Device will not join in Profile Manager

Forgive me, as I could be being very silly. But really would appreciate some help here.
I am attempting after installing Mavericks Server to join a device (iMac intel, running OSX Mavericks) via profile manager.
Everytime I go to myserver/mydevices on the iMac I install the trust profile and then I click the blue Enroll button. However, this is where the issue arises. The device will only appear in Profile Manager as a Placeholder - it will pick up the name of the iMac and it's serial number, but it will only be a placeholder not a fully managed device (I do not get the options in myserver/mydevices to wipe or lock etc. and the device will not appear in there). I am logging into the local admin account of the iMac - and have also tried it as a network account. STILL don't work.
Could anyone shed some light on what the issue could be here?
The host machine will join fine (I did this as a test).
Thanks in anticipation! This is a niggly issue which is driving me MAD!

Hello,
I know how it feels, this piece of crap was driving me MAD too.
I had the same problem then you, the only way I found is to reinstall a clean copy of Mavericks with server.app and restart the whole thing.  For an unknown reason, i can now enroll my devices and manage them.
Good luck and have a nice day, and dont get crazy with this ****, it isnt worth it.
Pierre

Similar Messages

  • Firefox will not start and profile manager will not start

    This has happened on two accounts on my laptop. I am running windows 7, 64 bit and firefox 18.0. Firefox had been running on this machine for several years without incident, but suddenly when I try to start firefox, it will not start. The little wait icon spins for about a second then disappears without starting firefox. Other browser will start and run. I reboot and when I click on the icon to start firefox nothing happens. I tried to start the profile manager as seen in the knowledge base, but nothing starts either. I switched to another account on this computer and firefox started and ran for about a week, until today where it just stopped working. I have not tried to reinstall firefox as the message boards say this will not help. Any ideas?

    Thanks for your help. I had tried starting Firefox in safe-mode before I posted this request, but it did not work. I tried to restore the system to an earlier version, but that made everything worse. Two accounts were unusable and one sort of worked, so I reloaded the operating system and now firefox works, for how long, I don't know. But thanks again for your suggestion.

  • MacBook will not join Airport network

    I am flummoxed. My MacBook will not join my Airport Extreme network. It was fine this morning. I have restarted the MacBook. I have restarted the Airport base station. My iPhone is connecting to the network fine. My TV is connecting to the network fine. My G4 is connecting to the network fine. So, it appears there is some issue with the MacBook itself. Any ideas what could be the issue?

    Dr. Kellie wrote:
    I am flummoxed.
    Are you a Nero Wolfe fan?
    My MacBook will not join my Airport Extreme network. It was fine this morning. I have restarted the MacBook. I have restarted the Airport base station. My iPhone is connecting to the network fine. My TV is connecting to the network fine. My G4 is connecting to the network fine. So, it appears there is some issue with the MacBook itself. Any ideas what could be the issue?
    First, either update your profile or your OS to 10.5.6. There have been many bug fixes since 10.5.2 and some WiFi updates require the latest Leopard version.
    That being said, check your network preferences.
    Do you have a rational IP Address?
    If you are using an encrypted WiFi, you can temporarily turn off the encryption and see if the MB can join the network. If so, it's an encryption issue. If not, turn the encryption back on and we will have to look elsewhere.
    BTW, you should be using WPA since WEP has long ago been compromised and is useless, but thats a side thing right now.
    On the MB, I would run disk utility and repair permissions for starters.

  • Our service upgraded to 4g but now my Mac computer will not join the network, It sees the network but will not join

    Our service just upgraded to 4g. Now my Mac computer will not join the network. It "sees" the network but will not "join"

        Hi Hojo38,
    That's not good! What happens when you attempt to make the connection? Do you receive an error message? What device is the computer making a connection to? Send details please.
    Thanks,
    PamelaF_VZW
    Tweet us @vzwsupport

  • After upgrade attempt for 8310, device will not restart -- only blinking red light

    Problem: I tried to upgrade the device software to 4.5, and now THE DEVICE WILL NOT RESTART AT ALL. Not with a hard reset. Not using the SIM and battery from my 8310 and putting it in hers. Nothing. Just a red light that blinks in a pattern: two quick blinks, then a pause; two quick blinks, then a pause, etc.
    Background: This 8310 had vers. 4.2.2 device software, and something like 2.6 on the desktop. I downloaded/upgraded to 4.6 for the desktop and 4.5 for the device from the AT&T site. The Desktop manager prompted me to install the new device software... looking good. After several minutes, I got an "unknown error" message and it stopped the install.Following a support article, I uninstalled reinstalled both updates, but then the problem occurred: no NOTHING happens on the device screen at all, just the blinking red light when the device is plugged in.
    The AT&T store tells me this is about the tenth "dead" Curve he's seen in about a week, apparently all occurring when folks have attempted a software updgrade. Any thoughts/help to offer?
    Please help!
    Solved!
    Go to Solution.

    Check this instruction:
    http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry

  • I purchased a Holux M-1200E Bluetooth GPS Data Logger.  The device paired with my laptop just fine so I know it is working right.  The device will not even show up on my iphone or ipad to pair via bluetooth.  Is there a way to pair without jailbreaking???

    I purchased a Holux M-1200E Bluetooth GPS Data Logger.  The device paired with my laptop just fine so I know it is working right.  The device will not even show up on my iphone or ipad to pair via bluetooth.  Is there a way to pair without jailbreaking???  I haven't had any trouble to date pairing any devic with my iphone or ipad, this is ridiculous!!!!  Is there a way to update my bluetooth settings on my iphone 4s to be able to have this device be recognized???  I love my apple devices, but this is very frustrating.  I bought this Data Logger for a specific purpuse to help out with my Search and Rescue volunteer activities, and I really need help with this!!!  I am hoping apple will help me!!!
    Thanks,
    Melissa

    melissafromlenexa wrote:
    That is not the right device, it is the
    Holux
    M-1200E Bluetooth GPS Logger
    I looked at the same sight for that and it does not say that.  This is the first time I have posted a question, you don't have to be mean about it.  I am trying to get this to work for a good cause. 
    It may be the best source of assistance is the manufacturer of the device. I suspect you will need a specific app for the iPhone to get it to work, but the site is rather ambiguous about that.

  • How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    How come whenever i plug my iPhone 5 into the computer the device will not show up on my itunes.  This is the first time that i have done it since i updated to iOS7 and before i had no problem but now it just wont work.

    Hi Celia51510,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    I can't tell from your post if you are using a Windows or a Mac Computer.
    Try deleting the iTunes application and redownloading the version you need below:
    iTunes 11.1 Download for Mac
    http://support.apple.com/kb/DL1614
    iTunes 11.1 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    Cheers,
    - Judy

  • I cannot get my ipod touch or iphone to be recognized by Itunes on my mac mini. Only when i download itunes each time afresh, will it show up the first time. Then these devices will not be recognized at other times. Is it because i am not uninstalling it

    I cannot get my ipod touch or iphone to be recognized by Itunes on my mac mini. Only when i download itunes each time afresh, will it show up the first time. Then these devices will not be recognized subsequently. Is it because i am not uninstalling itunes before I download it? Surely this is a basic thing, ie that my devices need to recognize each other?

    After you dry the iPod:
    How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
    Connect the iPod to a charging source overnight and then try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    If iTunses can see the iPod you can backup the iPod
    iOS: How to back up
    http://support.apple.com/kb/HT1766and copy media from the iPod
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    If iTunes does not see the iPod then its contents are lost

  • Ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either.  Any suggestions?

    ipod touch is not recognized by itunes and i have executed all steps in the apple suggested troubleshooting, the device will not reboot either.  Any suggestions?

    Does it light up at all? If not, you could have a battery issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Hello i have a  an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of  version.it is important that i update my i Phone by itself not with iTune . after that my device can not  join to wifi to internet but another

    hello
    i have a  an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of  version.it is important that i update my i Phone by itself not with iTune . after that my device can not  join to wifi to internet but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem  is remaining .is possible that to return to older version? if there is any solution share with me and i be very thankfulness of you.tanks again 

    It is not possible to downgrade to an earlier version.
    Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
    And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

  • Hello i have a  an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of  version.it is important that i update my i Phone by itself not with iTune . after that my device can not  join to wifi to inter net but another

    hello
    i have a  an iPhone 5 .i updated it in the end of summer or begin of fall because i forget the number of  version.it is important that i update my i Phone by itself not with iTune . after that my device can not  join to wifi to inter net but another of app works properly and cellular can join to internet . i reset my i phone in the setting . general section but my problem  is remaining . if there is any solution share with me and i be very thankfulness of you.tanks again

    It is not possible to downgrade to an earlier version.
    Have you tried the tips on this help page? iOS: Troubleshooting Wi-Fi networks and connections
    And you dont need iTunes to update you're device. You can update it OTA in Settings > General > Software Update

  • TS4009 storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity.  Device will not allow extra downloads..?

    storage upgrade to iPod appears to be activated, but still not able to 'use' the extra capacity.  Device will not allow extra downloads..?

    Welcome to the Apple Community.
    Purchasing additional iCloud storage will not give you additional storage on your device.

  • When I connect my ipod touch tomy computer it says that the device will not work because the Apple mobile device hasnt been activated?

    Why does a meesage pop up when I connect my iPod touch saying that the device will not work because the Apple mobile device hasn't been activated?          

    Refer to this article to restart AMDS:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567

  • Driver for Mobile device will not install with installer

    Uninstalled EVERYTHING to do with iTunes/Apple/updater. Reinstalled several times and the mobile device will not install.
    I WANT MY MONEY BACK. I HAVE NO PHONE SERVICE.

    Hi jngs & amyjo - have u sorted problem? I'm having exactly the same problem with my nano.During first installation of software, would not recognise new hardware when connecting ipod to the pc for formatting. I've uninstalled and reinstalled using both CD that come with nano and also latest software update available on itunes...but still will not recognise hardware when nano connected to pc. Have tried with several 2.0 ports - these r all ok cause i've connected other devices to them and they work fine. I've tried connecting nano to a friend's pc - he all ready uses a ipod (not nano) - same problem "does not recognise new hardware". The usb lead is fine as the nano charges when connected to port. Am planning to take nano back to Apple store in Blue Water (outside London) nxt wk. Why is it that things don't work even when you follow instructions to the letter!!!

  • Itunes will not display , although task manager says it is on

    itunes will not display , although task manager says it is on, by double clicking icon, it will ask , do you want itunes to make changes, I say yes and nothing appears afterward as if it is already on but no display of itunes, so i cannot use iphone or ipad to pc

    Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles.<br /><br />
    NOTE: Establish a habit of exiting/closing Firefox with Firefox button > Exit or File > Exit to allow an orderly shutdown of Firefox and closing of all of the files that Firefox has open.
    #Stop the Firefox process:
    #*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
    #*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
    #*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
    #Why Firefox may hang:
    #*[http://support.mozilla.org/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
    #*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
    #*[https://support.mozilla.org/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
    #Use Firefox Safe Mode to find a problem with an Extension or Plugin:
    #*Don't check anything when entering Safe Mode, just continue
    #*If the problem does not occur in Safe Mode it is probably an Extension or Plugin causing the problem
    #*See:
    #**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
    #**[http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    #**[http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    #**[http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Maybe you are looking for