Devices no longer connect to my Hub

We've had our hub for about three years now and have a lot of devices connected to it; an iPhone 5, a iPhone 4, two iPods, a BlackBerry, a Windows phone, a Laptop, a Tablet, a Playstation 3 all through Wireless and a LG Smart TV, BT Vision Box and a Seagate Hard Drive through Ethernet cables. Everything normally works fine.
Last week following an electrical storm several devices could no longer connect to the Hub - the iPhone 5, the Tablet and one of the iPods.
The Laptop is fine and works all over the house as it always does, however, if I use the shortcut on the desktop on the Laptop to get to the Seagate hard drive - I get the message that windows can no longer find it.
My iPhone 5 cannot connect to the Hub - it can see it - but cannot connect to it. I have to drop it a connect to my own Hub through BT Fon and then it works fine!
I've asked my iPhone and the other devices which can no longer connect to the Hub to forget the hub and to get them to search for it again. They can all see it, but can't connect - not getting as far as asking for the wireless key.
I've powered off the Hub and left it for a couple of minutes. I've tried re-setting it and I've been into the Hub Manager to see if it looks like any changes have been made to it. Nothing seems to work.
I haven't changed the channel on the Hub as it doesn't appear to be a signal strength issue (the iPhone 5 shows the Hub on maximum strength everywhere in the house).
Can anyone help please????

Hi Guys,
I've done a factory reset on the huband it doesn't seemed to have changed anything. My iPhone 5 still can't connect to it, I can't use the shortcut for the Seagate drive and the Hub no longer apppears as part of our home network when I look it up on my PC.
Below is a screen shot of the Hub Manager. Matt-PC is my laptop which is connected to the Hub via Wi-Fi. There are currently three Ethernet Cables plugged into the back of the Hub - the Seagate Drive, the TV and a BT Vision box.
Any other ideas?

Similar Messages

Since upgrading to Lion USB devices no longer connect to my virtual machine in parallels despite my parallels settings.

Since upgrading to Lion USB devices no longer connect to my virtual machine in parallels despite my parallels settings. As a result all usb devices show as networked drives from the mac. Therefore cannor access encrypted part of drive. Any ideas???

I actually have the same problem, since I upgraded to Mavericks my MacBook Pro can't seem to find the Bose sounddock 10. Has anyone found a solution to this.
It still works with the iPhone 5
Thank you

USB devices no longer connected

Since installing Snow Leopard I have had problems with my Epson R2880 printer. I downloaded a later driver and this worked for a few days but now it will no longer print from any application. My TomTom has also stopped working on USB.
The USB ports seem to be faulty, although the keyboard and mouse are OK, everything else fails to connect via USB. They all show up in System Profiler with correct devices attached but are not seen by the OS any more.
I have tried a reset of the PRAM and also disconnected everything and powered off for at least 2 hours.
Anyone familiar with this problem or have a fix?

I do have a powered USB hub but even direct connects stopped working. I have fixed the printer problem now after a number of attempts. I installed the new 10.6.1 patch for SL but this made no difference. I have now re-installed both Rosetta and the Printer Support from the install CD, both of these are optional but clearly very important.
Finally I downloaded again the latest Epson print driver and my printer is now responding. Unfortunately the TomTom still will not connect so I may try reloading that software too.

Can no longer connect wirelessly to hub

Until today everything has been fine. Now I cannot connect wirelessly to my hub. I get connection time out messages. Sometimes my hub does not even show up in the list of available networks. I can connect to BT Fon though. I've tried re-booting both the hub and my computer with no effect.
I'm using an iMac OS X 10.5.5
Can anyone help please.
Solved!
Go to Solution.

Hi
How do I do this if I can't get on to the Internet properly???
If you follow jjgraphics advice above and connect a wire (ethernet cable) from your hub to your PC/laptop you should be able to connect to the internet.
Funny enough I lost my wireless connection on my home hub2 last night.
Even though http://www.metageek.net/products/inssider insidder could still see my wireless signal was on a clear channel.
Using ethernet wired connection I was able to still connect to the internet.
I used the button on the side of the Home hub2 and turned both laptops off but still not able to connect to the internet using wireless... even re-entered my wireless key.
The solution was to turn the power off the Home Hub for a minute or so and on turning the hub back on everything worked again.
Btw don't forget Christmas lights can cause wireless problems.
PC
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Silverlight no longer connects to SignalR hub

after some update we 2/12/2015 has security Error when SL tries to connect to signalR host.
WPF app works fine, SL throws a security error. No explanation on how to fix.
Where do I go from here?
foxjazz

Hi,
Here are some articles talks about signalR and signalR2 with silverlight 5 which you could refer:
SignalR with Silverlight 5
http://www.codeproject.com/Articles/619376/SignalR-with-Silverlight
SignalR 2 in Silverlight 5
http://www.codeproject.com/Tips/787033/SignalR-in-Silverlight
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Laptop can no longer connect - Hub doesn't seem to see it any more

Hi Please bear with me - this is probably going to be long! I have been tearing my hair out for the last 36 hours trying all sorts of things to get my laptop to connect to the hub, but to no avail. Also, I am no tech expert - everything I know I find out by googling/reading forums like these. It used to connect, no problem.Laptop (an old Dell, running XP Pro) still 'sees' the Skyhub.But it seems the Skyhub no longer sees the laptop (not in list of wireless devices).My Samsung tablet and my son's Chromebook both connect successfully to Skyhub.Laptop connects successfully with nearby unsecured BT-FON networks.Laptop connects successfully with Skyhub via ethernet cable. Things I've tried (not sure i can remember them all, haha):Disabled firewallTurned off encryptionRan windows update to laptop while connected via ethernetPinged what I think is the hub's IP address (192.168.0.1) Nothing. 4 packets sent, 0 received, 4 packets lost.Used cmd prompt to try various suggestions I've read on forums - renewing IP, flushing winsock, etc. Don't understand half of what I did but I typed commands carefully, but didn't solve connection problem.I have tried changing the channel at both the hub end and the laptop end.I have tried entering IP address manually (and subnet mask and gateway and DNS servers). Didn't work so set it all back to 'obtain automatically'.I have pressed button on hub until light flashed 4 times, thereby putting it back to factory settings.A windows diagnostic test shows IP address failure after trying to connect to Skyhub.I have uninstalled/reinstalled/tried updating the wireless network card on my laptop. It says it is working properly.I have opened inSSIDer, and laptop quite clearly sees the Skyhub, and is receiving a strong signal. I'm a bit confused why it says the security is "WPA2-Enterprise". The Skyhub itself says security is WPA2-PSK (AES)Mindst, even with security turned off, laptop still cannot connect. So:Skyhub is still working on wired PC, and wirelessly for tablet and chromebook.Laptop is still working because it can connect okay to neighbouring networks. As a non-techie, it seems to me that something is stopping the hub from 'seeing' the laptop, and assigning it an IP address. But what?!Thanks in advance for any help.Louise I have taken a few photos: https://www.flickr.com/photos/35233074@N04/

Hi. I have to say that your problem Louise seems very close to mine. My work laptop (Lenovo Thinkpad T430, reasonably up-to-date) has secure direct access connection capability to my employer's network. However, while the laptop connects easily by wireless connection to my Sky router no internet access from the router outwards. This is a recent (last 1 – 2 months) issue and started as intermittent – the internet connection would come and go without any apparent rhyme or reason. It is now apparently a permanent issue. It is also only a wireless problem - it seems to connect to the internet OK by cable to the router. This is while at the same time other devices connected to the router get internet access fine. There are only about 7 or 8 devices max connecting wirelessly to the router at any given session. My workplace IT Service staff have investigated but washed their hands of the issue as the laptop connects fine both wirelessly and by cable to the workplace corporate network. My Sky router is a Sagem model (no model no. is evident – it’s an older model then the current Hubs) of probably 5 or 6 years vintage (I’m note sure of that). Does anyone have any suggestions? I should also say that at present I can’t access or alter any of the laptop connection settings because the work’s IT Services won’t give me the necessary device admin rights yet equally won’t attempt to resolve it because it’s my home network issue! Don’t let that put you off suggesting connection setup fixes though (I’ll happily put these to workplace IT Services! Specifically though – is there way to restore the router’s firmware to the last time it worked? Mark

I can no longer connect to the internet from any other device.

Having successfully upgraded to OS X Mavericks from Snow Leopard I can now no longer connect to the internet from any other device. I have an iPhone 4S, a Galaxy Tab, and an internet radio, none of which can connect to the internet since the upgrade. They connect to my BT Home Hub without a hitch, it’s just that they do not connect at all to any website. All was fine before the update.
The upgrade was to my iMac and that’s fine, no connection or surfing issues.

Hi t0ad1e,
The article below may be able to help you troubleshoot your Wi-Fi issue with the iPhone:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer. The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that. Anyone know how to fix this?

Hello there philp_69,
If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
Thank you for using Apple Support Communities.
All the very best,
Sterling

My iphone 4 will no longer connect to my Itunes since 7.1.1 update itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected

my iphone 4 will no longer connect to my Itunes since 7.1.1 update, itunes has latest update as well followed help which involved using mobile device properties no good re installed itunes still same problem iphone is showing up on pc as connected but itunes unable to see it
any Ideas cheers

Try holding the power and home button untill the apple symbol appears and let it reboot, if that does not work Try a DFU restore https://discussions.apple.com/thread/5269891

ITunes could not connect to this iPhone. The device is no longer connected

A few days ago, my iPad 3 A1430 screen turned black. Siri was still there but very slow to respond. The following day, the screen display returned (the usual green background colour but a much smaller display and not a single icon present). Siri was back up to speed, could play music, display info but could not respond to calendar enquiries etc. The iPad would switch off but not reboot. I let the battery level drop to zero then re-charged: iPad now working again.
Wanting to back-up my iPad, I ran iTunes version 12.1.0.50 on iMac (Yosemite 10.10.2). I have PCemulator installed and when the iPad connection was made, I received the usual screen prompt for which to connect to Mac or PC. (The problem starts here: - the prompt was flashing on/off). I selected Mac & received the message “iTunes could not connect to this iPhone. The device is no longer connected”.
Rebooted PC and iPad, connecting iPad offers no device prompt, only the same error message.
Successfully backed up iPhone 6 using iTunes.
Upgraded iPad software to IOS 8.2 and connected again. No effect, same error message.
Looked at various Apple posts but couldn’t find a solution. After several iMac & iPad reboots, eventually managed to back-up my iPad and in the process lost all my iPad music built up over the years on my old PC. Managed to recover these music files from my old PC and load them onto iTunes on my iMac. Tried to sync my iPad but back to error message “iTunes could not connect to this iPhone. The device is no longer connected”.
Any solution?

I have the same problem. In fact when I plug in my iPad 2 updated to ios 7.0.4 I get that same message and it crashes my entire system - forcing me to reboot.

I am using Dreamweaver CS4 and can no longer connect to Device Central - Can you help me with this?

I am using Dreamweaver CS4 and can no longer connect to Device Central - Can you help me with this?

Device Central was discontinued April 23, 2012.
http://www.adobe.com/products/devicecentral.html
And replaced with Adobe Edge Inspect CC (for Cloud subscribers)
http://html.adobe.com/edge/inspect/
Nancy O.

Disconnect Device through Hotspot and can no longer connect

I recently disconnected a Windows 7 device through the "Connected Devices" option on the Verizon Hotspot. After disconnecting that Windows 7 device I am no longer able to connect through the Verizon Hotspot. I have removed and added back the hotspot profile in Windows 7 and can still not connect. I can still however, connect to other devices on the Verizon hotspot. I receive a simple error message in Windows 7 to verify the encryption settings even those encryption settings are properly set to WPA2. It appears that both devices appear to be out of synch. Has anyone experienced this with other Verizon 4G LTE hotspots? I generally just disconnect the device or turn off the hotspot when disconnecting however, I did not see any hard whatsoever in disconnecting the device through the hotspot "Connected Devices" option. Any help would be greatly appreciated as I need to get one of my business laptops that use Windows 7 back online..

If it's encryption Windows 7 is speaking of, make sure in the wireless adapter settings configuration that not only is on the correct WPA2 as you stated but the encryption matches, such as AES or TKIP.
Otherwise, removing the connection from the Preferred Wireless Networks list and resetting the device should allow a fresh new start.

5C will no longer connect to my home network, but all other devices do.

We had a service interuption and lost the wifi network at home for a while. When the network came back my 5C will no longer connect to the network, even though all of the other devices will. It will connect to wifi on other networks. I reset the router first. On my phone I have updated to the latest IOS, shut the phone off, forgotten the network, reset the network settings and reset the phone settings. Still will not connect to the network. It acts like it is trying but never makes it. I do not recieve an error message of any sort. What is the next step?

Good day Telbuoy,
Thank you for contributing to the Apple Support Communities.
It sounds like your iPhone 5s is not connecting to your home Wi-Fi network. You've done a good job of isolating this behavior to your iPhone and home Wi-Fi router.
There are a few more steps that I'd suggest trying next:
Make sure your iPhone is updated to the latest iOS version using the steps in Update the iOS software on your iPhone, iPad, and iPod touch.
Make sure your router is using the settings in Recommended settings for Wi-Fi routers and access points.
Update your Wi-Fi router with the latest firmware and make sure the router supports your Apple product. For more information, contact the manufacturer of your router. (from If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network)
Best Regards,
Jeremy

My iPhone is not recognised by iTunes [iTunes could not connect to this iPhone. This device is no longer connected]

When I plug my iPhone 4 in to my MacBook Pro, it charges but it is not recognised in iTunes.
After about 30 seconds I get the following message:
"iTunes could not connect to this iPhone. This device is no longer connected."
The device still charges but is not recognised.
I've obviously tried restarting both devices / programs. I'm running the laters versions of iTunes and iOS on my iPhone. I've tried all the steps in the troubleshooting pages, and i've re installed iTunes. Stil no luck.
Any help would be appreciated.
Thanks!

I am having a very similar issue with my iPhone 5.
Yesterday I took it to the Apple Store as the battery was draining rapidly, and had the phone restored from an iCloud backup. Everything but my music was synced, and when I returned home to sync my music, the iPhone is only being recognised by iPhoto and I am having error messages from iTunes that the iPhone is not recognised and is unresponsive. I have tried everything I have found online, including trying to connect my phone to my work computer with similar messages.
Please help!

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer. It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes

I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.

Greetings cdewinkel,
It seems your iPad is not staying connected to your computer during syncing. The following article provides a number of troubleshooting steps which may help. This article is intended for devices which are not being detected, but the troubleshooting steps are relevant to your issue:
If you don't see your connected device in iTunes for Mac - Apple Support
Make sure that your device is on
Also make sure that you can get to the Home screen.
Get help if you have one of these issues:
Your iOS device won't respond or turn on.
Your iPod won't turn on.
You forgot your passcode or your device is disabled.
Make sure that your Mac supports your device
See the system requirements for iPhone, iPad, or iPod.Check your USB connections
Unplug other USB devices from your Mac and try again.
Try a different USB port.
Try a different USB cable.
Learn more about using USB cables with your Mac.Make sure that your device trusts the computer
You might get an alert if you haven't connected your iOS device to this computer before. Unlock your device and tap Trust.
Learn more about the Trust This Computer alert.Restart your device
Restart your iOS device or reset your iPod.Restart your Mac
Turn your Mac off and back on.Update your software
Check for software updates on your Mac.
Check for an iTunes update.
Check your security software
If you have security software installed, learn how to resolve issues between iTunes and your security software.
Get more help
If you still don't see your device in iTunes, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

Devices no longer connect to my Hub

Similar Messages

Maybe you are looking for