Devices ATV Listed, but Only Summary & Sync Tabs

Hi, I have all my music/movies on my Apple TV from several months back.
The ATV functions properly from the ATV.
Now iTunes DEVICES lists my ATV, but only Summary and Photo tabs are shown.
Cancel and Apply are grayed out.
When I control-click on the TV under devices in iTunes is just reads "Turn Off Streaming".
iTunes Preferences SHARING has "Share entire library" checked.
tv< Settings> Computers does not show a 'connect to iTunes' option.
It does show my correct Name Library with a locked icon, and another same Name Library live below "Add Shared iTunes Library".
tv< Settings> Computers> Add Shared iTunes Library> "Connect to iTunes" option gives me five numbers to enter in iTunes which I've done twice now, but ATV still only shows only Summary and Photo tabs.
The lower Name Library when selected says "Connected to iTunes" with unclear notes.
*What am I missing - how to* get this ATV communicating with iTunes again (so I can update ATV with new songs)?
+++++
I have over 120gb of video/music on it so I would rather not have to reset the ATV and re upload everything.
All updaters have been ran...

I called 800 MY APPLE again and talked to another support specialist.
This time I had connected via Ethernet hard wire and de-reauthorized the iTunes from the Mac.
He put me on hold for 5 minutes and came and said his source told him to troubleshoot my wireless.
I again told him:
The wireless Airport Extreme takes my Apple TV out for Apple Updates, views Apple movie trailers off apple.com, views YouTube.com, and lists my ATV in iTunes> Devices if added as a streaming library OKAY.
Regardless, I added, I am connected by Ethernet cable now -- all the above works through the Ethernet cable, too -- so HOW is it a wireless issue that my ATV is not showing under Devices?
He agreed the wireless theory made no sense, but said that what he was told.
I suggested one of the recent updates (2.02, 10.53, 7.62) broke my ATV because it was working fine a couple weeks ago.
But, okay with wasting another minute on this...I did a Factory Restore on the AppleTV and it began working perfectly, of course that erased all my music/video.
I spent the next 10 hours or so uploading my 120GB of music/video...
+++
BTW,
Factory Restore reinstalls 1.0 (I had to update again to 2.0.2).
Apple spec said the ATV is 10/100 Ethernet speed over the cable (but it seems a lot slower uploading my iTunes library).

Similar Messages

I have just set up Itunes match on my new iMac. It is saying I can access all my 9000 songs but only the playlist tab is live. Am I missing something?

Hi
I have just set up itunes match on my new imac. It is saying I can access all my 9000 songs but only the playlist tab is live - I can't access albums or songs. Am I missing something?
Thanks

Hi,
I do not understand your problem. iTunes Match does not change the way iTunes looks. When match process is complete, the match screen tells you how much music you have in the cloud.
Across the top of screen you have options to select songs, albums, artist, composers etc.
Suggest that from main menu, select view>show sidebar.
Jim

Only Summary & Photo Tabs under the Apple T.V Devices, Help!

Hi to all,
from itunes main page when I select Apple TV from the column on the left hand side of the page under DEVICES, I only have 2 tabs! 1 is for 'summary' of apple tv which only shows Name, Capacity, Software Version and serial number at the top of the page and nothing else, as previously it showed more information than this, and the 2nd tab is for 'Photos'.
Apple TV also keeps disconnecting itself from itunes off my laptop.
I have new music on itunes but it will not stream to Apple TV
I know I have a temporary connection between the two devices as I can mess around the the photo settings.
Please can anyone help me out.
Thanks Lance Murdoch

you linked the appletv to itunes wrong.
2 tabs mean you have connected as a shared library only - which only provides streaming options.
remove the link and add this time as a primary connection, this will give you all the tabs and syncing options.

I have an ipod nano 6th generation. I purchased approximately 15 songs. They appear in my purchased list but won't sync up. What to do?

Can anyone advise me on my nano 6th generation not syncing with newly purchased songs? The songs appear in my purchased list but simply won't sync to my nano. There is plenty of memory left. I am using Windows 7. Never had an issue before. Thanks!

Hey,
You can try once restore your ipod nano and than sync your purchased song.
i hope that will work..... try once if its work plz updata me

How can anyone add to a SharePoint list but only some can edit all fields?

My office has a list on our SharePoint for product requests. We were trying to make it so that the "+Add Item" link was available to all who want to request a map but only specific fields such as Name or Description would be editable on their
end. Once the item is in the system, the SharePoint admins in our office could update things like Status or Analyst. However, after talking to the individual in charge of our SharePoint permissions told us that we cannot set this basic ability to "everybody"
and instead need to create a special group with limited permissions. Unforunately we have high-turnover between our office and other locations and see this causing a problem in the near future. Is there a work around such as creating a web app or form that
will push the necessary data into the SharePoint list or maybe just send it via email to designated recipients in our office to process it?

I do not see any simple solutions here. You have various options, each with different limitations and each will require some effort to implement. Mix and match as best meets your needs:
Create a standard list as usual*. In the lists's Advanced settings, in the Item-Level Permissions group, select the options Read all items and Create items and edit items that were created by the user. This approach lets users create their own items
and edit them, and they can still view other's, but they cannot edit other's. Note: some list templates do not provide the Item-Level Permissions group of settings.
Create a custom permissions level: copy it from Contribute. Remove all of the Edit and Delete list permissions. This approach lets your users create new and view existing entries, but not delete or edit them.
Configure Incoming Email, and email-enable the target list. You can configure the list to accept email according to the permissions that person has with respect to the list. Thus, for example, a person with Contribute permission level would
be able to send email to the list but a person with Read permission level would not.
Create the list. This will also create default New, Edit and View forms. Customize the New form in SharePoint Designer 2013 so as not to display the fields you do not wish the user to edit.
Create new site fields and content types: create one content type that displays only a few of these new fields and the other that displays all of them. Add these to the list. Configure a custom content type as the default for the list that displays
only a few fields. Users will see this content type when they create a new entry. Edit the New list form to display only this content type. Edit the View list form to display only this content type.
References
Configure custom permissions in SharePoint 2013
Configure incoming email for a SharePoint 2013 farm.
Create a custom list form using SharePoint Designer
Create or customize a site content type

IPhone is appearing in iTunes, but only Summary, all content not appear

I have a problem, I want transfer my music from iTunse to my new iPhone 5, I have upgrade my iTunes to the latest version, I have restart my PC, when i connect my iPhone to PC my iPhone is appear in iTunes, But i get this message
"iTunes cannot read the contents of the iPhone, go to the
summary tab in iphone preferences and click restore to restore
this iphone to factory settings"
why i should restore my new iPhone? is it have other way to solve this problem? its should I restore to factory setting???
Please help me! i new in iPhone

topic close!
Solve already

Not able to find Group/singer in the "artist" list but only by album

After importing a cd, the artist name appears in my library, but then on my ipod I can only locate some groups/singer/artist by looking for the album.
Why aren't all of the artists appearing in my "artist" list on my ipod? THANKS MUCH!!

It could be that you have inadvertently imported these CDs into iTunes as part of a compilation. If so, the artists won't show in the artists menu on the iPod.
To check, highlight the tracks on one of the offending artists CDs in iTunes, right click and select "get info". This brings up a multiple song info window, and from there you can check if you have 'yes' in the box marked "part of a compilation".
If you have, select 'no' instead and click 'ok'. Do this with any CD that has this issue. This will alter the info in iTunes, and you should then connect your iPod and synchronize the changes.
The problem arises because the information contained on the Gracenote CD Data Base (where iTunes gets all it's album/artist/track info from), is sometimes incorrect. It can show CDs as compilations when in fact they are not.
You should also check that the songs have album name info in their ID tags.
See: Some songs don't don't show under artist on my iPod.

TS1363 Ipod Nano 7 shows up as an ejectable device in Itunes, but will not sync/does not show up as a device.

My nano 7 will show up meaning an option to eject it shows up. The sync options are not grayed out, but it literally goes into sync for about 10 seconds and then shows as complete. None of my music has moved over to nano. I've uninstalled and reinstalled Itunes with newest version and have reset the nano as well. The Itunes diagnostics fails when it does the device connected testing.

Hello MSavaski,
Thanks for the question. Depending on your symptoms, the following articles may provide a resolution to your issue:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Also, the following troubleshooting assistant may be helpful:
Apple - Support - iPod - iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
Thanks,
Matt M.

App crashes when I click button but only in a tabbed application.

Hi.
I have a tab bar controller and on the first view controller there is a button and an output label. Pressing the button takes you to a second view via a modul segue and this view contains a pickerview with an output label and a Done button. The selected row in pickerview is displayed in the output label and when you press the Done button I want the selection to be displayed in the output label on the initial view controller.
However, when I click the done button, the app crashes. This only happens when built as part of a tabbed application, if I use the exact same code in a seperate application using just the 2 view controllers it works perfectly.
Hmm, as soon as I can work out how to copy and paste my code here I will post it.

I too get the same error:
Faulting application name: wwahost.exe, version: 6.3.9600.17031, time stamp: 0x53085927
Faulting module name: atidxx64.dll, version: 8.17.10.560, time stamp: 0x537ea1cf
Exception code: 0xc0000005
Fault offset: 0x000000000006f403
Faulting process id: 0xa30
Faulting application start time: 0x01cf8522d693203a
Faulting application path: C:\Windows\system32\wwahost.exe
Faulting module path: C:\Windows\system32\atidxx64.dll <-- PROBLEM RESIDES HERE!
Report Id: 1ea5f7e2-f116-11e3-82a0-54271e32d2cb
Faulting package full name: Microsoft.ZuneVideo_2.2.902.0_x64__8wekyb3d8bbwe
Faulting package-relative application ID: Microsoft.ZuneVideo
I have the latest Radeon graphics drivers, I've even tried beta drivers and it is looking like it is AMD's drivers which are at fault.
Windows updates still have not resolved the issue, which has been going on since last December. the 13.2 Catalyst drivers work, but none of the new drivers work with modern apps =(
When I switch over to the Intel 4600 graphics onboard, all apps work flawless. I have the latest Mobo driver, chipset drivers, windows up to date as of 15 minutes ago. Can some one send this to highest tier support and get on AMD's case about proper debugging
of windows 8.1.1 drivers. =) Ty Rob Cruz

1000 contacts but only 67 sync to Outlook HELP!!!

I need all 1000 contacts on my Torch to go to Outlook. How do i get all of them to move over?

could be a corrupt contact, if outlook is up to date follow the below
In outlook Make a new folder for contacts called backup
move all contacts to the folder and wait for all to be removed from device during sync
then pull battery on device and put back in
After device boots move contacts from backup to the contacts folder and wait for them all to appear
Make a new contact in outlook and see if it gets to the device.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

ITunes won't shut down - but only after syncing

I ran into an odd problem and found a workaround, so I thought I would post it here in case anyone else runs into this. In searching, I couldn't find anything like it:
The details: Running iTunes 7.5 on a freshly installed copy of XP. Have two iPods -- a Touch, and an iPod video.
The problem: If I open and close iTunes without connecting an iPod, everything is fine. However, if I connect either iPod and allow it to sync, iTunes will continue to run even after it's shut down. It starts hogging as much CPU time as it can get, which slows the system to a crawl -- and causes an error message when I try to restart the machine.
The solution: I found I could eliminate this problem if after syncing, I went into the Windows Task Manager and killed the "SyncServer.exe" process. So just for yuks, I found this file and moved it from its current location so that it would never load. I thought iTunes would balk at this, but it didn't -- both iPods still sync, and the above problem no longer occurs.
Surely there's got to be some penalty for killing this file, but I haven't run into any problems ... yet. Has anyone else been bit by this issue?
Message was edited by: videojanitor

Bump...I have the same problem.

AppleTV syncs with iTunes, but only two tabs - summary+i photos

The problem started when my hardrive on my iMac stopped working. My apple TV was working fine and I continued to buy some movies while my iMac was being fixed. I had my iMac hardrive replaced and I had a backup of my itunes music folder.
Now when I tried to re-sync apple tv with my iMac, i typed in the 5 digit code fine and apple TV pops up in the device list. but when I click on the device in itunes, I only see two tabs for the device. Summary - which is mostly blank, and Photos - which allows me to select the folders I want to include. What happened to all the other options, TV, Movies, Podcasts etc. How can I get it all back?
Thanks for any suggestions.
Tony

Sounds like you are set up for streaming only, See This
Settings/computers, select 'connect to itunes.....' (not shared library), you may need to unlink your current set up first.

I don't get "Manage my Account" when I select the Sync tab, but if I try to create a new account it says my userid is already in use. How can I get my password & sync key?

My OS is Windows 7 Home Premium.
My Firefox version is 4.0.1.
When I try to setup Firefox Sync, I get a choice of "Create a new account" or "Connect".
The first tells me my email address is already in use, but selecting the Sync tab does not give me "Manage my Account."
How can I find out my password and sync key?

Hi Russ!
Apparently you already configured your account but you don't have nor the key or the password. You can get the password in the [https://account.services.mozilla.com/forgot following link] but you would need the Sync Key to sync your device to the rest of your devices.
If you don't have the Sync Key the best thing you can do is to reset it, by deleting the previous account and creating a new one with the same user. You can perform this tasks from your [https://account.services.mozilla.com/ account dashboard].

Allow All Users To Add List Items But Only Certain users To Edit Them (SharePoint 2013)

How do we allow all users to add items to a list, but only allow certain users to edit the list items? Site is SharePoint 2013. We have tried creating custom permissions. That does not seem to work.

I've setup a custom list on my SharePoint Foundation using a custom permission level to accomplish this. I setup a custom permission level on the site called 'Add Only to Lists' which allows adding an item to the list and setup the group with
the default read and the custom permission level and it works. The users in the group get the add item but do not get edit item, not even items they created themselves.
Any users who should have full edit permissions can be setup under the normal edit/contribute/design permission level and work normal.
Below is the Role Definition pulled via PowerShell and Role Assignments on the list in question. As well as a picture showing what it looks like to something assigned that role level.
Role Definition
Name : Add Only to list
Description : Can add items to a list but cannot edit or delete
Type : None
Hidden : False
Order : 2147483647
BasePermissions : ViewListItems, AddListItems, Open, ViewPages
List Role Assignments
Member : Home Visitors
RoleDefinitionBindings : {Read, Add Only to list}
Parent : IT Equipment Request
ParentSecurableObject : IT Equipment Request
The user can create a new item, but cannot edit items - not even items he created.

I have 333 songs on my library but only 108 on my ipod...on the library there are ! in front of them and they wont copy to my Ipod..how can I fix this

Hello, I have 333 songs on my library list but only 108 on my ipod....on the library the songs that won't download to my Ipod have ! marks in front of them, how do I get rid of them so them may go on my ipod?

The ! usually means that the song file has been moved or deleted. If you can find the song file on your hard drive, you can remove the song from iTunes and put it back by using File>Open and navigating to the song file. There is also a location that iTunes will look for song files (I'm a Mac guy, so I don't know where it should be in Windows, but for me it's HD>Users>My User Name>Music>iTunes>iTunes Music and then there are various folders for different albums, podcasts, etc.), so I would keep them all there.

Devices ATV Listed, but Only Summary & Sync Tabs

Similar Messages

Maybe you are looking for