Devices not showing up in client software Administration section

None of our devices are showing in the "devices" portion of the administration section in the client app.
Everything is functioning fine and I can administer devices through SysPrefs, but will eventually need to get back to this setup to add "edit in place" volumes, etc. I've tried refreshing, creating a new device to refresh list and many other things. I can't even search for a device by name in the "devices" section. Again, this is the only place where I can't see them.
Any ideas? Need it back bad!
Ryan

Hey!
Correct, not seeing any devices, but ONLY in the "devices" portion of the client admin. I see all my devices everywhere else and the entire system is functional, except for the fact that I can't get to them through the client admin. I can access it through the Sys Prefs portion of FCS, but need to get into the client admin for "edit in place", etc...
I do have backups from as far as 6 months ago, however - Much has changed on the server and I'd had to have to revert to one of those. Not sure exactly when this issue started, but I've seen it for at least a month.

Similar Messages

Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

Hi,
I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
The Remote Desktop administrator software does not match the installed client software version.
I tried removing the application and reinstalling it to no avail. Any suggestions?
Thanks.
-David J. Eisen

Hi coold88!
I have an article for you that addresses your issue:
Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
http://support.apple.com/kb/HT3596
You will want to make sure you have the latest version of the software as well:
About Apple Remote Desktop 3.7
http://support.apple.com/kb/HT5896
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Device NOT showing up on my monitor when plugged in?

Iphone plugged in.
Device not showing up? Any ideas?

You're welcome.
This link applies to a Mac.
http://support.apple.com/kb/ts1591

Devices not showing up on I-pod, how to disconnect safely?

devices not showing up on I tunes for I pod, how to disconnect I pod safely

I fixed the problem on my own , hey I'm a genius!! I clicked on my i-pod tab on the left column in i tunes and where the options for podcast tab is just changed the sync option to all podcasts instead of last looked at. Now i have all my podcasts in the video podcast menu on my i pod.

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Device not showing in iTunes for 'Wi-Fi Sync' and 'Sync Now' on phone only works(appears dark) when plugged in via USB so kinda defeats object. Any ideas please?

Had the same issue. Tried everything that was posted for troubleshooting bye apple and on the discussions.
Finally, tried something that solved it and it works flawlessly now. I changed my wireless router.
I was using my ISP's supplied ZyXEL PN660 ADLS2+ with Wireless N. Swtiched to an older Linksys WRT160N and it is working beautifully now.
Take a look at your router, make sure the firmware is up to date, and that UPnP is enabled, and if all is correct, and you have done everything else, try another Wireless router if you can.

Firewire device not showing

Greetings
using a G5, tiger 10.4.9
I have been using this computer for many months with no problem using firewire devices. I recently set up a seperate user account on the computer for my daughter. Prior to this ( for many months)I had a fireiwre device - LACIE external HD -connected that would mount each time at startup and show up on the desktop. Now, I can't get the icon on the desktop of the LACIE to show when I startup. I connected a camera to the computer using firewire, but it too would not show ( before it would). When I connected the camera using USB, it showed up on the desktop. Looks like firewire devices not showing. I checkd System Profile and it shows the LACIE device as connected and functioning. But it won't show up on the desktop. Any ideas on why I can't ge the Firewire devices to show on the desktop?
Thank you in advance for you help. . . .
Brian
G5 Dual 2.7 Mac OS X (10.4)
G5 Dual 2.7 Mac OS X (10.4)
G5 Dual 2.7 Mac OS X (10.4)
G5 Dual 2.7 Mac OS X (10.4)

Sounds like you have the name wrong. Open Disk Utility and take a look to verify the volume name. Disk Utility will list the drive itself, then indented below that is the volume name. To verify that you are using the correct name, try launching Terminal and do a list command:
ls -a /Volumes/"Name of Volume"
Hit the return key and see if the contents of the volume are listed. There is a space after "ls" and another after "-a"--if you don't get anything or get an error then you might want to try
ls -a /Volumes
and try copying the name from the list and pasting into the AppleScript.
Francine
Francine
Schwieder

Why does new music downloaded on one device not show up in the library of the other device?, Why does new music downloaded on one device not show up in the library of the other device?

Why does new music purchased on one device not show up in the library of the other?

Hi Bev5638,
Welcome to the Support Communities!
The article below will explain how to set up Automatic Downloads for your computer and devices.
iTunes Store: How to enable Automatic Downloads
http://support.apple.com/kb/ht4539
Cheers,
- Judy

HT6337 Allow handoff between this mac and your iCloud devices not showing up in general preferences

Is anyone not seeing this? the Allow handoff between this mac and your iCloud devices not showing up in general preferences
Imac 2011 21" mid 2011

nevermind, Just figured out that my iMac does not support it. Thanks Apple, once again coming up with stupid functionality that only works when you pay more money. 3yr old machine, I guess I need to send it to scrap heap.

HT4623 My ipod does not show update settings in the About section

My ipod does not show update settings in the About section how can i get the update ios5 in order to get facebook on my ipod how can i do this

To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Photos taken from iOS device not showing up on Macbook??????

I have photo streaming turned "ON" on my iPhone 5, iPad Air and Macbook Pro. For some reason or another I have been having problems getting the pictures to show up on my Mac. The only time I need for this to happen automatically is when I am listing on eBay. For example I took a picture of the item that I want to list from my iPhone 5. Within a few minutes the picture shows up my iPad Air. I am using my Macbook Pro to list the items. It took over an hour for one picture to come over. I called Apple and without having a device that is under the 1 year contract or Applecare they push this support forum on you or pay $19.95 for them to walk you through it.
Before anyone replies, I have made sure that I am signed in under my apple ID on all three devices and have photo stream selected as well. All of my devices are updated to the latest software. Being that I am having problems with my Mac it is version 10.9.4 running Mavericks. If anyone has any definite answers to this problem I am having I would appreciate all the advice I can get.

No offense, but there are not definitive answers when it comes to iCloud.
Reset iCloud.
On your iOS devices, tap Settings > iCloud > Photos then switch Photo Stream off then back on.
On your Mac open System Preferences > iCloud
Deselect the box next to Photos then reselect it.
Give iCloud a few minutes to re sync the data.

Desktop Software 6.0 (PC) does not show OS 6 system software and core applications

I have installed DM 600_b047 on my PC (running WinXP w/ SP3). I have also installed both OS 6.0.0_rel862 and 5.0.0_rel1385 on the same PC. When I connect my Bold 9000 to the PC, DM shows everything that is installed on the device. However, when disconnect the Bold and I connect my Torch 9800, DM shows only the third-party apps installed on the device. DM does not show the System Software, Core Applications, Phone, etc. that are installed on the Torch.
On another PC (also WinXP w/ SP3), I have installed the same DM and OS software. DM on the latter PC shows all System Software, Core Apps, 3rd-party apps, etc. of both the Bold and Torch.
I would appreciate any suggestions how to get my other PC to show all BB software installed on the Torch. I have already uninstalled and reinstalled the DM and OS software on the one PC. It did not resolve my issue.
Thank you.

Here's how I resolved my issue:
1. On the DM's Applications page, click the "Import files" button.
2. Drill down to the folder containing the .alx files of the BB OS. In my case, that would be "C:\Program Files\Common Files\Research In Motion\Shared\Loader Files\9800M_v6.0.0.284_P6.4.0.120"
3. Select the alx files shown.in the files window..
4. Click the "Open" button of the dialog box.
5. Wait for DM to finish processing the selected files.
Voila! Now I see all the apps.
Maybe RIM's software and/or system engineers can explain how the DM software got into the condition where it apparently had not selected the .alx files.

EA4500 Router Device not showing up in device list - Please Help

Hi all
I have an EA4500 and am using Cisco Connect Cloud software. Its working mostly fine except that I have one device on the network that will not show up in the device list. This is not an issue in itself and normally I would ignore (although it used to show up when I forst got the router) however.......
The device is a WDTVLive media unit and required access to windows shares on a media server. Now the WDTVLive device is server an ip address by the router and is available from everywhere on my network but every couple of days it loses the capacity to search windows shares.
I know what you are thinking and I initially thought the same, this is an issue with the WDTVLive box. However one day I spent a few hours trying to resolve (Am an IT Consultant and know a little about networks) and found that I could not fix the issue. I then rebooted the router and it started working. I have since confirmed that every time it breaks I have to reboot the router.
So I kind of think the two issues are linked.
Sorry for the ramble. Can anyone help please.
Thanks in advance
Alan

Further to this issue which I ignored as it did not really cause any issues, I recently clicked a samsung tv device which thinks that is three different devices. It has three lan addresses listed. One of the addresses listed is the original device that will not show up so I suspect that this is why it does not show up.
It seems that I have a conflict but I can find nothing anywhere to allow me to resolve.
I cannot even delete the Samsung TV device as its x button is not editable.
Should I just try removing the cloud connect software. I must admit that I am starting to think that I made a bad decision with this router.
Any help would be greatly appreciated

Devices not showing up in CM

Sometimes all my devices show up int he CM, other times not, when they do not show, I have to "search" for them by the exact name.
We have redunsant CM's and I wonder if this could be some sync issue, or if there is something wrong with my user.
Othwer users on the CM do not experience this problem (to my knowledge)
Best regards
Ole

Hi Ole,
Looks like a bug. Has this happened after upgrading a browser or making any changes to the CM or after deleting a WAE device from CM? There is a known issue where after deleting a WAE device CM page doesn't show any devices. Reload of the CM resolves the issue.
CSCtu31886: No Data shown after deleting WAE from CM
A permanent software fix for this defect is in 5.0.1 and higher. The workaround is to
reload the CM.
Regards,
Kanwal

TAPI Device not showing in application

I've installed the CiscoTSP.exe onto a Windows XP machine and the "CiscoTSP001.tsp" provider is shown in the Windows "Phone and Modem" screen, however, when I run any TAPI application that lists all of the available TAPI line devices, there is no Cisco line device listed (have tried 3 3rd party apps and the windows dialer.exe).
Is there anything else that has to be setup and do you need a valid connection to the CM to get the line device listed?

First of all make sure you are installing the CiscoTSP version for corresponding CCM version.
If you already installed TSP then uninstall it and remove the directory from programe files. Also remove the Cisco Wave driver from Device Manager in Control Panel.
Note that if you install the SimClient software provided by Cisco on the same PC where CiscoTSP is installed. Then TSP will not show devices.
Now restart the PC and install the TSP agian. Hopefully it will work. Try run Phone1.exe application which is widly used among TAPI developers.

Devices not showing in Max

I just tried to install a USB-6251 in my Laptop (Toshiba Tecra S2). The units is detected and the driver installs. It shows up in the device manager as a properly installed device. However, MAX does not show the device. The Laptop has WInXP-Pro, 2GB RAM and LV 8.20.
When I tried the same thing on my desktop, the 6251 installed in the same way, and then the option to run Test Panels showed up and the
unit ran happily.
Incidentally, I have a minor problem with a PCMCIA 6024 which takes a long time to show up under DAQmx in Max, and a PCMCIA -16E4 which insists on showing up under DAQmx as a 6024 (16E4 is not supported by DAQmx). Both show up promptly and work fine under traditional DAQ.
I suspect there is some problem in the device registration part of the WinXP - NI interface. These boards do not list under the add-remove hardware icon either.
Thanks in advance
Sanjay Gupta
Chief Scientific Officer & Ex-Head
Advanced Centre for Materials Science
Indian Institute of Technology
Kanpur 208016
Phones: +91-512-2597830, 3927830(Off), 2574628 (Res), 9336117477 (Mob)
Fax: +91-512-2597459
E-mail: [email protected], [email protected], http://home.iitk.ac.in/~sg

David,
Things have gone from bad to worse. I tried the upgrade in the Laptop with no success, and now the desktop is also playing up.
I have a ner full installation of the Academic Site License- PDS, RT, RIO ... (the works) on both my systems, as I am a regular user of cRIO for almost 1-1/2 years:
The Laptop story now:
1. After upgrading to 8.50 (no problems in the install), MAX still not ssing anything.
2. I tried to close the Configuration Manager it did not even do that. One process (I think mxssvr) did not close.
3. Tried removing MAX. Removed a lot of other things, incl. LabVIEW.
4. Removed the entire NI Install. Removed all NI directories in Program Files, Documents and settings > ... etc. Also, the FPGA directories in c:\ etc.
5. Using Regedit cleaned up virtually all National Instruments entries in the Registry. In otehr words removed all traces of NI software I could.
6. Reinstalled LabVIEW .....
7. Reactivated everything.
8. MAX (4.1) still not working
9. Checked in Admin Tools > Services. Found Configuration Manager and nidevldu not active.
10. Tried to start them. Config Manager does not start (Error 1067: The process terminated unexpectedly). nidevldu does start if started manually.
The Desktop:
1. Everything was fine.
2. Upgraded to DAQmx 8.50 incl MAX 4.2.
3. Now MAX does not work.
4. Admin > Services shows both processes running.
5. Still to try to shut down and manually try and clean up Data.
6. I was looking at some examination solutions and was able to run code (LV legacy) in LV. Could not try out DAQmx as could not do the easy reset from MAX.
I may add that the Laptop has had LV 7.1 (also possibly 7.0), 8.0 (incl. beta), and 8.2! The desktop did not have the 8.0's.
Any ideas! What do I do now. I always have the option of reformatting drive C and starting from scratch, but am loathe to do so. Will take a full working day at least.
Thanks
Sanjay.
Chief Scientific Officer & Ex-Head
Advanced Centre for Materials Science
Indian Institute of Technology
Kanpur 208016
Phones: +91-512-2597830, 3927830(Off), 2574628 (Res), 9336117477 (Mob)
Fax: +91-512-2597459
E-mail: [email protected], [email protected], http://home.iitk.ac.in/~sg

Devices not showing up in client software Administration section

Similar Messages

Maybe you are looking for