAVIN.
Solution
The following products are supported by the SAVIN device types:
Multi-functional Devices
- 4015/4018/4018d
- 8016/8020/8020d
- 9922DP/9927DP *1
- 2522/2527
- 4022/4027
- 8025/8030
- 8025e/8030e *2
- 9935D/9935DP/2035DP/9945DP/2045DP *1
- 2535/2235/2545/2245
- 4035/4135g/4045/4145g
- 4035e/4135eG/4045e/4145eG
- 8035/8045
- 8035e/8035eg/8045e/8045eg *2
- 2055DP/2070DP Type700
- 2555
- 2560/2575
- 4051/4060/4075
- 8055/8065/8075 *2
- 2085DP/2105DP Type850
- 2585/25105 Type850
- 4090/40105 Type2105
- 8090/8110/8135 *2
- C2408/C2524/C3210/C2532
- C2525/C3030 *2
- C2820/C3224/C3828
- C2410/C3210e
- C2824/C3528/C4535
- C3535/C4540 *2
- C6045/SDC555
Printers
- SLP26/SLP26n
- MLP26/MLP26n
- MLP25/MLP25n
- MLP28/MLP28n
- SLP32
- MLP32/MLP35n
- MLP45
- MLP145 *2
- CLP1620
- CLP22
- CLP1036
- SLP38c
- CLP28
- CLP35
- CLP17
- CLP18
- CLP831
- CLP26DN
- CLP27DN/CLP31DN *2
- MLP75n
- MLP175n *2
- CLP128/CLP135
SAP device types ZA001vvv (Latin-1)/ZA002vvv (Latin-2)
These device types support the above-mentioned printers and multi-functional devices. You can download them from the Internet sites listed under "Support".
Latin-1 (Western Europe) supports the following languages:
English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Norwegian, Danish, Finnish
Latin-2 (Eastern Europe) supports the following languages:
Hungarian, Polish, Czech, Croatian, Romanian, Slovak, Slovenian
The ZA001vvv/ZA002vvv device types support the following functions:
Input bin / Output bin
Stapling & Hole punching
Paper type
Duplex printing
Job offset
Resolution
Number of Copies & Collation
EconoMode / Toner saving
Auto tray change/switching
Edge enhancement/Smoothing
Paper size
Orientation
Character set / Symbol set
Color printing
Slip sheet
Edge-to-edge mode
*1: Does not support bar code printing and OCR typefaces.
*2: Supports Unicode printing.
For more information, download the customer documentation from the Internet sites listed under "Support".
Support:
Telephone: 1-800-RICOH(74264)-38
Internet: http://www.savin.com/
Download: http://www.savin.com/savin/savin_com.nsf/SupportDrivers/

Open PDF with disable save as and Print option

Hello,
I want a pdf viewer to use it in my website with disabling save as and print ,i mean user only can see my books online.I need something like "books.google.com" viewer. It is possible thru java programming or with the help of any open source. Please provide me some solution i am in deep trouble.
Thanks for any reply.
Shambhu Mitra

You cna do this with the security options in the PDF file itself, which you can set with Adobe Acrobat, assuming you have access to the security options in the first place.

Device type and print options

Similar Messages

Maybe you are looking for