Device type creation

can anybody let me know how to create a new device type in SPAD.
I need to upload a *.pri file into sap and create a device type first and then create the output device..It would be helpful if you could explain what the character set is?
Thanks
Raghav

Check with below links :
http://help.sap.com/saphelp_nw04s/helpdata/en/d9/4a956151ea11d189570000e829fbbd/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a956151ea11d189570000e829fbbd/frameset.htm
Thanks
Seshu

Similar Messages

Regarding Header And Footer in Data type Creation

Hi All,
Can Any One Please Send me One Screen Shot Developed with Header And Footer in the Data type Creation
I want to Know How to Create And where to create that in DT Creation
And Why Do we need Both of these in DT Creation
Regards
Vamsi

Hi,
Will u Please send One Screen With These Details, So that I Can Uderstand More
ID : [email protected]
Please send
Regards
Vamsi

ABAP list report wont print on Z device type with Z format

Our developer have created a report which outputs data in ABAP list format and the standard format would not fit. We have since created a custom format and copied a device type in to custom device type. So we now have a custom format and custom device type. However when we print, it spools correctly and shows as green but the report wont print. The only thing that gets printed is
"Sort criteria AscdgDescndSubtotalGRAND TOTAL : X X PROJ" "
The abap list format is Z_100_500. Basically the report has 450 columns and hence we created this format.
I am not sure what this means. I have been advised by SAP to follow instruction on note 17895 - Adapting print list formats for customers however i cant fully comprehend point 5 of the note and I believe this is why it wont print. Has anyone adapted ABAP list using this note. Can you please let me know how i should go about printer initialisation mentioned in the noted.
We have checked everything however dont seem to get around the issue. Any ideas will be appreciated

No comments

Help HP LaserJet 600 Device type

Hello everyone,
I've had a problem finding the device type for the following printers:
- HP LaserJet Enterprise 600 M601n
- HP LaserJet Enterprise 600 M603dn
I've checked in HP web page, I've checked Note 8928 and still havent found the device types. Can anybody help me?
Thanks,
Beatriz

Hello,
Check the following link:
http://h71028.www7.hp.com/enterprise/downloads/HPPrinterSAP-DT2011.pdf
http://h71028.www7.hp.com/enterprise/cache/37011-0-0-225-121.html
You can use Device type ZHPLJCM1, and also you can try device type SAPWIN.
Regards,
David

CiscoWorks user options "device type groups|switch and Hubs"

Hi,
We are using CiscoWorks software to deploy new configuration to our network devices. Because our environnement is mixed about version of network devices we have to create a new netconfig job for each device model, because in some plate-forme configuration option, syntax maybe different of each other.
When I create a new netconfig job with my username under "device type groups|switch and Hubs" I have a list there of all plate-forme we have in our production environnement managed by CiscoWorks software. I know thoses group was'nt define by on of us and thoses are define by default in CiscoWorks software, but they are hiden by default per user basic.
We have a new one in our team, I had created his user name and password, but I can find the option where I can asked to make visible to him plate-form device type group as I have in my user configuration.
Also, is it possible to copy private define group to an other user without to make thoses as public ?
Thanks a lot !

Here,
is a view of what I have with my user
but in his profile he is only see
Device type Groups
     + Routers
     + Switches and Hubs
     + Wireless
if he clic on the plus sing to develop group "Switches and Hubs" he see all switches and hub managed by CiscoWorks software. I know He did not create Cisco Catalyst 2912 XL Switch and Cisco Catalyst 2924 XL Switch group in my profile. I know we have to modify an option in CiscoWorks per user basic to view those group, the person who where that option should be modifiy is currently in vacation, but he will need that option enable before our specialist will be back !
Thanks a lot !

Device type to be used for Zebra 220XiIII Printer

Hello All,
We are printing labels from SAP to the printer Zebra 220XiIII Printer using Adobe Print forms technology. When configuring the printer, we used the device type as PDF1. The print was fine in terms of data display and positioning of the text and barcodes but the issue is that it takes 30secs. to print each label. This was not acceptable as it is creating delays in Shipment.
To address the issue we changed the device type to LZEB3. The print was fast i.e., in 20 seconds the printer was able to print 5 labels but the font on the label is increased automatically because of which the data on the label is truncated.
Does any one have any ideas on what is the device type to be used and is there any specific font to be used?
Please note that we desinged the forms using ADOBE FORMS TECHNOLOGY. There are many notes in Service market place which are specific to Smart forms. Please come up with your ideas.
Regards,
Praveen T

Hi Florian,
Thank you for your response. We were able to fix the issue by changing the Device type to LZEB2.
For some reason YZB200, YZB300 and other device types which we found in the device type wizard did not work in our case. We did not investigate the reason as LZEB2 worked and we have time crunch
Regards,
Praveen T

WCS 7.0.164.0 Report by vendor (device type)

WCS 7.0.164.0
I have been asked to produce a client’s report that shows all different vendors (devices type). We have about 10000 users in our system on about 3000 APs (light version) I created a client summary report but encountered some limitations:
If I select any time period over 6 hours, I get the message “The report you are trying to generate contains more than the supported number of records (10000). Change the report criteria to generate a report with fewer records”
If I select a time period of 6 hours or less, I get the report including vendor statistics. Is there any way to differentiate within the vendors by device type? For example instead of the vendor apple, get apple-iPhone, apple-iTouch, apple-laptop, etc.
I would like the ability to create my own reports, by I don’t think it is possible on the Version I’m running. All reports can be customized up to a point, but you still get information you might not care for.
Thanks for any information to overcome these issues.
Jorge Jiles.

Hi Jorge,
It looks like such a level of granularity may not be achievable yet.
Should you need such a feature to be evaluated for potentially being included in future software releases, I would recommend to contact your local Cisco account team.
They should be able to follow up and submit a product enhancement request (PER).
Business units will evaluate PERs and, if feasible for the market, they may consider implementing such an enhancement in future versions of the SW/HW.
Regards,
Fede

Print Preview of smartform with device type EPESCP9

Hi all,
I have created a z smartform to print commercial invoice.
I am using dot matrix print Epson FX-2170 to print invoice.
For this printer the device type is EPESCP9.
So I created an output device having device type EPESCP9.
I have assigned the required Format type to the device type and the page format which is assigned in the smarform to the Format type.
But I am not getting any print preview of the invoice when I select this output device.
I am only able to get print preview when I select an ouput device having device type SAPWIN.
Please provide solution to get preview in device type EPESCP9.
Edited by: Vinod Iyer on Apr 24, 2008 6:08 PM

Hi,
1.I think You are assigned the Printer details in SPAD.
2.The page format and Printer settings are correctly done ,then it will come.But,the main problem is ,the page format is not supposed to match.Please check that page format in smrtform and Printer settings.
3.If posible see those settings in I18n also.
Regards,
Shiva.

Which device type support Unicode printing ?

Hi all,
Do you know which cascading font device types support Customer-defined true type fonts ?
I use HP LaserJet printer. I've imported ZSWINCF device type in to SAP system and installed some true type fonts required for my report. It's able to print Unicode text in ABAP List but unable in SAPScript/Smartform printing.
I also try to use ZHPUTF8 or HPUTF8, and install these fonts. But i've problem in printing out.
Do you know how to resolve this problem ?
Thanks,
Best regards,

Hi
see this OSS notes may be useful
OSSNote:960341
Symptom
In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
Other terms
CONVERT_OTF, SAPscript, Smart Forms
Reason and Prerequisites
The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
Example:
%Charwidth values from HP4300 HELVE 060 normal
/Widths
[ 278 333 500 633 633 1000 758 333 333 333 633...
Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
Solution
Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 12:44:06
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
OSS Note: 776507
Symptom
Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
Other terms
SAPscript, SmartForms, printing, device types, OTF
Reason and Prerequisites
Help required to choose proper fonts in a SAPscript or SmartForm
Solution
When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
1) The language version of the form used to produce the printout.
Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
3) The output character set of the device type
Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
4) The set of available printer fonts for a given device type
When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
Note on SAPscript/SmartForms Print Preview:
The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
Which fonts are suitable for a given language?
Language(s): Font family to use in a form:
Latin-1 (Western Europe/Americas) *******
DE,EN,FR,ES,NL,SV COURIER, HELVE, TIMES
 (LETGOTH, LNPRINT)
Latin-2 (Central Europe) ****************
PL, CZ COURIER, HELVE, TIMES
ISO 8859-4 (Baltic) *********************
ET, LT, LV COURIER, HELVE, TIMES
ISO 8859-5 (Cyrillic) *******************
BG, RU, SR, UK COURCYR, HELVCYR, TIMECYR
ISO 8859-7 (Greek) **********************
EL COUR_I7, HELV_I7, TIME_I7
ISO 8859-8 (Hebrew) *********************
HE COURIER, HELVE, TIMES
ISO 8859-9 (Turkish) ********************
TR COURIER, HELVE, TIMES
Simplified Chinese **********************
ZH CNHEI, CNKAI, CNSONG
Japanese ********************************
JA JPMINCHO, DBMINCHO, DBGOTHIC
Korean **********************************
KP KPBATANG, KPDODUM, KPGULIM
 KPGUNGSE, KPSAMMUL
Traditional Chinese *********************
ZF TWDPHEI, TWMING, TWSONG
Thai ************************************
TH THANGSAN, THDRAFT, THVIJIT
Arabic (Unicode systems only) ***********
AR ANDALE_J
Verify your output by examining the OTF data
When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
Goto->Display Requests->Settings
and choose
Display Mode: Raw
Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
//XHPLJ8000 0700 00000000001
IN04EALEXTEST_ZEBRA
IN05%PAGE1
OPDINA4 P 144 240 1683811906000010000100001
IN06%WINDOW2
MT0024401289
CP11000000E
FCHELVE 120 00109XSF100SF101110000067E X
UL +0000000000000
SW00067
CT00000000
ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
//XHPLJ8000 0700 00000000001
The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
IN04EALEXTEST_ZEBRA
In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
OPDINA4 P 144 240 1683811906000010000100001
The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
CP11000000E
Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
FCHELVE 120 00109XSF100SF101110000067E X
Header Data
Release Status: Released for Customer
Released on: 22.08.2005 09:57:20
Priority: Recommendations/additional info
Category: Customizing
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
BC-SRV-SSF Smart Forms
Reward points for useful Answers
Regards
Anji

URGENT: Smartform - Attaching Font to Device Type and Printing

Hello Smarform Gurus,
I have uploaded CORPOS font to SAP and using in SMARTFORMS. Whenever the PDF is called for invoice, it should print immediately.
When I open the smartform and then print, the printout is coming fine with CORPOS font.
Problem: When Invoice is created and PDF is called immediately, the prinout is not coming properly. It's because the printer device type KYOFS150 we are using does not support CORPOS. Pls let me know the options we have. We have also referred to SAP note 12462.
Thanks in advance,
Abhishek

Hi
U need to update the printer device type KYOFS150 or use another one supports that font
Max

Retro entires in HR Forms are not printed when using device type ZHPP3005

Hi All,
We are doing a HCM implementation. We are using HP P3005n printer and ZHPP3005 device type to print our HR forms. We are using ZCalibri font.These are smartforms. Everything was printing perfectly.
Then there were retro calculations made to these forms.Strangely, the forms doesn't display these retro entries in the print preview using ZHPP3005 device type. Only the retro entries throughout the form are not printing. All other entries get printed.
When we use device type HPLJIIID, we get these retro entries printed in our form however the format of the form gets changed.
Now, we want to use device type ZHPP3005 and get these retro entries printed. How would we achieve this? Is this a device type issue? Or, anything needs to be done in the smartform? Why is this issue?
Please help. Quick response will be appreciated. We are nearing our Go Live date and needs this resolved immediately.
Thanks in Advance.

Hi,
Check the assigned page format to your custom device type. Try to assign all the page format which are available for
HP*** which you gives you desired result.
Regards,
Vamshi.

Output different if Device Type changed from SWIN to HPLJ4

Hi,
I have a few problems here for my SAP smartform. Hope someone out there can help.
1/ I am using font: Helvetica for my smartform. I realized that the output (on Print Preview as well as the actual Print output) shows a different font if I chose Device Type: HPLJ4. If I choose my actual printer HP4250 as the Device Type, the font is the same as that shown for SWIN as Device Type, but the spacing is a bit different. Is there any way I can make sure that the font type, spacing will not differ for a different Device Type?
2/ The reason why I am not printing using SWIN as Device Type (which will ensure consistent output even if printer is changed) is becoz I need to use the PCL5 print control commands to rotate a certain section of text in my smartforms- which is only possible on HP PCL5 printers. Is there any way I could rotate text in smartforms without print commands and yet I can still use SWIN as Device Type? (pls do not suggest creating a bitmap picture for the text).
In short, I need to know how can I ensure consistent output (same margin, same font, same font spacing) even if a different printer is used (any Device Type I can use?) and at the same time, enable me to rotate a certain section of text in my smartform(180 degrees)?
Thanks very much for any help.

Hi,
For the first question, generally the output (spacing etc) changes when you change the device type. So you need to adjust the alignment according to your output type.
Thanks,
Nagendra

Output Device with Device Type SWINCF not send to printer

Hi,
We're on SAP R/3 (version 4.7 w/ supporting unicode). In order to display Vietnamese Characters in smartforms, we implement SAP note 812821 to get new device type SWINCF. Everything works find on print preview but when print out form the output is crap. we can not see anything out except unreadable characters.
More information:
- Host Spool Access Method: U (Print using Berkeley Protocol) there is no access method G
- Host printer: "(it is not __DEFAULT)
Please anyone has got this issue help us.
Thanks so much.

I guess changing access method to your network printer may solve the print issue, but it may give you some alignement issues. Any how before you try changing access method, goto spool and do analysis on form change in Raw format. Steps given below.
1) go to transaction code SP02
2) Identify the spool request that is printing vietnamese characters.from menu, goto>display request> settings
3) change the display mode from graphical to raw, enter
4) display the output of the spool, now you will see raw format of your output.. now try to identify, what font family is it using during print of vietnamese characters, Note: in raw format FC --> Font change.
5) Make sure the font family that is printing vietnamese characters hold all vietnamese characters.
Regards,
SaiRam

How to obtain a device type id?

Hi all -
Sorry if this is a repeat question, but I'm trying to figure out if there is a J2ME call to obtain the type of device the application is running on, such as "Nokia 2600" etc...I would like to change the app functionality based on what type of device this is...Any thoughts?
Thanks!

Hi Keshav.
Device type SAPWIN Format ZEMP i found following option now i all details stat to display on line 14 so i have to set in
Start of line but i don't know how to write there?
Printer initialization
Reset after exit
Cover page
First Page
Start of even page
Start of odd page
Start of page
End of first page
End of even page
End of odd page
End of page
Start of line on an even page
Start of line on an odd page
Start of line
End of line on an even page
End of line on odd page
End of line

SPAD: Device type to be selected for 'HP Laser Jet P2055dn'

Hi,
Recently we were asked to configure 'HP Laser Jet P2055dn' as the cheque printer in our landscpe.
While configuring the printer, I have a doubt of the Device Type to be selected in SPAD settings.
Could you please suggest me which Device Type to be selected for this printer
Below are the details of the Printer provided o me by the infrastructure team:
HP Universal Printing PCL 5: 'HP Laser Jet P2055dn' with a Troy badge on it
Regards,
Manish Sharma

Hello,
Try using HP Laserjet 4 series PCL-5 driver for the printer you have mentioned.
Otherwise you can customize your own drivers with needed controls, formats, etc macthing the cheque printing.
Regards,
Yoganand.V

Device type creation

Similar Messages

Maybe you are looking for