Devices not shown in CS lms 3.2

Hi,
LMS 3.2,the devices are not shown in the CS.
In CS Device management no devices are shown(0 devices).But devices are shown in DFM,RME and IPM.
Any help??
Regards,
Channa

HI wass,
Thanks for reply..
Please find the screnshot of device management of dcr and dfm.
Device are shown in the DFM.
Regds,
Channa

Similar Messages

  • Sat P105-S2036 WinVista SD memory card device not shown in WIndows Explorer

    The label on the botton of the laptop says the Model Number is PSPAOU-1W2036. I have had it for about 2 years. It has a single slot SD memory card only reader in the front. During this time till 2 days ago, it ran factory installed Windows XP MCE just fine. This SD reader shows up in Device Manager as well as in My Computer Windows Explorer window as a drive with letter D since I renamed the DVD drive to letter R. During the last two days, I successfully upgraded the operating system to Windows Vista Ultimate. Everything works fine except that the SD memory card reader no longer shows in neither Device Manager, nor Windows Explorer. But the Device Manager does show a working SDA Standard Compliant SD Host Controller, and a nonworking Mass Storage Controller (missing driver) under Other devices (See Attachment 1). What needs to be done to make the SD memory card reader a working device in Windows Vista? Thank to answers in advance.
    Solved!
    Go to Solution.
    Attachments:
    01 Device Manager shows SD Controller but no SD reader device.txt ‏2 KB

    Thanks to Moderator Trina for moving my inquiry to Moved: /t5/General-Technology/Sat-P105-S2036-WinVista-SD-memory-card-device-not-shown-in/m-p/34845#U34845
    There I searched for SD and found co-member kaidssss' 2009 February 27's post "SD memory Cards Slots" which was resolved by Super Contributor Jerry_Lippey in less than 3 hours with this CSD.Toshiba.com driverweb page
    TI Card Reader Driver for Windows Vista/XP at
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/download.jsp?soid=1713025
    THANKS.

  • Trying to sync for the first time to my ipad. device not shown on leftside. i want to sync photos using iphoto.

    trying to sync photos from macbook pro to ipad, first time. What do i do if no device is shown even though it's plugged in, etc?

    Thanks, Jim.  I finally got it all to work after I closed iTunes on both machines, unplugged the iPad, and started from scratch. To anyone else having this problem, if you hit the wrong thing for "device", it disappears totally.
    Gail

  • Ipod shuffle 4th generation device not shown on itunes, not charging. Seeing red light when connecting to USB charger for a few seconds, then nothing. How to fix this?

    My ipod shuffle 4th generation was working fine for a few months. My son then bit the USB charger. I bought a new USB charger, but the shuffle is not charging and not showing up under the devices in itunes. It also doesn't appear in my windows under my computer. Just to note. I also have a new ipod touch. I am able to charge that fine on the same computer using the USB charger. The device (Ipod touch) does show up in windows and in itunes. The shuffle doesn't show in either place.
    I have tried to use the apple support page. I went through each step. I made all of my USB drives not shut down, I had my computer on all night to try and charge the shuffle. All I see is a red light that appears on the shuffle for a few seconds when I first connect the USB charger to the computer. Then, nothing. Since this was working a bit ago, I don't think that I have a defective shuffle. The USB charger is brand new, I just picked it up yesterday from the apple store. I have the short one, and the longer cable as well.
    Any help that you might be able to give to me would be much appreciated. My daughter is missing listening to her music. Thanks!

    Instead of "charger," you should call it the "USB cable" to avoid confusion.  When started reading your post, I was thinking, how can your son break a USB power adapter (the "charger" that plugs into a wall socket) by biting it...
    Since you got the product with the two USB cables at the Apple Store, you have the right replacement (some third-party replacements are for the 2nd gen shuffle and do not work with the 4th gen shuffle).  Make sure you are completely inserting the plug into the headphones jack.  The fit may be tighter than expected, since the connectors are new.
    http://support.apple.com/kb/TS3572
    If you tried both of those cables, it would be unlikely that you got two faulty cables in one package.  If a new USB device has been added to the computer between the time it worked with the old cable and now, there could be a problem on the USB bus (such as not enough power or a device conflict). 
    As a test, you should shut down (power off) the computer and disconnect all USB devices (including any hub), except for standard keyboard and mouse (if used).  Do this to reset the shuffle
    http://support.apple.com/kb/ht1655
    Start up computer, run iTunes, and connect the shuffle by itself to a direct USB port on the computer.

  • Enrolling iOS devices "not shown in Configuration Manager console"

    After successfully enrolled my Windows RT I want to enroll my iOS devices (iPad 1 & iPhone 4). First step is completing the iOS configuration (uploading APN certificate). Next step I associated my devices by installing management
    profiles (https://manage.microsoft.com). All my application appears when starting the Company Portal App but my device will not appear in my Configuration Manager admin console.
    When I select the Support tile in the Company App it says "Name not yet available", I'm not sure if this is a normal behavior?
    Any thoughts/pointers are welcome.
    Regards,
    Ronny de Jong | inovativ.nl | Blog: donnystyle.wordpress.com | Twitter: twitter.com/ronnydejong

    Hi Jon,
    I've installed the iPhone Configuration Utility and collected the logging below as part of enrolling the iOS devices (iPad & iPhone) and installed the Management Profile:
    iPAD
    Feb 22 23:08:36 iPAD profiled[255] <Notice>: (Note ) profiled: Service starting...
    Feb 22 23:08:36 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-a-y-l-o-a-d-s-.-D-e-v-i-c-e-I-n-f-o -q-u-e-u-e-d -f-o-r -i-n-s-t-a-l-l-a-t-i-o-n-.
    Feb 22 23:08:37 iPAD Preferences[256] <Warning>: Splitview controller <PSSplitViewController: 0x24a900> is expected to have a master view controller before its used!
    Feb 22 23:08:38 iPAD Preferences[256] <Warning>: BTM: attaching to BTServer
    Feb 22 23:08:42 iPAD profiled[255] <Notice>: (Note ) MC: Checking for MDM installation...
    Feb 22 23:08:42 iPAD profiled[255] <Notice>: (Note ) MC: ...finished checking for MDM installation.
    Feb 22 23:08:43 iPAD profiled[255] <Notice>: (Note ) MC: Enrolling in OTA Profile service...
    Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
    Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Issued certificate received.
    Feb 22 23:08:51 iPAD profiled[255] <Notice>: (Note ) MC: Retrieving profile from OTA Profile service...
    Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Received final profile: Microsoft.Profiles.MDM
    Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Beginning profile installation...
    Feb 22 23:08:52 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-r-o-f-i-l-e-s-.-M-D-M -i-s -r-e-p-l-a-c-i-n-g -a-n -e-x-i-s-t-i-n-g -p-r-o-f-i-l-e -h-a-v-i-n-g -t-h-e -s-a-m-e -i-d-e-n-t-i-f-i-e-r-.
    Feb 22 23:08:59 iPAD profiled[255] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
    Feb 22 23:09:00 iPAD profiled[255] <Notice>: (Note ) MC: Issued certificate received.
    Feb 22 23:09:01 iPAD profiled[255] <Notice>: (Note ) MC: Profile -M-i-c-r-o-s-o-f-t-.-P-r-o-f-i-l-e-s-.-M-D-M -i-n-s-t-a-l-l-e-d-.
    Feb 22 23:09:01 iPAD profiled[255] <Notice>: (Note ) MC: Removing certificate with persistent ID 69646e7400000000000000a2
    Feb 22 23:09:01 iPAD SpringBoard[51] <Warning>: Reloading and rendering all application icons.
    Feb 22 23:09:02 iPAD profiled[255] <Notice>: (Note ) MC: Removing certificate with persistent ID 69646e74000000000000009f
    Feb 22 23:09:02 iPAD mc_mobile_tunnel[260] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    Feb 22 23:09:02 iPAD mc_mobile_tunnel[260] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    Feb 22 23:09:02 iPAD mc_mobile_tunnel[261] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    Feb 22 23:09:02 iPAD SpringBoard[51] <Warning>: Reloading and rendering all application icons.
    Feb 22 23:09:02 iPAD mc_mobile_tunnel[261] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: mdmd starting...
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Looking for managed app states to clean up
    Feb 22 23:09:03 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
    Feb 22 23:09:03 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
    Feb 22 23:09:03 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
    Feb 22 23:09:03 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Network reachability has changed.
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Network reachability has changed.
    Feb 22 23:09:03 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:09:11 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:09:11 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:09:13 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:09:13 iPAD mdmd[258] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:09:14 iPAD mdmd[258] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:09:14 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
    Feb 22 23:09:14 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
    Feb 22 23:09:14 iPAD com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[258]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
    Feb 22 23:09:14 iPAD mdmd[258] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
    Feb 22 23:09:16 iPAD mdmd[258] <Notice>: (Note ) MDM: mdmd stopping...
    iPhone
    Feb 22 23:23:22 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Checking for MDM installation...
    Feb 22 23:23:22 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: ...finished checking for MDM installation.
    Feb 22 23:23:24 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Enrolling in OTA Profile service...
    Feb 22 23:23:24 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:24  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:29  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
    Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:29  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:29 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Issued certificate received.
    Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Retrieving profile from OTA Profile service...
    Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:30  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Received final profile: Microsoft.Profiles.MDM
    Feb 22 23:23:30 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Beginning profile installation...
    Feb 22 23:23:37 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:37  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:37 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Attempting to retrieve issued certificate...
    Feb 22 23:23:38 iPhone-van-Ronny profiled[1078] <Error>: Feb 22 23:23:38  SecTrustEvaluate  [leaf AnchorTrusted]
    Feb 22 23:23:38 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Issued certificate received.
    Feb 22 23:23:39 iPhone-van-Ronny SpringBoard[67] <Warning>: Reloading and rendering all application icons.
    Feb 22 23:23:39 iPhone-van-Ronny profiled[1078] <Notice>: (Note ) MC: Profile Microsoft.Profiles.MDM installed.
    Feb 22 23:23:40 iPhone-van-Ronny mc_mobile_tunnel[1094] <Notice>: (Note ) MC: mc_mobile_tunnel starting.
    Feb 22 23:23:40 iPhone-van-Ronny mc_mobile_tunnel[1094] <Notice>: (Note ) MC: mc_mobile_tunnel shutting down.
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: mdmd starting...
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Looking for managed app states to clean up
    Feb 22 23:23:41 iPhone-van-Ronny com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[1091]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-dev
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-dev'. APS connections will not persist past process lifetime.
    Feb 22 23:23:41 iPhone-van-Ronny com.apple.launchd[1] (com.apple.managedconfiguration.mdmd[1091]) <Warning>: (com.apple.managedconfiguration.mdmd) Check-in of Mach service failed. Already active: com.apple.managedconfiguration.mdmdpush-prod
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Warning>: Unable to bootstrap_check_in() to namedDelegatePort 'com.apple.managedconfiguration.mdmdpush-prod'. APS connections will not persist past process lifetime.
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Network reachability has changed.
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Network reachability has changed.
    Feb 22 23:23:41 iPhone-van-Ronny awdd[1092] <Error>: libMobileGestalt copySystemVersionDictionaryValue: Could not lookup ReleaseType from system version dictionary
    Feb 22 23:23:41 iPhone-van-Ronny awdd[1092] <Error>: CoreLocation: CLClient is deprecated. Will be obsolete soon.
    Feb 22 23:23:41 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:23:45 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:23:45 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:23:48 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:23:48 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Telling MDM Check-In Server about new device token.
    Feb 22 23:23:49 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: Transaction completed. Status: 200
    Feb 22 23:23:51 iPhone-van-Ronny mdmd[1091] <Notice>: (Note ) MDM: mdmd stopping...
    Thanks,
    Ronny de Jong | inovativ.nl | Blog |
    Twitter

  • USB storage devices not shown in Finder, yet function, and show in System Information?

    Occurring starting about last month, this has gone from a seldom, to all the time situation. plugging in any USB memory device either directly to the computer, or with cables, will allow the files to be accessed/changed/deleted by programs, but the device with it's files will not show in finder. The device shows in System information. I have set Finder to show everything, but they no longer apear. Before failing entirely, I would sometimes have the device show for a short time, then get an "Improper removal" error, without touching the device, after a few moments. All these memory devices still function properly when used in external devices and when direcly accesed by software. Not being able to use finder to modify content is a significant problem.

    Well I'm about out of ideas. Going off what you described, these devices work fine elsewhere and gradually failed on your computer.
    Unless someone else can post other ideas, I only can suggest a reinstall of Lion from scratch. I would make sure I had a good backup from TM and an additional backup of your important files just in case.
    Probably the easiest way would be to make a bootable USB stick or drive to work from. Procedure here: http://osxdaily.com/2011/07/08/make-a-bootable-mac-os-x-10-7-lion-installer-from -a-usb-flash-drive/
    If you can accomplish that, see if you can boot from it. If so, use Disk Utility to erase the main drive and reformat it. Verify the drive is OK. Then quit Disk Utility abd procede to install Lion.
    When the installation is finished, reboot and use Setup Assistant imediately to migrate your user data and applications back from the TM drive. Don't use migration assistant later.
    I doubt it will help since the Comb-Update didn't fix it, but who knows.

  • Devices not shown on sidebar of iMac ie iPod ?

    Hi
    I am going crazy since the update of the software IOS6 onto my ipod. Now my imac do not shaow the device of the ipod [or even the iphone] on the sidebar. So I can't even drag songs from Imac to my ipod!
    Can anyone help please. The old software worked perfectly. Why always change and make things muddled!
    Oscar

    I believe you are talking about iTunes side bar.
    Try to connect it using USB cable and check  will iTunes can see your device(s).
    Reboot your device. And check it over Wifi.

  • ITunes directory on iPod nano device not showned

    I have a iPod naono 4th generation. I nedd to transfer the iPod Music Library from the iPod (using as a disk enabled) to my iTunes library. But following the instructions to do it I must see the iTunes directory on thr iPod nano device. I cannot see this directory on the iPod nano disk. My operating system is Windows XP. How can I visualize the iTunes directory on the iPod nano ? The question is: how I can transfer my music library from the iPod nano 4th generation to my iTunes library ?
    Roberto

    Hello roby000,
    And welcome to Apple Discussions!
    You will also have to show hidden files in order to access the music directly on your iPod. By default, Windows hides hidden files and folders (thus the name). Go to Options (in the Tools menu), and on the View tab, check “Show Hidden Files and Folders”.
    For more help on manually copying music from your iPod to your computer, see this article.
    http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/
    B-rock

  • Dolphin 4.8 mounting devices - not shown in Places

    Hello guys!
    "gvfs" is installed. Then I open "/etc/polkit-1/localauthority.conf.d/50-localauthority.conf" and set "AdminIdentities=unix-user:alex" which is my username.
    Then echo
    [Mount system internal media for group storage]
    Identity=unix-user:alex
    Action=org.freedesktop.udisks.filesystem-*
    ResultAny=yes
    ResultInactive=yes
    ResultActive=yes
    to "/etc/polkit-1/localauthority/50-local.d/mount.pkla".
    I had similar config for KDE 4.7 and dolphin showed all devices in "Places" and was able to mount them at click. Now that I have dolphin 4.8 installed - it doesn't show unmounted devices in "Places" and this config doesn't affect dolphin.
    I didn't install full KDE 'cause I run IceWM. Just basic kdebase-[lib,dolphin,workspace,runtime].
    How to make dolphin show and mount all the storage devices?
    EDIT:
    I forgot to autoload dbus. That's the reason.
    Last edited by Mr. Alex (2012-01-29 13:35:49)

    Hello guys!
    "gvfs" is installed. Then I open "/etc/polkit-1/localauthority.conf.d/50-localauthority.conf" and set "AdminIdentities=unix-user:alex" which is my username.
    Then echo
    [Mount system internal media for group storage]
    Identity=unix-user:alex
    Action=org.freedesktop.udisks.filesystem-*
    ResultAny=yes
    ResultInactive=yes
    ResultActive=yes
    to "/etc/polkit-1/localauthority/50-local.d/mount.pkla".
    I had similar config for KDE 4.7 and dolphin showed all devices in "Places" and was able to mount them at click. Now that I have dolphin 4.8 installed - it doesn't show unmounted devices in "Places" and this config doesn't affect dolphin.
    I didn't install full KDE 'cause I run IceWM. Just basic kdebase-[lib,dolphin,workspace,runtime].
    How to make dolphin show and mount all the storage devices?
    EDIT:
    I forgot to autoload dbus. That's the reason.
    Last edited by Mr. Alex (2012-01-29 13:35:49)

  • LMS 4 Devices added but not shown in inventory

    Hello,
    By reruning discovery with new seeds etc I have more devices discovered.
    Howeverr they are not shown in the inventory, only in the Device Discovery Summary however.
    Any help, is welcome.

    Hi,
    Kindly go to Inventory> Job Browsers> Inventory Collection and create new job for all the devices. Kindly note down the numbers of devices selected for the job.It should show up all the 164devices there.
    Thanks,
    Gaganjeet
    Inventory> Job  Browsers> Inventory Collection

  • TS1369 Hello! I have an Ipod Shuffle 2nd Generation and it is not recognized by my Windows 8 based laptop. An error message of 'USB device not recognized' is shown. I have the latest ITunes version installed, and tested the dock in other pc's.

    Hello!
    I have a problem connecting my Ipod Shuffle 2nd generation to my Windows 8 based laptop. The computer doesn't recognize the Ipod and issues an error message saying 'USB device not recognized'. I tried uninstaling ITunes(latest version) and all other Apple software and reinstaling it back again, checked my USB hubs in the 'Device Manager' section of the Control Panel, you name it.
    I could really use some help solving this.
    I've turned to the troubleshooting section in Apple Support but it has nothing concerning situations in wich the device isn't even shown in the 'My Computer' folder.
    Help a brother out, will you???

    Found a solution in another forum http://en.kioskea.net/forum/affich-63733-ipod-not-detected-on-computer (a few posts down).
    It was for an IPOD so you can see those details in the link.
    Found how to reset a shuffle and inserted it into these instructions - did not have to follow his last steps.
    - Turn off computer.
    - Plug Shuffle into usb.
    - Then you must reset your shuffle
    To reset iPod shuffle:
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible
    Disconnect iPod shuffle from the computer (if connected).
    Move the switch on the iPod shuffle to the OFF position. Note that when iPod shuffle is off, the green stripe by the switch is not visible.
    - Start computer and it should install the usb driver for the ipod automatically.
    - Your i pod will say do not unplug so don't. then open itunes and it will be there.
    I did not have to do these thing below – did not get error message and shuffle was displayed in Itunes. / LMc
    Just remember to not only eject ipod from itunes but stop usb.
    Go to the program icons near the clock and right click the usb icon and "safely remove hardware" will appear and click it.
    Stop it and select "apple ipod".

  • My apple tv3  is not powering on.  Connected with Computer, with micro USB cable with power on, it is not shown in Devices.  How to rectify

    My apple tv3, serial no. C07JWBZ9DRHN is not powering on.  Connected with Computer, with micro USB cable with power on, it is not shown in Devices.  How to rectify

    You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • My MAC is not shown in My Devices in Find My iPhone web

    After installing Lion 10.7.2 I've used the Find My iPhone feature to find my iPhone and my iPad. I've activate in Preferences-iCloud the Find My Mac option but my MAC is not shown in the list of my devices in the web application. Is anything more I have to do in order to this feature work? How can I know if my MAC is in the list but maybe is not possible to locate it? My MAC is connecte to a wifi network.
    Thanks!!

    Mine's the same. I can't locate my Mac Pro, but I can my iPhone and iPad.
    I have "Find my Mac" turned on in preferences, and a picture of it appears on all my devices, and I can send a message to the Pro etc. but it just can't pick up a location.
    I'm baffled.
    Bob.

  • LMS 3.2 Inventory collection - Job timeouts after ~5h, all devices "Not attempted"

    Hello All,
    We have a strange problem with LMS 3.2 regarding Inventory Collection.
    This problem started immediatelly after the LMS installation/upgrade (LMS 3.2 was installed on a new server, and LMS 2.6 database migrated to it).
    All Jobs finish as failed, with all devices "not attempted".
    Job hangs for a five and a half hours and then reports failed status.
    The symptoms are the same for scheduled jobs and manually created jobs.
    I also have opened a TAC case, but it seems that nothing relevant can be found in the IC_Server.log.
    Also, according to a packet capture, it seems that LMS does collect SNMP data from devices after a job is started...
    We tried to upgrade RME 4.3.0 to 4.3.1.
    One Job immediately after the upgrade was succesful (Inventory was collected for manually selected device), but the next day all Inventory Jobs were failing again with the same symptoms...
    Does anyone have a sugestion where to look for a problem trace?
    Thanks in advance!
    Ragards,
    Jasmina

    Hi Jasmina ,
    Please chech the Existing MDF pacakge :
    go to common service > software center > device update >>> check the checkbox for Cisco works common service   and click on check for updates
    --if there is an Update , please upgarde the MDF version..
    --Similarly look for any Available Device Pacakges update for RME , if there are Upgarde all the Device Pacakages ....
    --After all of the above Task is done , Now re-run the Job and it still fails then share the IC_server.log  again..
    Thanks--
    Afroj

  • Lightroom supports my camera Sony A75 not shown in devices

    Cannot download photos from my Sony A7r into Ltr 5.  My camera is not shown under devices?  My camera is supported by Adobe.  Wshat next?

    Hi Fraustene,
    Your second reply came through blank, not sure if you're using email for response or the web client.
    See if these resources help with importing from Camera, Card reader, or from folder on desktop or other local location:
    Lightroom Help | Import photos from a camera or card reader
    Lightroom 5 - Importing Your Images | Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV
    Let us know more details if you still have trouble.
    Regards
    Pete

Maybe you are looking for

  • ExportData exports to the wrong folder

    I have xml of my data being exported and imported to a mapped drive. When I do an import it pulls the xml from the mapped drive as expected. When I export the xml, it exports it to the desktop. I have both in the click events of buttons. I have the e

  • NI DAQmx 9.2.1 driver installation

    Hi, I have installed Labview 8.6 on my PC running on windows 7 32 bits. My PC hangs halfway through the installation of NI DAQmx 9.2.1 driver software. May I know what happened?

  • How to unpartition a  MacBook Pro 2010

    So a few days to ago I had about 90 GB left on my Hardrive so I wanted to partition my hardrive, 55 GB Windows and 35 Mac. But since I had to do something else it was urgent aswell I stopped the partition and now it says I have 56.7 GB left, and no W

  • Subscript out of range

    hi thisis the script i am using to allocate gross invoice percentage for month and total them to show in another row *SELECT (%ENTITY%, "[ID]", "ENTITY", "[ID]='%ENTITY_SET%'") *XDIM_MEMBERSET CATEGORY=ACT *XDIM_MEMBERSET RPTCURRENCY1=LC *XDIM_MEMBER

  • Luxadm probe / Could not find the loop address for  the device at physical path

    Using EMC FibreChannel Disks on a Solaris 10 # luxadm probe No Network Array enclosures found in /dev/es Error: Could not find the loop address for the device at physical path. # echo $? 255 Any ideas how to fix? Thank, Marcel