Devices in cisco view

Hi
what is the reason if can see  , cisco devices in cisco view while you can't see some of these devices in topology service?
thanks in advance
Ibrahim

Ibrahim,
As you know some devices may not show up as connected to others due to their CDP neighbor adjacency not being determined for various reasons.
Please look under unconnected devices view on Topology to see if your "missing" devices are there. Another place you can check the same thing is within Device Center - click on the "Topology" tab near the top of the page and you should see the topology specific to that device. For something like and ASA (which doesn't support CDP), it will always show as "alone" and always be put into the Unconnected Devices view.

Similar Messages

  • Cisco View Device Manager

    Hi,
    is there anybody who can tell me how to bring the Cisco View Device manager for 6500er up? I've installed the CVDM V.1.1 in the bootflash of my 6500er, IOS version is 12.2(18)SXF4 enterprise services. Installed java on the client is v.1.4.2_06. After launching the CVDM whithout proxy settings the windows starts gathering information, after a few seconds it stops with an error "java.lang.NullPointerException". This failure appeared with Mozilla 2.0.0.8 and IE 6.0, on the 6500er all vty lines are idle. Is anybody here who can help to solve the problem?

    Here the text from the readme file; try to get the zip-file via the Bug-Id:
    09-December-2005
    This patch provides fix for the following bug:
    CSCsc10956 - CVDM 1.1 does not work with 12.2(18)SXF
    SUPPORTED IOS VERSION:
    12.2(18)SXF
    SIZE:
    5,593,057 Bytes
    DOWNLOADING AND MOVING FILES TO TFTP SERVER:
    cvdm-c6500-1.1-CSCsc10956.zip contains the following two files
    * cvdm-c6500-1.1.tar and
    * cvdm-c6500-1.1_K9.tar (for Cisco IOS Cryptographic software)
    Unzip cvdm-c6500-1.1-CSCsc10956.zip and copy one of the tar files to a TFTP server
    Make sure to enter filenames exactly as they appear; (filenames are case-sensitive).
    TRANSFERRING FILES TO YOUR SWITCH:
    Step 1 : Access the switch CLI using a Telnet connection or the console port.
    Step 2 : Transfer the files from the TFTP server to the bootflash of the switch. Issue
    the following command:
    # archive tar /xtract tftp:// / bootflash:
    where is the filename of the CVDM-C6500 tar file you want to install
    and is the IP address of the TFTP server. Make sure to enter filenames
    exactly as they appear (filenames are case-sensitive). Make sure you are not in
    configuration mode when issuing the archive command.
    Step 3 : If you are not in configuration mode, issue the following command:
    # configure terminal
    Step 4 : Set HTTP server and path. For example:
    # ip http path bootflash:
    Please refer cvdm-c6500-1_1_readme.pdf in http://www.cisco.com/cgi-bin/tablebuild.pl/cvdm-6k for
    further details on CVDM-C6500.

  • Uploading/Installing procedure for device packages in Cisco View/RME

    Hi,
    Running LMS3.2 with HUM 1.2.
    In cisco view when we tried for below mwntioned devices it says "Device Package for these device is not available".
    WS-C2960S
    CISCO2921
    CISCO3945E.
    Please let me know the link to download the device packages for above devices and the procedure to install it on LMS.
    Thanks & Regards,
    Krishna

    Hi Krishna,
    Replace the attached file (vds.properties) in the below location :
    NMSROOT\CSCOpx\lib\classpath\com\cisco\nm\xms\vds
    then Restart the Daemon Manager ..
    NOTE : Please take the Bcakup of your Existing file (vds.properties)
    --Then    go to common service > software center > device update >>    check for the Device Pcakages , you will be able to see   the Device  Packages now..
    Thanks--
    Afroj
    If this post answers your question, please click the "Correct Answer" button"

  • Cisco View

    I m not able to view the cisco router 3825 and 2800 in cisco view i have Version 6.1.2 i even install the latest package but still not able to get the view, it is giving me again and again error that required package is not install please hlep me out how to solve this problem.

    Dear Wasim
    This is what we did to solve a similar problem at a customer.
    a) Remove the appropriate device package from CiscoWorks Common Services >> Device Update. Re-Install (Update) the package from the internet.
    b) If (a) does not work, Remove ALL 'CiscoView Devices Packages' from CiscoWorks and Re-Install. I think they are about 90 or so.
    We had errors with various devices including 2800, 7600 Series Routers, 2960,6500 Series Switches, and by following the approach (b) above, all are working perfectly now.
    Regards
    Farrukh

  • LMS 4.1 cisco view

    Dear all,
    I am trying to access the cisco view but a message appears notifying me to install the devices packages, i have tried to do an online update from the software center, but it did not work.
    the devices that i have are, 2960 switches and 6500 switches and 3560 switches.
    any idea of how to fix this issue.

    Seems some corrupt packages are creating issues. Try the following command :
    NMSROOT/bin/psucli -p cvw -cpf
    If the issue persist, i would recommend to open a TAC case for this to be troubleshooted further.
    -Thanks

  • Cisco view for Cisco 7201 router

    Hi ,
    We have LMS 3.0.1 and we are not able to get cisco view for Cisco 7201 router.
    Any help would be appricated.
    thanks,
    Samir

    Make sure you have version 22.0 of the Rtr7000 CiscoView package loaded.  You can update your CiscoView packages under Common Services > Software Center > Device Update.

  • How to use Device Profiles and Viewing Conditions Profile in Photoshop Elements 11?

    In trying to get to grips with the Colour management aspects of PSE11, I have encountered the following problems:
    Having selected "Display" a sequence of clicks (Change display settings -> Advanced settings -> Colour Management -> Colour Management tab -> Colour Management)
    gives a screen which includes the headings:
    Device Profile  and Viewing Conditions Profile.
    1. Device Profile. Besides sRGB and ARGB, the profile list includes the profiles for all of the Epson papers. (I have an Epson Stylus Photo PX810FW).
    I changed the Profile to an Epson Grayscale, this was accepted within the menu, but there are no changes from normal when I viewed the image on the Windows screen or within
    PSE11. ("normal" is sRGB or ARGB).
    I thought it worth a try to test that, if I wanted the display image to closely represent what I would get on a particular Epson paper, this may be a way to do it.(I suspected this approach because I have never
    seen it in the literature!).
    So what is the purpose of all of the paper Profiles appearing in the Display listing?
    2. The Viewing Conditions Profile has also several options. I have tried to find the criteria for choosing one rather than the other, but failed to find any information. Can anyone help? I seek general guidance
    rather than the details of the Profiles.
    As a seperate question:
    Selecting Image on the PSE11 menu across the top of the displayed image, and then Convert Colour Profile, I tried this process on an image, converting tiff to sRGB. When saved there was an extra asterisk in the saved title but in this case,
    the file was still labelled tiff and there was no change in the number of Mbs. If a conversion has taken place, how is one to know?  Does saving a tiff file as jpeg change its colour profile? When is it useful to use this feature?
    Many thanks to all responders! 

    Addressing your second question, you are confusing two different things.
    tiff is an image file format, as is jpeg, as is psd, as is png, as are dozens (if not hundreds, http://en.wikipedia.org/wiki/Image_file_formats) of other formats.
    A colour profile represents the colour characteristics of devices so that, for example, displays know how to display the colours, printers know how to print them.
    Image files MAY, but do not have to, contain colour profiles.
    For details:
    http://help.adobe.com/en_US/creativesuite/cs/using/WS52323996-D045-437d-BD45-04955E987DFB. html
    http://en.wikipedia.org/wiki/Color_management#Color_profiles
    http://en.wikipedia.org/wiki/ICC_profile
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Pictures sent from Samsung WP7 to iOS Devices Cannot Be Viewed Once Saved the the iOS Photo Library.

    Pictures sent from Samsung WP7 to iOS Devices Cannot Be Viewed Once Saved the the iOS Photo Library.  I don't have issues with saving pictures from any other user types.  Please help!
    Steps to reproduce issue: 
    1) Share pictures from WP7 either via email or Messaging with iPhone 4
    2) View photo on iOS device in email app or messaging (text message)
    3) Save Photo to Photo Library in iOS
    4) Go to Photos app in iOS
    5) This results in a dialog saying "Rebuilding Photo Library"
    6) Once this is done, the photo sent from WP7 appears a grey block icon that says ".JPG: on it

    iPhoto > iPhoto Preferences > PhotoStream, turn off automatic uploads.

  • HT204088 is there a way to see what songs were VIEWED (not bought) and what device it was viewed on?

    can someone please help me,
    is there a way to see what songs were VIEWED (not bought) and what device it was viewed on?
    because there were some songs viewed on my history that noone in my family has viewed as they all have access to this account, and i want to find out where it was viewed from

    no

  • Alarms for Third party devices on Cisco PI v 2.1

    Is it possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1? If so how do i configure PI to show the alarms?

    Hi,
    AFAIk, It is not possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1.
    we have very limited support of 3rd party devices in PI. third party devices only snmp polling, snmp traps and syslog will work
    Third-party support   
     ●  Ability to discover and monitor third-party (non-Cisco) switches that support RFC 1213 and wireless controllers/access points from Aruba Networks
    Thanks-
    Afroz
    ****Ratings Encourages Contributors ****

  • Remove device from Cisco Connect?

    Help!  I want to REMOVE a device from Cisco Connect and do not see how to do it.

    I have a Linksys E3000 router and using Cisco Connect. When I go to Parental controls I see network device a few times but I do not know what theyu are. Is there a way to remove device from there or is there a way to find what the mac address is of the device and then is there a way to rename it???

  • What's the username & password when i connect device from cisco network assistant

    what's the username & password when i connect device from cisco network assistant?
    http://i200.photobucket.com/albums/aa273/wallfire02/Capture_zpsa8f5fd2b.jpg

    Although that may be true...
    If I click the "Connect As..." button it asks for a username and password.
    I've experienced connecting to other user's computers on a network.  To gain access to their computer, I just use their username and password.  I've done this before to transfer files without using a flash drive or burned disk. 
    I'm trying to find out what I'm supposed to log on as to gain access to this device...
         My point is that yes, I'm connected to it by wifi.  Otherwise it wouldn't show up; ha-ha! 
    Is my point really that hard to grasp?

  • Cisco View / Save running config

    Our helpdesk folks use Cisco view to enable/disable ports.  Yesterday one of our switches lost power and the running config was not saved.  Is there I can force Cisco View to save the config so this doesn't happen?
    If not, does anyone know of a work around I can implement?

    Actually there are a few more options with this as well.
    I would set it up to store them either locally in its own directory maybe called configs and put them on flash:
    or you can send them off to a remote spot with tftp or ftp.
    Also you need to figure out how many of these archived file you want to keep, 14 is the default.
    you could do this...
    config t
    cd slot0:
    mkdir configs
    That will make a directory on flash in slot 0
    next
    config t
    archive
    path slot0:/configs/$h   ------the $h will use the host name for the file name
    write-memory
    time-period 1440
    maximum 5   ---------this will make it so only 5 configs are saved in archive
    Please rate helpful posts
    Mike

  • SW download: unable to download Cisco View device packages and CVW patches

    With the current Software Download frontend I cannot find a way to download ciscoview device packages and software patches; I can get these files through the "Software Search" feature but that's hardly what I need. To update a LMS server that is not allowed to connect to the internet it is necessary to have the option to download these device packages and patches in a bulk....
    just tell me where to click.... :-)

    Hi Martin,
      Is this better? http://www.cisco.com/cgi-bin/tablebuild.pl/cview50

  • C2960 Web Catalyst Device Manager switch view shows "Unsupported Device"

    Hi All,
    I`ve setup many C2960 switches over the years but this one has me stumped.
    I`ve configured a brand-new out of the box Cisco C2960+24pc-l using the same procedure used on our other switches but when accessing the Web GUI the view that should show a picture of the switch and port status just shows a grey block with "Unsupported Device".
    I`ve tried it from IE, Chrome and firefox and XP plus Win7 PCs to no avail.
    Am I missing something or do I need to send this switch back for warranty replacement?
    Can anyone point me in the right direction please?
    Many thanks,
    Paul

    I'm also. Try to Call Cisco support no response  and also email for support.

Maybe you are looking for

  • Control image to report doesn't take all width

    I want to add and print a control to my report, but the control image doesn't take all the width avalaible on my report. It's stretched before the margin. Take a look to my exemple in attachement thanks Attachments: print_panel.vi ‏38 KB

  • Why does my IPad no longer print on my air printer HP photo smart 5520

    I Can no longer print from my air printer HP Photo smart 5520. It was working great until my last upgrade. Need help

  • Can't save my documents!

    When I click "save" or "save as", Appleworks freezes and I have to force quit just to get back to my document. Any help? Thanks, Teri

  • RFC ERROR IN WEB DYNPRO

    Hi I m Doing Web Dynpro Program For DMS Project There Is Some Problem Occuring In Default Function Module ARCHIVOBJECT_CREATE_FILE And The Error Msg Is : Cannot Call RFC Program And No Return Possi By Srinivasan.R

  • How to Disable Popup Preview of Messages?

    Hi. I'm just trying to figure out if there's a way to stop Mail.app from popping up the small preview of messages in the top right corner of the screen when they're first received. I find this incredibly annoying. I've searched thoroughly for a solut