Device type for printer LOCL

Hi everyone,
Do you know a device type for LOCL that will be suitable for all the formats? Our users are using printer LOCL. We Had an issue before that the font of the printout is larger than the usual so we changed the device type. Recently, another user complained because the font of his printout is smaller than the usual. These are two different users with two different types of output devices but both are using printer LOCL. A change in the device type will correct one issue but will raise another. Please help. Thanks.

Dear Sheryl,
Check if you maintained value '__DEFAULT' for Host Printer under Access Method.
Also, Device Class is Standard Printer.
Regards,
Naveen.

Similar Messages

  • Device type for printer types

    Hello,
    Could you please tell me the device type for these 2 SAP printer types:
    HP Color Laserjet CP1515n
    Triumph adler DC 2218
    I searched for these, but without any success.
    Thank you for your help in advance,
    Noemi

    Hi,
    You can refer to the SAP note 8928 and solve your problem.
    Good luck
    Tao

  • Search device Type for Printer Ricoh Aficio BP20n

    Hi does anyone knows a Device type for the printer
    Ricoh Aficio BP20n
    I looked the sNOTE 8928 which routes me to sNOTE 485240.
    but "485240" does not exist.
    Notes with device types for Gestetner and Savin are not listening the BP20n printer.
    "Savin" is a US subsidiary company from Ricoh.
    greets chris

    Hi Christian,
    That's strange, I could see note 485240: Device types supplied by SAVIN
    <a href="https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E">https://websmp204.sap-ag.de/form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=485240&_NLANG=E</a>
    Symptom
    The printer manufacturer SAVIN supplies SAP with the following device types. These device types are produced, maintained and supported by Ricoh.
    Should you encounter problems while you are using these device types in SAP, do not direct them to the SAP Support hotline. Instead, use the support addresses of the SAVIN Corporation listed below.
    Other terms
    Device type, SAVIN
    Reason and Prerequisites
    Detailed information on the SAP device types supplied by the printer manufacturer SAVIN.
    Solution
    The following products are supported by the SAVIN device types:
    Multi-functional Devices
    - 4015/4018/4018d
    - 8016/8020/8020d
    - 9922DP/9927DP *1
    - 2522/2527
    - 4022/4027
    - 8025/8030
    - 8025e/8030e *2
    - 9935D/9935DP/2035DP/9945DP/2045DP *1
    - 2535/2235/2545/2245
    - 4035/4135g/4045/4145g
    - 4035e/4135eG/4045e/4145eG
    - 8035/8045
    - 8035e/8035eg/8045e/8045eg *2
    - 2055DP/2070DP Type700
    - 2555
    - 2560/2575
    - 4051/4060/4075
    - 8055/8065/8075 *2
    - 2085DP/2105DP Type850
    - 2585/25105 Type850
    - 4090/40105 Type2105
    - 8090/8110/8135 *2
    - C2408/C2524/C3210/C2532
    - C2525/C3030 *2
    - C2820/C3224/C3828
    - C2410/C3210e
    - C2824/C3528/C4535
    - C3535/C4540 *2
    - C6045/SDC555
    Printers
    - SLP26/SLP26n
    - MLP26/MLP26n
    - MLP25/MLP25n
    - MLP28/MLP28n
    - SLP32
    - MLP32/MLP35n
    - MLP45
    - MLP145 *2
    - CLP1620
    - CLP22
    - CLP1036
    - SLP38c
    - CLP28
    - CLP35
    - CLP17
    - CLP18
    - CLP831
    - CLP26DN
    - CLP27DN/CLP31DN *2
    - MLP75n
    - MLP175n *2
    - CLP128/CLP135
    SAP device types ZA001vvv (Latin-1)/ZA002vvv (Latin-2)
    These device types support the above-mentioned printers and multi-functional devices. You can download them from the Internet sites listed under "Support".
    Latin-1 (Western Europe) supports the following languages:
      English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Norwegian, Danish, Finnish
    Latin-2 (Eastern Europe) supports the following languages:
      Hungarian, Polish, Czech, Croatian, Romanian, Slovak, Slovenian
    The ZA001vvv/ZA002vvv device types support the following functions:
    Input bin / Output bin
    Stapling & Hole punching
    Paper type
    Duplex printing
    Job offset
    Resolution
    Number of Copies & Collation
    EconoMode / Toner saving
    Auto tray change/switching
    Edge enhancement/Smoothing
    Paper size
    Orientation
    Character set / Symbol set
    Color printing
    Slip sheet
    Edge-to-edge mode
    *1: Does not support bar code printing and OCR typefaces.
    *2: Supports Unicode printing.
    For more information, download the customer documentation from the Internet sites listed under "Support".
    Support:
    Telephone: 1-800-RICOH(74264)-38
    Internet: http://www.savin.com/
    Download: http://www.savin.com/savin/savin_com.nsf/SupportDrivers/

  • Need proper device type for Xerox printer "WorkCentre 5755. 5775, 5790"

    Hi ,
    Could anybodies suggest the proper device type for *"Xerox printer "WorkCentre 5755. 5775, 5790".
    Thanks
    Regards
    Priyabrata Mishra

    Hi Sujit,
    I need he information about the device types for these printer models
    Work Centre 5755/5775/5790
    Please suggest if there is any compatible device types available in the given link by you. I have already downloded all the device types from this link but there is no device type information for these mentioned printer models above. Please suggest
    Thank you so much for giving your valuable time
    Regards
    Priyabrata

  • No authorization for printer "LOCL"

    Hi ,
    I have Support role for my USER.
    Iam trying to schedule a process chain in Background. so it will ask for  "OutPut Device name" . i given LOCL
    Then its given a message : No authorization for printer "LOCL" .
    then i run the SU53 TCODE to see the log details :
    Authorization check failed
    Auth. Obj.S_SPO_DEV Spool: Device authorizations
    Object Class BC_A Basis: Administration
    can anybody tell me why this has happened.
    Thanks,
    Agni

    Hi ,
    From SU01 find out user profile attached to the user .
    Goto PFCG -> Put user profile there -> Change authorization data -> Include object manually -> Put S_SPO_DEV and put enter->Here specify printer user can access . Save profile .
    Hope that helps.
    Regards
    Mr Kapadia

  • Device type for HP Officejet 7700

    Good Day;
    I have a problem with SAP priniting on HP officejet 7700(color All in one). Its not printing with SAPWIN default . I used device type HP laser jet 1160 and its printing fine( only black and white).
    I am looking to get the colour print out. I have searched for getting the matching device type for this printer , and am not winning.
    I have the SAPNOTE mentioning the list of SAP supported printers and device type ,  this printer is not in the list.
    Your help is highly appreciated .
    Regards
    Seethy

    Hi ;
    I tried to create a device type using SPAD and just copy the parameters and print controls from other device type HP laserget 1160. But its not working. Should I copy the drivers from OS level? Please assist me in creating a new device type.
    Your help is much appreciated.
    regards
    seethy

  • Device Type for EPSON TM-U220

    Hi All,
    We are using EPSON TM-U220 dot matrix printer. Can anybody tell me which device type should be used for this? How to find a appropriate device type for a printer? Where we can get this info? I have selected EPESCP and its not printing the way how its appearing in the preview. I tested with SAPWIN too, same problem I have faced with SAPWIN too.
    Thanks in advance.
    Hernando

    is correct, the printer is set up in the Tx SPAD, we tested several device types, but none has proved effective, as reported, the preview is fine but when printing it is so wrong. My question is, If you have used this type of printer, if so what kind of device type are you used?
    Thanks
    Edited by: Hernando Enrique Polania Cadena on Dec 30, 2008 10:00 PM

  • Creating a device type for Chinese Simplified

    Hello Gurus ,
    i have a question regarding Device types. We recently bought a Chinese Simplified Font Flash USB and we installed it on an HP Laserjet 4515. In windows mode the printer is printing chinese correctly . But in SAP i didnt found how to make it print. I was searching for OSS notes but i couldnt find something relevant.
    So i copied the device type for the printer , which is HPLJ4000 and i set the character set to 8416 which is (Printer HP LaserJet PCL-5 series Simplified Chin) .
    Unfortunately this didnt work , i also tried other char sets but the problem remains . Did anyone had this problem before ?
    Best thanks for an idea !
    regards,
    david

    I'm not really sure if you can transport it... but you can export it to file and imported in the target system
    SPAD -> Full Administration -> Device Type -> select the device -> Edit -> Transfer -> Export.... same in the target system but Import.
    Hope that help.
    Regards
    Juan

  • Creating Format type for printing ALV output.

    Dear Friends,
        I am using a format type for printing ALV output print which displays 65 rows and 255 columns on DINA4 page. I want to create a format type which will print 65 rows and 310 columns on 'LEGAL' page format .
    So plz suggest the ways along with help links if any.
    Regards,
    Madan.

    Hi Mandan,
    As long as I know the maximum column for printing is 255.
    Might be you can split your output into 2 rows...
    Regards,

  • Output type for printing payment voucher

    Dear freinds,
    Can any one tell me what is the output type for printing Payment Voucher.
    Thanks & Regards,
    Santosh.

    For FI config will be done by the functional team you may not see it in NACE tcode, do consult your functional consultant...
    Close the thread once your question is answered.
    Regards,
    SaiRam

  • Trouble changing paper type for printing

    I downloaded Photoshop Elements 11 to a new computer (with much more memory and speed that old computer) but now Photoshop does not work as well. When I  try to change the paper type for printing, the setting is stuck at "plain paper" and there are no other options available. Any ideas on how I can fix this problem?

    It sounds like a printer driver issue, not a PS issue. Can you update your printer driver on the new computer?

  • Device type for Toshiba printer TECB431

    Hi,
    I have to print DHL labels onto printer TECB431 (Toshiba). I used SAPWIN device type to configure it but the problem is that printer is not feeding the paper whilst multiple page are to be printed. If the spool has only one page, than it prints fine.
    Can anybody please suggest the correct device type to be used with this printer.
    Thanks in advance !

    Hi,
    As per your query pls check the same in your windows machine. If you are getting cont. printing on windows machine then you will get the same in the sap also. Pls check the same configuration in other printer who is installed in your sap and working fine. This is realted to printer configuration or installaiton configuration in SPAD.
    Anil

  • URGENT: Smartform - Attaching Font to Device Type and Printing

    Hello Smarform Gurus,
    I have uploaded CORPOS font to SAP and using in SMARTFORMS. Whenever the PDF is called for invoice, it should print immediately.
    When I open the smartform and then print, the printout is coming fine with CORPOS font.
    Problem: When Invoice is created and PDF is called immediately, the prinout is not coming properly. It's because the printer device type KYOFS150 we are using does not support CORPOS. Pls let me know the options we have. We have also referred to SAP note 12462.
    Thanks in advance,
    Abhishek

    Hi
    U need to update the printer device type KYOFS150 or use another one supports that font
    Max

  • Device type and print options

    Hi all,
    The device type HP LJ 4350 enables print options and allow us to set which paper tray is to used in a specific form.
    However, our usual supplier does not sell this device type anymore.
    Does anyone know another device type that could allow tray configuration in the SPAD transaction?
    Thanks for your help.

    Hi,
    Take a look at SAP note #1049778. For recent releases, the device type HP4350 should be already available in transaction SPAD n the system.
    Also as per SAP note #1049778, most of the new device types that were developed within the SAP Printer Vendor program (SAP note #1130927) support the new print options.(see SAP note #1103422)
    Regards,
    Aidan

  • Device type for IBM Proprinter XL III

    Hi
    Can anybody tell me what is device type to be selected for the PRinter IBM Proprinter XL III
    Right now when i am printing it comes some garbage and some proper characters.
    Thanks in advance

    Is it a Line Printer?
    I found this link a long time ago... it might point you in the right direction,
    https://unebapps01.nebraska.edu/slugo/pubkb.nsf/50b3ab1ea706e0f886256798005a7505/f321eec40338798986256e6f006edada?OpenDocument&ExpandSection=1
    Regards
    Juan

Maybe you are looking for

  • How to Send Idoc Acknowledgements back to Http sender (Http to Idoc)

    Hi I have scenario: Http To Idoc first requirment: i need to map xml file come from HTTP Sender to Idoc (SAP system), and need to send Idoc acknowledgements/status back to Http sender. second requirment: while mapping COM Xml file come from Http to C

  • MOVED: Driver Stopped Responding MSI 290 Gaming Edition 4G

    This topic has been moved to GAMING Graphics Cards. https://forum-en.msi.com/index.php?topic=254075.0

  • Prores 422 to H264 Mp4 to get the greatest size reduction

    Hi all, I have a 90 minute ProRes 422 PAL sequence that needs to be delivered as both a SD DVD and an Mp4 for Internet publishing. After exporting the timelin as a Quicktime movie I've used Toast in the past to make a DVD using the best settings and

  • Error 3004

    I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disa

  • How do I downgrade to iOS 5 from iOS7!!!

    I had a sinking feeling iOS7 was going to turn out badly... But still I foolishly updated my iPad 2. Now I feel like an idiot because of course it totally fubar'd my iPad not to mention when it does work it is an absolutely ATROCIOUS OS... My god...