Device won't start, even after charging (WT8-B-102)

I recently bought a Toshiba WT8-B-102 and i have some problems with it.
First of all i couldn't install the BIOS update for some reason, but that isn't a huge problem for the tablet works fine
but now i can't start it anymore. yesterday i had the same problem, left the Tab alone for a while, (on the charger) and after that it didn't start/boot. half an hour later i tried again (after taking it of the charger) and then it started, but today it won't start at all. Even if i charge it for some hours, then try it again, try to start it while being charged, etc. This is not good right?
I also don't see some led burning or any other sign when i attach it to the charger. Any ideas or help guys?
Thanks

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Similar Messages

  • Acrobat Pro for Mac won't start, even after restarting the machine.  Any suggestions?

    Acrobat Pro for Mac won't start, even after restarting the machine.  Any suggestions?

    Hi Patrick,
    Can you please mention the version of Adobe Acrobat that you are using and on what OS version. Also mention whether this problem has started recently and was running fine earlier or is it a fresh install and has never worked for you.
    Have you tried uninstalling and reinstalling the product after you started facing this issue.
    -Shashi

  • Motion 4 won't start - even after reinstall

    Yesterday, I discovered that Motion 4 wouldn't open or save files. The menu just wouldn't open. Save As didn't work either. I tried to delete the prefs files, but the result was that Motion didn't open at all when I tried to launch it. I then reinstalled Motion from the original DVD's, restarted - and the same problem is there: Motion won't open. The spinning wheel goes forever, and there is no indication that Motion is able to launch. - Any suggestions? I have the lates versions of MacOSX 10.6 6 and Motion (FCStudio), I have 12 Gbyte RAM and I am using the iMac 27 inch 2.8 GHz Intel Core i5.

    Sorry if my explanation wasn't clear enough. I used the suggested FCS Remover software (see above) to remove the apps, I then repaired rights, restarted the Mac, installed the complete FCStudio from the DVD's, ran the Software Update, restarted the Mac, tried to start first FCP, then DVDStudioPro, then Compressor - with the same result: none of them would load properly. The spinning wheel turned forever.
    Later created a new user account (with Admin rights) on the Mac, switched to that user and tried to start FCP. The same result: the app won't start.
    I started the apps from within the Applications folder, not from the Doc.
    I was able to talk with a tech guy at Apple Support today, and the only thing he could do was to send me a document with instructions about deleting prefs. I already did that, with no result.
    I guess I need help from an experienced support person to go through my Mac and find the reason behind this sudden and strange behavior.

  • Illustrator CS4 won't start, even after reïnstalling.

    I reïnstalled the whole Suite but Illustrator still won't start. When I try to open Illustrator the orange windows pops up and you see that parts are being loaded but then it shuts down and is gone. I'm on Windows8.

    it can't hurt to try downloaded installation files.
    again, uninstall and clean before installing.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.<

  • Power Mac G5 won't start even after Repairing Disk and Permissions

    I Repaired the Disk first by booting from the install disk and it did repair 1 item and then tried to reboot into safe mode to repair permissions and it didn't boot. I restarted by booting from the install disk again and repaired permissions and it seemed to repair alot of stuff. But it still won't start up.
    I get stuck at the blue screen with the apple logo above a status bar that never moves.

    Hi Larry,
    Appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120

  • Firefox won't start even after disabling all plugins and reinstalling

    Two days ago I updated my graphics card drivers (nvidia geforce) and it had some problems. I went into live chat support and after reinstalling some files it worked. Right after that Firefox wouldn't open, prompting me to restart or close. Hitting restart would take me the same place. It only opened in safe mode, where I deactivated the plugins related to the graphics card, and Firefox started normally.
    Yesterday it didn't start again, even with those plugins deactivated. so I started in safe mode and deactivated all other plugins and it started. Today happened the same again but now I didn't have anything to deactivate so I could never start it. I unistalled and downloaded the installation file again and installed. The problem remained.
    I went to the page Firefox crashes - Troubleshooting and filled in the crash report to mozilla crash reports page with the ID: 6cf4a525-9152-46f9-96f2-7ef282131023
    The problem looks like it has something to do with the file mswsock.dll, but I'm affraid of deleting it.
    Please help me.
    Thank you,
    Pedro

    hello pedro, this crash is caused by the "Media Accelerator" part your nvidia graphics driver. please see if you can selectively disable it in the nvidia control panel or even uninstall it. otherwise please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in ''firefox > options > advanced > general''.

  • MacBook not starting even after charging

    MacBook not starting after  charging

    Will the MBP operate with the power adapter attached?  If not, make an appointment with an Apple store genius bar.
    Ciao.

  • Mac G5 dual won't start, even after replacing power supply

    I was having an issue with the mac starting, getting the bong and then it would run for a while and then shut down. I tried resetting pram and then replaced the power supply.  It still does the same thing.  Help.

    OK, good news/bad news...
    We found the problem, but Disk Utility & fsck cannot repair it, it's either erase everything on the drive, or try DiskWarrior...
    Your best bet is DiskWarrior, you need the CD/DVD though.
    http://www.alsoft.com/DiskWarrior/
    BTW, you might enjoy these DiskWarrior review/recommendations...
    http://discussions.apple.com/thread.jspa?messageID=9645801&#9645801
    http://discussions.apple.com/thread.jspa?messageID=10541019#10541019
    http://discussions.apple.com/thread.jspa?messageID=11918925&#11918925
    http://discussions.apple.com/thread.jspa?messageID=12684129#12684129
    http://discussions.apple.com/thread.jspa?messageID=12744794&#12744794
    http://discussions.apple.com/thread.jspa?messageID=12912879#12912879

  • 11" MacBook Air won't start even after SMC reset attempt

    I press the power button on my Air and the Apple sound chimes, a dimmed grey-black screen appears and nothing else.  I have combed through the communities and the suggestion was to do a SMC reset. I followed the instructions exactly and nothing changed.  I initially plugged into my Thunderbolt monitor and ultimately plugged into power with the standard MagSafe cord. Neither changed the outcome.  I have had this Air since November 2014.
    One of my questions about the SMC reset was how could the device recognize actions while the computer is powered off?
    Please help me!
    11" MacBook Air, OS X Yosemite (10.10.2)
    Resetting the SMC on portables with a battery you should not remove on your own
    Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

    You have to take the computer to the Apple store to have it checked out.
    chasoni531 wrote:
    One of my questions about the SMC reset was how could the device recognize actions while the computer is powered off?
    One of the keys you press when resetting SMC is the power button.

  • I downloaded ios7 and now some apps won't open even after resetting them. Don't won't to lose my info by deleting them and starting over. What to do?

    I downloaded ios7 and now some apps won't open even after resetting don't won't to lose my info by deleting and starting over.. What to do?

    Try close all inactive apps
    1. Double tap the home button to bring up the multi-tasking view
    2. Swipe up on the screenshot of the app you want to exit.
    3. The app will fly off the screen

  • Hi, I need help. My iPad 2 won't start even if I already went through pressing the home and start buttons simultaneously. I also tried charging the battery for more than 30 minutes. Still won't power on. what should I do?

    My iPad 2 won't start even if I already went through pressing the home and start buttons simultaneously. I also tried charging the batteries for more than 30 minutes (done this procedure twice) but it won't still power on. What should I do next? Could it be a hardware issue then?

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • HT1657 Was watching a movie on my iPad2 and it just stopped, thought it was a low battery but even after charging itbto 100% the movie won't play anymore. It shows the movie chapters but says the movie content can't be played. Please advjise

    Was watching a movie on my iPad2 and the movie stopped playing, I thought it was because of a low battery but even after charging the battery to 100% it still won't play. I can bring up the movie &amp; all the chapters but when I press play it says movie content can not be played. Please advise. Thanks!

    I am having almost the same problem, with the same OS, iTunes versions, and kids waiting to watch their favorite movie (Frozen).  I am (trying) to play the content on the computer, and hooked up to Vizio TV and external stereo.
    The video will display on the TV, but the audio will only play through the laptop. The movie will still play with both audio and video on the laptop.
    In researching this morning, it seems that i need to purchase a new TV and stereo that are HDCP "compliant" (NOT just compatible). Folks are also complaining that the same "won't play" issues directly on Mac hardware. 
    I could not find any current software workarounds or patches (Apple seems silent on this as a "problem").
    Upgrading hardware is insulting and (frankly) impossible.  Why should I get new hardware that works perfectly well? 
    I was going to get an Apple TV for Christmas, although not if new products cannot be used with my current hardware.   I would rather go back to all Microsoft hardware and software than constantly deal with troubleshooting Apple hardware and software.
    I'm going to uninstall iTunes v 12 and reinstall v 11 to see if that works.
    Please post if there is a solution!

  • My iPhone 5 has totally died!! Even after charging it all night it won't come on!!

    Help!! My phone has totally died, black screen even after charging it using two different chargers!!

    It may be the charging cable that is faulty. Try another one.

  • HOW TO FIX HD AUDIO/UNKNOWN DEVICE/DEVICE WON'T START LENOVO H320 Win 7 64-bit

    Fix for - HD Audio devices won't start or you can't load correct driver. Lenovo H320 - Win 7 64-bit I-3 processor. 5 series/3400 chipset
    Here is a working procedure to fix the problem when you install windows 7 64-bit and can't get the correct drivers installed for the HD Audio devices 1)Realtek AC97 HD Audio device id = HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_17AA3604&REV_1001
    and 2)Intel HD Audio device id = HDAUDIO\FUNC_01&VEN_8086&DEV_2804&SUBSYS_80860101&REV_1000 Regards >>> Sucromatic
    For an IBM LENOVO 320 with Windows 7 64-bit Home Premium Version download these drivers to a directory in a second partition to prevent this nightmare from happenning in the future.
    1)AC 97 high def audio version
    Realtek HDA 2.67found on http://wikidrivers.com/wiki/Main_Page or at www.realtek.comon right of screen on homepage and
    2) Intel HD GRAPHIC and HD Audio version
    Intel GMA 15.22.52.2559 (Vista/7) 14.46.8.5387 (XP)
    found on
    http://wikidrivers.com/wiki/Main_Page.
    Select your OS and and whether 32 or 64 bit. I recommend the .exe version as it works very smoothly. Uninstall HD AUDIO DEVICE or whatever it is called maybe "unknown device" with ac97 device ID "HDAUDIO\FUNC_01&VEN_10EC&DEV_0662&SUBSYS_17AA3604&REV_1001." Afterwards install AC 97 HD Audio Driver.
    After install reboot and wait till computer completely starts.
    Now uninstall Intel HD Graphics or your graphics device. When you get the uninstall box open, select delete the driver software for this device and then OK. When prompted to reboot select NO and Immediately start the install of the Intel GMA driver. Which installs both the Graphics Adapter and the Intel HD Audio. Reboot when finished and all HD Audio devices will be functional (hopefully). You will now have these versions installed. As shown in device manager/device properties/Driver tab
    Now uninstall Realtek AC97 driver you first installed to delete annoying Red Lexmark/realtek icon in Notification area (If your computer shows it after reboot) and windows driver update will install a microsoft driver (shown below)that works without the stupid lexmark red icon. See below. You will now have these versions installed. As shown in device manager/device properties/Driver tab 
    High Definition Audio Device
    Driver Provider: Microsoft
    Driver Date: 11/19/2010
    Driver Version: 6.1.7601.17514
    Digital Signer: Microsoft Windows
    IntelR) HD Graphics
    Driver Provider: Intel Corporation
    Driver Date: 1/10/2012
    Driver Version: 8.15.10.2622
    Digital Signer: Microsoft Windows Hardware Compatibility Publisher
    Intel (R) Display Audio
    Driver Provider: Intel(R) Corporation
    Driver Date: 8/23/2011
    Driver Version: 6.14.0.3086
    Digital Signer: Microsoft Windows Hardware Compatibility Publisher
    Voila. Now go to intel and run a driver update scan and it will likely correctly identify your Intel pieces and offer downloads for any that are not current. Good Luck!

    it is a user to user forum without any intervention from apple information-wise.I think this question appears and being discussed in another thread
    http://discussions.apple.com/thread.jspa?threadID=2411685&tstart=0

  • I had original iPhoto app from 2007, but in the last year it stopped working seemingly out of nowhere.  Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater.  My pictures are lost in the abyss.

    I had original iPhoto app from 2007 or 2008, but in the last year it stopped working seemingly out of nowhere.  Now I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater.  My pictures are lost in the abyss.
    I'm using OS Extended 10.9.5.  I don't know what the original version of iPhoto was.

    I just installed iPhoto 9.5.1 but it won't open even after downloading the iPhoto Library Updater
    Have you run the iPhoto Library Upgrader? You need to direct it to the location of your old iPhoto Library by clicking the "Choose Library" button in the lower right corner of the panel you are seeing when the upgrade starts.

Maybe you are looking for