DF and NDF switching on capture

I wasn't sure why every time I tried to capture from my camcorder, it would capture about 5 mins before reporting dropped frames and freezing. The images were recorded as NDF, yet no matter the NDF setting in the A/V Settings, the timecodes all show the semi-colon in the capture window. Even if I select the firewire basic setting without the NDF setting, I still get the semicolons and it still freezes at about the 5 min mark.
What am I not doing?
Any suggestions?

Leslie Sayer wrote:
I'm using the Sony HVR-Z7U. My scratch disk is on my iMac's hard drive. I capture either by Capture Clip or Capture Now.
Your internal drive is not up to the task of capturing video. One of the major reasons we do not, hardly ever, recommend the iMac for FCP. You will need a second, external FW drive of at least 7200 rpm. But you also need to know how to hook two FW devices up in the correct order. Search the FCP forum for posts about the iMac.
bogiesan

Similar Messages

  • HT5012 I am having difficulty XMIT/REC text messages to family members using Android phones?  I have a 3GB data plan and all switches and buttons are set properly.  Any suggestions?

    I am having difficulty XMIT/REC text messages to family members using Android phones?  I have a 3GB data plan and all switches and buttons are set properly.  Any suggestions?

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

    I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

    It is now confirmed  that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
    Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
    This might be of some interest to you at this time: Life After MobileMe.
    OT

  • How to use Mac Mini's and HD Freeview to capture raw TV satellite feeds in NEW ZEALAND?

    Hello, this is my first post on this kind of forum - I am not very tech savy so go easy on me! Ideally I am hoping someone can offer some constructive advice.
    I am part of a business that captures television off air as part of an ongoing contract. The system was implemented years ago and consists of 12 capture chains which are set-top cable boxes. They are a mix of Freeview NZ (free) and Sky TV (pay) - both on Satellite (Optus B1 I believe). The boxes are connected to Eye TV 250 boxes which are running through mini mac's (Mac OS X 10.5.4) that all have 1TB drives attached.
    We are capturing two hour scheduled harvest stream blocks, and editing the individual programmes out manually, for an average of 15 hours - equivalent to 27GB, per capture chain, per day. While this system works ok it is very labour intensive and we would like to make the system more automated. There are also a few issues which I would really appreciate some guidance or suggestions on:
    1/ Eye TV turns the digital signal from the decoder to analog and then back out to digital again because we are using S-video composite cables. Ideally we would like to capture HD Raw signal with little or no compression at all. We could upgrade to the Eye TV HD box but would prefer not to because.....
    2/ ...Eye TV creates a proprietary file format (Eye TV specific file) that requires exportation to play in QT or VLC and while you can export as MP4 this takes a considerable amount of time. Up to 7 hours for 1 hour of capture - far to slow for our requirements. Therefore we export as a Mpeg Program Stream which slightly compresses the file and spits out an Mpeg 2. IDEALLY we would be creating H.264 files
    3/ We can only export up to 2 hours, 15 minutes of capture (any more than that and the file goes dead (black) from that point on).
    4/ Because we are in little old NZ, Eye TV (North American) won't pick up the local EPG (Electronic Programming Guide). This means all the scheduling has to be done manually and the meta data is not captured.
    So ultimately we would like a system that captures television with little or no compression of the digital signal, in an H.264 format, with the New Zealand EPG (Electronic Programming Guide) available for both scheduling and metadata, that fits within a Mac system, is not Eye TV (or does not create software specific files) AND is cost effective.
    Goodluck.

    Hello & welcome to the foruns!
    Maybe I can help with one facet...
    Just a quick note for people who use Elgato’s EyeTV on their Macs in New Zealand. I’ve got an Automator script here that will fetch a TV schedule and load it into EyeTV. It takes care of deleting the file it downloads but you might need to open it (use the Automator program) to change where it downloads to.
    EyeTV nz epg downloader
    http://craig.stanton.net.nz/2010/05/04/eyetv-epg-for-nz-tv/

  • Scrolling and clicking on link capture

    Hi,
    I'm using Captivate 4.
    When I capture a window in which i'm scrolling to the bottom and then click on a link
    in the bottom of this window, Captivate for some reason doesn't capture the mouse click on this link.
    What i see in the preview is that Captivate captured a click on an area i haven't clicked and
    way above the captured area (which was the bottom of the scrolled window).
    It happens for any scrolled window i capture.
    Captivate for some reason doesn't capture the right clicks after scrolling a window.
    Thanks in advance for any help.

    Welcome to our community
    When you see this thing happening and you know that it fails to capture properly, the next best thing to do is to scroll the window, then press the Print Screen key after you have scrolled it to force Captivate to capture the screen. Then click the mouse.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Can I switch my Apple ID on the same device and purchase software with my other ID that has a different credit card (or iTunes redeemed points) and then switch back to another user ID?

    I have an iPad with an ID that is associated with 1 credit card but I don't wan't to use that credit card to make puchases.  Can I switch to a different user ID and make puchases on a different credit card and/or iTunes redeemed points and then switch back to my original ID (before the 90 days wait period us up)?

    If changing your password does not solve then contact itunes support.
    Click Support at the top of this page, then click the link under Contact Apple Support

  • My I Pad is not charging, it started after the battery went dead while i was playing a game, when i tried charging it all it does is flash the apple icon and it switches off again, help Pliiz

    my Ipad is not charging, it started after the battery died while i was playing a game, when i tried charging its only flashing the apple icon and it switches off again, help PLIIZ

    Not charging
    1. Reset iPad
    2. Try another wall socket
    3. Try another cable (make sure it's an original Apple cable)
    4. Try another charger (make sure it's an original Apple charger)
    5. Clean Lightning port with compress air or new paint brush

  • What are the major differences between a Access Switch and Aggregation Switch w.r.t Carrier Ethernet domain?

    In a Carrier Ethernet domain,Could someone please help me understand what's the basic difference between Access Switch and Aggregation Switch both in terms of s/w and h/w functionalities. MEF deals OAM,CFM, EVC provisioning only at the access edge switches. Do we need to repeat all these at the aggregation level? or  is it just used for routing purpose? Do we have a separate Fault Management at the aggregation level?

    Duplicate posts.  :P
    Go here:  https://supportforums.cisco.com/discussion/12137156/what-are-major-differences-between-access-switch-and-aggregation-switch-wrt

  • Itunes on my Ipad takes me to the American store, tells me I can't access and to switch to the Canadian store.  I am Canadian.  How do I switch?

    Itunes on my Ipad takes me to the American store, tells me I can't access and to switch to the Canadian store.  I am Canadian.  How do I switch?

    Changing App Store Country
    settings/itunes & app store, tap ID, tap view ID, log in, tap country/region then select the country you want
    See "Change your iTunes Store country" > http://support.apple.com/kb/HT1311

  • I was initially in the UK apps store and i switched to the USA apps store with an itunes gift card..since then i cannot see my previous purchases in the UK store,, now i'm back in the UK and want to switch back using a £15 itunes gift card but can't..HELP

    I was initially in the UK apps store and i switched to the USA apps store with a $15 itunes gift card because my credit card from the UK expired..since the switch i couldn't find my previous purchases in the UK store,, now i'm back in the UK and want to switch back using a £15 itunes gift card but whenever i try to switch, itunes tells me i still have credit on my existing US gift card, meanwhile i only have $0.22 which can't buy anything at the apps store..how dow i clear up the balance and switch to the UK apps store...HELP!!!

    You might just have to contact Apple and ask them to remove it (losing it). Usually people clear a balance by buying one song and having the exact remainder charged  to their credit card, but if you don't have a US credit card you cannot do that.
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

  • The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

    The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back

    See  >  Change your iTunes Store country
    Here  >  http://support.apple.com/kb/HT1311
    If necessary Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HT204266 My new iPad, when I try to get something from the Apple Store it tells me that My account isnot vlaid for use inthe U.S.store.  And to switch to the Australian store before purchasing, how do I do this?

    My new iPad, when I try to get something from the Apple Store it tells me that My account i snot vlaid for use in the U.S.store.  And to switch to the Australian store before purchasing, how do I do this?  I am in Australia?

    There are instructions on this page for creating an account without a credit card : http://support.apple.com/kb/HT2534
    You can download a copy of the iPad manual from here : http://support.apple.com/manuals/ipad/

  • Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

    The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white,  goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Whenever I have a pdf document open, and then switch to another tab to view another webpage, the scrolling function on the touchpad will not work. This seems to be a glitch with Mozilla, according to Dell. How do I fix this?

    When I open a pdf document (like an E-version of a newspaper) in Mozilla and then switch to another tab to view another webpage, I am unable to use the scrolling function on the touchpad. I have to use the up and down arrows to get other pages to scroll. When I close that pdf document, everything works fine. I talked with customer support with Dell, and he said it was probably a glitch with Mozilla. So I tried to do the same thing on IE, and there was no problem scrolling with the touchpad while a pdf document was open on another tab. I would like to get a fix for this so I don't have to keep closing open pdf documents in order to scroll with the touchpad while on other tabs. Thank you

    Hi elliezzz,
    If you are having issues with your iPhone not being recognized by iTunes, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Regards,
    - Brenden

  • Airport wifi problems with uverse and gigabit switch resolved

    I think there is a bug in airport firmware 7.6 with how spanning tree works in addition to problems with the Uverse router. Having an Airport with a uverse 2wire 3801 and gigabit switch will not work. Putting the extreme in NAT mode with DMZ plus behind the uverse resolved the problem.
    Network configuration:
    Uverse 2wire 3801 router
        3801 provides prioritization for upstream traffic so skype and VoIP work better when doing a lot of stuff on Internet
    Airport extreme firmware 7.6
    two airport express 802.11n hardwired to extreme. Set up in bridge mode. All access points have same SSID "create a network" to enable roaming. Ignore anything to do with extending a network.  firmware 7.6
    two gigabit switches
        Netgear GS608 - 8 port gigabit switch
        Trendnet TEG-S80g - 8 port gigabit switch
        100BT 5 port switch - did not figure into problem
    Three Uverse set top boxes wired on Ethernet. They have to be wire directly to the 2wire box to work correctly. See: http://forums.att.com/t5/Features-and-How-To/At-amp-t-U-Verse-modem-setup-Airpor t-Extreme/td-p/2300785
    However, you need to be careful to place your own PCs and other internet devices on the network created by your gear (airport extreme in your case), but keep AT&T's set top boxes for the IPTV services IN FRONT of your own router - so they remain on AT&T's provided network.
    So it would work like this ...
    Network 1: 2wire RG (4 lan ports) ->  Any Set tops, and to the WAN port on your AirportExtreme
    Network 2: Airport Extreme LAN ports -> to any computers or internet devices (but not AT&T set top boxes).
    The RG prioritizes the traffic for your Uverse Voice and your Uverse TV ahead of internet data traffic, as it rationalizes data heading out of your home.  If you place your own equipment in that equation (like putting AT&T set top boxes behind your Airport Extreme) the performance and function of your AT&T set top boxes could really flake out on you.
    Symptom:
        Everything would be working fine, then intermittently all my wifi access points would stop working. ~6,000 ms latency, dropped packets. Ethernet worked fine. Here is an example of my macbook pinging the extreme when associated with the extreme over wifi with a strong signal.
    ping: sendto: Host is down
    Request timeout for icmp_seq 23
    Request timeout for icmp_seq 24
    64 bytes from 192.168.1.64: icmp_seq=25 ttl=255 time=267.051 ms
    Request timeout for icmp_seq 26
    Request timeout for icmp_seq 27
    Request timeout for icmp_seq 28
    64 bytes from 192.168.1.64: icmp_seq=26 ttl=255 time=3402.599 ms
    Request timeout for icmp_seq 30
    Request timeout for icmp_seq 31
    Request timeout for icmp_seq 32
    64 bytes from 192.168.1.64: icmp_seq=30 ttl=255 time=3060.673 ms
    64 bytes from 192.168.1.64: icmp_seq=34 ttl=255 time=24.115 ms
    64 bytes from 192.168.1.64: icmp_seq=35 ttl=255 time=31.056 ms
    64 bytes from 192.168.1.64: icmp_seq=36 ttl=255 time=39.828 ms
    Root cause:
        It looks like the 2wire 2801 router has a problem with spanning tree when interoperating with gigabit switches and airports. There is interplay with the airport.
    I did not have this problem until the 7.6 airport firmware. I had been using the Netgear hub for about a year with the extreme in bridge mode. I added the Trendnet hub and upgraded airport firmware at the same time which made fault isolation difficult.
    Problem recreation:
    Set up airport expresses hard wired to extreme
    Connect gigabit switch anywhere to network
    Everything OK
    Dettach one computer from wifi then reattach, then all wifi stops working. It takes a few seconds for the problem to propagate.
    Ethernet still works fine
    Problem Resolution:
    Connect to 2wire with ethernet
    Set 2wire route to have subnet as 192.168.2.x
    Set extreme in NAT mode behind 2wire. It will complain about double NAT. Override the warning. Set the subnet to 192.168.1.x so you don't have to change any static IP addresses. Note that 2wire uses 192.168.1.254 as default route whereas airport uses 192.168.1.1.
    I set DHCP to start at .10 to leave the lower addresses for assigning static IP addresses to computers I want to expose outside the firewall.
    Go into firewall settings. Select airport extreme. Select the bottom setting which is "DMZ Plus". When you go into the airport extreme settings, you will now see that it has the uverse public IP address on its WAN port. NAT port mappings work fine on the extreme behind the 2wire router.

    Keeping this very short here is a summary of the actual problem and solution to allow your Apple Airport Extreme to run in Bridge mode on the same subnet as your uVerse settop boxes (if your Layer 2 switch is configurable). 
    Devices: Uverse, Cisco SG300, and Airport Extreme
    uVerse uses Multicast to broadcast video streams between the uVerse network to the settop box, and from settop box to settop box.
    X number of Multicast Groups are created based on X number of settop boxes you have.  You can see the multicast definitions by logging into the webinterface of the iNid. Each settop box is a member and can choose to display a broadcasted TV stream or not.
    Multicast membership is setup by the use of ICMP messages for IPv4 (MLD for IPv6).  Each of the settop boxes become members of each others multicast group by reporting up to the iNid (MultiCast Proxy).
    In an ideal world a layer 2 switch will track these memberships and only forward a broadcast packet to the ports on the switch to which the settop boxes are connected to.  The switch would do these via snooping on the ICMP packets.  Most switches by default do not do this by default and simply forward the broadcast packett out every one of it's switch ports.
    Here in lies the problem.  Problem is that the Apple AES doesn’t do ICMP snooping / filtering and floods the wireless network with these broadcast streams.
    In order to fix this you must turn on ICMP snooping and filtering on the switch (or buy a switch that does this).  I have a Cisco SG300 and list out the configuration below.
    Other notes:
    Ensure that all Media renderers (settop boxes) and servers are wired directly off the switch and not attached to any of the Airport Express ports.  This way no media transverses the Airport (only control point traffic goes through the WiFi - which is fine).  Obviously if the IGMP snooping switch sees any client requesting Multicast streaming traffic on the same port as the WAP, it will add that Multicast address to the forwarding table for that port, and then, yes it could get flooded.
    Remember, you need to allow some Multicast traffic through your WAP to allow UPnP discovery to work (assuming that you will be using Wireless control points.)
    Read the Multicast chapter in the SG 300 switch Admin Guide as it explains things very well.
    Setting up multicast on the SG300s using the WebUI:
    1. Multicast/Properties/
    Tick enable Bridge Multicast Filtering Status for VLAN 1, and
    set the Forwarding Method to IP Group Address for both IPv4 & IPv6.
    2. Multicast/ IGMP snooping/
    Tick enable IGMP snooping status then select and edit the entry and ensure that IGMP querier status is ticked.
    It's essential for IGMP snooping to work that there must be at least one active IGMP querier on the network - if more than one is enabled, they will carry out an "election" to decide which one should be active (normally the one with the lowest IP address.)
    3. Multicast Router Port
    Set whichever port that is connected to the uVerse iNid to Status which means that it the uVerse router connected to this port is the Multicast Router
    4. Multicast/ Unregistered Multicast
    set all ports to Filtering. (The default is Forwarding.)
    There are a lot of other variables within all the above - the defaults are OK, you should probably leave them alone!
    In the config file you would then expect to see the above appearing as something like this:
    ip igmp snooping
    ip igmp snooping vlan 1
    ip igmp snooping vlan 1 immediate-leave
    interface vlan 1
    bridge multicast mode ipv4-group
    bridge multicast ipv6 mode ip-group
    interface range gi1-10
    bridge multicast unregistered filtering
    ip igmp snooping vlan 1 querier
    ip igmp snooping vlan 1 querier address <IP-Addr>

Maybe you are looking for